diff options
Diffstat (limited to 'arch/arm/boot/dts/imx51.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx51.dtsi | 421 |
1 files changed, 285 insertions, 136 deletions
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 75d069fcf89..bebbf3ba0d5 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -10,17 +10,32 @@ * http://www.gnu.org/copyleft/gpl.html */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "imx51-pinfunc.h" +#include <dt-bindings/clock/imx5-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { aliases { - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; + i2c0 = &i2c1; + i2c1 = &i2c2; + mmc0 = &esdhc1; + mmc1 = &esdhc2; + mmc2 = &esdhc3; + mmc3 = &esdhc4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &cspi; }; tzic: tz-interrupt-controller@e0000000 { @@ -36,25 +51,66 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; - clock-frequency = <22579200>; + #clock-cells = <0>; + clock-frequency = <0>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + clock-latency = <62500>; + clocks = <&clks IMX5_CLK_CPU_PODF>; + clock-names = "cpu"; + operating-points = < + 166000 1000000 + 600000 1050000 + 800000 1100000 + >; + voltage-tolerance = <5>; + }; + }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + }; + }; + + display-subsystem { + compatible = "fsl,imx-display-subsystem"; + ports = <&ipu_di0>, <&ipu_di1>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -62,6 +118,38 @@ interrupt-parent = <&tzic>; ranges; + iram: iram@1ffe0000 { + compatible = "mmio-sram"; + reg = <0x1ffe0000 0x20000>; + }; + + ipu: ipu@40000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ipu"; + reg = <0x40000000 0x20000000>; + interrupts = <11 10>; + clocks = <&clks IMX5_CLK_IPU_GATE>, + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; + clock-names = "bus", "di0", "di1"; + resets = <&src 2>; + + ipu_di0: port@2 { + reg = <2>; + + ipu_di0_disp0: endpoint { + }; + }; + + ipu_di1: port@3 { + reg = <3>; + + ipu_di1_disp1: endpoint { + }; + }; + }; + aips@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -76,17 +164,26 @@ reg = <0x70000000 0x40000>; ranges; - esdhc@70004000 { /* ESDHC1 */ + esdhc1: esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; + clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; - esdhc@70008000 { /* ESDHC2 */ + esdhc2: esdhc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; + clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; @@ -94,15 +191,21 @@ compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x7000c000 0x4000>; interrupts = <33>; + clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, + <&clks IMX5_CLK_UART3_PER_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; - ecspi@70010000 { /* ECSPI1 */ + ecspi1: ecspi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; reg = <0x70010000 0x4000>; interrupts = <36>; + clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, + <&clks IMX5_CLK_ECSPI1_PER_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -110,54 +213,84 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; + clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; - esdhc@70020000 { /* ESDHC3 */ + esdhc3: esdhc@70020000 { compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; + clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - esdhc@70024000 { /* ESDHC4 */ + esdhc4: esdhc@70024000 { compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; + clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; }; - usb@73f80000 { + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; interrupts = <18>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; - usb@73f80200 { + usbh1: usb@73f80200 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80200 0x0200>; interrupts = <14>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; - usb@73f80400 { + usbh2: usb@73f80400 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80400 0x0200>; interrupts = <16>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; - usb@73f80600 { + usbh3: usb@73f80600 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80600 0x0200>; interrupts = <17>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@73f80800 { + #index-cells = <1>; + compatible = "fsl,imx51-usbmisc"; + reg = <0x73f80800 0x200>; + clocks = <&clks IMX5_CLK_USBOH3_GATE>; + }; + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; @@ -198,139 +331,70 @@ #interrupt-cells = <2>; }; - wdog@73f98000 { /* WDOG1 */ + kpp: kpp@73f94000 { + compatible = "fsl,imx51-kpp", "fsl,imx21-kpp"; + reg = <0x73f94000 0x4000>; + interrupts = <60>; + clocks = <&clks IMX5_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; + clocks = <&clks IMX5_CLK_DUMMY>; }; - wdog@73f9c000 { /* WDOG2 */ + wdog2: wdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; + clocks = <&clks IMX5_CLK_DUMMY>; status = "disabled"; }; - iomuxc@73fa8000 { + gpt: timer@73fa0000 { + compatible = "fsl,imx51-gpt", "fsl,imx31-gpt"; + reg = <0x73fa0000 0x4000>; + interrupts = <39>; + clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, + <&clks IMX5_CLK_GPT_HF_GATE>; + clock-names = "ipg", "per"; + }; + + iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; + }; - audmux { - pinctrl_audmux_1: audmuxgrp-1 { - fsl,pins = < - 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ - 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ - 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ - 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ - >; - }; - }; - - fec { - pinctrl_fec_1: fecgrp-1 { - fsl,pins = < - 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ - 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ - 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ - 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ - 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ - 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ - 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ - 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ - 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ - 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ - 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ - 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ - 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ - 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ - 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ - 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ - 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ - >; - }; - }; - - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = < - 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ - 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ - 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ - >; - }; - }; - - esdhc1 { - pinctrl_esdhc1_1: esdhc1grp-1 { - fsl,pins = < - 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ - 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ - 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ - 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ - 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ - 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ - >; - }; - }; - - esdhc2 { - pinctrl_esdhc2_1: esdhc2grp-1 { - fsl,pins = < - 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ - 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ - 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ - 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ - 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ - 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ - >; - }; - }; - - i2c2 { - pinctrl_i2c2_1: i2c2grp-1 { - fsl,pins = < - 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ - 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ - >; - }; - }; - - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < - 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ - 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ - 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ - 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ - >; - }; - }; - - uart2 { - pinctrl_uart2_1: uart2grp-1 { - fsl,pins = < - 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ - 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ - >; - }; - }; + pwm1: pwm@73fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; + reg = <0x73fb4000 0x4000>; + clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, + <&clks IMX5_CLK_PWM1_HF_GATE>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; - uart3 { - pinctrl_uart3_1: uart3grp-1 { - fsl,pins = < - 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ - 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ - 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ - 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ - >; - }; - }; + pwm2: pwm@73fb8000 { + #pwm-cells = <2>; + compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; + reg = <0x73fb8000 0x4000>; + clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, + <&clks IMX5_CLK_PWM2_HF_GATE>; + clock-names = "ipg", "per"; + interrupts = <94>; }; uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; + clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, + <&clks IMX5_CLK_UART1_PER_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -338,8 +402,24 @@ compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fc0000 0x4000>; interrupts = <32>; + clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, + <&clks IMX5_CLK_UART2_PER_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; + + src: src@73fd0000 { + compatible = "fsl,imx51-src"; + reg = <0x73fd0000 0x4000>; + #reset-cells = <1>; + }; + + clks: ccm@73fd4000{ + compatible = "fsl,imx51-ccm"; + reg = <0x73fd4000 0x4000>; + interrupts = <0 71 0x04 0 72 0x04>; + #clock-cells = <1>; + }; }; aips@80000000 { /* AIPS2 */ @@ -349,46 +429,73 @@ reg = <0x80000000 0x10000000>; ranges; - ecspi@83fac000 { /* ECSPI2 */ + iim: iim@83f98000 { + compatible = "fsl,imx51-iim", "fsl,imx27-iim"; + reg = <0x83f98000 0x4000>; + interrupts = <69>; + clocks = <&clks IMX5_CLK_IIM_GATE>; + }; + + owire: owire@83fa4000 { + compatible = "fsl,imx51-owire", "fsl,imx21-owire"; + reg = <0x83fa4000 0x4000>; + interrupts = <88>; + clocks = <&clks IMX5_CLK_OWIRE_GATE>; + status = "disabled"; + }; + + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; reg = <0x83fac000 0x4000>; interrupts = <37>; + clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, + <&clks IMX5_CLK_ECSPI2_PER_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; - sdma@83fb0000 { + sdma: sdma@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; + clocks = <&clks IMX5_CLK_SDMA_GATE>, + <&clks IMX5_CLK_SDMA_GATE>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi@83fc0000 { + cspi: cspi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; reg = <0x83fc0000 0x4000>; interrupts = <38>; + clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, + <&clks IMX5_CLK_CSPI_IPG_GATE>; + clock-names = "ipg", "per"; status = "disabled"; }; - i2c@83fc4000 { /* I2C2 */ + i2c2: i2c@83fc4000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc4000 0x4000>; interrupts = <63>; + clocks = <&clks IMX5_CLK_I2C2_GATE>; status = "disabled"; }; - i2c@83fc8000 { /* I2C1 */ + i2c1: i2c@83fc8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx51-i2c", "fsl,imx1-i2c"; + compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; reg = <0x83fc8000 0x4000>; interrupts = <62>; + clocks = <&clks IMX5_CLK_I2C1_GATE>; status = "disabled"; }; @@ -396,21 +503,55 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; + clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; - audmux@83fd0000 { + audmux: audmux@83fd0000 { compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; reg = <0x83fd0000 0x4000>; + clocks = <&clks IMX5_CLK_DUMMY>; + clock-names = "audmux"; status = "disabled"; }; - nand@83fdb000 { + weim: weim@83fda000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx51-weim"; + reg = <0x83fda000 0x1000>; + clocks = <&clks IMX5_CLK_EMI_SLOW_GATE>; + ranges = < + 0 0 0xb0000000 0x08000000 + 1 0 0xb8000000 0x08000000 + 2 0 0xc0000000 0x08000000 + 3 0 0xc8000000 0x04000000 + 4 0 0xcc000000 0x02000000 + 5 0 0xce000000 0x02000000 + >; + status = "disabled"; + }; + + nfc: nand@83fdb000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; + clocks = <&clks IMX5_CLK_NFC_GATE>; + status = "disabled"; + }; + + pata: pata@83fe0000 { + compatible = "fsl,imx51-pata", "fsl,imx27-pata"; + reg = <0x83fe0000 0x4000>; + interrupts = <70>; + clocks = <&clks IMX5_CLK_PATA_GATE>; status = "disabled"; }; @@ -418,15 +559,23 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; + clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>; + dmas = <&sdma 46 0 0>, + <&sdma 47 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; - ethernet@83fec000 { + fec: ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; + clocks = <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; + clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; }; |