diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 260 |
1 files changed, 203 insertions, 57 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9762c84b419..8f90595069a 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -2,6 +2,18 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config ARM_PTDUMP + bool "Export kernel pagetable layout to userspace via debugfs" + depends on DEBUG_KERNEL + select DEBUG_FS + ---help--- + Say Y here if you want to show the kernel pagetable layout in a + debugfs file. This information is only useful for kernel developers + who are working in architecture specific areas of the kernel. + It is probably not a good idea to enable this feature in a production + kernel. + If in doubt, say "N" + config STRICT_DEVMEM bool "Filter access to /dev/mem" depends on MMU @@ -94,6 +106,30 @@ choice depends on ARCH_BCM2835 select DEBUG_UART_PL01X + config DEBUG_BCM_5301X + bool "Kernel low-level debugging on BCM5301X UART1" + depends on ARCH_BCM_5301X + select DEBUG_UART_PL01X + + config DEBUG_BCM_KONA_UART + bool "Kernel low-level debugging messages via BCM KONA UART" + depends on ARCH_BCM_MOBILE + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Broadcom SoC platforms. + This low level debug works for Broadcom + mobile SoCs in the Kona family of chips (e.g. bcm28155, + bcm11351, etc...) + + config DEBUG_BERLIN_UART + bool "Marvell Berlin SoC Debug UART" + depends on ARCH_BERLIN + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Marvell Berlin SoC based platforms. + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -140,15 +176,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART0 serial port on DaVinci DMx devices. - config DEBUG_DAVINCI_TNETV107X_UART1 - bool "Kernel low-level debugging on DaVinci TNETV107x using UART1" - depends on ARCH_DAVINCI_TNETV107X - select DEBUG_UART_8250 - help - Say Y here if you want the debug print routines to direct - their output to UART1 serial port on DaVinci TNETV107X - devices. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -255,6 +282,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX35. + config DEBUG_IMX50_UART + bool "i.MX50 Debug UART" + depends on SOC_IMX50 + help + Say Y here if you want kernel low-level debugging support + on i.MX50. + config DEBUG_IMX51_UART bool "i.MX51 Debug UART" depends on SOC_IMX51 @@ -283,6 +317,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SX_UART + bool "i.MX6SX Debug UART" + depends on SOC_IMX6SX + help + Say Y here if you want kernel low-level debugging support + on i.MX6SX. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -315,42 +356,40 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 + config DEBUG_MSM_UART + bool "Kernel low-level debugging messages via MSM UART" + depends on ARCH_MSM help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to the serial port on MSM devices. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - help - Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 + MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 + MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - help - Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + MSM7X30 0xaca00000 0xe1000000 UART1 + MSM7X30 0xacb00000 0xe1000000 UART2 + MSM7X30 0xacc00000 0xe1000000 UART3 - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the serial port on Qualcomm devices. + + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" @@ -386,6 +425,13 @@ choice when u-boot hands over to the kernel, the system silently crashes, with no serial output at all. + config DEBUG_VF_UART + bool "Vybrid UART" + depends on SOC_VF610 + help + Say Y here if you want kernel low-level debugging support + on Vybrid based platforms. + config DEBUG_NOMADIK_UART bool "Kernel low-level debugging messages via NOMADIK UART" depends on ARCH_NOMADIK @@ -570,6 +616,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -582,6 +629,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -594,6 +642,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -615,6 +664,33 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C2410_UART0 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART1 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART2 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -834,6 +910,20 @@ choice options; the platform specific options are deprecated and will be soon removed. + config DEBUG_LL_UART_EFM32 + bool "Kernel low-level debugging via efm32 UART" + depends on ARCH_EFM32 + help + Say Y here if you want the debug print routines to direct + their output to an UART or USART port on efm32 based + machines. Use the following addresses for DEBUG_UART_PHYS: + + 0x4000c000 | USART0 + 0x4000c400 | USART1 + 0x4000c800 | USART2 + 0x4000e000 | UART0 + 0x4000e400 | UART1 + config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help @@ -852,6 +942,13 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_S3C2410_UART + bool + select DEBUG_S3C24XX_UART + +config DEBUG_S3C24XX_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -862,16 +959,27 