diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 1630 |
1 files changed, 913 insertions, 717 deletions
@@ -1,8 +1,8 @@ -VERSION = 2 -PATCHLEVEL = 6 -SUBLEVEL = 13 -EXTRAVERSION =-rc4 -NAME=Woozy Numbat +VERSION = 3 +PATCHLEVEL = 16 +SUBLEVEL = 0 +EXTRAVERSION = +NAME = Shuffling Zombie Juror # *DOCUMENTATION* # To see a list of typical targets execute "make help" @@ -10,8 +10,20 @@ NAME=Woozy Numbat # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not print "Entering directory ..." -MAKEFLAGS += --no-print-directory +# Do not: +# o use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +# o print "Entering directory ..."; +MAKEFLAGS += -rR --no-print-directory + +# Avoid funny character set dependencies +unexport LC_ALL +LC_COLLATE=C +LC_NUMERIC=C +export LC_COLLATE LC_NUMERIC + +# Avoid interference with shell env settings +unexport GREP_OPTIONS # We are using a recursive build, so we need to do a little thinking # to get the ordering right. @@ -29,25 +41,74 @@ MAKEFLAGS += --no-print-directory # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands -ifdef V - ifeq ("$(origin V)", "command line") - KBUILD_VERBOSE = $(V) - endif +ifeq ("$(origin V)", "command line") + KBUILD_VERBOSE = $(V) endif ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 endif -# Call sparse as part of compilation of C files -# Use 'make C=1' to enable sparse checking +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif -ifdef C - ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) - endif +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ +endif +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ +endif +endif + +export quiet Q KBUILD_VERBOSE + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) endif ifndef KBUILD_CHECKSRC KBUILD_CHECKSRC = 0 @@ -59,19 +120,17 @@ endif ifdef SUBDIRS KBUILD_EXTMOD ?= $(SUBDIRS) endif -ifdef M - ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) - endif -endif +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. # In both cases the working directory must be the root of the kernel src. # 1) O= # Use "make O=dir/to/store/output/files/" -# +# # 2) Set KBUILD_OUTPUT # Set the environment variable KBUILD_OUTPUT to point to the directory # where the output files shall be placed. @@ -88,31 +147,42 @@ ifeq ($(KBUILD_SRC),) # OK, Make called in directory where kernel src resides # Do we want to locate output files in a separate directory? -ifdef O - ifeq ("$(origin O)", "command line") - KBUILD_OUTPUT := $(O) - endif +ifeq ("$(origin O)", "command line") + KBUILD_OUTPUT := $(O) endif # That's our default target when none is given on the command line -.PHONY: _all +PHONY := _all _all: +# Cancel implicit rules on top Makefile +$(CURDIR)/Makefile Makefile: ; + ifneq ($(KBUILD_OUTPUT),) # Invoke a second make in the output directory, passing relevant variables # check that the output directory actually exists saved-output := $(KBUILD_OUTPUT) -KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd) +KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ + && /bin/pwd) $(if $(KBUILD_OUTPUT),, \ - $(error output directory "$(saved-output)" does not exist)) + $(error failed to create output directory "$(saved-output)")) + +PHONY += $(MAKECMDGOALS) sub-make -.PHONY: $(MAKECMDGOALS) +$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make + @: -$(filter-out _all,$(MAKECMDGOALS)) _all: - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \ - KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \ - -f $(CURDIR)/Makefile $@ +# Fake the "Entering directory" message once, so that IDEs/editors are +# able to understand relative filenames. + echodir := @echo + quiet_echodir := @echo +silent_echodir := @: +sub-make: FORCE + $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'" + $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ + KBUILD_SRC=$(CURDIR) \ + KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ + $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -124,52 +194,45 @@ ifeq ($(skip-makefile),) # If building an external module we do not care about the all: rule # but instead _all depend on modules -.PHONY: all +PHONY += all ifeq ($(KBUILD_EXTMOD),) _all: all else _all: modules endif -srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -TOPDIR := $(srctree) -# FIXME - TOPDIR is obsolete, use srctree/objtree -objtree := $(CURDIR) +ifeq ($(KBUILD_SRC),) + # building in the source tree + srctree := . +else + ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) + # building in a subdirectory of the source tree + srctree := .. + else + srctree := $(KBUILD_SRC) + endif +endif +objtree := . src := $(srctree) obj := $(objtree) -VPATH := $(srctree) - -export srctree objtree VPATH TOPDIR +VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) -nullstring := -space := $(nullstring) # end of line +export srctree objtree VPATH -# Take the contents of any files called localversion* and the config -# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be -# careful not to include files twice if building in the source -# directory. LOCALVERSION from the command line override all of this - -localver := $(objtree)/localversion* $(srctree)/localversion* -localver := $(sort $(wildcard $(localver))) -# skip backup files (containing '~') -localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f))) - -LOCALVERSION = $(subst $(space),, \ - $(shell cat /dev/null $(localver)) \ - $(patsubst "%",%,$(CONFIG_LOCALVERSION))) - -KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION) # SUBARCH tells the usermode build what the underlying arch is. That is set # first, and if a usermode build is happening, the "ARCH=um" on the command # line overrides the setting of ARCH below. If a native build is happening, -# then ARCH is assigned, getting whatever value it gets normally, and +# then ARCH is assigned, getting whatever value it gets normally, and # SUBARCH is subsequently ignored. -SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ +SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ + -e s/sun4u/sparc64/ \ -e s/arm.*/arm/ -e s/sa110/arm/ \ - -e s/s390x/s390/ -e s/parisc64/parisc/ ) + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) # Cross compiling and selecting different set of gcc/bin-utils # --------------------------------------------------------------------------- @@ -187,43 +250,85 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ # CROSS_COMPILE can be set on the command line # make CROSS_COMPILE=ia64-linux- # Alternatively CROSS_COMPILE can be set in the environment. +# A third alternative is to store a setting in .config so that plain +# "make" in the configured kernel build directory always uses that. # Default value for CROSS_COMPILE is not to prefix executables # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile - ARCH ?= $(SUBARCH) -CROSS_COMPILE ?= +CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%) # Architecture as present in compile.h -UTS_MACHINE := $(ARCH) +UTS_MACHINE := $(ARCH) +SRCARCH := $(ARCH) + +# Additional ARCH settings for x86 +ifeq ($(ARCH),i386) + SRCARCH := x86 +endif +ifeq ($(ARCH),x86_64) + SRCARCH := x86 +endif + +# Additional ARCH settings for sparc +ifeq ($(ARCH),sparc32) + SRCARCH := sparc +endif +ifeq ($(ARCH),sparc64) + SRCARCH := sparc +endif + +# Additional ARCH settings for sh +ifeq ($(ARCH),sh64) + SRCARCH := sh +endif + +# Additional ARCH settings for tile +ifeq ($(ARCH),tilepro) + SRCARCH := tile +endif +ifeq ($(ARCH),tilegx) + SRCARCH := tile +endif + +# Where to locate arch specific headers +hdr-arch := $(SRCARCH) + +KCONFIG_CONFIG ?