diff options
Diffstat (limited to 'Documentation/dvb')
| -rw-r--r-- | Documentation/dvb/README.dvb-usb | 8 | ||||
| -rw-r--r-- | Documentation/dvb/README.flexcop | 205 | ||||
| -rw-r--r-- | Documentation/dvb/avermedia.txt | 14 | ||||
| -rw-r--r-- | Documentation/dvb/bt8xx.txt | 158 | ||||
| -rw-r--r-- | Documentation/dvb/cards.txt | 7 | ||||
| -rw-r--r-- | Documentation/dvb/ci.txt | 12 | ||||
| -rw-r--r-- | Documentation/dvb/contributors.txt | 6 | ||||
| -rw-r--r-- | Documentation/dvb/faq.txt | 12 | ||||
| -rwxr-xr-x[-rw-r--r--] | Documentation/dvb/get_dvb_firmware | 510 | ||||
| -rw-r--r-- | Documentation/dvb/lmedm04.txt | 81 | ||||
| -rw-r--r-- | Documentation/dvb/opera-firmware.txt | 27 | ||||
| -rw-r--r-- | Documentation/dvb/readme.txt | 32 | ||||
| -rw-r--r-- | Documentation/dvb/technisat.txt | 78 | ||||
| -rw-r--r-- | Documentation/dvb/udev.txt | 2 |
14 files changed, 801 insertions, 351 deletions
diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index 46b78b7331c..8eb92264ee0 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -30,7 +30,7 @@ with the device via the bus. The connection between the DVB-API-functionality is done via callbacks, assigned in a static device-description (struct dvb_usb_device) each device-driver has to have. -For an example have a look in drivers/media/dvb/dvb-usb/vp7045*. +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the ttusb; flexcop-usb already benefits from the generic flexcop-device) to use @@ -85,7 +85,7 @@ http://www.linuxtv.org/wiki/index.php/DVB_USB - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems better settled there (added xfer_ops-struct) - created a common files for frontends (mc/p/mb) - 2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek) + 2004-09-28 - added support for a new device (Unknown, vendor ID is Hyper-Paltek) 2004-09-20 - added support for a new device (Compro DVB-U2000), thanks to Amaury Demol for reporting - changed usb TS transfer method (several urbs, stopping transfer @@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged in the device). If you want to enable debug output, you have to load the driver manually and -from withing the dvb-kernel cvs repository. +from within the dvb-kernel cvs repository. first have a look, which debug level are available: @@ -228,5 +228,5 @@ Patches, comments and suggestions are very very welcome. Ulf Hermenau for helping me out with traditional chinese. - André Smoktun and Christian Frömmel for supporting me with + André Smoktun and Christian Frömmel for supporting me with hardware and listening to my problems very patiently. diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop deleted file mode 100644 index 5515469de7c..00000000000 --- a/Documentation/dvb/README.flexcop +++ /dev/null @@ -1,205 +0,0 @@ -This README escorted the skystar2-driver rewriting procedure. It describes the -state of the new flexcop-driver set and some internals are written down here -too. - -This document hopefully describes things about the flexcop and its -device-offsprings. Goal was to write an easy-to-write and easy-to-read set of -drivers based on the skystar2.c and other information. - -Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been -touched and rewritten. - -History & News -============== - 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana) - - - - -General coding processing -========================= - -We should proceed as follows (as long as no one complains): - -0) Think before start writing code! - -1) rewriting the skystar2.c with the help of the flexcop register descriptions -and splitting up the files to a pci-bus-part and a flexcop-part. -The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the -device-specific part and b2c2-flexcop.ko for the common flexcop-functions. - -2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c -and other pci drivers) - -3) make some beautification (see 'Improvements when rewriting (refactoring) is -done') - -4) Testing the new driver and maybe substitute the skystar2.c with it, to reach -a wider tester audience. - -5) creating an usb-bus-part using the already written flexcop code for the pci -card. - -Idea: create a kernel-object for the flexcop and export all important -functions. This option saves kernel-memory, but maybe a lot of functions have -to be exported to kernel namespace. - - -Current situation -================= - -0) Done :) -1) Done (some minor issues left) -2) Done -3) Not ready yet, more information is necessary -4) next to be done (see the table below) -5) USB driver is working (yes, there are some minor issues) - -What seems to be ready? ------------------------ - -1) Rewriting -1a) i2c is cut off from the flexcop-pci.c and seems to work -1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c -1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c -1e) eeprom (reading MAC address) -1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) -1f) misc. register accesses for reading parameters (e.g. resetting, revision) -1g) pid/mac filter (flexcop-hw-filter.c) -1i) dvb-stuff initialization in flexcop.c (done) -1h) dma stuff (now just using the size-irq, instead of all-together, to be done) -1j) remove flexcop initialization from flexcop-pci.c completely (done) -1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') -1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from -non-static where possible, moved code to proper places) - -2) Search for errors in the leftover of flexcop-pci.c (partially done) -5a) add MAC address reading -5c) feeding of ISOC data to the software demux (format of the isochronous data -and speed optimization, no real error) (thanks to Vadim Catana) - -What to do in the near future? --------------------------------------- -(no special order here) - -5) USB driver -5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) - -Testing changes ---------------- - -O = item is working -P = item is partially working -X = item is not working -N = item does not apply here -<empty field> = item need to be examined - - | PCI | USB -item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 --------+-------+---------+---------+-------+-------+---------+---------+------- -1a) | O | | | | N | N | N | N -1b) | O | | | | | | O | -1c) | N | N | | | N | N | O | -1d) | O | O -1e) | O | O -1f) | P -1g) | O -1h) | P | -1i) | O | N -1j) | O | N -1l) | O | N -2) | O | N -5a) | N | O -5b)* | N | -5c) | N | O - -* - not done yet - -Known bugs and problems and TODO --------------------------------- - -1g/h/l) when pid filtering is enabled on the pci card - -DMA usage currently: - The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first - address and triggers an IRQ when it's full and starts writing to the second - address. When the second address is full, the IRQ is triggered again, and - the flexcop writes to first address again, and so on. - The buffersize of each address is currently 640*188 bytes. - - Problem is, when using hw-pid-filtering and doing some low-bandwidth - operation (like scanning) the buffers won't be filled enough to trigger - the IRQ. That's why: - - When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ - is triggered. Is the current write address of DMA1 different to the one - during the last IRQ, then the data is passed to the demuxer. - - There is an additional DMA-IRQ-method: packet count IRQ. This isn't - implemented correctly yet. - - The solution is to disable HW PID filtering, but I don't know how the DVB - API software demux behaves on slow systems with 45MBit/s TS. - -Solved bugs :) --------------- -1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't -working) -SOLUTION: also index 0 was affected, because net_translation is done for -these indexes by default - -5b) isochronous transfer does only work in the first attempt (for the Sky2PC -USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really -woke up again (don't know if this need fixes, see -flexcop-fe-tuner.c:flexcop_sleep) - -NEWS: when the driver is loaded and unloaded and loaded again (w/o doing -anything in the while the driver is loaded the first time), no transfers take -place anymore. - -Improvements when rewriting (refactoring) is done -================================================= - -- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control - (enable sleeping for other demods than dvb-s) -- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA) - -Debugging ---------- -- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it - with this flexcop, this is important, because i2c is now using the - flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for - that, please tell us so). - -Everything which is identical in the following table, can be put into a common -flexcop-module. - - PCI USB -------------------------------------------------------------------------------- -Different: -Register access: accessing IO memory USB control message -I2C bus: I2C bus of the FC USB control message -Data transfer: DMA isochronous transfer -EEPROM transfer: through i2c bus not clear yet - -Identical: -Streaming: accessing registers -PID Filtering: accessing registers -Sram destinations: accessing registers -Tuner/Demod: I2C bus -DVB-stuff: can be written for common use - -Acknowledgements (just for the rewriting part) -================ - -Bjarne Steinsbo thought a lot in the first place of the pci part for this code -sharing idea. - -Andreas Oberritter for providing a recent PCI initialization template -(pluto2.c). - -Boleslaw Ciesielski for pointing out a problem with firmware loader. - -Vadim Catana for correcting the USB transfer. - -comments, critics and ideas to linux-dvb@linuxtv.org. diff --git a/Documentation/dvb/avermedia.txt b/Documentation/dvb/avermedia.txt index 068070ff13c..e44c009ac6c 100644 --- a/Documentation/dvb/avermedia.txt +++ b/Documentation/dvb/avermedia.txt @@ -1,4 +1,3 @@ - HOWTO: Get An Avermedia DVB-T working under Linux ______________________________________________ @@ -46,9 +45,9 @@ Assumptions and Introduction by circuitry on the card and is often presented uncompressed. For a PAL TV signal encoded at a resolution of 768x576 24-bit color pixels over 25 frames per second - a fair amount of data - is generated and must be proceesed by the PC before it can be + is generated and must be processed by the PC before it can be displayed on the video monitor screen. Some Analogue TV cards - for PC's have onboard MPEG2 encoders which permit the raw + for PCs have onboard MPEG2 encoders which permit the raw digital data stream to be presented to the PC in an encoded and compressed form - similar to the form that is used in Digital TV. @@ -137,11 +136,8 @@ Getting the card going To power up the card, load the following modules in the following order: - * insmod dvb-core.o - * modprobe bttv.o - * insmod bt878.o - * insmod dvb-bt8xx.o - * insmod sp887x.o + * modprobe bttv (normally loaded automatically) + * modprobe dvb-bt8xx (or place dvb-bt8xx in /etc/modules) Insertion of these modules into the running kernel will activate the appropriate DVB device nodes. It is then possible @@ -302,4 +298,4 @@ Further Update Many thanks to Nigel Pearson for the updates to this document since the recent revision of the driver. - January 29th 2004 + February 14th 2006 diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index df6c05453cb..b7b1d1b1da4 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -1,114 +1,98 @@ -How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working -========================================================================== +How to get the bt8xx cards working +================================== -This class of cards has a bt878a as the PCI interface, and -require the bttv driver. +1) General information +====================== -Please pay close attention to the warning about the bttv module -options below for the DST card. +This class of cards has a bt878a as the PCI interface, and require the bttv driver +for accessing the i2c bus and the gpio pins of the bt8xx chipset. +Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge: -1) General informations -======================= +Compiling kernel please enable: +a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Enable Video for Linux API 1 (DEPRECATED)" +b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Video Capture Adapters" => "BT848 Video For Linux" +c.