10 files changed, 618 insertions, 0 deletions
diff --git a/Documentation/EDID/1024x768.S b/Documentation/EDID/1024x768.S
new file mode 100644
index 00000000000..6f3e4b75e49
--- /dev/null
+++ b/Documentation/EDID/1024x768.S
@@ -0,0 +1,44 @@
+/*
+   1024x768.S: EDID data set for standard 1024x768 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 65000 /* kHz */
+#define XPIX 1024
+#define YPIX 768
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 320
+#define YBLANK 38
+#define XOFFSET 8
+#define XPULSE 144
+#define YOFFSET (63+3)
+#define YPULSE (63+6)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux XGA"
+#define ESTABLISHED_TIMING2_BITS 0x08 /* Bit 3 -> 1024x768 @60 Hz */
+#define HSYNC_POL 0
+#define VSYNC_POL 0
+#define CRC 0x55
+
+#include "edid.S"
diff --git a/Documentation/EDID/1280x1024.S b/Documentation/EDID/1280x1024.S
new file mode 100644
index 00000000000..bd9bef2a65a
--- /dev/null
+++ b/Documentation/EDID/1280x1024.S
@@ -0,0 +1,44 @@
+/*
+   1280x1024.S: EDID data set for standard 1280x1024 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 108000 /* kHz */
+#define XPIX 1280
+#define YPIX 1024
+#define XY_RATIO XY_RATIO_5_4
+#define XBLANK 408
+#define YBLANK 42
+#define XOFFSET 48
+#define XPULSE 112
+#define YOFFSET (63+1)
+#define YPULSE (63+3)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux SXGA"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0xa0
+
+#include "edid.S"
diff --git a/Documentation/EDID/1600x1200.S b/Documentation/EDID/1600x1200.S
new file mode 100644
index 00000000000..a45101c6160
--- /dev/null
+++ b/Documentation/EDID/1600x1200.S
@@ -0,0 +1,44 @@
+/*
+   1600x1200.S: EDID data set for standard 1600x1200 60 Hz monitor
+
+   Copyright (C) 2013 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 162000 /* kHz */
+#define XPIX 1600
+#define YPIX 1200
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 560
+#define YBLANK 50
+#define XOFFSET 64
+#define XPULSE 192
+#define YOFFSET (63+1)
+#define YPULSE (63+3)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux UXGA"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0x9d
+
+#include "edid.S"
diff --git a/Documentation/EDID/1680x1050.S b/Documentation/EDID/1680x1050.S
new file mode 100644
index 00000000000..b0d7c69282b
--- /dev/null
+++ b/Documentation/EDID/1680x1050.S
@@ -0,0 +1,44 @@
+/*
+   1680x1050.S: EDID data set for standard 1680x1050 60 Hz monitor
+
+   Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 146250 /* kHz */
+#define XPIX 1680
+#define YPIX 1050
+#define XY_RATIO XY_RATIO_16_10
+#define XBLANK 560
+#define YBLANK 39
+#define XOFFSET 104
+#define XPULSE 176
+#define YOFFSET (63+3)
+#define YPULSE (63+6)
+#define DPI 96
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux WSXGA"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0x26
+
+#include "edid.S"
diff --git a/Documentation/EDID/1920x1080.S b/Documentation/EDID/1920x1080.S
new file mode 100644
index 00000000000..3084355e81e
--- /dev/null
+++ b/Documentation/EDID/1920x1080.S
@@ -0,0 +1,44 @@
+/*
+   1920x1080.S: EDID data set for standard 1920x1080 60 Hz monitor
+
+   Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 148500 /* kHz */
+#define XPIX 1920
+#define YPIX 1080
+#define XY_RATIO XY_RATIO_16_9
+#define XBLANK 280
+#define YBLANK 45
+#define XOFFSET 88
+#define XPULSE 44
+#define YOFFSET (63+4)
+#define YPULSE (63+5)
+#define DPI 96
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux FHD"
+/* No ESTABLISHED_TIMINGx_BITS */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0x05
+
+#include "edid.S"
diff --git a/Documentation/EDID/800x600.S b/Documentation/EDID/800x600.S
new file mode 100644
index 00000000000..6644e26d580
--- /dev/null
+++ b/Documentation/EDID/800x600.S
@@ -0,0 +1,41 @@
+/*
+   800x600.S: EDID data set for standard 800x600 60 Hz monitor
+
+   Copyright (C) 2011 Carsten Emde <C.Emde@osadl.org>
+   Copyright (C) 2014 Linaro Limited
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+*/
+
+/* EDID */
+#define VERSION 1
+#define REVISION 3
+
+/* Display */
+#define CLOCK 40000 /* kHz */
+#define XPIX 800
+#define YPIX 600
+#define XY_RATIO XY_RATIO_4_3
+#define XBLANK 256
+#define YBLANK 28
+#define XOFFSET 40
+#define XPULSE 128
+#define YOFFSET (63+1)
+#define YPULSE (63+4)
+#define DPI 72
+#define VFREQ 60 /* Hz */
+#define TIMING_NAME "Linux SVGA"
+#define ESTABLISHED_TIMING1_BITS 0x01 /* Bit 0: 800x600 @ 60Hz */
+#define HSYNC_POL 1
+#define VSYNC_POL 1
+#define CRC 0xc2
+
+#include "edid.S"
diff --git a/Documentation/EDID/HOWTO.txt b/Documentation/EDID/HOWTO.txt
new file mode 100644
index 00000000000..835db332289
--- /dev/null
+++ b/Documentation/EDID/HOWTO.txt
@@ -0,0 +1,58 @@
+In the good old days when graphics parameters were configured explicitly
+in a file called xorg.conf, even broken hardware could be managed.
