aboutsummaryrefslogtreecommitdiff
path: root/Makefile
diff options
context:
space:
mode:
Diffstat (limited to 'Makefile')
-rw-r--r--Makefile1037
1 files changed, 496 insertions, 541 deletions
diff --git a/Makefile b/Makefile
index 1ab3ebfc909..d0901b46b4b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
-VERSION = 2
-PATCHLEVEL = 6
-SUBLEVEL = 29
+VERSION = 3
+PATCHLEVEL = 16
+SUBLEVEL = 0
EXTRAVERSION =
-NAME = Temporary Tasmanian Devil
+NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@@ -16,6 +16,15 @@ NAME = Temporary Tasmanian Devil
# o print "Entering directory ...";
MAKEFLAGS += -rR --no-print-directory
+# Avoid funny character set dependencies
+unexport LC_ALL
+LC_COLLATE=C
+LC_NUMERIC=C
+export LC_COLLATE LC_NUMERIC
+
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
@@ -32,18 +41,62 @@ MAKEFLAGS += -rR --no-print-directory
# descending is started. They are now explicitly listed as the
# prepare rule.
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
-ifdef V
- ifeq ("$(origin V)", "command line")
- KBUILD_VERBOSE = $(V)
- endif
+ifeq ("$(origin V)", "command line")
+ KBUILD_VERBOSE = $(V)
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
+
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
+endif
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
+endif
+endif
+
+export quiet Q KBUILD_VERBOSE
+
# Call a source code checker (by default, "sparse") as part of the
# C compilation.
#
@@ -54,10 +107,8 @@ endif
# See the file "Documentation/sparse.txt" for more details, including
# where to get the "sparse" utility.
-ifdef C
- ifeq ("$(origin C)", "command line")
- KBUILD_CHECKSRC = $(C)
- endif
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
endif
ifndef KBUILD_CHECKSRC
KBUILD_CHECKSRC = 0
@@ -69,12 +120,10 @@ endif
ifdef SUBDIRS
KBUILD_EXTMOD ?= $(SUBDIRS)
endif
-ifdef M
- ifeq ("$(origin M)", "command line")
- KBUILD_EXTMOD := $(M)
- endif
-endif
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
@@ -98,10 +147,8 @@ ifeq ($(KBUILD_SRC),)
# OK, Make called in directory where kernel src resides
# Do we want to locate output files in a separate directory?
-ifdef O
- ifeq ("$(origin O)", "command line")
- KBUILD_OUTPUT := $(O)
- endif
+ifeq ("$(origin O)", "command line")
+ KBUILD_OUTPUT := $(O)
endif
# That's our default target when none is given on the command line
@@ -115,16 +162,23 @@ ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
-KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+ && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
- $(error output directory "$(saved-output)" does not exist))
+ $(error failed to create output directory "$(saved-output)"))
PHONY += $(MAKECMDGOALS) sub-make
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
- $(Q)@:
+ @:
+# Fake the "Entering directory" message once, so that IDEs/editors are
+# able to understand relative filenames.
+ echodir := @echo
+ quiet_echodir := @echo
+silent_echodir := @:
sub-make: FORCE
+ $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
@@ -147,29 +201,38 @@ else
_all: modules
endif
-srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-TOPDIR := $(srctree)
-# FIXME - TOPDIR is obsolete, use srctree/objtree
-objtree := $(CURDIR)
+ifeq ($(KBUILD_SRC),)
+ # building in the source tree
+ srctree := .
+else
+ ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+ # building in a subdirectory of the source tree
+ srctree := ..
+ else
+ srctree := $(KBUILD_SRC)
+ endif
+endif
+objtree := .
src := $(srctree)
obj := $(objtree)
VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
-export srctree objtree VPATH TOPDIR
+export srctree objtree VPATH
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
-# then ARCH is assigned, getting whatever value it gets normally, and
+# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
-SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \
+ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
- -e s/sh.*/sh/ )
+ -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
@@ -187,11 +250,12 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=ia64-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
+# A third alternative is to store a setting in .config so that plain
+# "make" in the configured kernel build directory always uses that.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
-CROSS_COMPILE ?=
+CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%)
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
@@ -206,18 +270,31 @@ ifeq ($(ARCH),x86_64)
endif
# Additional ARCH settings for sparc
+ifeq ($(ARCH),sparc32)
+ SRCARCH := sparc
+endif
ifeq ($(ARCH),sparc64)
SRCARCH := sparc
endif
-# Where to locate arch specific headers
-hdr-arch := $(SRCARCH)
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+ SRCARCH := sh
+endif
-ifeq ($(ARCH),m68knommu)
- hdr-arch := m68k
+# Additional ARCH settings for tile
+ifeq ($(ARCH),tilepro)
+ SRCARCH := tile
+endif
+ifeq ($(ARCH),tilegx)
+ SRCARCH := tile
endif
+# Where to locate arch specific headers
+hdr-arch := $(SRCARCH)
+
KCONFIG_CONFIG ?= .config
+export KCONFIG_CONFIG
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
@@ -226,27 +303,32 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
HOSTCC = gcc
HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
+ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
+HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \
+ -Wno-missing-field-initializers -fno-delete-null-pointer-checks
+endif
+
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
-# If we have only "make modules", don't compile built-in objects.
-# When we're building modules with modversions, we need to consider
-# the built-in objects during the descend as well, in order to
-# make sure the checksums are up to date before we record them.
+# If we have only "make modules", don't compile built-in objects.
