diff options
Diffstat (limited to 'Documentation/networking/README.ipw2200')
| -rw-r--r-- | Documentation/networking/README.ipw2200 | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200 index acb30c5dcff..b7658bed490 100644 --- a/Documentation/networking/README.ipw2200 +++ b/Documentation/networking/README.ipw2200 @@ -14,8 +14,8 @@ Copyright (C) 2004-2006, Intel Corporation README.ipw2200 -Version: 1.0.8 -Date : October 20, 2005 +Version: 1.1.2 +Date : March 30, 2006 Index @@ -85,7 +85,7 @@ such, if you are interested in deploying or shipping a driver as part of solution intended to be used for purposes other than development, please obtain a tested driver from Intel Customer Support at: -http://support.intel.com/support/notebook/sb/CS-006408.htm +http://support.intel.com 1. Introduction @@ -103,7 +103,7 @@ file. 1.1. Overview of Features ----------------------------------------------- -The current release (1.0.8) supports the following features: +The current release (1.1.2) supports the following features: + BSS mode (Infrastructure, Managed) + IBSS mode (Ad-Hoc) @@ -147,7 +147,7 @@ Where the supported parameter are: driver. If disabled, the driver will not attempt to scan for and associate to a network until it has been configured with one or more properties for the target network, for example configuring - the network SSID. Default is 1 (auto-associate) + the network SSID. Default is 0 (do not auto-associate) Example: % modprobe ipw2200 associate=0 @@ -171,7 +171,7 @@ Where the supported parameter are: led Can be used to turn on experimental LED code. - 0 = Off, 1 = On. Default is 0. + 0 = Off, 1 = On. Default is 1. mode Can be used to set the default mode of the adapter. @@ -247,8 +247,8 @@ and can set the contents via echo. For example: % cat /sys/bus/pci/drivers/ipw2200/debug_level Will report the current debug level of the driver's logging subsystem -(only available if CONFIG_IPW_DEBUG was configured when the driver was -built). +(only available if CONFIG_IPW2200_DEBUG was configured when the driver +was built). You can set the debug level via: @@ -256,7 +256,7 @@ You can set the debug level via: Where $VALUE would be a number in the case of this sysfs entry. The input to sysfs files does not have to be a number. For example, the -firmware loader used by hotplug utilizes sysfs entries for transfering +firmware loader used by hotplug utilizes sysfs entries for transferring the firmware image from user space into the driver. The Intel(R) PRO/Wireless 2915ABG Driver for Linux exposes sysfs entries |