diff options
Diffstat (limited to 'Documentation/hwmon/adm1026')
| -rw-r--r-- | Documentation/hwmon/adm1026 | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/hwmon/adm1026 b/Documentation/hwmon/adm1026 index 473c689d792..d8fabe0c23a 100644 --- a/Documentation/hwmon/adm1026 +++ b/Documentation/hwmon/adm1026 @@ -6,7 +6,7 @@ Supported chips: Prefix: 'adm1026' Addresses scanned: I2C 0x2c, 0x2d, 0x2e Datasheet: Publicly available at the Analog Devices website - http://www.analog.com/en/prod/0,,766_825_ADM1026,00.html + http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026 Authors: Philip Pokorny <ppokorny@penguincomputing.com> for Penguin Computing @@ -80,7 +80,7 @@ temperature sensor inputs. Both the PWM output and the DAC output can be used to control fan speed. Usually only one of these two outputs will be used. Write the minimum PWM or DAC value to the appropriate control register. Then set the low temperature limit in the tmin values for each -temperature sensor. The range of control is fixed at 20 °C, and the +temperature sensor. The range of control is fixed at 20 °C, and the largest difference between current and tmin of the temperature sensors sets the control output. See the datasheet for several example circuits for controlling fan speed with the PWM and DAC outputs. The fan speed sensors |