1 files changed, 38 insertions, 35 deletions

diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi
index c87cfb81612..812df691ae3 100644
--- a/arch/arm/boot/dts/kirkwood-db.dtsi
+++ b/arch/arm/boot/dts/kirkwood-db.dtsi
@@ -12,7 +12,7 @@
  * and 6282 variants of the Marvell Kirkwood Development Board.
  */
 
-/include/ "kirkwood.dtsi"
+#include "kirkwood.dtsi"
 
 / {
 	memory {
@@ -22,10 +22,11 @@
 
 	chosen {
 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
 	};
 
 	ocp@f1000000 {
-		pinctrl@10000 {
+		pin-controller@10000 {
 			pmx_sdio_gpios: pmx-sdio-gpios {
 				marvell,pins = "mpp37", "mpp38";
 				marvell,function = "gpio";
@@ -33,32 +34,7 @@
 		};
 
 		serial@12000 {
-			pinctrl-0 = <&pmx_uart0>;
-			pinctrl-names = "default";
-			clock-frequency = <200000000>;
-			status = "ok";
-		};
-
-		nand@3000000 {
-			pinctrl-0 = <&pmx_nand>;
-			pinctrl-names = "default";
-			chip-delay = <25>;
 			status = "okay";
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x100000>;
-			};
-
-			partition@100000 {
-				label = "uImage";
-				reg = <0x100000 0x400000>;
-			};
-
-			partition@500000 {
-				label = "root";
-				reg = <0x500000 0x1fb00000>;
-			};
 		};
 
 		sata@80000 {
@@ -73,17 +49,44 @@
 		mvsdio@90000 {
 			pinctrl-0 = <&pmx_sdio_gpios>;
 			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 0>;
-			cd-gpios = <&gpio1 6 0>;
+			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			status = "okay";
 		};
+	};
+};
 
-		pcie-controller {
-			status = "okay";
+&nand {
+	chip-delay = <25>;
+	status = "okay";
 
-			pcie@1,0 {
-				status = "okay";
-			};
-		};
+	partition@0 {
+		label = "uboot";
+		reg = <0x0 0x100000>;
+	};
+
+	partition@100000 {
+		label = "uImage";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@500000 {
+		label = "root";
+		reg = <0x500000 0x1fb00000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
 	};
 };