+# When we're building modules with modversions, we need to consider
+# the built-in objects during the descend as well, in order to
+# make sure the checksums are up to date before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif
-# If we have "make <whatever> modules", compile modules
-# in addition to whatever we do anyway.
-# Just "make" or "make all" shall build modules as well
+# If we have "make <whatever> modules", compile modules
+# in addition to whatever we do anyway.
+# Just "make" or "make all" shall build modules as well
ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
KBUILD_MODULES := 1
@@ -259,47 +341,15 @@ endif
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-# $(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
- quiet =
- Q =
+ifneq ($(CC),)
+ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1)
+COMPILER := clang
else
- quiet=quiet_
- Q = @
+COMPILER := gcc
endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(findstring s,$(MAKEFLAGS)),)
- quiet=silent_
+export COMPILER
endif
-export quiet Q KBUILD_VERBOSE
-
-
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
@@ -308,7 +358,6 @@ $(srctree)/scripts/Kbuild.include: ;
include $(srctree)/scripts/Kbuild.include
# Make variables (CC, etc...)
-
AS = $(CROSS_COMPILE)as
LD = $(CROSS_COMPILE)ld
CC = $(CROSS_COMPILE)gcc
@@ -320,47 +369,68 @@ OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
GENKSYMS = scripts/genksyms/genksyms
+INSTALLKERNEL := installkernel
DEPMOD = /sbin/depmod
-KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
-Wbitwise -Wno-return-void $(CF)
-MODFLAGS = -DMODULE
-CFLAGS_MODULE = $(MODFLAGS)
-AFLAGS_MODULE = $(MODFLAGS)
+CFLAGS_MODULE =
+AFLAGS_MODULE =
LDFLAGS_MODULE =
CFLAGS_KERNEL =
AFLAGS_KERNEL =
+CFLAGS_GCOV = -fprofile-arcs -ftest-coverage
+
+# Use USERINCLUDE when you must reference the UAPI directories only.
+USERINCLUDE := \
+ -I$(srctree)/arch/$(hdr-arch)/include/uapi \
+ -Iarch/$(hdr-arch)/include/generated/uapi \
+ -I$(srctree)/include/uapi \
+ -Iinclude/generated/uapi \
+ -include $(srctree)/include/linux/kconfig.h
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-LINUXINCLUDE := -Iinclude \
- $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) \
- -I$(srctree)/arch/$(hdr-arch)/include \
- -include include/linux/autoconf.h
+LINUXINCLUDE := \
+ -I$(srctree)/arch/$(hdr-arch)/include \
+ -Iarch/$(hdr-arch)/include/generated \
+ $(if $(KBUILD_SRC), -I$(srctree)/include) \
+ -Iinclude \
+ $(USERINCLUDE)
KBUILD_CPPFLAGS := -D__KERNEL__
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
- -Werror-implicit-function-declaration
+ -Werror-implicit-function-declaration \
+ -Wno-format-security
+
+KBUILD_AFLAGS_KERNEL :=
+KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__
+KBUILD_AFLAGS_MODULE := -DMODULE
+KBUILD_CFLAGS_MODULE := -DMODULE
+KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
-KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
-export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
+export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
+export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
+export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
@@ -369,8 +439,11 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
+export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
+ -name CVS -o -name .pc -o -name .hg -o -name .git \) \
+ -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
+ --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
@@ -379,6 +452,7 @@ export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exc
PHONY += scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
+ $(Q)rm -f .tmp_quiet_recordmcount
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;
@@ -394,6 +468,14 @@ ifneq ($(KBUILD_SRC),)
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
endif
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+ src=asm obj=arch/$(SRCARCH)/include/generated/asm
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+ src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm
+
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
@@ -402,10 +484,12 @@ endif
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
+version_h := include/generated/uapi/linux/version.h
+
no-dot-config-targets := clean mrproper distclean \
- cscope TAGS tags help %docs check% \
- include/linux/version.h headers_% \
- kernelrelease kernelversion
+ cscope gtags TAGS tags help %docs check% coccicheck \
+ $(version_h) headers_% archheaders archscripts \
+ kernelversion %src-pkg
config-targets := 0
mixed-targets := 0
@@ -431,8 +515,16 @@ ifeq ($(mixed-targets),1)
# We're called with mixed targets (*config and build targets).
# Handle them one by one.
-%:: FORCE
- $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
+PHONY += $(MAKECMDGOALS) __build_one_by_one
+
+$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one
+ @:
+
+__build_one_by_one:
+ $(Q)set -e; \
+ for i in $(MAKECMDGOALS); do \
+ $(MAKE) -f $(srctree)/Makefile $$i; \
+ done
else
ifeq ($(config-targets),1)
@@ -447,11 +539,9 @@ include $(srctree)/arch/$(SRCARCH)/Makefile
export KBUILD_DEFCONFIG KBUILD_KCONFIG
config: scripts_basic outputmakefile FORCE
- $(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
%config: scripts_basic outputmakefile FORCE
- $(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
else
@@ -464,7 +554,8 @@ ifeq ($(KBUILD_EXTMOD),)
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
PHONY += scripts
-scripts: scripts_basic include/config/auto.conf
+scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
+ asm-generic
$(Q)$(MAKE) $(build)=$(@)