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards" -These drivers require the bttv driver to provide the means to access -the i2c bus and the gpio pins of the bt8xx chipset. +Please use the following options with care as deselection of drivers which are in fact necessary +may result in DVB devices that cannot be tuned due to lack of driver support: +You can save RAM by deselecting every frontend module that your DVB card does not need. -Because of this, you need to enable -"Device drivers" => "Multimedia devices" - => "Video For Linux" => "BT848 Video For Linux" +First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling: +d.) "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules as needed" -Furthermore you need to enable -"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" - => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards" +If you know the frontend driver that your card needs please enable: +e.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" + => "DVB for Linux" "DVB Core Support" "Customise DVB Frontends" => "Customise the frontend modules to build" + Then please select your card-specific frontend module. 2) Loading Modules ================== -In general you need to load the bttv driver, which will handle the gpio and -i2c communication for us, plus the common dvb-bt8xx device driver. -The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst), -FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded -automatically by the dvb-bt8xx device driver. +Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically. +Exceptions are: +- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom. +People running udev please see Documentation/dvb/udev.txt. -3a) Nebula / Pinnacle PCTV / FusionHDTV Lite ---------------------------------------------- +In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary: - $ modprobe bttv (normally bttv is being loaded automatically by kmod) - $ modprobe dvb-bt8xx +2a) Running TwinHan and Clones +------------------------------ -(or just place dvb-bt8xx in /etc/modules for automatic loading) + $ modprobe bttv card=113 + $ modprobe dst +Useful parameters for verbosity level and debugging the dst module: -3b) TwinHan and Clones --------------------------- - - $ modprobe bttv card=0x71 - $ modprobe dvb-bt8xx - $ modprobe dst - -The value 0x71 will override the PCI type detection for dvb-bt8xx, -which is necessary for TwinHan cards. Omission of this parameter might result -in a system lockup. - -If you're having an older card (blue color PCB) and card=0x71 locks up -your machine, try using 0x68, too. If that does not work, ask on the -mailing list. - -The DST module takes a couple of useful parameters. - -verbose takes values 0 to 4. These values control the verbosity level, -and can be used to debug also. - -verbose=0 means complete disabling of messages - 1 only error messages are displayed - 2 notifications are also displayed - 3 informational messages are also displayed - 4 debug setting +verbose=0: messages are disabled + 1: only error messages are displayed + 2: notifications are displayed + 3: other useful messages are displayed + 4: debug setting +dst_addons=0: card is a free to air (FTA) card only + 0x20: card has a conditional access slot for scrambled channels -dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card. -0x20 means it has a Conditional Access slot. +The autodetected values are determined by the cards' "response string". +In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI]. +For bug reports please send in a complete log with verbose=4 activated. +Please also see Documentation/dvb/ci.txt. -The autodetected values are determined by the cards 'response string' -which you can see in your logs e.g. - -dst_get_device_id: Recognise [DSTMCI] - -If you need to sent in bug reports on the dst, please do send in a complete -log with the verbose=4 module parameter. For general usage, the default setting -of verbose=1 is ideal. - - -4) Multiple cards +2b) Running multiple cards -------------------------- -If you happen to be running multiple cards, it would be advisable to load -the bttv module with the card id. This would help to solve any module loading -problems that you might face. - -For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite - - $ modprobe bttv card=0x71 card=0x87 +Examples of card ID's: -Here the order of the card id is important and should be the same as that of the -physical order of the cards. Here card=0x71 represents the Twinhan and clones -and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be -specified in decimal, rather than hex: +Pinnacle PCTV Sat: 94 +Nebula Electronics Digi TV: 104 +pcHDTV HD-2000 TV: 112 +Twinhan DST and clones: 113 +Avermedia AverTV DVB-T 771: 123 +Avermedia AverTV DVB-T 761: 124 +DViCO FusionHDTV DVB-T Lite: 128 +DViCO FusionHDTV 5 Lite: 135 +Notice: The order of the card ID should be uprising: +Example: $ modprobe bttv card=113 card=135 -Some examples of card-id's +For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv. +In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org. -Pinnacle Sat 0x5e (94) -Nebula Digi TV 0x68 (104) -PC HDTV 0x70 (112) -Twinhan 0x71 (113) -FusionHDTV DVB-T Lite 0x80 (128) -FusionHDTV5 Lite 0x87 (135) +2c) Probing the cards with broken PCI subsystem ID +-------------------------------------------------- +There are some TwinHan cards that the EEPROM has become corrupted for some +reason. The cards do not have correct PCI subsystem ID. But we can force +probing the cards with broken PCI subsystem ID -For a full list of card-id's, see the V4L Documentation within the kernel -source: linux/Documentation/video4linux/CARDLIST.bttv + $ echo 109e 0878 $subvendor $subdevice > \ + /sys/bus/pci/drivers/bt878/new_id -If you have problems with this please do ask on the mailing list. +109e: PCI_VENDOR_ID_BROOKTREE +0878: PCI_DEVICE_ID_BROOKTREE_878 --- -Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham +Authors: Richard Walker, + Jamie Honan, + Michael Hunold, + Manu Abraham, + Uwe Bugla, + Michael Krufky diff --git a/Documentation/dvb/cards.txt b/Documentation/dvb/cards.txt index 9e10092440e..97709e9a307 100644 --- a/Documentation/dvb/cards.txt +++ b/Documentation/dvb/cards.txt @@ -5,7 +5,7 @@ Hardware supported by the linuxtv.org DVB drivers frontends (i.e. tuner / demodulator units) used, usually without changing the product name, revision number or specs. Some cards are also available in versions with different frontends for - DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed seperately. + DVB-S/DVB-C/DVB-T. Thus the frontend drivers are listed separately. Note 1: There is no guarantee that every frontend driver works out of the box with every card, because of different wiring. @@ -22,10 +22,10 @@ o Frontends drivers: - ves1x93 : Alps BSRV2 (ves1893 demodulator) and dbox2 (ves1993) - cx24110 : Conexant HM1221/HM1811 (cx24110 or cx24106 demod, cx24108 PLL) - grundig_29504-491 : Grundig 29504-491 (Philips TDA8083 demodulator), tsa5522 PLL - - mt312 : Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLL + - mt312 : Zarlink mt312 or Mitel vp310 demodulator, sl1935 or tsa5059 PLLi, Technisat Sky2Pc with bios Rev. 2.3 - stv0299 : Alps BSRU6 (tsa5059 PLL), LG TDQB-S00x (tsa5059 PLL), LG TDQF-S001F (sl1935 PLL), Philips SU1278 (tua6100 PLL), - Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB + Philips SU1278SH (tsa5059 PLL), Samsung TBMU24112IMB, Technisat Sky2Pc with bios Rev. 2.6 DVB-C: - ves1820 : various (ves1820 demodulator, sp5659c or spXXXX PLL) - at76c651 : Atmel AT76c651(B) with DAT7021 PLL @@ -119,4 +119,5 @@ o Cards based on the Phillips saa7134 PCI bridge: - Compro Videomate DVB-T300 - Compro Videomate DVB-T200 - AVerMedia AVerTVHD MCE A180 + - KWorld PC150-U ATSC Hybrid diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt index 95f0e73b213..6c3bda50f7d 100644 --- a/Documentation/dvb/ci.txt +++ b/Documentation/dvb/ci.txt @@ -32,7 +32,7 @@ This application requires the following to function properly as of now. descrambler to function, eg: $ ca_zap channels.conf "TMC" - (d) Hopeflly Enjoy your favourite subscribed channel as you do with + (d) Hopefully enjoy your favourite subscribed channel as you do with a FTA card. (3) Currently ca_zap, and dst_test, both are meant for demonstration @@ -41,13 +41,13 @@ This application requires the following to function properly as of now. * Cards that fall in this category ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -At present the cards that fall in this category are the Twinhan and it's +At present the cards that fall in this category are the Twinhan and its clones, these cards are available as VVMER, Tomato, Hercules, Orange and so on. * CI modules that are supported ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The CI module support is largely dependant upon the firmware on the cards +The CI module support is largely dependent upon the firmware on the cards Some cards do support almost all of the available CI modules. There is nothing much that can be done in order to make additional CI modules working with these cards. @@ -65,13 +65,13 @@ Modules that have been tested by this driver at present are ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ With the High Level CI approach any new card with almost any random architecture can be implemented with this style, the definitions -insidethe switch statement can be easily adapted for any card, thereby +inside the switch statement can be easily adapted for any card, thereby eliminating the need for any additional ioctls. The disadvantage is that the driver/hardware has to manage the rest. For the application programmer it would be as simple as sending/receiving an array to/from the CI ioctls as defined in the Linux DVB API. No changes -have been made in the API to accomodate this feature. +have been made in the API to accommodate this feature. * Why the need for another CI interface ? @@ -102,7 +102,7 @@ This CI interface follows the CI high level interface, which is not implemented by most applications. Hence this area is revisited. This CI interface is quite different in the case that it tries to -accomodate all other CI based devices, that fall into the other categories +accommodate all other CI based devices, that fall into the other categories. This means that this CI interface handles the EN50221 style tags in the Application layer only and no session management is taken care of by the diff --git a/Documentation/dvb/contributors.txt b/Documentation/dvb/contributors.txt index 4c33cced5f6..731a009723c 100644 --- a/Documentation/dvb/contributors.txt +++ b/Documentation/dvb/contributors.txt @@ -1,7 +1,7 @@ Thanks go to the following people for patches and contributions: Michael Hunold <m.hunold@gmx.de> - for the initial saa7146 driver and it's recent overhaul + for the initial saa7146 driver and its recent overhaul Christian Theiss for his work on the initial Linux DVB driver @@ -66,7 +66,7 @@ Michael Dreher <michael@5dot1.de> Andreas 'randy' Weinberger for the support of the Fujitsu-Siemens Activy budget DVB-S -Kenneth Aafløy <ke-aa@frisurf.no> +Kenneth Aafløy <ke-aa@frisurf.no> for adding support for Typhoon DVB-S budget card Ernst Peinlich <e.peinlich@inode.at> @@ -78,7 +78,7 @@ Peter Beutner <p.beutner@gmx.net> Wilson Michaels <wilsonmichaels@earthlink.net> for the lgdt330x frontend driver, and various bugfixes -Michael Krufky <mkrufky@m1k.net> +Michael Krufky <mkrufky@linuxtv.org> for maintaining v4l/dvb inter-tree dependencies Taylor Jacob <rtjacob@earthlink.net> diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt index a42132d60dc..97b1373f242 100644 --- a/Documentation/dvb/faq.txt +++ b/Documentation/dvb/faq.txt @@ -5,7 +5,7 @@ Some very frequently asked questions about linuxtv-dvb It's not a bug, it's a feature. Because the frontends have significant power requirements (and hence get very hot), they are powered down if they are unused (i.e. if the frontend device - is closed). The dvb-core.o module paramter "dvb_shutdown_timeout" + is closed). The dvb-core.o module parameter "dvb_shutdown_timeout" allow you to change the timeout (default 5 seconds). Setting the timeout to 0 disables the timeout feature. @@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb the TuxBox CVS many interesting DVB applications and the dBox2 DVB source - http://sourceforge.net/projects/dvbsak/ + http://www.linuxtv.org/downloads/ DVB Swiss Army Knife library and utilities http://www.nenie.org/misc/mpsys/ @@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb 5. The