+
+Today, with the advent of Kernel Mode Setting, a graphics board is
+either correctly working because all components follow the standards -
+or the computer is unusable, because the screen remains dark after
+booting or it displays the wrong area. Cases when this happens are:
+- The graphics board does not recognize the monitor.
+- The graphics board is unable to detect any EDID data.
+- The graphics board incorrectly forwards EDID data to the driver.
+- The monitor sends no or bogus EDID data.
+- A KVM sends its own EDID data instead of querying the connected monitor.
+Adding the kernel parameter "nomodeset" helps in most cases, but causes
+restrictions later on.
+
+As a remedy for such situations, the kernel configuration item
+CONFIG_DRM_LOAD_EDID_FIRMWARE was introduced. It allows to provide an
+individually prepared or corrected EDID data set in the /lib/firmware
+directory from where it is loaded via the firmware interface. The code
+(see drivers/gpu/drm/drm_edid_load.c) contains built-in data sets for
+commonly used screen resolutions (800x600, 1024x768, 1280x1024, 1600x1200,
+1680x1050, 1920x1080) as binary blobs, but the kernel source tree does
+not contain code to create these data. In order to elucidate the origin
+of the built-in binary EDID blobs and to facilitate the creation of
+individual data for a specific misbehaving monitor, commented sources
+and a Makefile environment are given here.
+
+To create binary EDID and C source code files from the existing data
+material, simply type "make".
+
+If you want to create your own EDID file, copy the file 1024x768.S,
+replace the settings with your own data and add a new target to the
+Makefile. Please note that the EDID data structure expects the timing
+values in a different way as compared to the standard X11 format.
+
+X11:
+HTimings:  hdisp hsyncstart hsyncend htotal
+VTimings:  vdisp vsyncstart vsyncend vtotal
+
+EDID:
+#define XPIX hdisp
+#define XBLANK htotal-hdisp
+#define XOFFSET hsyncstart-hdisp
+#define XPULSE hsyncend-hsyncstart
+
+#define YPIX vdisp
+#define YBLANK vtotal-vdisp
+#define YOFFSET (63+(vsyncstart-vdisp))
+#define YPULSE (63+(vsyncend-vsyncstart))
+
+The CRC value in the last line
+  #define CRC 0x55
+also is a bit tricky. After a first version of the binary data set is
+created, it must be checked with the "edid-decode" utility which will
+most probably complain about a wrong CRC. Fortunately, the utility also
+displays the correct CRC which must then be inserted into the source
+file. After the make procedure is repeated, the EDID data set is ready
+to be used.
diff --git a/Documentation/EDID/Makefile b/Documentation/EDID/Makefile
new file mode 100644
index 00000000000..17763ca3f12
--- /dev/null
+++ b/Documentation/EDID/Makefile
@@ -0,0 +1,26 @@
+
+SOURCES	:= $(wildcard [0-9]*x[0-9]*.S)
+
+BIN	:= $(patsubst %.S, %.bin, $(SOURCES))
+
+IHEX	:= $(patsubst %.S, %.bin.ihex, $(SOURCES))
+
+CODE	:= $(patsubst %.S, %.c, $(SOURCES))
+
+all:	$(BIN) $(IHEX) $(CODE)
+
+clean:
+	@rm -f *.o *.bin.ihex *.bin *.c
+
+%.o:	%.S
+	@cc -c $^
+
+%.bin:	%.o
+	@objcopy -Obinary $^ $@
+
+%.bin.ihex:	%.o
+	@objcopy -Oihex $^ $@
+	@dos2unix $@ 2>/dev/null
+
+%.c:	%.bin
+	@echo "{" >$@; hexdump -f hex $^ >>$@; echo "};" >>$@
diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S
new file mode 100644
index 00000000000..7ac03276d7a
--- /dev/null
+++ b/Documentation/EDID/edid.S
@@ -0,0 +1,272 @@
+/*
+   edid.S: EDID data template
+
+   Copyright (C) 2012 Carsten Emde <C.Emde@osadl.org>
+
+   This program is free software; you can redistribute it and/or
+   modify it under the terms of the GNU General Public License
+   as published by the Free Software Foundation; either version 2
+   of the License, or (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA.