# Objects we will link into vmlinux / subdirs we need to visit
@@ -491,20 +582,20 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
# with it and forgot to run make oldconfig.
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
-include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
+include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
-# external modules needs include/linux/autoconf.h and include/config/auto.conf
+# external modules needs include/generated/autoconf.h and include/config/auto.conf
# but do not care if they are up-to-date. Use auto.conf to trigger the test
PHONY += include/config/auto.conf
include/config/auto.conf:
- $(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
- echo; \
- echo " ERROR: Kernel configuration is invalid."; \
- echo " include/linux/autoconf.h or $@ are missing."; \
- echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
- echo; \
+ $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \
+ echo >&2; \
+ echo >&2 " ERROR: Kernel configuration is invalid."; \
+ echo >&2 " include/generated/autoconf.h or $@ are missing.";\
+ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
+ echo >&2 ; \
/bin/false)
endif # KBUILD_EXTMOD
@@ -517,38 +608,110 @@ endif # $(dot-config)
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
-# Defaults vmlinux but it is usually overridden in the arch makefile
+# Defaults to vmlinux, but the arch makefile usually adds further targets
all: vmlinux
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
+KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
+
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS += -Os
+KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
else
KBUILD_CFLAGS += -O2
endif
-include $(srctree)/arch/$(SRCARCH)/Makefile
+ifdef CONFIG_READABLE_ASM
+# Disable optimizations that make assembler listings hard to read.
+# reorder blocks reorders the control in the function
+# ipa clone creates specialized cloned functions
+# partial inlining inlines only parts of functions
+KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
+ $(call cc-option,-fno-ipa-cp-clone,) \
+ $(call cc-option,-fno-partial-inlining)
+endif
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
-# Force gcc to behave correct even for buggy distributions
-# Arch Makefiles may override this setting
-KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
+# Handle stack protector mode.
+ifdef CONFIG_CC_STACKPROTECTOR_REGULAR
+ stackp-flag := -fstack-protector
+ ifeq ($(call cc-option, $(stackp-flag)),)
+ $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \
+ -fstack-protector not supported by compiler)
+ endif
+else
+ifdef CONFIG_CC_STACKPROTECTOR_STRONG
+ stackp-flag := -fstack-protector-strong
+ ifeq ($(call cc-option, $(stackp-flag)),)
+ $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \
+ -fstack-protector-strong not supported by compiler)
+ endif
+else
+ # Force off for distro compilers that enable stack protector by default.
+ stackp-flag := $(call cc-option, -fno-stack-protector)
+endif
+endif
+KBUILD_CFLAGS += $(stackp-flag)
+
+ifeq ($(COMPILER),clang)
+KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,)
+KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable)
+KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier)
+KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
+# Quiet clang warning: comparison of unsigned expression < 0 is always false
+KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare)
+# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the
+# source of a reference will be _MergedGlobals and not on of the whitelisted names.
+# See modpost pattern 2
+KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,)
+else
+
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
else
+# Some targets (ARM with Thumb2, for example), can't be built with frame
+# pointers. For those, we don't have FUNCTION_TRACER automatically
+# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
+# incompatible with -fomit-frame-pointer with current GCC, so we don't use
+# -fomit-frame-pointer with FUNCTION_TRACER.
+ifndef CONFIG_FUNCTION_TRACER
KBUILD_CFLAGS += -fomit-frame-pointer
endif
+endif
+
+KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
ifdef CONFIG_DEBUG_INFO
KBUILD_CFLAGS += -g
-KBUILD_AFLAGS += -gdwarf-2
+KBUILD_AFLAGS += -Wa,-gdwarf-2
+endif
+
+ifdef CONFIG_DEBUG_INFO_REDUCED
+KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \
+ $(call cc-option,-fno-var-tracking)
endif
ifdef CONFIG_FUNCTION_TRACER
-KBUILD_CFLAGS += -pg
+ifdef CONFIG_HAVE_FENTRY
+CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY)
+endif
+KBUILD_CFLAGS += -pg $(CC_USING_FENTRY)
+KBUILD_AFLAGS += $(CC_USING_FENTRY)
+ifdef CONFIG_DYNAMIC_FTRACE
+ ifdef CONFIG_HAVE_C_RECORDMCOUNT
+ BUILD_C_RECORDMCOUNT := y
+ export BUILD_C_RECORDMCOUNT
+ endif
+endif
endif
# We trigger additional mismatches with less inlining
@@ -564,38 +727,48 @@ CHECKFLAGS += $(NOSTDINC_FLAGS)
KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
# disable pointer signed / unsigned warnings in gcc 4.0
-KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
-# disable invalid "can't wrap" optimzations for signed / pointers
-KBUILD_CFLAGS += $(call cc-option,-fwrapv)
+# disable invalid "can't wrap" optimizations for signed / pointers
+KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
-# revert to pre-gcc-4.4 behaviour of .eh_frame
-KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+# conserve stack if available
+KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
-# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
-# But warn user when we do so
-warn-assign = \
-$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)")
+# disallow errors like 'EXPORT_GPL(foo);' with missing header
+KBUILD_CFLAGS += $(call cc-option,-Werror=implicit-int)
-ifneq ($(KCPPFLAGS),)
- $(call warn-assign,CPPFLAGS)
- KBUILD_CPPFLAGS += $(KCPPFLAGS)
-endif
-ifneq ($(KAFLAGS),)
- $(call warn-assign,AFLAGS)
- KBUILD_AFLAGS += $(KAFLAGS)
-endif
-ifneq ($(KCFLAGS),)
- $(call warn-assign,CFLAGS)
- KBUILD_CFLAGS += $(KCFLAGS)
+# require functions to have arguments in prototypes, not empty 'int foo()'
+KBUILD_CFLAGS += $(call cc-option,-Werror=strict-prototypes)
+
+# Prohibit date/time macros, which would make the build non-deterministic
+KBUILD_CFLAGS += $(call cc-option,-Werror=date-time)
+
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
+# check for 'asm goto'
+ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
+ KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
endif
+include $(srctree)/scripts/Makefile.extrawarn
+
+# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
+KBUILD_CPPFLAGS += $(KCPPFLAGS)
+KBUILD_AFLAGS += $(KAFLAGS)
+KBUILD_CFLAGS += $(KCFLAGS)
