diff options
Diffstat (limited to 'arch/arm/boot/dts/imx28-evk.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx28-evk.dts | 270 |
1 files changed, 268 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ee520a529cb..e4cc44c9858 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "imx28.dtsi" +#include "imx28.dtsi" / { model = "Freescale i.MX28 Evaluation Kit"; @@ -22,6 +22,13 @@ apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -29,6 +36,7 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; @@ -36,6 +44,125 @@ compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; + }; + + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SSP1_CMD__GPIO_2_13 + MX28_PAD_SSP1_DATA3__GPIO_2_15 + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_SSP1_SCK__GPIO_2_12 + MX28_PAD_PWM3__GPIO_3_28 + MX28_PAD_LCD_RESET__GPIO_3_30 + MX28_PAD_AUART2_RX__GPIO_3_8 + MX28_PAD_AUART2_TX__GPIO_3_9 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_AUART1_TX__GPIO_3_5 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_CE1N__GPMI_CE1N + MX28_PAD_GPMI_RDY1__GPMI_READY1 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + lcd-supply = <®_lcd_3v3>; + display = <&display>; + status = "okay"; + + display: display { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <33500000>; + hactive = <800>; + vactive = <480>; + hback-porch = <89>; + hfront-porch = <164>; + vback-porch = <23>; + vfront-porch = <10>; + hsync-len = <10>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + xceiver-supply = <®_can_3v3>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + xceiver-supply = <®_can_3v3>; status = "okay"; }; }; @@ -54,9 +181,19 @@ status = "okay"; }; + lradc@80050000 { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + }; + i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { @@ -64,23 +201,71 @@ reg = <0x0a>; VDDA-supply = <®_3p3v>; VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; + at24@51 { + compatible = "at24,24c32"; + pagesize = <32>; + reg = <0x51>; }; }; + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + fsl,uart-has-rtscts; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; }; }; ahb@80080000 { + usb0: usb@80080000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_a>; + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; status = "okay"; }; @@ -94,14 +279,76 @@ regulators { compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - reg_3p3v: 3p3v { + reg_3p3v: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; + + reg_lcd_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 0>; + enable-active-high; + }; + + reg_can_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 13 0>; + enable-active-high; + }; + }; sound { @@ -111,4 +358,23 @@ saif-controllers = <&saif0 &saif1>; audio-codec = <&sgtl5000>; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; + + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; |