dvb_net device doesn't give me any packets at all Run tcpdump on the dvb0_0 interface. This sets the interface - into promiscous mode so it accepts any packets from the PID + into promiscuous mode so it accepts any packets from the PID you have configured with the dvbnet utility. Check if there are any packets with the IP addr and MAC addr you have configured with ifconfig. @@ -138,7 +138,7 @@ Some very frequently asked questions about linuxtv-dvb - v4l2-common: common functions for Video4Linux-2 drivers - - v4l1-compat: backward compatiblity layer for Video4Linux-1 legacy + - v4l1-compat: backward compatibility layer for Video4Linux-1 legacy applications - dvb-core: DVB core module. This provides you with the @@ -150,10 +150,10 @@ Some very frequently asked questions about linuxtv-dvb - saa7146_vv: SAA7146 video and vbi functions. These are only needed for full-featured cards. - - video-buf: capture helper module for the saa7146_vv driver. This + - videobuf-dma-sg: capture helper module for the saa7146_vv driver. This one is responsible to handle capture buffers. - - dvb-ttpci: The main driver for AV7110 based, full-featued + - dvb-ttpci: The main driver for AV7110 based, full-featured DVB-S/C/T cards eof diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 75c28a17409..d91b8be80b6 100644..100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -21,9 +21,15 @@ use File::Temp qw/ tempdir /; use IO::Handle; -@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t", - "dec2540t", "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", - "or51211", "or51132_qam", "or51132_vsb", "bluebird"); +@components = ( "sp8870", "sp887x", "tda10045", "tda10046", + "tda10046lifeview", "av7110", "dec2000t", "dec2540t", + "dec3000s", "vp7041", "vp7049", "dibusb", "nxt2002", "nxt2004", + "or51211", "or51132_qam", "or51132_vsb", "bluebird", + "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718", + "af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395", + "lme2510c_s7395_old", "drxk", "drxk_terratec_h5", + "drxk_hauppauge_hvr930c", "tda10071", "it9135", "drxk_pctv", + "drxk_terratec_htc_stick", "sms1xxx_hcw"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -35,8 +41,8 @@ for ($i=0; $i < scalar(@components); $i++) { $outfile = eval($cid); die $@ if $@; print STDERR <<EOF; -Firmware $outfile extracted successfully. -Now copy it to either /usr/lib/hotplug/firmware or /lib/firmware +Firmware(s) $outfile extracted successfully. +Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). EOF exit(0); @@ -55,7 +61,7 @@ syntax(); sub sp8870 { my $sourcefile = "tt_Premium_217g.zip"; - my $url = "http://www.technotrend.de/new/217g/$sourcefile"; + my $url = "http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/$sourcefile"; my $hash = "53970ec17a538945a6d8cb608a7b3899"; my $outfile = "dvb-fe-sp8870.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); @@ -109,9 +115,27 @@ sub tda10045 { } sub tda10046 { - my $sourcefile = "tt_budget_217g.zip"; - my $url = "http://www.technotrend.de/new/217g/$sourcefile"; - my $hash = "6a7e1e2f2644b162ff0502367553c72d"; + my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip"; + my $url = "http://technotrend.com.ua/download/software/219/$sourcefile"; + my $hash = "6a7e1e2f2644b162ff0502367553c72d"; + my $outfile = "dvb-fe-tda10046.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url); + unzip($sourcefile, $tmpdir); + extract("$tmpdir/TT_PCI_2.19h_28_11_2006/software/OEM/PCI/App/ttlcdacc.dll", 0x65389, 24478, "$tmpdir/fwtmp"); + verify("$tmpdir/fwtmp", $hash); + copy("$tmpdir/fwtmp", $outfile); + + $outfile; +} + +sub tda10046lifeview { + my $sourcefile = "7%5Cdrv_2.11.02.zip"; + my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile"; + my $hash = "1ea24dee4eea8fe971686981f34fd2e0"; my $outfile = "dvb-fe-tda10046.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); @@ -119,7 +143,7 @@ sub tda10046 { wgetfile($sourcefile, $url); unzip($sourcefile, $tmpdir); - extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp"); + extract("$tmpdir/LVHybrid.sys", 0x8b088, 24602, "$tmpdir/fwtmp"); verify("$tmpdir/fwtmp", $hash); copy("$tmpdir/fwtmp", $outfile); @@ -191,6 +215,45 @@ sub dec3000s { $outfile; } +sub opera1{ + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); + + checkstandard(); + my $fwfile1="dvb-usb-opera1-fpga-01.fw"; + my $fwfile2="dvb-usb-opera-01.fw"; + extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw"); + extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1"); + extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2"); + delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1"); + delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1"); + verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70"); + verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1"); + verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d"); + + my $RES1="\x01\x92\x7f\x00\x01\x00"; + my $RES0="\x01\x92\x7f\x00\x00\x00"; + my $DAT1="\x01\x00\xe6\x00\x01\x00"; + my $DAT0="\x01\x00\xe6\x00\x00\x00"; + open FW,">$tmpdir/opera.fw"; + print FW "$RES1"; + print FW "$DAT1"; + print FW "$RES1"; + print FW "$DAT1"; + appendfile(FW,"$tmpdir/fw1part1-1"); + print FW "$RES0"; + print FW "$DAT0"; + print FW "$RES1"; + print FW "$DAT1"; + appendfile(FW,"$tmpdir/fw1part2-1"); + print FW "$RES1"; + print FW "$DAT1"; + print FW "$RES0"; + print FW "$DAT0"; + copy ("$tmpdir/opera1-fpga.fw",$fwfile1); + copy ("$tmpdir/opera.fw",$fwfile2); + + $fwfile1.",".$fwfile2; +} sub vp7041 { my $sourcefile = "2.422.zip"; @@ -226,8 +289,21 @@ sub vp7041 { $outfile; } +sub vp7049 { + my $fwfile = "dvb-usb-vp7049-0.95.fw"; + my $url = "http://ao2.it/sites/default/files/blog/2012/11/06/linux-support-digicom-digitune-s-vp7049-udtt7049/$fwfile"; + my $hash = "5609fd295168aea88b25ff43a6f79c36"; + + checkstandard(); + + wgetfile($fwfile, $url); + verify($fwfile, $hash); + + $fwfile; +} + sub dibusb { - my $url = "http://www.linuxtv.org/downloads/firmware/dvb-dibusb-5.0.0.11.fw"; + my $url = "http://www.linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw"; my $outfile = "dvb-dibusb-5.0.0.11.fw"; my $hash = "fa490295a527360ca16dcdf3224ca243"; @@ -240,9 +316,9 @@ sub dibusb { } sub nxt2002 { - my $sourcefile = "Broadband4PC_4_2_11.zip"; + my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip"; my $url = "http://www.bbti.us/download/windows/$sourcefile"; - my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a"; + my $hash = "476befae8c7c1bb9648954060b1eec1f"; my $outfile = "dvb-fe-nxt2002.