+
# Use --build-id when available.
LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
- $(call ld-option, -Wl$(comma)--build-id,))
-LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
+ $(call cc-ldoption, -Wl$(comma)--build-id,))
+KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux += $(call ld-option, -X,)
+endif
+
# Default kernel image to build when no specific target is given.
# KBUILD_IMAGE may be overruled on the command line or
# set in the environment
@@ -609,6 +782,13 @@ export KBUILD_IMAGE ?= vmlinux
export INSTALL_PATH ?= /boot
#
+# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots.
+# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as
+# an argument if needed. Otherwise it defaults to the kernel install path
+#
+export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE)
+
+#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
# makefile but the argument can be passed to make if needed.
@@ -618,10 +798,10 @@ MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
#
-# INSTALL_MOD_STRIP, if defined, will cause modules to be
-# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
-# the default option --strip-debug will be used. Otherwise,
-# INSTALL_MOD_STRIP will used as the options to the strip command.
+# INSTALL_MOD_STRIP, if defined, will cause modules to be
+# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
+# the default option --strip-debug will be used. Otherwise,
+# INSTALL_MOD_STRIP value will be used as the options to the strip command.
ifdef INSTALL_MOD_STRIP
ifeq ($(INSTALL_MOD_STRIP),1)
@@ -634,6 +814,29 @@ mod_strip_cmd = true
endif # INSTALL_MOD_STRIP
export mod_strip_cmd
+# Select initial ramdisk compression format, default is gzip(1).
+# This shall be used by the dracut(8) tool while creating an initramfs image.
+#
+INITRD_COMPRESS-y := gzip
+INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2
+INITRD_COMPRESS-$(CONFIG_RD_LZMA) := lzma
+INITRD_COMPRESS-$(CONFIG_RD_XZ) := xz
+INITRD_COMPRESS-$(CONFIG_RD_LZO) := lzo
+INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4
+# do not export INITRD_COMPRESS, since we didn't actually
+# choose a sane default compression above.
+# export INITRD_COMPRESS := $(INITRD_COMPRESS-y)
+
+ifdef CONFIG_MODULE_SIG_ALL
+MODSECKEY = ./signing_key.priv
+MODPUBKEY = ./signing_key.x509
+export MODPUBKEY
+mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY)
+else
+mod_sign_cmd = true
+endif
+export mod_sign_cmd
+
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/
@@ -655,184 +858,23 @@ libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
libs-y := $(libs-y1) $(libs-y2)
-# Build vmlinux
-# ---------------------------------------------------------------------------
-# vmlinux is built from the objects selected by $(vmlinux-init) and
-# $(vmlinux-main). Most are built-in.o files from top-level directories
-# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
-# Ordering when linking is important, and $(vmlinux-init) must be first.
-#
-# vmlinux
-# ^
-# |
-# +-< $(vmlinux-init)
-# | +--< init/version.o + more
-# |
-# +--< $(vmlinux-main)
-# | +--< driver/built-in.o mm/built-in.o + more
-# |
-# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
-#
-# vmlinux version (uname -v) cannot be updated during normal
-# descending-into-subdirs phase since we do not yet know if we need to
-# update vmlinux.
-# Therefore this step is delayed until just before final link of vmlinux -
-# except in the kallsyms case where it is done just before adding the
-# symbols to the kernel.
-#
-# System.map is generated to document addresses of all kernel symbols
-
-vmlinux-init := $(head-y) $(init-y)
-vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
-vmlinux-all := $(vmlinux-init) $(vmlinux-main)
-vmlinux-lds := arch/$(SRCARCH)/kernel/vmlinux.lds
-export KBUILD_VMLINUX_OBJS := $(vmlinux-all)
-
-# Rule to link vmlinux - also used during CONFIG_KALLSYMS
-# May be overridden by arch/$(ARCH)/Makefile
-quiet_cmd_vmlinux__ ?= LD $@
- cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
- -T $(vmlinux-lds) $(vmlinux-init) \
- --start-group $(vmlinux-main) --end-group \
- $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o FORCE ,$^)
-
-# Generate new vmlinux version
-quiet_cmd_vmlinux_version = GEN .version
- cmd_vmlinux_version = set -e; \
- if [ ! -r .version ]; then \
- rm -f .version; \
- echo 1 >.version; \
- else \
- mv .version .old_version; \
- expr 0$$(cat .old_version) + 1 >.version; \
- fi; \
- $(MAKE) $(build)=init
-
-# Generate System.map
-quiet_cmd_sysmap = SYSMAP
- cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
-
-# Link of vmlinux
-# If CONFIG_KALLSYMS is set .version is already updated
-# Generate System.map and verify that the content is consistent
-# Use + in front of the vmlinux_version rule to silent warning with make -j2
-# First command is ':' to allow us to use + in front of the rule
-define rule_vmlinux__
- :
- $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
-
- $(call cmd,vmlinux__)
- $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
-
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) System.map' &&) \
- $(cmd_sysmap) $@ System.map; \
- if [ $$? -ne 0 ]; then \
- rm -f $@; \
- /bin/false; \
- fi;
- $(verify_kallsyms)
-endef
-
-
-ifdef CONFIG_KALLSYMS
-# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
-# It's a three stage process:
-# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
-# empty
-# Running kallsyms on that gives us .tmp_kallsyms1.o with
-# the right size - vmlinux version (uname -v) is updated during this step
-# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
-# but due to the added section, some addresses have shifted.
