diff options
Diffstat (limited to 'Documentation/hwmon/pcf8591')
| -rw-r--r-- | Documentation/hwmon/pcf8591 | 20 |
1 files changed, 9 insertions, 11 deletions
diff --git a/Documentation/hwmon/pcf8591 b/Documentation/hwmon/pcf8591 index e76a7892f68..447c0702c0e 100644 --- a/Documentation/hwmon/pcf8591 +++ b/Documentation/hwmon/pcf8591 @@ -4,14 +4,14 @@ Kernel driver pcf8591 Supported chips: * Philips/NXP PCF8591 Prefix: 'pcf8591' - Addresses scanned: I2C 0x48 - 0x4f + Addresses scanned: none Datasheet: Publicly available at the NXP website http://www.nxp.com/pip/PCF8591_6.html Authors: Aurelien Jarno <aurelien@aurel32.net> valuable contributions by Jan M. Sendler <sendler@sendler.de>, - Jean Delvare <khali@linux-fr.org> + Jean Delvare <jdelvare@suse.de> Description @@ -58,18 +58,16 @@ Module parameters Accessing PCF8591 via /sys interface ------------------------------------- -! Be careful ! -The PCF8591 is plainly impossible to detect! Stupid chip. -So every chip with address in the interval [0x48..0x4f] is -detected as PCF8591. If you have other chips in this address -range, the workaround is to load this module after the one -for your others chips. +The PCF8591 is plainly impossible to detect! Thus the driver won't even +try. You have to explicitly instantiate the device at the relevant +address (in the interval [0x48..0x4f]) either through platform data, or +using the sysfs interface. See Documentation/i2c/instantiating-devices +for details. -On detection (i.e. insmod, modprobe et al.), directories are being -created for each detected PCF8591: +Directories are being created for each instantiated PCF8591: /sys/bus/i2c/devices/<0>-<1>/ -where <0> is the bus the chip was detected on (e. g. i2c-0) +where <0> is the bus the chip is connected to (e. g. i2c-0) and <1> the chip address ([48..4f]) Inside these directories, there are such files: |