4 files changed, 74 insertions, 3 deletions
diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt
index 4c5e3793934..1cd07c017cf 100644
--- a/Documentation/usb/WUSB-Design-overview.txt
+++ b/Documentation/usb/WUSB-Design-overview.txt
@@ -25,7 +25,7 @@ updated content.
     * Design-overview.txt-1.8
 
 This code implements a Ultra Wide Band stack for Linux, as well as
-drivers for the the USB based UWB radio controllers defined in the
+drivers for the USB based UWB radio controllers defined in the
 Wireless USB 1.0 specification (including Wireless USB host controller
 and an Intel WiNET controller).
 
diff --git a/Documentation/usb/chipidea.txt b/Documentation/usb/chipidea.txt
new file mode 100644
index 00000000000..995c8bca40e
--- /dev/null
+++ b/Documentation/usb/chipidea.txt
@@ -0,0 +1,71 @@
+1. How to test OTG FSM(HNP and SRP)
+-----------------------------------
+To show how to demo OTG HNP and SRP functions via sys input files
+with 2 Freescale i.MX6Q sabre SD boards.
+
+1.1 How to enable OTG FSM in menuconfig
+---------------------------------------
+Select CONFIG_USB_OTG_FSM, rebuild kernel Image and modules.
+If you want to check some internal variables for otg fsm,
+select CONFIG_USB_CHIPIDEA_DEBUG, there are 2 files which
+can show otg fsm variables and some controller registers value:
+cat /sys/kernel/debug/ci_hdrc.0/otg
+cat /sys/kernel/debug/ci_hdrc.0/registers
+
+1.2 Test operations
+-------------------
+1) Power up 2 Freescale i.MX6Q sabre SD boards with gadget class driver loaded
+   (e.g. g_mass_storage).
+
+2) Connect 2 boards with usb cable with one end is micro A plug, the other end
+   is micro B plug.
+
+   The A-device(with micro A plug inserted) should enumrate B-device.
+
+3) Role switch
+   On B-device:
+   echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+
+   if HNP polling is not supported, also need:
+   On A-device:
+   echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
+
+   B-device should take host role and enumrate A-device.
+
+4) A-device switch back to host.
+   On B-device:
+   echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+
+   A-device should switch back to host and enumrate B-device.
+
+5) Remove B-device(unplug micro B plug) and insert again in 10 seconds,
+   A-device should enumrate B-device again.
+
+6) Remove B-device(unplug micro B plug) and insert again after 10 seconds,
+   A-device should NOT enumrate B-device.
+
+   if A-device wants to use bus:
+   On A-device:
+   echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
+   echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
+
+   if B-device wants to use bus:
+   On B-device:
+   echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+
+7) A-device power down the bus.
+   On A-device:
+   echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
+
+   A-device should disconnect with B-device and power down the bus.
+
+8) B-device does data pulse for SRP.
+   On B-device:
+   echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
+
+   A-device should resume usb bus and enumrate B-device.
+
+1.3 Reference document
+----------------------
+"On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification
+July 27, 2012 Revision 2.0 version 1.1a"
diff --git a/Documentation/usb/gadget_multi.txt b/Documentation/usb/gadget_multi.txt
index 80f4ef0eb75..7d66a8636cb 100644
--- a/Documentation/usb/gadget_multi.txt
+++ b/Documentation/usb/gadget_multi.txt
@@ -14,7 +14,7 @@ A CDC ECM (Ethernet) function may be turned on via a Kconfig option
 and RNDIS can be turned off.  If they are both enabled the gadget will
 have two configurations -- one with RNDIS and another with CDC ECM[3].
 
-Please not that if you use non-standard configuration (that is enable
+Please note that if you use non-standard configuration (that is enable
 CDC ECM) you may need to change vendor and/or product ID.
 
 * Host drivers
diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt
index 59063ad7a60..e89803a5a96 100644
--- a/Documentation/usb/mass-storage.txt
+++ b/Documentation/usb/mass-storage.txt
@@ -13,7 +13,7 @@
   operation.
 
   Note that the driver is slightly non-portable in that it assumes
-  a single memory/DMA buffer will be useable for bulk-in and bulk-out
+  a single memory/DMA buffer will be usable for bulk-in and bulk-out
   endpoints.  With most device controllers this is not an issue, but
   there may be some with hardware restrictions that prevent a buffer
   from being used by more than one endpoint.