diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/phy.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/phy.txt | 16 |
1 files changed, 10 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index 7cd18fbfcf7..5b8c5890307 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -2,7 +2,6 @@ PHY nodes Required properties: - - device_type : Should be "ethernet-phy" - interrupts : <a b> where a is the interrupt number and b is a field that represents an encoding of the sense and level information for the interrupt. This should be encoded based on @@ -11,8 +10,6 @@ Required properties: - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. - reg : The ID number for the phy, usually a small integer - - linux,phandle : phandle for this node; likely referenced by an - ethernet controller node. Optional Properties: @@ -22,14 +19,21 @@ Optional Properties: specifications. If neither of these are specified, the default is to assume clause 22. The compatible list may also contain other elements. +- max-speed: Maximum PHY supported speed (10, 100, 1000...) + + If the phy's identifier is known then the list may contain an entry + of the form: "ethernet-phy-idAAAA.BBBB" where + AAAA - The value of the 16 bit Phy Identifier 1 register as + 4 hex digits. This is the chip vendor OUI bits 3:18 + BBBB - The value of the 16 bit Phy Identifier 2 register as + 4 hex digits. This is the chip vendor OUI bits 19:24, + followed by 10 bits of a vendor specific ID. Example: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - linux,phandle = <2452000>; + compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c22"; interrupt-parent = <40000>; interrupts = <35 1>; reg = <0>; - device_type = "ethernet-phy"; }; |