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); @@ -250,15 +326,15 @@ sub nxt2002 { wgetfile($sourcefile, $url); unzip($sourcefile, $tmpdir); - verify("$tmpdir/SkyNETU.sys", $hash); - extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile); + verify("$tmpdir/SkyNET.sys", $hash); + extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile); $outfile; } sub nxt2004 { my $sourcefile = "AVerTVHD_MCE_A180_Drv_v1.2.2.16.zip"; - my $url = "http://www.aver.com/support/Drivers/$sourcefile"; + my $url = "http://www.avermedia-usa.com/support/Drivers/$sourcefile"; my $hash = "111cb885b1e009188346d72acfed024c"; my $outfile = "dvb-fe-nxt2004.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); @@ -286,6 +362,136 @@ sub or51211 { $fwfile; } +sub cx231xx { + my $fwfile = "v4l-cx231xx-avcore-01.fw"; + my $url = "http://linuxtv.org/downloads/firmware/$fwfile"; + my $hash = "7d3bb956dc9df0eafded2b56ba57cc42"; + + checkstandard(); + + wgetfile($fwfile, $url); + verify($fwfile, $hash); + + $fwfile; +} + +sub cx18 { + my $url = "http://linuxtv.org/downloads/firmware/"; + + my %files = ( + 'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a', + 'v4l-cx23418-cpu.fw' => 'b6c7ed64bc44b1a6e0840adaeac39d79', + 'v4l-cx23418-dig.fw' => '95bc688d3e7599fd5800161e9971cc55', + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + +sub mpc718 { + my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip'; + my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive"; + my $fwfile = "dvb-cx18-mpc718-mt352.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + wgetfile($archive, $url); + unzip($archive, $tmpdir); + + my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys"; + my $found = 0; + + open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n"; + binmode IN; + open OUT, '>', $fwfile; + binmode OUT; + { + # Block scope because we change the line terminator variable $/ + my $prevlen = 0; + my $currlen; + + # Buried in the data segment are 3 runs of almost identical + # register-value pairs that end in 0x5d 0x01 which is a "TUNER GO" + # command for the MT352. + # Pull out the middle run (because it's easy) of register-value + # pairs to make the "firmware" file. + + local $/ = "\x5d\x01"; # MT352 "TUNER GO" + + while (<IN>) { + $currlen = length($_); + if ($prevlen == $currlen && $currlen <= 64) { + chop; chop; # Get rid of "TUNER GO" + s/^\0\0//; # get rid of leading 00 00 if it's there + printf OUT "$_"; + $found = 1; + last; + } + $prevlen = $currlen; + } + } + close OUT; + close IN; + if (!$found) { + unlink $fwfile; + die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n"; + } + $fwfile; +} + +sub cx23885 { + my $url = "http://linuxtv.org/downloads/firmware/"; + + my %files = ( + 'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb', + 'v4l-cx23885-enc.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb', + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + +sub pvrusb2 { + my $url = "http://linuxtv.org/downloads/firmware/"; + + my %files = ( + 'v4l-cx25840.fw' => 'dadb79e9904fc8af96e8111d9cb59320', + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + sub or51132_qam { my $fwfile = "dvb-fe-or51132-qam.fw"; my $url = "http://linuxtv.org/downloads/firmware/$fwfile"; @@ -325,6 +531,258 @@ sub bluebird { $outfile; } +sub af9015 { + my $sourcefile = "download.ashx?file=57"; + my $url = "http://www.ite.com.tw/EN/Services/$sourcefile"; + my $hash = "e3f08935158038d385ad382442f4bb2d"; + my $outfile = "dvb-usb-af9015.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + my $fwoffset = 0x25690; + my $fwlength = 18725; + my ($chunklength, $buf, $rcount); + + checkstandard(); + + wgetfile($sourcefile, $url); + unzip($sourcefile, $tmpdir); + verify("$tmpdir/Driver/Files/AF15BDA.sys", $hash); + + open INFILE, '<', "$tmpdir/Driver/Files/AF15BDA.sys"; + open OUTFILE, '>', $outfile; + + sysseek(INFILE, $fwoffset, SEEK_SET); + while($fwlength > 0) { + $chunklength = 55; + $chunklength = $fwlength if ($chunklength > $fwlength); + $rcount = sysread(INFILE, $buf, $chunklength); + die "Ran out of data\n" if ($rcount != $chunklength); + syswrite(OUTFILE, $buf); + sysread(INFILE, $buf, 8); + $fwlength -= $rcount + 8; + } + + close OUTFILE; + close INFILE; +} + +sub ngene { + my $url = "http://www.digitaldevices.de/download/"; + my $file1 = "ngene_15.fw"; + my $hash1 = "d798d5a757121174f0dbc5f2833c0c85"; + my $file2 = "ngene_17.fw"; + my $hash2 = "26b687136e127b8ac24b81e0eeafc20b"; + my $url2 = "http://l4m-daten.de/downloads/firmware/dvb-s2/linux/all/"; + my $file3 = "ngene_18.fw"; + my $hash3 = "ebce3ea769a53e3e0b0197c3b3f127e3"; + + checkstandard(); + + wgetfile($file1, $url . $file1); + verify($file1, $hash1); + + wgetfile($file2, $url . $file2); + verify($file2, $hash2); + + wgetfile($file3, $url2 . $file3); + verify($file3, $hash3); + + "$file1, $file2, $file3"; +} + +sub az6027{ + my $firmware = "dvb-usb-az6027-03.fw"; + my $url = "http://linux.terratec.de/files/TERRATEC_S7/$firmware"; + + wgetfile($firmware, $url); + + $firmware; +} + +sub lme2510_lg { + my $sourcefile = "LMEBDA_DVBS.sys"; + my $hash = "fc6017ad01e79890a97ec53bea157ed2"; + my $outfile = "dvb-usb-lme2510-lg.fw"; + my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 4168, 3841, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub lme2510c_s7395 { + my $sourcefile = "US2A0D.sys"; + my $hash = "b0155a8083fb822a3bd47bc360e74601"; + my $outfile = "dvb-usb-lme2510c-s7395.fw"; + my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 37248, 3720, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub lme2510c_s7395_old { + my $sourcefile = "LMEBDA_DVBS7395C.sys"; + my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31"; + my $outfile = "dvb-usb-lme2510c-s7395.fw"; + my $hasho = "90430c5b435eb5c6f88fd44a9d950674"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 4208, 3881, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub drxk { + my $url = "http://l4m-daten.de/files/"; + my $zipfile = "DDTuner.zip"; + my $hash = "f5a37b9a20a3534997997c0b1382a3e5"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + my $drvfile = "DDTuner.sys"; + my $fwfile = "drxk_a3.mc"; + + checkstandard(); + + wgetfile($zipfile, $url . $zipfile); + verify($zipfile, $hash); + unzip($zipfile, $tmpdir); + extract("$tmpdir/$drvfile", 0x14dd8, 15634, "$fwfile"); + + "$fwfile" +} + +sub drxk_hauppauge_hvr930c { + my $url = "http://www.wintvcd.co.uk/drivers/"; + my $zipfile = "HVR-9x0_5_10_325_28153_SIGNED.zip"; + my $hash = "83ab82e7e9480ec8bf1ae0155ca63c88"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + my $drvfile = "HVR-900/emOEM.sys"; + my $fwfile = "dvb-usb-hauppauge-hvr930c-drxk.fw"; + + checkstandard(); + + wgetfile($zipfile, $url . $zipfile); + verify($zipfile, $hash); + unzip($zipfile, $tmpdir); + extract("$tmpdir/$drvfile", 0x117b0, 42692, "$fwfile"); + + "$fwfile" +} + +sub drxk_terratec_h5 { + my $url = "http://www.linuxtv.org/downloads/firmware/"; + my $hash = "19000dada8e2741162ccc50cc91fa7f1"; + my $fwfile = "dvb-usb-terratec-h5-drxk.fw"; + + checkstandard(); + + wgetfile($fwfile, $url . $fwfile); + verify($fwfile, $hash); + + "$fwfile" +} + +sub drxk_terratec_htc_stick { + my $url = "http://ftp.terratec.de/Receiver/Cinergy_HTC_Stick/Updates/History/"; + my $zipfile = "Cinergy_HTC_Stick_Drv_5.09.1202.00_XP_Vista_7.exe"; + my $hash = "6722a2442a05423b781721fbc069ed5e"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); + my $drvfile = "Cinergy HTC Stick/BDA Driver 5.09.1202.00/Windows 32 Bit/emOEM.sys"; + my $fwfile = "dvb-usb-terratec-htc-stick-drxk.fw"; + + checkstandard(); + + wgetfile($zipfile, $url . $zipfile); + verify($zipfile, $hash); + unzip($zipfile, $tmpdir); + extract("$tmpdir/$drvfile", 0x4e5c0, 42692, "$fwfile"); + + "$fwfile" +} + +sub it9135 { + my $sourcefile = "dvb-usb-it9135.zip"; + my $url = "http://www.ite.com.tw/uploads/firmware/v3.6.0.0/$sourcefile"; + my $hash = "1e55f6c8833f1d0ae067c2bb2953e6a9"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0); + my $outfile = "dvb-usb-it9135.fw"; + my $fwfile1 = "dvb-usb-it9135-01.fw"; + my $fwfile2 = "dvb-usb-it9135-02.fw"; + + checkstandard(); + + wgetfile($sourcefile, $url); + unzip($sourcefile, $tmpdir); + verify("$tmpdir/$outfile", $hash); + extract("$tmpdir/$outfile", 64, 8128, "$fwfile1"); + extract("$tmpdir/$outfile", 12866, 5817, "$fwfile2"); + + "$fwfile1 $fwfile2" +} + +sub tda10071 { + my $sourcefile = "PCTV_460e_reference.zip"; + my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/"; + my $hash = "4403de903bf2593464c8d74bbc200a57"; + my $fwfile = "dvb-fe-tda10071.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url . $sourcefile); + verify($sourcefile, $hash); + unzip($sourcefile, $tmpdir); + extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x67d38, 40504, $fwfile); + + "$fwfile"; +} + +sub drxk_pctv { + my $sourcefile = "PCTV_460e_reference.zip"; + my $url = "ftp://ftp.pctvsystems.com/TV/driver/PCTV%2070e%2080e%20100e%20320e%20330e%20800e/"; + my $hash = "4403de903bf2593464c8d74bbc200a57"; + my $fwfile = "dvb-demod-drxk-pctv.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url . $sourcefile); + verify($sourcefile, $hash); + unzip($sourcefile, $tmpdir); + extract("$tmpdir/PCTV\ 70e\ 80e\ 100e\ 320e\ 330e\ 800e/32\ bit/emOEM.sys", 0x72b80, 42692, $fwfile); + + "$fwfile"; +} + +sub sms1xxx_hcw { + my $url = "http://steventoth.net/linux/sms1xxx/"; + my %files = ( + 'sms1xxx-hcw-55xxx-dvbt-01.fw' => "afb6f9fb9a71d64392e8564ef9577e5a", + 'sms1xxx-hcw-55xxx-dvbt-02.fw' => "b44807098ba26e52cbedeadc052ba58f", + 'sms1xxx-hcw-55xxx-isdbt-02.fw' => "dae934eeea85225acbd63ce6cfe1c9e4", + ); + + checkstandard(); + + my $allfiles; + foreach my $fwfile (keys %files) { + wgetfile($fwfile, "$url/$fwfile"); + verify($fwfile, $files{$fwfile}); + $allfiles .= " $fwfile"; + } + + $allfiles =~ s/^\s//; + + $allfiles; +} + # --------------------------------------------------------------- # Utilities @@ -421,9 +879,29 @@ sub appendfile { close(INFILE); } +sub delzero{ + my ($infile,$outfile) =@_; + + open INFILE,"<$infile"; + open OUTFILE,">$outfile"; + while (1){ + $rcount=sysread(INFILE,$buf,22); + $len=ord(substr($buf,0,1)); + print OUTFILE substr($buf,0,1); + print OUTFILE substr($buf,2,$len+3); + last if ($rcount<1); + printf OUTFILE "%c",0; +#print $len." ".length($buf)."\n"; + + } + close(INFILE); + close(OUTFILE); +} + sub syntax() { print STDERR "syntax: get_dvb_firmware <component>\n"; print STDERR "Supported components:\n"; + @components = sort @components; for($i=0; $i < scalar(@components); $i++) { print STDERR "\t" . $components[$i] . "\n"; } diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt new file mode 100644 index 00000000000..f4b720a1467 --- /dev/null +++ b/Documentation/dvb/lmedm04.txt @@ -0,0 +1,81 @@ +To extract firmware for the DM04/QQBOX you need to copy the +following file(s) to this directory. + +for DM04+/QQBOX LME2510C (Sharp 7395 Tuner) +------------------------------------------- + +The Sharp 7395 driver can be found in windows/system32/drivers + +US2A0D.sys (dated 17 Mar 2009) + + +and run +./get_dvb_firmware lme2510c_s7395 + + will produce + dvb-usb-lme2510c-s7395.fw + +An alternative but older firmware can be found on the driver +disk DVB-S_EN_3.5A in BDADriver/driver + +LMEBDA_DVBS7395C.sys (dated 18 Jan 2008) + +and run +./get_dvb_firmware lme2510c_s7395_old + + will produce + dvb-usb-lme2510c-s7395.fw + +-------------------------------------------------------------------- + +The LG firmware can be found on the driver +disk DM04+_5.1A[LG] in BDADriver/driver + +for DM04 LME2510 (LG Tuner) +--------------------------- + +LMEBDA_DVBS.sys (dated 13 Nov 2007) + +and run +./get_dvb_firmware lme2510_lg + + will produce + dvb-usb-lme2510-lg.fw + + +Other LG firmware can be extracted manually from US280D.sys +only found in windows/system32/drivers + +dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw + +for DM04 LME2510C (LG Tuner) +--------------------------- + +dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw + +--------------------------------------------------------------------- + +The Sharp 0194 tuner driver can be found in windows/system32/drivers + +US290D.sys (dated 09 