+*/
+
+
+/* Manufacturer */
+#define MFG_LNX1 'L'
+#define MFG_LNX2 'N'
+#define MFG_LNX3 'X'
+#define SERIAL 0
+#define YEAR 2012
+#define WEEK 5
+
+/* EDID 1.3 standard definitions */
+#define XY_RATIO_16_10	0b00
+#define XY_RATIO_4_3	0b01
+#define XY_RATIO_5_4	0b10
+#define XY_RATIO_16_9	0b11
+
+/* Provide defaults for the timing bits */
+#ifndef ESTABLISHED_TIMING1_BITS
+#define ESTABLISHED_TIMING1_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING2_BITS
+#define ESTABLISHED_TIMING2_BITS 0x00
+#endif
+#ifndef ESTABLISHED_TIMING3_BITS
+#define ESTABLISHED_TIMING3_BITS 0x00
+#endif
+
+#define mfgname2id(v1,v2,v3) \
+	((((v1-'@')&0x1f)<<10)+(((v2-'@')&0x1f)<<5)+((v3-'@')&0x1f))
+#define swap16(v1) ((v1>>8)+((v1&0xff)<<8))
+#define msbs2(v1,v2) ((((v1>>8)&0x0f)<<4)+((v2>>8)&0x0f))
+#define msbs4(v1,v2,v3,v4) \
+	(((v1&0x03)>>2)+((v2&0x03)>>4)+((v3&0x03)>>6)+((v4&0x03)>>8))
+#define pixdpi2mm(pix,dpi) ((pix*25)/dpi)
+#define xsize pixdpi2mm(XPIX,DPI)
+#define ysize pixdpi2mm(YPIX,DPI)
+
+		.data
+
+/* Fixed header pattern */
+header:		.byte	0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00
+
+mfg_id:		.word	swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))
+
+prod_code:	.word	0
+
+/* Serial number. 32 bits, little endian. */
+serial_number:	.long	SERIAL
+
+/* Week of manufacture */
+week:		.byte	WEEK
+
+/* Year of manufacture, less 1990. (1990-2245)
+   If week=255, it is the model year instead */
+year:		.byte	YEAR-1990
+
+version:	.byte	VERSION 	/* EDID version, usually 1 (for 1.3) */
+revision:	.byte	REVISION	/* EDID revision, usually 3 (for 1.3) */
+
+/* If Bit 7=1	Digital input. If set, the following bit definitions apply:
+     Bits 6-1	Reserved, must be 0
+     Bit 0	Signal is compatible with VESA DFP 1.x TMDS CRGB,
+		  1 pixel per clock, up to 8 bits per color, MSB aligned,
+   If Bit 7=0	Analog input. If clear, the following bit definitions apply:
+     Bits 6-5	Video white and sync levels, relative to blank
+		  00=+0.7/-0.3 V; 01=+0.714/-0.286 V;
+		  10=+1.0/-0.4 V; 11=+0.7/0 V
+   Bit 4	Blank-to-black setup (pedestal) expected
+   Bit 3	Separate sync supported
+   Bit 2	Composite sync (on HSync) supported
+   Bit 1	Sync on green supported
+   Bit 0	VSync pulse must be serrated when somposite or
+		  sync-on-green is used. */
+video_parms:	.byte	0x6d
+
+/* Maximum horizontal image size, in centimetres
+   (max 292 cm/115 in at 16:9 aspect ratio) */
+max_hor_size:	.byte	xsize/10
+
+/* Maximum vertical image size, in centimetres.
+   If either byte is 0, undefined (e.g. projector) */
+max_vert_size:	.byte	ysize/10
+
+/* Display gamma, minus 1, times 100 (range 1.00-3.5 */
+gamma:		.byte	120
+
+/* Bit 7	DPMS standby supported
+   Bit 6	DPMS suspend supported
+   Bit 5	DPMS active-off supported
+   Bits 4-3	Display type: 00=monochrome; 01=RGB colour;
+		  10=non-RGB multicolour; 11=undefined
+   Bit 2	Standard sRGB colour space. Bytes 25-34 must contain
+		  sRGB standard values.