-# From here, we generate a correct .tmp_kallsyms2.o
-# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
-# o Verify that the System.map from vmlinux matches the map from
-# .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
-# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
-# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
-# temporary bypass to allow the kernel to be built while the
-# maintainers work out what went wrong with kallsyms.
-
-ifdef CONFIG_KALLSYMS_EXTRA_PASS
-last_kallsyms := 3
-else
-last_kallsyms := 2
-endif
-
-kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
-
-define verify_kallsyms
- $(Q)$(if $($(quiet)cmd_sysmap), \
- echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
- $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
- $(Q)cmp -s System.map .tmp_System.map || \
- (echo Inconsistent kallsyms data; \
- echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
- rm .tmp_kallsyms* ; /bin/false )
-endef
-
-# Update vmlinux version before link
-# Use + in front of this rule to silent warning about make -j1
-# First command is ':' to allow us to use + in front of this rule
-cmd_ksym_ld = $(cmd_vmlinux__)
-define rule_ksym_ld
- :
- +$(call cmd,vmlinux_version)
- $(call cmd,vmlinux__)
- $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
-endef
-
-# Generate .S file with all kernel symbols
-quiet_cmd_kallsyms = KSYM $@
- cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
- $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
-
-.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
- $(call if_changed_dep,as_o_S)
-
-.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
- $(call cmd,kallsyms)
+# Externally visible symbols (used by link-vmlinux.sh)
+export KBUILD_VMLINUX_INIT := $(head-y) $(init-y)
+export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y)
+export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds
+export LDFLAGS_vmlinux
+# used by scripts/pacmage/Makefile
+export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools virt)
-# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
- $(call if_changed_rule,ksym_ld)
+vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN)
-.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
- $(call if_changed,vmlinux__)
+# Final link of vmlinux
+ cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux)
+quiet_cmd_link-vmlinux = LINK $@
-.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
- $(call if_changed,vmlinux__)
-
-# Needs to visit scripts/ before $(KALLSYMS) can be used.
-$(KALLSYMS): scripts ;
-
-# Generate some data for debugging strange kallsyms problems
-debug_kallsyms: .tmp_map$(last_kallsyms)
-
-.tmp_map%: .tmp_vmlinux% FORCE
- ($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
-
-.tmp_map3: .tmp_map2
-
-.tmp_map2: .tmp_map1
-
-endif # ifdef CONFIG_KALLSYMS
-
-# Do modpost on a prelinked vmlinux. The finally linked vmlinux has
-# relevant sections renamed as per the linker script.
-quiet_cmd_vmlinux-modpost = LD $@
- cmd_vmlinux-modpost = $(LD) $(LDFLAGS) -r -o $@ \
- $(vmlinux-init) --start-group $(vmlinux-main) --end-group \
- $(filter-out $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
-define rule_vmlinux-modpost
- :
- +$(call cmd,vmlinux-modpost)
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost $@
- $(Q)echo 'cmd_$@ := $(cmd_vmlinux-modpost)' > $(dot-target).cmd
-endef
-
-# vmlinux image - including updated kernel symbols
-vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) vmlinux.o $(kallsyms.o) FORCE
+# Include targets which we want to
+# execute if the rest of the kernel build went well.
+vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE
ifdef CONFIG_HEADERS_CHECK
$(Q)$(MAKE) -f $(srctree)/Makefile headers_check
endif
@@ -842,22 +884,11 @@ endif
ifdef CONFIG_BUILD_DOCSRC
$(Q)$(MAKE) $(build)=Documentation
endif
- $(call vmlinux-modpost)
- $(call if_changed_rule,vmlinux__)
- $(Q)rm -f .old_version
-
-# build vmlinux.o first to catch section mismatch errors early
-ifdef CONFIG_KALLSYMS
-.tmp_vmlinux1: vmlinux.o
-endif
+ +$(call if_changed,link-vmlinux)
-modpost-init := $(filter-out init/built-in.o, $(vmlinux-init))
-vmlinux.o: $(modpost-init) $(vmlinux-main) FORCE
- $(call if_changed_rule,vmlinux-modpost)
-
-# The actual objects are generated when descending,
+# The actual objects are generated when descending,
# make sure no implicit rule kicks in
-$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
+$(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Preset locale variables to speed up the build process. Limit locale
@@ -869,69 +900,13 @@ PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
-# Build the kernel release string
-#
-# The KERNELRELEASE value built here is stored in the file
-# include/config/kernel.release, and is used when executing several
-# make targets, such as "make install" or "make modules_install."
-#
-# The eventual kernel release string consists of the following fields,
-# shown in a hierarchical format to show how smaller parts are concatenated
-# to form the larger and final value, with values coming from places like
-# the Makefile, kernel config options, make command line options and/or
-# SCM tag information.
-#
-# $(KERNELVERSION)
-# $(VERSION) eg, 2
-# $(PATCHLEVEL) eg, 6
-# $(SUBLEVEL) eg, 18
-# $(EXTRAVERSION) eg, -rc6
-# $(localver-full)
-# $(localver)
-# localversion* (files without backups, containing '~')
-# $(CONFIG_LOCALVERSION) (from kernel config setting)
-# $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set)
-# ./scripts/setlocalversion (SCM tag, if one exists)
-# $(LOCALVERSION) (from make command line if provided)
-#
-# Note how the final $(localver-auto) string is included *only* if the
-# kernel config option CONFIG_LOCALVERSION_AUTO is selected. Also, at the
-# moment, only git is supported but other SCMs can edit the script
-# scripts/setlocalversion and add the appropriate checks as needed.