Apr 2009) + +For LME2510 +dd if=US290D.sys ibs=1 skip=36856 count=3976 of=dvb-usb-lme2510-s0194.fw + + +For LME2510C +dd if=US290D.sys ibs=1 skip=33152 count=3697 of=dvb-usb-lme2510c-s0194.fw + +--------------------------------------------------------------------- + +The m88rs2000 tuner driver can be found in windows/system32/drivers + +US2B0D.sys (dated 29 Jun 2010) + +dd if=US2B0D.sys ibs=1 skip=34432 count=3871 of=dvb-usb-lme2510c-rs2000.fw + +We need to modify id of rs2000 firmware or it will warm boot id 3344:1120. + +echo -ne \\xF0\\x22 | dd conv=notrunc bs=1 count=2 seek=266 of=dvb-usb-lme2510c-rs2000.fw + +Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/dvb/opera-firmware.txt b/Documentation/dvb/opera-firmware.txt new file mode 100644 index 00000000000..fb6683188ef --- /dev/null +++ b/Documentation/dvb/opera-firmware.txt @@ -0,0 +1,27 @@ +To extract the firmware for the Opera DVB-S1 USB-Box +you need to copy the files: + +2830SCap2.sys +2830SLoad2.sys + +from the windriver disk into this directory. + +Then run + +./get_dvb_firmware opera1 + +and after that you have 2 files: + +dvb-usb-opera-01.fw +dvb-usb-opera1-fpga-01.fw + +in here. + +Copy them into /lib/firmware/ . + +After that the driver can load the firmware +(if you have enabled firmware loading +in kernel config and have hotplug running). + + +Marco Gittler <g.marco@freenet.de> diff --git a/Documentation/dvb/readme.txt b/Documentation/dvb/readme.txt index f5c50b22de3..0b0380c9199 100644 --- a/Documentation/dvb/readme.txt +++ b/Documentation/dvb/readme.txt @@ -20,11 +20,23 @@ http://linuxtv.org/downloads/ What's inside this directory: +"avermedia.txt" +contains detailed information about the +Avermedia DVB-T cards. See also "bt8xx.txt". + +"bt8xx.txt" +contains detailed information about the +various bt8xx based "budget" DVB cards. + "cards.txt" contains a list of supported hardware. +"ci.txt" +contains detailed information about the +CI module as part from TwinHan cards and Clones. + "contributors.txt" -is the who-is-who of DVB development +is the who-is-who of DVB development. "faq.txt" contains frequently asked questions and their answers. @@ -34,19 +46,17 @@ script to download and extract firmware for those devices that require it. "ttusb-dec.txt" -contains detailed informations about the +contains detailed information about the TT DEC2000/DEC3000 USB DVB hardware. -"bt8xx.txt" -contains detailed installation instructions for the -various bt8xx based "budget" DVB cards -(Nebula, Pinnacle PCTV, Twinhan DST) - -"README.dibusb" -contains detailed information about adapters -based on DiBcom reference design. - "udev.txt" how to get DVB and udev up and running. +"README.dvb-usb" +contains detailed information about the DVB USB cards. + +"README.flexcop" +contains detailed information about the +Technisat- and Flexcop B2C2 drivers. + Good luck and have fun! diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt new file mode 100644 index 00000000000..f0cc4f2d836 --- /dev/null +++ b/Documentation/dvb/technisat.txt @@ -0,0 +1,78 @@ +How to set up the Technisat/B2C2 Flexcop devices +================================================ + +1) Find out what device you have +================================ + +Important Notice: The driver does NOT support Technisat USB 2 devices! + +First start your linux box with a shipped kernel: +lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: +02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / + Technisat SkyStar2 DVB card (rev 02) + +dmesg | grep frontend may show you for example: +DVB: registering frontend 0 (Conexant CX24123/CX24109)... + +2) Kernel compilation: +====================== + +If the Flexcop / Technisat is the only DVB / TV / Radio device in your box + get rid of unnecessary modules and check this one: +"Multimedia support" => "Customise analog and hybrid tuner modules to build" +In this directory uncheck every driver which is activated there + (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please). + +Then please activate: +2a) Main module part: +"Multimedia support" => "DVB/ATSC adapters" + => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" + +a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or +b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter) + and for troubleshooting purposes: +c.) => "Enable debug for the B2C2 FlexCop drivers" + +2b) Frontend / Tuner / Demodulator module part: +"Multimedia support" => "DVB/ATSC adapters" + => "Customise the frontend modules to build" "Customise DVB frontends" => + +1.) SkyStar DVB-S Revision 2.3: +a.) => "Zarlink VP310/MT312/ZL10313 based" +b.) => "Generic I2C PLL based tuners" + +2.) SkyStar DVB-S Revision 2.6: +a.) => "ST STV0299 based" +b.) => "Generic I2C PLL based tuners" + +3.) SkyStar DVB-S Revision 2.7: +a.) => "Samsung S5H1420 based" +b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" +c.) => "ISL6421 SEC controller" + +4.) SkyStar DVB-S Revision 2.8: +a.) => "Conexant CX24123 based" +b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" +c.) => "ISL6421 SEC controller" + +5.) AirStar DVB-T card: +a.) => "Zarlink MT352 based" +b.) => "Generic I2C PLL based tuners" + +6.) CableStar DVB-C card: +a.) => "ST STV0297 based" +b.) => "Generic I2C PLL based tuners" + +7.) AirStar ATSC card 1st generation: +a.) => "Broadcom BCM3510" + +8.) AirStar ATSC card 2nd generation: +a.) => "NxtWave Communications NXT2002/NXT2004 based" +b.) => "Generic I2C PLL based tuners" + +9.) AirStar ATSC card 3rd generation: +a.) => "LG Electronics LGDT3302/LGDT3303 based" +b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build" + => "Simple tuner support" + +Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009 diff --git a/Documentation/dvb/udev.txt b/Documentation/dvb/udev.txt index 68ee224b6aa..412305b7c55 100644 --- a/Documentation/dvb/udev.txt +++ b/Documentation/dvb/udev.txt @@ -1,7 +1,7 @@ The DVB subsystem currently registers to the sysfs subsystem using the "class_simple" interface. -This means that only the basic informations like module loading parameters +This means that only the basic information like module loading parameters are presented through sysfs. Other things that might be interesting are currently *not* available. |