+   Bit 1	Preferred timing mode specified in descriptor block 1.
+   Bit 0	GTF supported with default parameter values. */
+dsp_features:	.byte	0xea
+
+/* Chromaticity coordinates. */
+/* Red and green least-significant bits
+   Bits 7-6	Red x value least-significant 2 bits
+   Bits 5-4	Red y value least-significant 2 bits
+   Bits 3-2	Green x value lst-significant 2 bits
+   Bits 1-0	Green y value least-significant 2 bits */
+red_green_lsb:	.byte	0x5e
+
+/* Blue and white least-significant 2 bits */
+blue_white_lsb:	.byte	0xc0
+
+/* Red x value most significant 8 bits.
+   0-255 encodes 0-0.996 (255/256); 0-0.999 (1023/1024) with lsbits */
+red_x_msb:	.byte	0xa4
+
+/* Red y value most significant 8 bits */
+red_y_msb:	.byte	0x59
+
+/* Green x and y value most significant 8 bits */
+green_x_y_msb:	.byte	0x4a,0x98
+
+/* Blue x and y value most significant 8 bits */
+blue_x_y_msb:	.byte	0x25,0x20
+
+/* Default white point x and y value most significant 8 bits */
+white_x_y_msb:	.byte	0x50,0x54
+
+/* Established timings */
+/* Bit 7	720x400 @ 70 Hz
+   Bit 6	720x400 @ 88 Hz
+   Bit 5	640x480 @ 60 Hz
+   Bit 4	640x480 @ 67 Hz
+   Bit 3	640x480 @ 72 Hz
+   Bit 2	640x480 @ 75 Hz
+   Bit 1	800x600 @ 56 Hz
+   Bit 0	800x600 @ 60 Hz */
+estbl_timing1:	.byte	ESTABLISHED_TIMING1_BITS
+
+/* Bit 7	800x600 @ 72 Hz
+   Bit 6	800x600 @ 75 Hz
+   Bit 5	832x624 @ 75 Hz
+   Bit 4	1024x768 @ 87 Hz, interlaced (1024x768)
+   Bit 3	1024x768 @ 60 Hz
+   Bit 2	1024x768 @ 72 Hz
+   Bit 1	1024x768 @ 75 Hz
+   Bit 0	1280x1024 @ 75 Hz */
+estbl_timing2:	.byte	ESTABLISHED_TIMING2_BITS
+
+/* Bit 7	1152x870 @ 75 Hz (Apple Macintosh II)
+   Bits 6-0 	Other manufacturer-specific display mod */
+estbl_timing3:	.byte	ESTABLISHED_TIMING3_BITS
+
+/* Standard timing */
+/* X resolution, less 31, divided by 8 (256-2288 pixels) */
+std_xres:	.byte	(XPIX/8)-31
+/* Y resolution, X:Y pixel ratio
+   Bits 7-6	X:Y pixel ratio: 00=16:10; 01=4:3; 10=5:4; 11=16:9.
+   Bits 5-0	Vertical frequency, less 60 (60-123 Hz) */
+std_vres:	.byte	(XY_RATIO<<6)+VFREQ-60
+		.fill	7,2,0x0101	/* Unused */
+
+descriptor1:
+/* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
+clock:		.word	CLOCK/10
+
+/* Horizontal active pixels 8 lsbits (0-4095) */
+x_act_lsb:	.byte	XPIX&0xff
+/* Horizontal blanking pixels 8 lsbits (0-4095)
+   End of active to start of next active. */
+x_blk_lsb:	.byte	XBLANK&0xff
+/* Bits 7-4 	Horizontal active pixels 4 msbits
+   Bits 3-0	Horizontal blanking pixels 4 msbits */
+x_msbs:		.byte	msbs2(XPIX,XBLANK)
+
+/* Vertical active lines 8 lsbits (0-4095) */
+y_act_lsb:	.byte	YPIX&0xff
+/* Vertical blanking lines 8 lsbits (0-4095) */
+y_blk_lsb:	.byte	YBLANK&0xff
+/* Bits 7-4 	Vertical active lines 4 msbits
+   Bits 3-0 	Vertical blanking lines 4 msbits */
+y_msbs:		.byte	msbs2(YPIX,YBLANK)
+
+/* Horizontal sync offset pixels 8 lsbits (0-1023) From blanking start */
+x_snc_off_lsb:	.byte	XOFFSET&0xff
+/* Horizontal sync pulse width pixels 8 lsbits (0-1023) */
+x_snc_pls_lsb:	.byte	XPULSE&0xff
+/* Bits 7-4 	Vertical sync offset lines 4 lsbits -63)
+   Bits 3-0 	Vertical sync pulse width lines 4 lsbits -63) */