-
-pattern = ".*/localversion[^~]*"
-string = $(shell cat /dev/null \
- `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort -u`)
-
-localver = $(subst $(space),, $(string) \
- $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
-
-# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
-# and if the SCM is know a tag from the SCM is appended.
-# The appended tag is determined by the SCM used.
-#
-# .scmversion is used when generating rpm packages so we do not loose
-# the version information from the SCM when we do the build of the kernel
-# from the copied source
-ifdef CONFIG_LOCALVERSION_AUTO
-
-ifeq ($(wildcard .scmversion),)
- _localver-auto = $(shell $(CONFIG_SHELL) \
- $(srctree)/scripts/setlocalversion $(srctree))
-else
- _localver-auto = $(shell cat .scmversion 2> /dev/null)
-endif
-
- localver-auto = $(LOCALVERSION)$(_localver-auto)
-endif
-
-localver-full = $(localver)$(localver-auto)
+define filechk_kernel.release
+ echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+endef
-# Store (new) KERNELRELASE string in include/config/kernel.release
-kernelrelease = $(KERNELVERSION)$(localver-full)
+# Store (new) KERNELRELEASE string in include/config/kernel.release
include/config/kernel.release: include/config/auto.conf FORCE
- $(Q)rm -f $@
- $(Q)echo $(kernelrelease) > $@
+ $(call filechk,kernel.release)
# Things we need to do before we recursively start building the kernel
@@ -946,78 +921,31 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
-# 2) Create the include2 directory, used for the second asm symlink
prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
@$(kecho) ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
- echo " $(srctree) is not clean, please run 'make mrproper'";\
- echo " in the '$(srctree)' directory.";\
+ echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \
+ echo >&2 " in the '$(srctree)' directory.";\
/bin/false; \
fi;
- $(Q)if [ ! -d include2 ]; then \
- mkdir -p include2; \
- ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm; \
- fi
endif
# prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile asm-generic
-prepare1: prepare2 include/linux/version.h include/linux/utsrelease.h \
- include/asm include/config/auto.conf
+prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
+ include/config/auto.conf
$(cmd_crmodverdir)
-archprepare: prepare1 scripts_basic
+archprepare: archheaders archscripts prepare1 scripts_basic
prepare0: archprepare FORCE
$(Q)$(MAKE) $(build)=.
- $(Q)$(MAKE) $(build)=. missing-syscalls
# All the preparing..
prepare: prepare0
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
-
-export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-
-# The asm symlink changes when $(ARCH) changes.
-# Detect this and ask user to run make mrproper
-# If asm is a stale symlink (point to dir that does not exist) remove it
-define check-symlink
- set -e; \
- if [ -L include/asm ]; then \
- asmlink=`readlink include/asm | cut -d '-' -f 2`; \
- if [ "$$asmlink" != "$(SRCARCH)" ]; then \
- echo "ERROR: the symlink $@ points to asm-$$asmlink but asm-$(SRCARCH) was expected"; \
- echo " set ARCH or save .config and run 'make mrproper' to fix it"; \
- exit 1; \
- fi; \
- test -e $$asmlink || rm include/asm; \
- elif [ -d include/asm ]; then \
- echo "ERROR: $@ is a directory but a symlink was expected";\
- exit 1; \
- fi
-endef
-
-# We create the target directory of the symlink if it does
-# not exist so the test in check-symlink works and we have a
-# directory for generated filesas used by some architectures.
-define create-symlink
- if [ ! -L include/asm ]; then \
- $(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \
- if [ ! -d include/asm-$(SRCARCH) ]; then \
- mkdir -p include/asm-$(SRCARCH); \
- fi; \
- ln -fsn asm-$(SRCARCH) $@; \
- fi
-endef
-
-include/asm: FORCE
- $(Q)$(check-symlink)
- $(Q)$(create-symlink)
-
# Generate some files
# ---------------------------------------------------------------------------
@@ -1034,20 +962,21 @@ define filechk_utsrelease.h
endef
define filechk_version.h
- (echo \#define LINUX_VERSION_CODE $(shell \
- expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \
+ (echo \#define LINUX_VERSION_CODE $(shell \
+ expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';)
endef
-include/linux/version.h: $(srctree)/Makefile FORCE
+$(version_h): $(srctree)/Makefile FORCE
$(call filechk,version.h)
-include/linux/utsrelease.h: include/config/kernel.release FORCE
+include/generated/utsrelease.h: include/config/kernel.release FORCE
$(call filechk,utsrelease.h)
PHONY += headerdep
headerdep:
- $(Q)find include/ -name '*.h' | xargs --max-args 1 scripts/headerdep.pl
+ $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \
+ $(srctree)/scripts/headerdep.pl -I$(srctree)/include
# ---------------------------------------------------------------------------
@@ -1072,18 +1001,19 @@ firmware_install: FORCE
export INSTALL_HDR_PATH = $(objtree)/usr
hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
-# Find out where the Kbuild file is located to support
-# arch/$(ARCH)/include/asm
-hdr-dir = $(strip \
- $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild), \
- arch/$(hdr-arch)/include/asm, include/asm-$(hdr-arch)))
# If we do an all arch process set dst to asm-$(hdr-arch)
hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
+PHONY += archheaders
+archheaders:
+
+PHONY += archscripts
+archscripts:
+
PHONY += __headers
-__headers: include/linux/version.h scripts_basic FORCE
- $(Q)$(MAKE) $(build)=scripts scripts/unifdef
+__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE
+ $(Q)$(MAKE) $(build)=scripts build_unifdef
PHONY += headers_install_all
headers_install_all:
@@ -1091,10 +1021,10 @@ headers_install_all:
PHONY += headers_install
headers_install: __headers
- $(if $(wildcard $(srctree)/$(hdr-dir)/Kbuild),, \
- $(error Headers not exportable for the $(SRCARCH) architecture))
- $(Q)$(MAKE) $(hdr-inst)=include
- $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst)
+ $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \
+ $(error Headers not exportable for the $(SRCARCH) architecture))
+ $(Q)$(MAKE) $(hdr-inst)=include/uapi
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst)
PHONY += headers_check_all
headers_check_all: headers_install_all
@@ -1102,8 +1032,8 @@ headers_check_all: headers_install_all
PHONY += headers_check
headers_check: headers_install
- $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1
- $(Q)$(MAKE) $(hdr-inst)=$(hdr-dir) $(hdr-dst) HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1
+ $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1
# ---------------------------------------------------------------------------
# Modules
@@ -1114,19 +1044,25 @@ ifdef CONFIG_MODULES
all: modules
-# Build modules
+# Build modules
#
-# A module can be listed more than once in obj-m resulting in
-# duplicate lines in modules.order files. Those are removed
-# using awk while concatenating to the final file.
