1 files changed, 0 insertions, 83 deletions
diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts
deleted file mode 100644
index 7e4ad2aec37..00000000000
--- a/arch/arm/boot/dts/omap3-tobi.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/*
- * Tobi expansion board is manufactured by Gumstix Inc.
- */
-
-#include "omap3-overo.dtsi"
-
-/ {
-	model = "TI OMAP3 Gumstix Overo on Tobi";
-	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
-	leds {
-		compatible = "gpio-leds";
-		heartbeat {
-			label = "overo:red:gpio21";
-			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	vddvario: regulator-vddvario {
-		  compatible = "regulator-fixed";
-		  regulator-name = "vddvario";
-		  regulator-always-on;
-	};
-
-	vdd33a: regulator-vdd33a {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd33a";
-		regulator-always-on;
-	};
-};
-
-&gpmc {
-	ranges = <5 0 0x2c000000 0x1000000>;	/* CS5 */
-
-	ethernet@5,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <42>;
-		gpmc,cs-wr-off-ns = <36>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <12>;
-		gpmc,adv-wr-off-ns = <12>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <42>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <36>;
-		gpmc,rd-cycle-ns = <60>;
-		gpmc,wr-cycle-ns = <54>;
-		gpmc,access-ns = <36>;
-		gpmc,page-burst-access-ns = <0>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <18>;
-		gpmc,wr-access-ns = <42>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;	/* GPIO 176 */
-		reg-io-width = <4>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-};
-
-&mmc3 {
-	status = "disabled";
-};