1 files changed, 67 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
new file mode 100644
index 00000000000..c82f12e2d85
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt
@@ -0,0 +1,67 @@
+* Device tree bindings for Texas Instruments keystone reset
+
+This node is intended to allow SoC reset in case of software reset
+of selected watchdogs.
+
+The Keystone SoCs can contain up to 4 watchdog timers to reset
+SoC. Each watchdog timer event input is connected to the Reset Mux
+block. The Reset Mux block can be configured to cause reset or not.
+
+Additionally soft or hard reset can be configured.
+
+Required properties:
+
+- compatible:		ti,keystone-reset
+
+- ti,syscon-pll:	phandle/offset pair. The phandle to syscon used to
+			access pll controller registers and the offset to use
+			reset control registers.
+
+- ti,syscon-dev:	phandle/offset pair. The phandle to syscon used to
+			access device state control registers and the offset
+			in order to use mux block registers for all watchdogs.
+
+Optional properties:
+
+- ti,soft-reset:	Boolean option indicating soft reset.
+			By default hard reset is used.
+
+- ti,wdt-list:		WDT list that can cause SoC reset. It's not related
+			to WDT driver, it's just needed to enable a SoC related
+			reset that's triggered by one of WDTs. The list is
+			in format: <0>, <2>; It can be in random order and
+			begins from 0 to 3, as keystone can contain up to 4 SoC
+			reset watchdogs and can be in random order.
+
+Example 1:
+Setup keystone reset so that in case software reset or
+WDT0 is triggered it issues hard reset for SoC.
+
+pllctrl: pll-controller@02310000 {
+	compatible = "ti,keystone-pllctrl", "syscon";
+	reg = <0x02310000 0x200>;
+};
+
+devctrl: device-state-control@02620000 {
+	compatible = "ti,keystone-devctrl", "syscon";
+	reg = <0x02620000 0x1000>;
+};
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>;
+};
+
+Example 2:
+Setup keystone reset so that in case of software reset or
+WDT0 or WDT2 is triggered it issues soft reset for SoC.
+
+rstctrl: reset-controller {
+	compatible = "ti,keystone-reset";
+	ti,syscon-pll = <&pllctrl 0xe4>;
+	ti,syscon-dev = <&devctrl 0x328>;
+	ti,wdt-list = <0>, <2>;
+	ti,soft-reset;
+};