+# A module can be listed more than once in obj-m resulting in
+# duplicate lines in modules.order files. Those are removed
+# using awk while concatenating to the final file.
PHONY += modules
-modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
+modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
@$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
+modules.builtin: $(vmlinux-dirs:%=%/modules.builtin)
+ $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin
+
+%/modules.builtin: include/config/auto.conf
+ $(Q)$(MAKE) $(modbuiltin)=$*
+
# Target to prepare building external modules
PHONY += modules_prepare
@@ -1138,20 +1074,16 @@ modules_install: _modinst_ _modinst_post
PHONY += _modinst_
_modinst_:
- @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
- echo "Warning: you may need to install module-init-tools"; \
- echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
- sleep 1; \
- fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
- @ln -s $(srctree) $(MODLIB)/source
+ @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source
@if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
rm -f $(MODLIB)/build ; \
- ln -s $(objtree) $(MODLIB)/build ; \
+ ln -s $(CURDIR) $(MODLIB)/build ; \
fi
@cp -f $(objtree)/modules.order $(MODLIB)/
+ @cp -f $(objtree)/modules.builtin $(MODLIB)/
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
# This depmod is only for convenience to give the initial
@@ -1162,17 +1094,23 @@ _modinst_post: _modinst_
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
$(call cmd,depmod)
+ifeq ($(CONFIG_MODULE_SIG), y)
+PHONY += modules_sign
+modules_sign:
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign
+endif
+
else # CONFIG_MODULES
# Modules not configured
# ---------------------------------------------------------------------------
modules modules_install: FORCE
- @echo
- @echo "The present kernel configuration has modules disabled."
- @echo "Type 'make config' and enable loadable module support."
- @echo "Then build a kernel with module support enabled."
- @echo
+ @echo >&2
+ @echo >&2 "The present kernel configuration has modules disabled."
+ @echo >&2 "Type 'make config' and enable loadable module support."
+ @echo >&2 "Then build a kernel with module support enabled."
+ @echo >&2
@exit 1
endif # CONFIG_MODULES
@@ -1186,36 +1124,30 @@ endif # CONFIG_MODULES
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
-CLEAN_FILES += vmlinux System.map \
- .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2 usr/include
-MRPROPER_FILES += .config .config.old include/asm .version .old_version \
- include/linux/autoconf.h include/linux/version.h \
- include/linux/utsrelease.h \
- include/linux/bounds.h include/asm*/asm-offsets.h \
- Module.symvers Module.markers tags TAGS cscope*
+MRPROPER_DIRS += include/config usr/include include/generated \
+ arch/*/include/generated .tmp_objdiff
+MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \
+ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
+ signing_key.priv signing_key.x509 x509.genkey \
+ extra_certificates signing_key.x509.keyid \
+ signing_key.x509.signer include/linux/version.h
# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
-clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs) Documentation)
+clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples)
-PHONY += $(clean-dirs) clean archclean
+PHONY += $(clean-dirs) clean archclean vmlinuxclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
-clean: archclean $(clean-dirs)
- $(call cmd,rmdirs)
- $(call cmd,rmfiles)
- @find . $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
- -o -name '*.symtypes' -o -name 'modules.order' \
- -o -name 'Module.markers' -o -name '.tmp_*.o.*' \) \
- -type f -print | xargs rm -f
+vmlinuxclean:
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean
+
+clean: archclean vmlinuxclean
# mrproper - Delete all generated files, including .config
#
@@ -1239,16 +1171,17 @@ distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' -o -size 0 \
- -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
+ -o -name '.*.rej' -o -name '*%' -o -name 'core' \) \
-type f -print | xargs rm -f
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
-package-dir := $(srctree)/scripts/package
+package-dir := scripts/package
+%src-pkg: FORCE
+ $(Q)$(MAKE) $(build)=$(package-dir) $@
%pkg: include/config/kernel.release FORCE
$(Q)$(MAKE) $(build)=$(package-dir) $@
rpm: include/config/kernel.release FORCE
@@ -1281,13 +1214,17 @@ help:
@echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
@echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
@echo ' dir/ - Build all files in dir and below'
- @echo ' dir/file.[ois] - Build specified target only'
+ @echo ' dir/file.[oisS] - Build specified target only'
+ @echo ' dir/file.lst - Build specified mixed source/assembly target only'
+ @echo ' (requires a recent binutils and recent build (System.map))'
@echo ' dir/file.ko - Build module including final link'
- @echo ' prepare - Set up for building external modules'
+ @echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
+ @echo ' gtags - Generate GNU GLOBAL index'
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
+ @echo ' image_name - Output the image name'
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \
echo ' (default: $(INSTALL_HDR_PATH))'; \
echo ''
@@ -1298,8 +1235,9 @@ help:
@echo ' includecheck - Check for duplicate included header files'
@echo ' export_report - List the usages of all exported symbols'