= .config +export KCONFIG_CONFIG # SHELL used by kbuild CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ else if [ -x /bin/bash ]; then echo /bin/bash; \ else echo sh; fi ; fi) -HOSTCC = gcc -HOSTCXX = g++ -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -HOSTCXXFLAGS = -O2 +HOSTCC = gcc +HOSTCXX = g++ +HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer +HOSTCXXFLAGS = -O2 -# Decide whether to build built-in, modular, or both. -# Normally, just do built-in. +ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1) +HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \ + -Wno-missing-field-initializers -fno-delete-null-pointer-checks +endif + +# Decide whether to build built-in, modular, or both. +# Normally, just do built-in. KBUILD_MODULES := KBUILD_BUILTIN := 1 -# If we have only "make modules", don't compile built-in objects. -# When we're building modules with modversions, we need to consider -# the built-in objects during the descend as well, in order to -# make sure the checksums are uptodate before we record them. +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are up to date before we record them. ifeq ($(MAKECMDGOALS),modules) KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) endif -# If we have "make <whatever> modules", compile modules -# in addition to whatever we do anyway. -# Just "make" or "make all" shall build modules as well +# If we have "make <whatever> modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) KBUILD_MODULES := 1 @@ -233,89 +338,26 @@ ifeq ($(MAKECMDGOALS),) KBUILD_MODULES := 1 endif -export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE +export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing wil be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's usefull -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = +ifneq ($(CC),) +ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1) +COMPILER := clang else - quiet=quiet_ - Q = @ +COMPILER := gcc endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(findstring s,$(MAKEFLAGS)),) - quiet=silent_ +export COMPILER endif -export quiet Q KBUILD_VERBOSE - -###### -# cc support functions to be used (only) in arch/$(ARCH)/Makefile -# See documentation in Documentation/kbuild/makefiles.txt - -# cc-option -# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586) - -cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ - > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;) - -# For backward compatibility -check_gcc = $(warning check_gcc is deprecated - use cc-option) \ - $(call cc-option, $(1),$(2)) - -# cc-option-yn -# Usage: flag := $(call cc-option-yn, -march=winchip-c6) -cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \ - > /dev/null 2>&1; then echo "y"; else echo "n"; fi;) - -# cc-option-align -# Prefix align with either -falign or -malign -cc-option-align = $(subst -functions=0,,\ - $(call cc-option,-falign-functions=0,-malign-functions=0)) - -# cc-version -# Usage gcc-ver := $(call cc-version $(CC)) -cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ - $(if $(1), $(1), $(CC))) - - # Look for make include files relative to root of kernel src MAKEFLAGS += --include-dir=$(srctree) -# For maximum performance (+ possibly random breakage, uncomment -# the following) - -#MAKEFLAGS += -rR +# We need some generic definitions (do not try to remake the file). +$(srctree)/scripts/Kbuild.include: ; +include $(srctree)/scripts/Kbuild.include # Make variables (CC, etc...) - AS = $(CROSS_COMPILE)as LD = $(CROSS_COMPILE)ld CC = $(CROSS_COMPILE)gcc @@ -327,86 +369,127 @@ OBJCOPY = $(CROSS_COMPILE)objcopy OBJDUMP = $(CROSS_COMPILE)objdump AWK = awk GENKSYMS = scripts/genksyms/genksyms +INSTALLKERNEL := installkernel DEPMOD = /sbin/depmod -KALLSYMS = scripts/kallsyms PERL = perl CHECK = sparse -CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -MODFLAGS = -DMODULE -CFLAGS_MODULE = $(MODFLAGS) -AFLAGS_MODULE = $(MODFLAGS) -LDFLAGS_MODULE = -r +CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ + -Wbitwise -Wno-return-void $(CF) +CFLAGS_MODULE = +AFLAGS_MODULE = +LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = +CFLAGS_GCOV = -fprofile-arcs -ftest-coverage +# Use USERINCLUDE when you must reference the UAPI directories only. +USERINCLUDE := \ + -I$(srctree)/arch/$(hdr-arch)/include/uapi \ + -Iarch/$(hdr-arch)/include/generated/uapi \ + -I$(srctree)/include/uapi \ + -Iinclude/generated/uapi \ + -include $(srctree)/include/linux/kconfig.h + # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -Iinclude \ - $(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include) - -CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) - -CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \ - -fno-strict-aliasing -fno-common \ - -ffreestanding -AFLAGS := -D__ASSEMBLY__ - -export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \ - ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \ - CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \ - HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS - -export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS -export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE -export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE +LINUXINCLUDE := \ + -I$(srctree)/arch/$(hdr-arch)/include \ + -Iarch/$(hdr-arch)/include/generated \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + -Iinclude \ + $(USERINCLUDE) + +KBUILD_CPPFLAGS := -D__KERNEL__ + +KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ + -fno-strict-aliasing -fno-common \ + -Werror-implicit-function-declaration \ + -Wno-format-security + +KBUILD_AFLAGS_KERNEL := +KBUILD_CFLAGS_KERNEL := +KBUILD_AFLAGS := -D__ASSEMBLY__ +KBUILD_AFLAGS_MODULE := -DMODULE +KBUILD_CFLAGS_MODULE := -DMODULE +KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds + +# Read KERNELRELEASE from include/config/kernel.release (if it exists) +KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) +KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) + +export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION +export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC +export CPP AR NM STRIP OBJCOPY OBJDUMP +export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE +export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS + +export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS +export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV +export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE +export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE +export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL +export KBUILD_ARFLAGS # When compiling out-of-tree modules, put MODVERDIR in the module # tree rather than in the kernel tree. The kernel tree might # even be read-only. export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions -# The temporary file to save gcc -MD generated dependencies must not -# contain a comma -comma := , -depfile = $(subst $(comma),_,$(@D)/.$(@F).d) - # Files to ignore in find ... statements -RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc \) -prune -o -RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc +export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ + -name CVS -o -name .pc -o -name .hg -o -name .git \) \ + -prune -o +export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ + --exclude CVS --exclude .pc --exclude .hg --exclude .git # =========================================================================== # Rules shared between *config targets and build targets # Basic helpers built in scripts/ -.PHONY: scripts_basic +PHONY += scripts_basic scripts_basic: $(Q)$(MAKE) $(build)=scripts/basic + $(Q)rm -f .tmp_quiet_recordmcount + +# To avoid any implicit rule to kick in, define an empty command. +scripts/basic/%: scripts_basic ; -.PHONY: outputmakefile -# outputmakefile generate a Makefile to be placed in output directory, if -# using a seperate output directory. This allows convinient use -# of make in output directory +PHONY += outputmakefile +# outputmakefile generates a Makefile in the output directory, if using a +# separate output directory. This allows convenient use of make in the +# output directory. outputmakefile: - $(Q)if test ! $(srctree) -ef $(objtree); then \ - $(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ - $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \ - > $(objtree)/Makefile; \ - echo ' GEN $(objtree)/Makefile'; \ - fi +ifneq ($(KBUILD_SRC),) + $(Q)ln -fsn $(srctree) source + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ + $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) +endif + +# Support for using generic headers in asm-generic +PHONY += asm-generic +asm-generic: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=asm obj=arch/$(SRCARCH)/include/generated/asm + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ + src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm # To make sure we do not include .config for any of the *config targets # catch them early, and hand them over to scripts/kconfig/Makefile # It is allowed to specify more targets when calling make, including # mixing *config targets and build targets. -# For example 'make oldconfig all'. +# For example 'make oldconfig all'. # Detect when mixed