1 files changed, 117 insertions, 10 deletions

diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index f4e43e38f3a..64bbe46e4f9 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -7,18 +7,26 @@
  * Licensed under GPLv2 or later.
  */
 /dts-v1/;
-/include/ "at91sam9n12.dtsi"
+#include "at91sam9n12.dtsi"
 
 / {
 	model = "Atmel AT91SAM9N12-EK";
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
 	};
 
 	memory {
-		reg = <0x20000000 0x10000000>;
+		reg = <0x20000000 0x8000000>;
+	};
+
+	slow_xtal {
+		clock-frequency = <32768>;
+	};
+
+	main_xtal {
+		clock-frequency = <16000000>;
 	};
 
 	clocks {
@@ -37,14 +45,97 @@
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
+
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f8010000 {
+				status = "okay";
+
+				wm8904: codec@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+
+				qt1070: keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioA>;
+					interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+				};
+			};
+
+			i2c1: i2c@f8014000 {
+				status = "okay";
+			};
+
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_slot0_clk_cmd_dat0
+					&pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioA 7 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PA7 gpio CD pin pull up and deglitch */
+					};
+				};
+
+				qt1070 {
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
+			};
+
+			spi0: spi@f0000000 {
+				status = "okay";
+				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+				m25p80@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <2>;
+			atmel,pmecc-sector-size = <512>;
 			nand-on-flash-bbt;
 			status = "okay";
 		};
+
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
 	};
 
 	leds {
@@ -52,33 +143,49 @@
 
 		d8 {
 			label = "d8";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "mmc0";
 		};
 
 		d9 {
 			label = "d6";
-			gpios = <&pioB 5 1>;
+			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
 			label = "d7";
-			gpios = <&pioB 6 0>;
+			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		enter {
 			label = "Enter";
-			gpios = <&pioB 4 1>;
+			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
 };