1 files changed, 7 insertions, 76 deletions
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index a42402562b7..9cbdfe7a093 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -11,84 +11,15 @@
  */
 
 /dts-v1/;
-/include/ "imx6q.dtsi"
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sabresd.dtsi"
 
 / {
-	model = "Freescale i.MX6Q SABRE Smart Device Board";
+	model = "Freescale i.MX6 Quad SABRE Smart Device Board";
 	compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+};
 
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				uart1: serial@02020000 {
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_uart1_1>;
-					status = "okay";
-				};
-			};
-
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
-							1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
-							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
-							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
-							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
-							1426 0x80000000	/* MX6Q_PAD_NANDF_D3__GPIO_2_3 */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_1>;
-				phy-mode = "rgmii";
-				status = "okay";
-			};
-
-			usdhc@02194000 { /* uSDHC2 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc2_1>;
-				cd-gpios = <&gpio2 2 0>;
-				wp-gpios = <&gpio2 3 0>;
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_1>;
-				cd-gpios = <&gpio2 0 0>;
-				wp-gpios = <&gpio2 1 0>;
-				status = "okay";
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio1 4 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio1 5 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-		};
-	};
+&sata {
+	status = "okay";
 };