targets is specified, and make a second invocation # of make so .config is not included in this case either (for *config). +version_h := include/generated/uapi/linux/version.h + no-dot-config-targets := clean mrproper distclean \ - cscope TAGS tags help %docs check% + cscope gtags TAGS tags help %docs check% coccicheck \ + $(version_h) headers_% archheaders archscripts \ + kernelversion %src-pkg config-targets := 0 mixed-targets := 0 @@ -432,8 +515,16 @@ ifeq ($(mixed-targets),1) # We're called with mixed targets (*config and build targets). # Handle them one by one. -%:: FORCE - $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@ +PHONY += $(MAKECMDGOALS) __build_one_by_one + +$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one + @: + +__build_one_by_one: + $(Q)set -e; \ + for i in $(MAKECMDGOALS); do \ + $(MAKE) -f $(srctree)/Makefile $$i; \ + done else ifeq ($(config-targets),1) @@ -444,11 +535,12 @@ ifeq ($(config-targets),1) # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. # KBUILD_DEFCONFIG may point out an alternative default configuration # used for 'make defconfig' -include $(srctree)/arch/$(ARCH)/Makefile -export KBUILD_DEFCONFIG +include $(srctree)/arch/$(SRCARCH)/Makefile +export KBUILD_DEFCONFIG KBUILD_KCONFIG config: scripts_basic outputmakefile FORCE $(Q)$(MAKE) $(build)=scripts/kconfig $@ + %config: scripts_basic outputmakefile FORCE $(Q)$(MAKE) $(build)=scripts/kconfig $@ @@ -460,87 +552,225 @@ else ifeq ($(KBUILD_EXTMOD),) # Additional helpers built in scripts/ # Carefully list dependencies so we do not try to build scripts twice -# in parrallel -.PHONY: scripts -scripts: scripts_basic include/config/MARKER +# in parallel +PHONY += scripts +scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \ + asm-generic $(Q)$(MAKE) $(build)=$(@) -scripts_basic: include/linux/autoconf.h - # Objects we will link into vmlinux / subdirs we need to visit init-y := init/ -drivers-y := drivers/ sound/ +drivers-y := drivers/ sound/ firmware/ net-y := net/ libs-y := lib/ core-y := usr/ endif # KBUILD_EXTMOD ifeq ($(dot-config),1) -# In this section, we need .config +# Read in config +-include include/config/auto.conf +ifeq ($(KBUILD_EXTMOD),) # Read in dependencies to all Kconfig* files, make sure to run # oldconfig if changes are detected. --include .config.cmd - -include .config +-include include/config/auto.conf.cmd -# If .config needs to be updated, it will be done via the dependency -# that autoconf has on .config. # To avoid any implicit rule to kick in, define an empty command -.config: ; +$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; -# If .config is newer than include/linux/autoconf.h, someone tinkered -# with it and forgot to run make oldconfig -include/linux/autoconf.h: .config +# If .config is newer than include/config/auto.conf, someone tinkered +# with it and forgot to run make oldconfig. +# if auto.conf.cmd is missing then we are probably in a cleaned tree so +# we execute the config step to be sure to catch updated Kconfig files +include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig else +# external modules needs include/generated/autoconf.h and include/config/auto.conf +# but do not care if they are up-to-date. Use auto.conf to trigger the test +PHONY += include/config/auto.conf + +include/config/auto.conf: + $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ + echo >&2; \ + echo >&2 " ERROR: Kernel configuration is invalid."; \ + echo >&2 " include/generated/autoconf.h or $@ are missing.";\ + echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ + echo >&2 ; \ + /bin/false) + +endif # KBUILD_EXTMOD + +else # Dummy target needed, because used as prerequisite -include/linux/autoconf.h: ; -endif +include/config/auto.conf: ; +endif # $(dot-config) # The all: target is the default when no target is given on the # command line. # This allow a user to issue only 'make' to build a kernel including modules -# Defaults vmlinux but it is usually overriden in the arch makefile +# Defaults to vmlinux, but the arch makefile usually adds further targets all: vmlinux +include $(srctree)/arch/$(SRCARCH)/Makefile + +KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) + ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -CFLAGS += -Os +KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,) else -CFLAGS += -O2 +KBUILD_CFLAGS += -O2 endif -#Add align options if CONFIG_CC_* is not equal to 0 -add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1))) -CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions) -CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels) -CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops) -CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps) +ifdef CONFIG_READABLE_ASM +# Disable optimizations that make assembler listings hard to read. +# reorder blocks reorders the control in the function +# ipa clone creates specialized cloned functions +# partial inlining inlines only parts of functions +KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ + $(call cc-option,-fno-ipa-cp-clone,) \ + $(call cc-option,-fno-partial-inlining) +endif + +ifneq ($(CONFIG_FRAME_WARN),0) +KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) +endif + +# Handle stack protector mode. +ifdef CONFIG_CC_STACKPROTECTOR_REGULAR + stackp-flag := -fstack-protector + ifeq ($(call cc-option, $(stackp-flag)),) + $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \ + -fstack-protector not supported by compiler) + endif +else +ifdef CONFIG_CC_STACKPROTECTOR_STRONG + stackp-flag := -fstack-protector-strong + ifeq ($(call cc-option, $(stackp-flag)),) + $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \ + -fstack-protector-strong not supported by compiler) + endif +else + # Force off for distro compilers that enable stack protector by default. + stackp-flag := $(call cc-option, -fno-stack-protector) +endif +endif +KBUILD_CFLAGS += $(stackp-flag) + +ifeq ($(COMPILER),clang) +KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) +KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable) +KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) +KBUILD_CFLAGS += $(call cc-disable-warning, gnu) +# Quiet clang warning: comparison of unsigned expression < 0 is always false +KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) +# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the +# source of a reference will be _MergedGlobals and not on of the whitelisted names. +# See modpost pattern 2 +KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) +else + +# This warning generated too much noise in a regular build. +# Use make W=1 to enable this warning (see scripts/Makefile.build) +KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) +endif ifdef CONFIG_FRAME_POINTER -CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,) +KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls else -CFLAGS += -fomit-frame-pointer +# Some targets (ARM with Thumb2, for example), can't be built with frame +# pointers. For those, we don't have FUNCTION_TRACER automatically +# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is +# incompatible with -fomit-frame-pointer with current GCC, so we don't use +# -fomit-frame-pointer with FUNCTION_TRACER. +ifndef CONFIG_FUNCTION_TRACER +KBUILD_CFLAGS += -fomit-frame-pointer endif +endif + +KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments) ifdef CONFIG_DEBUG_INFO -CFLAGS += -g +KBUILD_CFLAGS += -g +KBUILD_AFLAGS += -Wa,-gdwarf-2 endif -include $(srctree)/arch/$(ARCH)/Makefile +ifdef CONFIG_DEBUG_INFO_REDUCED +KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \ + $(call cc-option,-fno-var-tracking) +endif + +ifdef CONFIG_FUNCTION_TRACER +ifdef CONFIG_HAVE_FENTRY +CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY) +endif +KBUILD_CFLAGS += -pg $(CC_USING_FENTRY) +KBUILD_AFLAGS += $(CC_USING_FENTRY) +ifdef CONFIG_DYNAMIC_FTRACE + ifdef CONFIG_HAVE_C_RECORDMCOUNT + BUILD_C_RECORDMCOUNT := y + export BUILD_C_RECORDMCOUNT + endif +endif +endif + +# We trigger additional mismatches with less inlining +ifdef CONFIG_DEBUG_SECTION_MISMATCH +KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) +endif # arch Makefile may override CC so keep this after arch Makefile is included NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) CHECKFLAGS += $(NOSTDINC_FLAGS) # warn about C99 declaration after statement -CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) +KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) + +# disable pointer signed / unsigned warnings in gcc 4.0 +KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) + +# disable invalid "can't wrap" optimizations for signed / pointers +KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) + +# conserve stack if available +KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) -# disable pointer signedness warnings in gcc 4.0 -CFLAGS += $(call cc-option,-Wno-pointer-sign,) +# disallow errors like 'EXPORT_GPL(foo);' with missing header +KBUILD_CFLAGS += $(call cc-option,-Werror=implicit-int) + +# require functions to have arguments in prototypes, not empty 'int foo()' +KBUILD_CFLAGS += $(call cc-option,-Werror=strict-prototypes) + +# Prohibit date/time macros, which would make the build non-deterministic +KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) + +# use the deterministic mode of AR if available +KBUILD_ARFLAGS := $(call ar-option,D) + +# check for 'asm goto' +ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) + KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO +endif + +include $(srctree)/scripts/Makefile.extrawarn + +# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments +KBUILD_CPPFLAGS += $(KCPPFLAGS) +KBUILD_AFLAGS += $(KAFLAGS) +KBUILD_CFLAGS += $(KCFLAGS) + +# Use --build-id when available. +LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ + $(call cc-ldoption, -Wl$(comma)--build-id,)) +KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID) +LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID) + +ifeq ($(CONFIG_STRIP_ASM_SYMS),y) +LDFLAGS_vmlinux += $(call ld-option, -X,) +endif # Default kernel image to build when no specific target is given. -# KBUILD_IMAGE may be overruled on the commandline or +# KBUILD_IMAGE may be overruled on the command line or # set in the environment # Also any assignments in arch/$(ARCH)/Makefile take precedence over # this default value @@ -552,17 +782,64 @@ export KBUILD_IMAGE ?= vmlinux export INSTALL_PATH ?= /boot # +# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. +# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as +# an argument if needed. Otherwise it defaults to the kernel install path +# +export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) + +# # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory # relocations required by build roots. This is not defined in the -# makefile but the arguement can be passed to make if needed. +# makefile but the argument can be passed to make if needed. # -MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) +MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) export MODLIB +# +# INSTALL_MOD_STRIP, if defined, will cause modules to be +# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then +# the default option --strip-debug will be used. Otherwise, +# INSTALL_MOD_STRIP value will be used as the options to the strip command. + +ifdef INSTALL_MOD_STRIP +ifeq ($(INSTALL_MOD_STRIP),1) +mod_strip_cmd = $(STRIP) --strip-debug +else +mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) +endif # INSTALL_MOD_STRIP=1 +else +mod_strip_cmd = true +endif # INSTALL_MOD_STRIP +export mod_strip_cmd + +# Select initial ramdisk compression format, default is gzip(1). +# This shall be used by the dracut(8) tool while creating an initramfs image. +# +INITRD_COMPRESS-y := gzip +INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2 +INITRD_COMPRESS-$(CONFIG_RD_LZMA) := lzma +INITRD_COMPRESS-$(CONFIG_RD_XZ) := xz +INITRD_COMPRESS-$(CONFIG_RD_LZO) := lzo +INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4 +# do not export INITRD_COMPRESS, since we didn't actually +# choose a sane default compression above. +# export INITRD_COMPRESS := $(INITRD_COMPRESS-y) + +ifdef CONFIG_MODULE_SIG_ALL +MODSECKEY = ./signing_key.priv +MODPUBKEY = ./signing_key.x509 +export MODPUBKEY +mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY) +else +mod_sign_cmd = true +endif +export mod_sign_cmd + ifeq ($(KBUILD_EXTMOD),) -core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ +core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ @@ -581,156 +858,37 @@ libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) libs-y := $(libs-y1) $(libs-y2) -# Build vmlinux -# --------------------------------------------------------------------------- -# vmlinux is build from the objects selected by $(vmlinux-init) and -# $(vmlinux-main). Most are built-in.o files from top-level directories -# in the kernel tree, others are specified in arch/$(ARCH)Makefile. -# Ordering when linking is important, and $(vmlinux-init) must be first. -# -# vmlinux -# ^ -# | -# +-< $(vmlinux-init) -# | +--< init/version.o + more -# | -# +--< $(vmlinux-main) -# | +--< driver/built-in.o mm/built-in.o + more -# | -# +-< kallsyms.o (see description in CONFIG_KALLSYMS section) -# -# vmlinux version (uname -v) cannot be updated during normal -# descending-into-subdirs phase since we do not yet know if we need to -# update vmlinux. -# Therefore this step is delayed until just before final link of vmlinux - -# except in the kallsyms case where it is done just before adding the -# symbols to the kernel. -# -# System.map is generated to document addresses of all kernel symbols - -vmlinux-init := $(head-y) $(init-y) -vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y) -vmlinux-all := $(vmlinux-init) $(vmlinux-main) -vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds - -# Rule to link vmlinux - also used during CONFIG_KALLSYMS -# May be overridden by arch/$(ARCH)/Makefile -quiet_cmd_vmlinux__ ?= LD $@ - cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \ - -T $(vmlinux-lds) $(vmlinux-init) \ - --start-group $(vmlinux-main) --end-group \ - $(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^) - -# Generate new vmlinux version -quiet_cmd_vmlinux_version = GEN .version - cmd_vmlinux_version = set -e; \ - . $(srctree)/scripts/mkversion > .tmp_version; \ - mv -f .tmp_version .version; \ - $(MAKE) $(build)=init - -# Generate System.map -quiet_cmd_sysmap = SYSMAP - cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap - -# Link of vmlinux -# If CONFIG_KALLSYMS is set .version is already updated -# Generate System.map and verify that the content is consistent - -define rule_vmlinux__ - $(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version)) - - $(call cmd,vmlinux__) - $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd - - $(Q)$(if $($(quiet)cmd_sysmap), \ - echo ' $($(quiet)cmd_sysmap) System.map' &&) \ - $(cmd_sysmap) $@ System.map; \ - if [ $$? -ne 0 ]; then \ - rm -f $@; \ - /bin/false; \ - fi; - $(verify_kallsyms) -endef - - -ifdef CONFIG_KALLSYMS -# Generate section listing all symbols and add it into vmlinux $(kallsyms.o) -# It's a three stage process: -# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is -# empty -# Running kallsyms on that gives us .tmp_kallsyms1.o with -# the right size - vmlinux version (uname -v) is updated during this step -# o .tmp_vmlinux2 now has a __kallsyms section of the right size, -# but due to the added section, some addresses have shifted. -# From here, we generate a correct .tmp_kallsyms2.o -# o The correct .tmp_kallsyms2.o is linked into the final vmlinux. -# o Verify that the System.map from vmlinux matches the map from -# .tmp_vmlinux2, just in case we did not generate kallsyms correctly. -# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using -# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a -# temporary bypass to allow the kernel to be built while the -# maintainers work out what went wrong with kallsyms. - -ifdef CONFIG_KALLSYMS_EXTRA_PASS -last_kallsyms := 3 -else -last_kallsyms := 2 +# Externally visible symbols (used by link-vmlinux.sh) +export KBUILD_VMLINUX_INIT := $(head-y) $(init-y) +export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) +export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds +export LDFLAGS_vmlinux +# used by scripts/pacmage/Makefile +export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools virt) + +vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN) + +# Final link of vmlinux + cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) +quiet_cmd_link-vmlinux = LINK $@ + +# Include targets which we want to +# execute if the rest of the kernel build went well. +vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE +ifdef CONFIG_HEADERS_CHECK + $(Q)$(MAKE) -f $(srctree)/Makefile headers_check endif +ifdef CONFIG_SAMPLES + $(Q)$(MAKE) $(build)=samples +endif +ifdef CONFIG_BUILD_DOCSRC + $(Q)$(MAKE) $(build)=Documentation +endif + +$(call if_changed,link-vmlinux) -kallsyms.o := .tmp_kallsyms$(last_kallsyms).o - -define verify_kallsyms - $(Q)$(if $($(quiet)cmd_sysmap), \ - echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \ - $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map - $(Q)cmp -s System.map .tmp_System.map || \ - (echo Inconsistent kallsyms data; \ - echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \ - rm .tmp_kallsyms* ; /bin/false ) -endef - -# Update vmlinux version before link -# Use + in front of this rule to silent warning about make -j1 -cmd_ksym_ld = $(cmd_vmlinux__) -define rule_ksym_ld - +$(call cmd,vmlinux_version) - $(call cmd,vmlinux__) - $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd -endef - -# Generate .S file with all kernel symbols -quiet_cmd_kallsyms = KSYM $@ - cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ - $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ - -.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE - $(call if_changed_dep,as_o_S) - -.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) - $(call cmd,kallsyms) - -# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version -.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE - $(call if_changed_rule,ksym_ld) - -.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE - $(call if_changed,vmlinux__) - -.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE - $(call if_changed,vmlinux__) - -# Needs to visit scripts/ before $(KALLSYMS) can be used. -$(KALLSYMS): scripts ; - -endif # ifdef CONFIG_KALLSYMS - -# vmlinux image - including updated kernel symbols -vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE - $(call if_changed_rule,vmlinux__) - -# The actual objects are generated when descending, +# The actual objects are generated when descending, # make sure no implicit rule kicks in -$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; +$(sort $(vmlinux-deps)): $(vmlinux-dirs) ; # Handle descending into subdirectories listed in $(vmlinux-dirs) # Preset locale variables to speed up the build process. Limit locale @@ -738,87 +896,55 @@ $(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ; # make menuconfig etc. # Error messages still appears in the original language -.PHONY: $(vmlinux-dirs) -$(vmlinux-dirs): prepare-all scripts +PHONY += $(vmlinux-dirs) +$(vmlinux-dirs): prepare scripts $(Q)$(MAKE) $(build)=$@ +define filechk_kernel.release + echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" +endef + +# Store (new) KERNELRELEASE string in include/config/kernel.release +include/config/kernel.release: include/config/auto.conf FORCE + $(call filechk,kernel.release) + + # Things we need to do before we recursively start building the kernel -# or the modules are listed in "prepare-all". -# A multi level approach is used. prepare1 is updated first, then prepare0. -# prepare-all is the collection point for the prepare targets. +# or the modules are listed in "prepare". +# A multi level approach is used. prepareN is processed before prepareN-1. +# archprepare is used in arch Makefiles and when processed asm symlink, +# version.h and scripts_basic is processed / created. -.PHONY: prepare-all prepare prepare0 prepare1 prepare2 +# Listed in dependency order +PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 -# prepare2 is used to check if we are building in a separate output directory, +# prepare3 is used to check if we are building in a separate output directory, # and if so do: # 1) Check that make has not been executed in the kernel src $(srctree) -# 2) Create the include2 directory, used for the second asm symlink - -prepare2: +prepare3: include/config/kernel.release ifneq ($(KBUILD_SRC),) - @echo ' Using $(srctree) as source for kernel' - $(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \ - echo " $(srctree) is not clean, please run 'make mrproper'";\ - echo " in the '$(srctree)' directory.";\ + @$(kecho) ' Using $(srctree) as source for kernel' + $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ + echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ + echo >&2 " in the '$(srctree)' directory.";\ /bin/false; \ fi; - $(Q)if [ ! -d include2 ]; then mkdir -p include2; fi; - $(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm endif -# prepare1 creates a makefile if using a separate output directory -prepare1: prepare2 outputmakefile +# prepare2 creates a makefile if using a separate output directory +prepare2: prepare3 outputmakefile asm-generic -prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER -ifneq ($(KBUILD_MODULES),) - $(Q)rm -rf $(MODVERDIR) - $(Q)mkdir -p $(MODVERDIR) -endif - -# All the preparing.. -prepare-all: prepare0 prepare +prepare1: prepare2 $(version_h) include/generated/utsrelease.h \ + include/config/auto.conf + $(cmd_crmodverdir) -# Leave this as default for preprocessing vmlinux.lds.S, which is now -# done in arch/$(ARCH)/kernel/Makefile +archprepare: archheaders archscripts prepare1 scripts_basic -export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH) +prepare0: archprepare FORCE + $(Q)$(MAKE) $(build)=. -# Single targets -# --------------------------------------------------------------------------- - -%.s: %.c scripts FORCE - $(Q)$(MAKE) $(build)=$(@D) $@ -%.i: %.c scripts FORCE - $(Q)$(MAKE) $(build)=$(@D) $@ -%.o: %.c scripts FORCE - $(Q)$(MAKE) $(build)=$(@D) $@ -%.ko: scripts FORCE - $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o) - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost -%/: scripts prepare FORCE - $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) -%.lst: %.c scripts FORCE - $(Q)$(MAKE) $(build)=$(@D) $@ -%.s: %.S scripts FORCE - $(Q)$(MAKE) $(build)=$(@D) $@ -%.o: %.S scripts FORCE - $(Q)$(MAKE) $(build)=$(@D) $@ - -# FIXME: The asm symlink changes when $(ARCH) changes. That's -# hard to detect, but I suppose "make mrproper" is a good idea -# before switching between archs anyway. - -include/asm: - @echo ' SYMLINK $@ -> include/asm-$(ARCH)' - $(Q)if [ ! -d include ]; then mkdir -p include; fi; - @ln -fsn asm-$(ARCH) $@ - -# Split autoconf.h into include/linux/config/* - -include/config/MARKER: include/linux/autoconf.h - @echo ' SPLIT include/linux/autoconf.h -> include/config/*' - @scripts/basic/split-include include/linux/autoconf.h include/config - @touch $@ +# All the preparing.. +prepare: prepare0 # Generate some files # --------------------------------------------------------------------------- @@ -827,82 +953,152 @@ include/config/MARKER: include/linux/autoconf.h # needs to be updated, so this check is forced on all builds uts_len := 64 +define filechk_utsrelease.h + if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ + echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ + exit 1; \ + fi; \ + (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";) +endef define filechk_version.h - if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ - echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ - exit 1; \ - fi; \ - (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \ - echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \ - echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \ - ) + (echo \#define LINUX_VERSION_CODE $(shell \ + expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ + echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) endef -include/linux/version.h: $(srctree)/Makefile FORCE +$(version_h): $(srctree)/Makefile FORCE $(call filechk,version.h) +include/generated/utsrelease.h: include/config/kernel.release FORCE + $(call filechk,utsrelease.h) + +PHONY += headerdep +headerdep: + $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ + $(srctree)/scripts/headerdep.pl -I$(srctree)/include + # --------------------------------------------------------------------------- -.PHONY: depend dep +PHONY += depend dep depend dep: @echo '*** Warning: make $@ is unnecessary now.' # --------------------------------------------------------------------------- +# Firmware install +INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware +export INSTALL_FW_PATH + +PHONY += firmware_install +firmware_install: FORCE + @mkdir -p $(objtree)/firmware + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install + +# --------------------------------------------------------------------------- +# Kernel headers + +#Default location for installed headers +export INSTALL_HDR_PATH = $(objtree)/usr + +hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj + +# If we do an all arch process set dst to asm-$(hdr-arch) +hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) + +PHONY += archheaders +archheaders: + +PHONY += archscripts +archscripts: + +PHONY += __headers +__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE + $(Q)$(MAKE) $(build)=scripts build_unifdef + +PHONY += headers_install_all +headers_install_all: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install + +PHONY += headers_install +headers_install: __headers + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \ + $(error Headers not exportable for the $(SRCARCH) architecture)) + $(Q)$(MAKE) $(hdr-inst)=include/uapi + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) + +PHONY += headers_check_all +headers_check_all: headers_install_all + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check + +PHONY += headers_check +headers_check: headers_install + $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1 + +# --------------------------------------------------------------------------- # Modules ifdef CONFIG_MODULES -# By default, build modules as well +# By default, build modules as well all: modules -# Build modules +# Build modules +# +# A module can be listed more than once in obj-m resulting in +# duplicate lines in modules.order files. Those are removed +# using awk while concatenating to the final file. + +PHONY += modules +modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin + $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order + @$(kecho) ' Building modules, stage 2.'; + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild + +modules.builtin: $(vmlinux-dirs:%=%/modules.builtin) + $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin -.PHONY: modules -modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) - @echo ' Building modules, stage 2.'; - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost +%/modules.builtin: include/config/auto.conf + $(Q)$(MAKE) $(modbuiltin)=$* # Target to prepare building external modules -.PHONY: modules_prepare -modules_prepare: prepare-all scripts +PHONY += modules_prepare +modules_prepare: prepare scripts # Target to install modules -.PHONY: modules_install +PHONY += modules_install modules_install: _modinst_ _modinst_post -.PHONY: _modinst_ +PHONY += _modinst_ _modinst_: - @if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \ - echo "Warning: you may need to install module-init-tools"; \ - echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ - sleep 1; \ - fi @rm -rf $(MODLIB)/kernel @rm -f $(MODLIB)/source @mkdir -p $(MODLIB)/kernel - @ln -s $(srctree) $(MODLIB)/source + @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ rm -f $(MODLIB)/build ; \ - ln -s $(objtree) $(MODLIB)/build ; \ + ln -s $(CURDIR) $(MODLIB)/build ; \ fi - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst + @cp -f $(objtree)/modules.order $(MODLIB)/ + @cp -f $(objtree)/modules.builtin $(MODLIB)/ + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst -# If System.map exists, run depmod. This deliberately does not have a -# dependency on System.map since that would run the dependency tree on -# vmlinux. This depmod is only for convenience to give the initial +# This depmod is only for convenience to give the initial # boot a modules.dep even before / is mounted read-write. However the # boot script depmod is the master version. -ifeq "$(strip $(INSTALL_MOD_PATH))" "" -depmod_opts := -else -depmod_opts := -b $(INSTALL_MOD_PATH) -r -endif -.PHONY: _modinst_post +PHONY += _modinst_post _modinst_post: _modinst_ - if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst + $(call cmd,depmod) + +ifeq ($(CONFIG_MODULE_SIG), y) +PHONY += modules_sign +modules_sign: + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign +endif else # CONFIG_MODULES @@ -910,35 +1106,15 @@ else # CONFIG_MODULES # --------------------------------------------------------------------------- modules modules_install: FORCE - @echo - @echo "The present kernel configuration has modules disabled." - @echo "Type 'make config' and enable loadable module support." - @echo "Then build a kernel with module support enabled." - @echo + @echo >&2 + @echo >&2 "The present kernel configuration has modules disabled." + @echo >&2 "Type 'make config' and enable loadable module support." + @echo >&2 "Then build a kernel with module support enabled." + @echo >&2 @exit 1 endif # CONFIG_MODULES -# Generate asm-offsets.h -# --------------------------------------------------------------------------- - -define filechk_gen-asm-offsets - (set -e; \ - echo "#ifndef __ASM_OFFSETS_H__"; \ - echo "#define __ASM_OFFSETS_H__"; \ - echo "/*"; \ - echo " * DO NOT MODIFY."; \ - echo " *"; \ - echo " * This file was generated by arch/$(ARCH)/Makefile"; \ - echo " *"; \ - echo " */"; \ - echo ""; \ - sed -ne "/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"; \ - echo ""; \ - echo "#endif" ) -endef - - ### # Cleaning is done on three levels. # make clean Delete most generated files @@ -948,32 +1124,30 @@ endef # Directories & files removed with 'make clean' CLEAN_DIRS += $(MODVERDIR) -CLEAN_FILES += vmlinux System.map \ - .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config include2 -MRPROPER_FILES += .config .config.old include/asm .version \ - include/linux/autoconf.h include/linux/version.h \ - Module.symvers tags TAGS cscope* +MRPROPER_DIRS += include/config usr/include include/generated \ + arch/*/include/generated .tmp_objdiff +MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \ + Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ + signing_key.priv signing_key.x509 x509.genkey \ + extra_certificates signing_key.x509.keyid \ + signing_key.x509.signer include/linux/version.h # clean - Delete most, but leave enough to build external modules # clean: rm-dirs := $(CLEAN_DIRS) clean: rm-files := $(CLEAN_FILES) -clean-dirs := $(addprefix _clean_,$(vmlinux-alldirs)) +clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples) -.PHONY: $(clean-dirs) clean archclean +PHONY += $(clean-dirs) clean archclean vmlinuxclean $(clean-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) -clean: archclean $(clean-dirs) - $(call cmd,rmdirs) - $(call cmd,rmfiles) - @find . $(RCS_FIND_IGNORE) \ - \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ - -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ - -type f -print | xargs rm -f +vmlinuxclean: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean + +clean: archclean vmlinuxclean # mrproper - Delete all generated files, including .config # @@ -981,7 +1155,7 @@ mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts) -.PHONY: $(mrproper-dirs) mrproper archmrproper +PHONY += $(mrproper-dirs) mrproper archmrproper $(mrproper-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) @@ -991,40 +1165,43 @@ mrproper: clean archmrproper $(mrproper-dirs) # distclean # -.PHONY: distclean +PHONY += distclean distclean: mrproper @find $(srctree) $(RCS_FIND_IGNORE) \ - \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ + \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ - -o -name '.*.rej' -o -size 0 \ - -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \ + -o -name '.