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX21_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ + DEBUG_IMX50_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART default 1 depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. +config DEBUG_VF_UART_PORT + int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART + default 1 + range 0 3 + depends on SOC_VF610 + help + Choose UART port on which kernel low-level debug messages + should be output. + config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA @@ -885,27 +993,28 @@ config DEBUG_LL_INCLUDE default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/efm32.S" if DEBUG_LL_UART_EFM32 default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ DEBUG_IMX21_IMX27_UART || \ DEBUG_IMX31_UART || \ DEBUG_IMX35_UART || \ + DEBUG_IMX50_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART - default "debug/msm.S" if DEBUG_MSM_UART1 || \ - DEBUG_MSM_UART2 || \ - DEBUG_MSM_UART3 || \ - DEBUG_MSM8660_UART || \ - DEBUG_MSM8960_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART + default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT + default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" @@ -937,7 +1046,6 @@ config DEBUG_UART_PHYS default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC - default 0x08108300 if DEBUG_DAVINCI_TNETV107X_UART1 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || DEBUG_CNS3XXX || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -946,20 +1054,30 @@ config DEBUG_UART_PHYS default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART default 0x16000000 if ARCH_INTEGRATOR + default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20060000 if DEBUG_RK29_UART0 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0x3e000000 if DEBUG_BCM_KONA_UART + default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI + default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0x7c0003f8 if FOOTBRIDGE - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART + default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xa9a00000 if DEBUG_MSM_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN @@ -973,7 +1091,9 @@ config DEBUG_UART_PHYS default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ ARCH_ORION5X + default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -981,15 +1101,19 @@ config DEBUG_UART_PHYS default 0xfff36000 if DEBUG_HIGHBANK_UART default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_LL_UART_EFM32 || \ + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC + default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 + default 0xf1000300 if DEBUG_BCM_5301X default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -997,8 +1121,16 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) + default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1010,34 +1142,35 @@ config DEBUG_UART_VIRT default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe230000 if DEBUG_PICOXCELL_UART + default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE - default 0xfed60000 if DEBUG_RK29_UART0 - default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 - default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 default 0xfed12000 if ARCH_KIRKWOOD + default 0xfed60000 if DEBUG_RK29_UART0 + default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 + default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0xfedc0000 if ARCH_EP93XX default 0xfee003f8 if FOOTBRIDGE - default 0xfee08300 if DEBUG_DAVINCI_TNETV107X_UART1 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfee82340 if ARCH_IOP13XX default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN + default 0xfef36000 if DEBUG_HIGHBANK_UART default 0xfefff700 if ARCH_IOP33X default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" @@ -1052,7 +1185,8 @@ config DEBUG_UART_8250_WORD default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 + DEBUG_DAVINCI_DA8XX_UART2 || \ + DEBUG_BCM_KONA_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" @@ -1061,7 +1195,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || ARCH_MSM + depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1077,7 +1211,8 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string - default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM + default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ + PLAT_SAMSUNG || ARCH_EFM32 default "mach/uncompress.h" config EARLY_PRINTK @@ -1111,4 +1246,15 @@ config PID_IN_CONTEXTIDR additional instructions during context switch. Say Y here only if you are planning to use hardware trace tools with this kernel. +config DEBUG_SET_MODULE_RONX + bool "Set loadable kernel module data as NX and text as RO" + depends on MODULES + ---help--- + This option helps catch unintended modifications to loadable + kernel module's text and read-only data. It also prevents execution + of module data. Such protection may interfere with run-time code + patching and dynamic kernel tracing - and they might also protect + against certain classes of kernel exploits. + If in doubt, say "N". + endmenu |