diff options
Diffstat (limited to 'Documentation/networking/decnet.txt')
| -rw-r--r-- | Documentation/networking/decnet.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/networking/decnet.txt b/Documentation/networking/decnet.txt index e6c39c5831f..e12a4900cf7 100644 --- a/Documentation/networking/decnet.txt +++ b/Documentation/networking/decnet.txt @@ -4,7 +4,7 @@ 1) Other documentation.... o Project Home Pages - http://www.chygwyn.com/DECnet/ - Kernel info + http://www.chygwyn.com/ - Kernel info http://linux-decnet.sourceforge.net/ - Userland tools http://www.sourceforge.net/projects/linux-decnet/ - Status page @@ -60,7 +60,7 @@ operation of the local communications in any other way though. The kernel command line takes options looking like the following: - decnet=1,2 + decnet.addr=1,2 the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels and early 2.3.xx kernels, you must use a comma when specifying the @@ -82,7 +82,7 @@ ethernet address of your ethernet card has to be set according to the DECnet address of the node in order for it to be autoconfigured (and then appear in /proc/net/decnet_dev). There is a utility available at the above FTP sites called dn2ethaddr which can compute the correct ethernet -address to use. The address can be set by ifconfig either before at +address to use. The address can be set by ifconfig either before or at the time the device is brought up. If you are using RedHat you can add the line: |