*.rej' -o -name '*%' -o -name 'core' \) \ -type f -print | xargs rm -f # Packaging of the kernel to various formats # --------------------------------------------------------------------------- # rpm target kept for backward compatibility -package-dir := $(srctree)/scripts/package +package-dir := scripts/package -.PHONY: %-pkg rpm - -%pkg: FORCE - $(Q)$(MAKE) -f $(package-dir)/Makefile $@ -rpm: FORCE - $(Q)$(MAKE) -f $(package-dir)/Makefile $@ +%src-pkg: FORCE + $(Q)$(MAKE) $(build)=$(package-dir) $@ +%pkg: include/config/kernel.release FORCE + $(Q)$(MAKE) $(build)=$(package-dir) $@ +rpm: include/config/kernel.release FORCE + $(Q)$(MAKE) $(build)=$(package-dir) $@ # Brief documentation of the typical targets used # --------------------------------------------------------------------------- -boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig) +boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) boards := $(notdir $(boards)) +board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) +board-dirs := $(sort $(notdir $(board-dirs:/=))) help: @echo 'Cleaning targets:' - @echo ' clean - remove most generated files but keep the config' - @echo ' mrproper - remove all generated files + config + various backup files' + @echo ' clean - Remove most generated files but keep the config and' + @echo ' enough build support to build external modules' + @echo ' mrproper - Remove all generated files + config + various backup files' + @echo ' distclean - mrproper + remove editor backup and patch files' @echo '' @echo 'Configuration targets:' @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help @@ -1033,47 +1210,88 @@ help: @echo ' all - Build all targets marked with [*]' @echo '* vmlinux - Build the bare kernel' @echo '* modules - Build all modules' - @echo ' modules_install - Install all modules' + @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' + @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH' + @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)' @echo ' dir/ - Build all files in dir and below' - @echo ' dir/file.[ois] - Build specified target only' + @echo ' dir/file.[oisS] - Build specified target only' + @echo ' dir/file.lst - Build specified mixed source/assembly target only' + @echo ' (requires a recent binutils and recent build (System.map))' @echo ' dir/file.ko - Build module including final link' - @echo ' rpm - Build a kernel as an RPM package' + @echo ' modules_prepare - Set up for building external modules' @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' - @echo '' + @echo ' gtags - Generate GNU GLOBAL index' + @echo ' kernelrelease - Output the release version string' + @echo ' kernelversion - Output the version stored in Makefile' + @echo ' image_name - Output the image name' + @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ + echo ' (default: $(INSTALL_HDR_PATH))'; \ + echo '' @echo 'Static analysers' - @echo ' buildcheck - List dangling references to vmlinux discarded sections' - @echo ' and init sections from non-init sections' @echo ' checkstack - Generate a list of stack hogs' @echo ' namespacecheck - Name space analysis on compiled kernel' + @echo ' versioncheck - Sanity check on version.h usage' + @echo ' includecheck - Check for duplicate included header files' + @echo ' export_report - List the usages of all exported symbols' + @echo ' headers_check - Sanity check on exported headers' + @echo ' headerdep - Detect inclusion cycles in headers' + @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help @echo '' @echo 'Kernel packaging:' - @$(MAKE) -f $(package-dir)/Makefile help + @$(MAKE) $(build)=$(package-dir) help @echo '' @echo 'Documentation targets:' @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp @echo '' - @echo 'Architecture specific targets ($(ARCH)):' + @echo 'Architecture specific targets ($(SRCARCH)):' @$(if $(archhelp),$(archhelp),\ - echo ' No architecture specific help defined for $(ARCH)') + echo ' No architecture specific help defined for $(SRCARCH)') @echo '' @$(if $(boards), \ $(foreach b, $(boards), \ printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ echo '') + @$(if $(board-dirs), \ + $(foreach b, $(board-dirs), \ + printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ + printf " %-16s - Show all of the above\\n" help-boards; \ + echo '') @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' + @echo ' make V=2 [targets] 2 => give reason for rebuild of target' @echo ' make O=dir [targets] Locate all output files in "dir", including .config' - @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)' - @echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)' + @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' + @echo ' make C=2 [targets] Force check of all c source with $$CHECK' + @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' + @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' + @echo ' 1: warnings which may be relevant and do not occur too often' + @echo ' 2: warnings which occur quite often but may still be relevant' + @echo ' 3: more obscure warnings, can most likely be ignored' + @echo ' Multiple levels can be combined with W=12 or W=123' @echo '' @echo 'Execute "make" or "make all" to build all targets marked with [*] ' @echo 'For further info see the ./README file' +help-board-dirs := $(addprefix help-,$(board-dirs)) + +help-boards: $(help-board-dirs) + +boards-per-dir = $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig)) + +$(help-board-dirs): help-%: + @echo 'Architecture specific targets ($(SRCARCH) $*):' + @$(if $(boards-per-dir), \ + $(foreach b, $(boards-per-dir), \ + printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ + echo '') + + # Documentation targets # --------------------------------------------------------------------------- %docs: scripts_basic FORCE + $(Q)$(MAKE) $(build)=scripts build_docproc $(Q)$(MAKE) $(build)=Documentation/DocBook $@ else # KBUILD_EXTMOD @@ -1092,16 +1310,16 @@ else # KBUILD_EXTMOD # make M=dir modules Make all modules in specified dir # make M=dir Same as 'make M=dir modules' # make M=dir modules_install -# Install the modules build in the module directory +# Install the modules built in the module directory # Assumes install directory is already created # We are always building modules KBUILD_MODULES := 1 -.PHONY: crmodverdir +PHONY += crmodverdir crmodverdir: - $(Q)mkdir -p $(MODVERDIR) + $(cmd_crmodverdir) -.PHONY: $(objtree)/Module.symvers +PHONY += $(objtree)/Module.symvers $(objtree)/Module.symvers: @test -e $(objtree)/Module.symvers || ( \ echo; \ @@ -1110,31 +1328,35 @@ $(objtree)/Module.symvers: echo ) module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) -.PHONY: $(module-dirs) modules +PHONY += $(module-dirs) modules $(module-dirs): crmodverdir $(objtree)/Module.symvers $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) modules: $(module-dirs) - @echo ' Building modules, stage 2.'; - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost + @$(kecho) ' Building modules, stage 2.'; + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + +PHONY += modules_install +modules_install: _emodinst_ _emodinst_post -.PHONY: modules_install -modules_install: - $(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst +install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra) +PHONY += _emodinst_ +_emodinst_: + $(Q)mkdir -p $(MODLIB)/$(install-dir) + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst + +PHONY += _emodinst_post +_emodinst_post: _emodinst_ + $(call cmd,depmod) clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) -.PHONY: $(clean-dirs) clean +PHONY += $(clean-dirs) clean $(clean-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) clean: rm-dirs := $(MODVERDIR) -clean: $(clean-dirs) - $(call cmd,rmdirs) - @find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \ - \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ - -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \ - -type f -print | xargs rm -f +clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers help: @echo ' Building external modules.' @@ -1144,104 +1366,142 @@ help: @echo ' modules_install - install the module' @echo ' clean - remove generated files in module directory only' @echo '' + +# Dummies... +PHONY += prepare scripts +prepare: ; +scripts: ; endif # KBUILD_EXTMOD +clean: $(clean-dirs) + $(call cmd,rmdirs) + $(call cmd,rmfiles) + @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ + \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + -o -name '*.ko.*' \ + -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ + -o -name '*.symtypes' -o -name 'modules.order' \ + -o -name modules.builtin -o -name '.tmp_*.o.*' \ + -o -name '*.gcno' \) -type f -print | xargs rm -f + # Generate tags for editors # --------------------------------------------------------------------------- +quiet_cmd_tags = GEN $@ + cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@ -#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set -#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file. -#Adding $(srctree) adds about 20M on i386 to the size of the output file! - -ifeq ($(src),$(obj)) -__srctree = -else -__srctree = $(srctree)/ -endif - -define all-sources - ( find $(__srctree) $(RCS_FIND_IGNORE) \ - \( -name include -o -name arch \) -prune -o \ - -name '*.[chS]' -print; \ - find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \ - -name '*.