@echo ' headers_check - Sanity check on exported headers'
- @echo ' headerdep - Detect inclusion cycles in headers'; \
- echo ''
+ @echo ' headerdep - Detect inclusion cycles in headers'
+ @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help
+ @echo ''
@echo 'Kernel packaging:'
@$(MAKE) $(build)=$(package-dir) help
@echo ''
@@ -1325,6 +1263,12 @@ help:
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
@echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
@echo ' make C=2 [targets] Force check of all c source with $$CHECK'
+ @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+ @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
+ @echo ' 1: warnings which may be relevant and do not occur too often'
+ @echo ' 2: warnings which occur quite often but may still be relevant'
+ @echo ' 3: more obscure warnings, can most likely be ignored'
+ @echo ' Multiple levels can be combined with W=12 or W=123'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
@@ -1347,6 +1291,7 @@ $(help-board-dirs): help-%:
# Documentation targets
# ---------------------------------------------------------------------------
%docs: scripts_basic FORCE
+ $(Q)$(MAKE) $(build)=scripts build_docproc
$(Q)$(MAKE) $(build)=Documentation/DocBook $@
else # KBUILD_EXTMOD
@@ -1412,13 +1357,6 @@ $(clean-dirs):
clean: rm-dirs := $(MODVERDIR)
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
-clean: $(clean-dirs)
- $(call cmd,rmdirs)
- $(call cmd,rmfiles)
- @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
- \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
- -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
- -type f -print | xargs rm -f
help:
@echo ' Building external modules.'
@@ -1435,27 +1373,43 @@ prepare: ;
scripts: ;
endif # KBUILD_EXTMOD
+clean: $(clean-dirs)
+ $(call cmd,rmdirs)
+ $(call cmd,rmfiles)
+ @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
+ -o -name '*.ko.*' \
+ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
+ -o -name '*.symtypes' -o -name 'modules.order' \
+ -o -name modules.builtin -o -name '.tmp_*.o.*' \
+ -o -name '*.gcno' \) -type f -print | xargs rm -f
+
# Generate tags for editors
# ---------------------------------------------------------------------------
quiet_cmd_tags = GEN $@
cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
-tags TAGS cscope: FORCE
+tags TAGS cscope gtags: FORCE
$(call cmd,tags)
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
+PHONY += includecheck versioncheck coccicheck namespacecheck export_report
+
includecheck:
- find * $(RCS_FIND_IGNORE) \
+ find $(srctree)/* $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl
versioncheck:
- find * $(RCS_FIND_IGNORE) \
+ find $(srctree)/* $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w $(srctree)/scripts/checkversion.pl
+coccicheck:
+ $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@
+
namespacecheck:
$(PERL) $(srctree)/scripts/namespace.pl
@@ -1465,7 +1419,7 @@ export_report:
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
-PHONY += checkstack kernelrelease kernelversion
+PHONY += checkstack kernelrelease kernelversion image_name
# UML needs a little special treatment here. It wants to use the host
# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone
@@ -1481,11 +1435,23 @@ checkstack:
$(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH)
kernelrelease:
- $(if $(wildcard include/config/kernel.release), $(Q)echo $(KERNELRELEASE), \
- $(error kernelrelease not valid - run 'make prepare' to update it))
+ @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
kernelversion:
@echo $(KERNELVERSION)
+image_name:
+ @echo $(KBUILD_IMAGE)
+
+# Clear a bunch of variables before executing the submake
+tools/: FORCE
+ $(Q)mkdir -p $(objtree)/tools
+ $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/
+
+tools/%: FORCE
+ $(Q)mkdir -p $(objtree)/tools
+ $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ $*
+
# Single targets
# ---------------------------------------------------------------------------
# Single targets are compatible with:
@@ -1535,7 +1501,7 @@ endif
$(build)=$(build-dir) $(@:.ko=.o)
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-# FIXME Should go into a make.lib or something
+# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
@@ -1546,25 +1512,14 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))
# Run depmod only if we have System.map and depmod is executable
quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
- cmd_depmod = \
- if [ -r System.map -a -x $(DEPMOD) ]; then \
- $(DEPMOD) -ae -F System.map \
- $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \
- $(KERNELRELEASE); \
- fi
+ cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
+ $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))"
# Create temporary dir for module support files
# clean it up only when building all modules
cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
$(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
-a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
- $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
- $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
-
-quiet_cmd_as_o_S = AS $@
-cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
-
# read all saved command lines
targets := $(wildcard $(sort $(targets)))
@@ -1586,5 +1541,5 @@ PHONY += FORCE
FORCE:
# Declare the contents of the .PHONY variable as phony. We keep that
-# information in a variable se we can use it in if_changed and friends.
+# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-13 10:45:24 +0000