[chS]' -print; \ - find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \ - -name '*.[chS]' -print; \ - find $(__srctree)include $(RCS_FIND_IGNORE) \ - \( -name config -o -name 'asm-*' \) -prune \ - -o -name '*.[chS]' -print; \ - find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \ - -name '*.[chS]' -print; \ - find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ - -name '*.[chS]' -print ) -endef - -quiet_cmd_cscope-file = FILELST cscope.files - cmd_cscope-file = $(all-sources) > cscope.files - -quiet_cmd_cscope = MAKE cscope.out - cmd_cscope = cscope -k -b -q - -cscope: FORCE - $(call cmd,cscope-file) - $(call cmd,cscope) - -quiet_cmd_TAGS = MAKE $@ -cmd_TAGS = $(all-sources) | etags - - -# Exuberant ctags works better with -I - -quiet_cmd_tags = MAKE $@ -define cmd_tags - rm -f $@; \ - CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \ - $(all-sources) | xargs ctags $$CTAGSF -a -endef - -TAGS: FORCE - $(call cmd,TAGS) - -tags: FORCE +tags TAGS cscope gtags: FORCE $(call cmd,tags) - # Scripts to check various things for consistency # --------------------------------------------------------------------------- -configcheck: - find * $(RCS_FIND_IGNORE) \ - -name '*.[hcS]' -type f -print | sort \ - | xargs $(PERL) -w scripts/checkconfig.pl +PHONY += includecheck versioncheck coccicheck namespacecheck export_report includecheck: - find * $(RCS_FIND_IGNORE) \ + find $(srctree)/* $(RCS_FIND_IGNORE) \ -name '*.[hcS]' -type f -print | sort \ - | xargs $(PERL) -w scripts/checkincludes.pl + | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl versioncheck: - find * $(RCS_FIND_IGNORE) \ + find $(srctree)/* $(RCS_FIND_IGNORE) \ -name '*.[hcS]' -type f -print | sort \ - | xargs $(PERL) -w scripts/checkversion.pl + | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl -buildcheck: - $(PERL) $(srctree)/scripts/reference_discarded.pl - $(PERL) $(srctree)/scripts/reference_init.pl +coccicheck: + $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@ namespacecheck: $(PERL) $(srctree)/scripts/namespace.pl +export_report: + $(PERL) $(srctree)/scripts/export_report.pl + endif #ifeq ($(config-targets),1) endif #ifeq ($(mixed-targets),1) -.PHONY: checkstack +PHONY += checkstack kernelrelease kernelversion image_name + +# UML needs a little special treatment here. It wants to use the host +# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone +# else wants $(ARCH), including people doing cross-builds, which means +# that $(SUBARCH) doesn't work here. +ifeq ($(ARCH), um) +CHECKSTACK_ARCH := $(SUBARCH) +else +CHECKSTACK_ARCH := $(ARCH) +endif checkstack: $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ - $(PERL) $(src)/scripts/checkstack.pl $(ARCH) + $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH) kernelrelease: - @echo $(KERNELRELEASE) + @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" + +kernelversion: + @echo $(KERNELVERSION) + +image_name: + @echo $(KBUILD_IMAGE) + +# Clear a bunch of variables before executing the submake +tools/: FORCE + $(Q)mkdir -p $(objtree)/tools + $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ -# FIXME Should go into a make.lib or something +tools/%: FORCE + $(Q)mkdir -p $(objtree)/tools + $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ $* + +# Single targets +# --------------------------------------------------------------------------- +# Single targets are compatible with: +# - build with mixed source and output +# - build with separate output dir 'make O=...' +# - external modules +# +# target-dir => where to store outputfile +# build-dir => directory in kernel source tree to use + +ifeq ($(KBUILD_EXTMOD),) + build-dir = $(patsubst %/,%,$(dir $@)) + target-dir = $(dir $@) +else + zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) + build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) + target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) +endif + +%.s: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.i: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.o: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.lst: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.s: %.S prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.o: %.S prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) +%.symtypes: %.c prepare scripts FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) + +# Modules +/: prepare scripts FORCE + $(cmd_crmodverdir) + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ + $(build)=$(build-dir) +%/: prepare scripts FORCE + $(cmd_crmodverdir) + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ + $(build)=$(build-dir) +%.ko: prepare scripts FORCE + $(cmd_crmodverdir) + $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ + $(build)=$(build-dir) $(@:.ko=.o) + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + +# FIXME Should go into a make.lib or something # =========================================================================== quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) @@ -1250,13 +1510,15 @@ quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) cmd_rmfiles = rm -f $(rm-files) +# Run depmod only if we have System.map and depmod is executable +quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) + cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ + $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))" -a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \ - $(NOSTDINC_FLAGS) $(CPPFLAGS) \ - $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o) - -quiet_cmd_as_o_S = AS $@ -cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< +# Create temporary dir for module support files +# clean it up only when building all modules +cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ + $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*) # read all saved command lines @@ -1268,82 +1530,16 @@ ifneq ($(cmd_files),) include $(cmd_files) endif -# Execute command and generate cmd file -if_changed = $(if $(strip $? \ - $(filter-out $(cmd_$(1)),$(cmd_$@))\ - $(filter-out $(cmd_$@),$(cmd_$(1)))),\ - @set -e; \ - $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \ - $(cmd_$(1)); \ - echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd) - - -# execute the command and also postprocess generated .d dependencies -# file -if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\ - $(filter-out $(cmd_$(1)),$(cmd_$@))\ - $(filter-out $(cmd_$@),$(cmd_$(1)))),\ - $(Q)set -e; \ - $(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \ - $(cmd_$(1)); \ - scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \ - rm -f $(depfile); \ - mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd) - -# Usage: $(call if_changed_rule,foo) -# will check if $(cmd_foo) changed, or any of the prequisites changed, -# and if so will execute $(rule_foo) - -if_changed_rule = $(if $(strip $? \ - $(filter-out $(cmd_$(1)),$(cmd_$(@F)))\ - $(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\ - $(Q)$(rule_$(1))) - -# If quiet is set, only print short version of command - -cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1)) - -# filechk is used to check if the content of a generated file is updated. -# Sample usage: -# define filechk_sample -# echo $KERNELRELEASE -# endef -# version.h : Makefile -# $(call filechk,sample) -# The rule defined shall write to stdout the content of the new file. -# The existing file will be compared with the new one. -# - If no file exist it is created -# - If the content differ the new file is used -# - If they are equal no change, and no timestamp update - -define filechk - @set -e; \ - echo ' CHK $@'; \ - mkdir -p $(dir $@); \ - $(filechk_$(1)) < $< > $@.tmp; \ - if [ -r $@ ] && cmp -s $@ $@.tmp; then \ - rm -f $@.tmp; \ - else \ - echo ' UPD $@'; \ - mv -f $@.tmp $@; \ - fi -endef - -# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir -# Usage: -# $(Q)$(MAKE) $(build)=dir -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj - # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj -# $(call descend,<dir>,<target>) -# Recursively call a sub-make in <dir> with target <target> -# Usage is deprecated, because make does not see this as an invocation of make. -descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2) - endif # skip-makefile +PHONY += FORCE FORCE: + +# Declare the contents of the .PHONY variable as phony. We keep that +# information in a variable so we can use it in if_changed and friends. +.PHONY: $(PHONY) |