+y_snc_lsb:	.byte	((YOFFSET-63)<<4)+(YPULSE-63)
+/* Bits 7-6 	Horizontal sync offset pixels 2 msbits
+   Bits 5-4 	Horizontal sync pulse width pixels 2 msbits
+   Bits 3-2 	Vertical sync offset lines 2 msbits
+   Bits 1-0 	Vertical sync pulse width lines 2 msbits */
+xy_snc_msbs:	.byte	msbs4(XOFFSET,XPULSE,YOFFSET,YPULSE)
+
+/* Horizontal display size, mm, 8 lsbits (0-4095 mm, 161 in) */
+x_dsp_size:	.byte	xsize&0xff
+
+/* Vertical display size, mm, 8 lsbits (0-4095 mm, 161 in) */
+y_dsp_size:	.byte	ysize&0xff
+
+/* Bits 7-4 	Horizontal display size, mm, 4 msbits
+   Bits 3-0 	Vertical display size, mm, 4 msbits */
+dsp_size_mbsb:	.byte	msbs2(xsize,ysize)
+
+/* Horizontal border pixels (each side; total is twice this) */
+x_border:	.byte	0
+/* Vertical border lines (each side; total is twice this) */
+y_border:	.byte	0
+
+/* Bit 7 	Interlaced
+   Bits 6-5 	Stereo mode: 00=No stereo; other values depend on bit 0:
+   Bit 0=0: 01=Field sequential, sync=1 during right; 10=similar,
+     sync=1 during left; 11=4-way interleaved stereo
+   Bit 0=1 2-way interleaved stereo: 01=Right image on even lines;
+     10=Left image on even lines; 11=side-by-side
+   Bits 4-3 	Sync type: 00=Analog composite; 01=Bipolar analog composite;
+     10=Digital composite (on HSync); 11=Digital separate
+   Bit 2 	If digital separate: Vertical sync polarity (1=positive)
+   Other types: VSync serrated (HSync during VSync)
+   Bit 1 	If analog sync: Sync on all 3 RGB lines (else green only)
+   Digital: HSync polarity (1=positive)
+   Bit 0 	2-way line-interleaved stereo, if bits 4-3 are not 00. */
+features:	.byte	0x18+(VSYNC_POL<<2)+(HSYNC_POL<<1)
+
+descriptor2:	.byte	0,0	/* Not a detailed timing descriptor */
+		.byte	0	/* Must be zero */
+		.byte	0xff	/* Descriptor is monitor serial number (text) */
+		.byte	0	/* Must be zero */
+start1:		.ascii	"Linux #0"
+end1:		.byte	0x0a	/* End marker */
+		.fill	12-(end1-start1), 1, 0x20 /* Padded spaces */
+descriptor3:	.byte	0,0	/* Not a detailed timing descriptor */
+		.byte	0	/* Must be zero */
+		.byte	0xfd	/* Descriptor is monitor range limits */
+		.byte	0	/* Must be zero */
+start2:		.byte	VFREQ-1	/* Minimum vertical field rate (1-255 Hz) */
+		.byte	VFREQ+1	/* Maximum vertical field rate (1-255 Hz) */
+		.byte	(CLOCK/(XPIX+XBLANK))-1 /* Minimum horizontal line rate
+						    (1-255 kHz) */
+		.byte	(CLOCK/(XPIX+XBLANK))+1 /* Maximum horizontal line rate
+						    (1-255 kHz) */
+		.byte	(CLOCK/10000)+1	/* Maximum pixel clock rate, rounded up
+					   to 10 MHz multiple (10-2550 MHz) */
+		.byte	0	/* No extended timing information type */
+end2:		.byte	0x0a	/* End marker */
+		.fill	12-(end2-start2), 1, 0x20 /* Padded spaces */
+descriptor4:	.byte	0,0	/* Not a detailed timing descriptor */
+		.byte	0	/* Must be zero */
+		.byte	0xfc	/* Descriptor is text */
+		.byte	0	/* Must be zero */
+start3:		.ascii	TIMING_NAME
+end3:		.byte	0x0a	/* End marker */
+		.fill	12-(end3-start3), 1, 0x20 /* Padded spaces */
+extensions:	.byte	0	/* Number of extensions to follow */
+checksum:	.byte	CRC	/* Sum of all bytes must be 0 */
diff --git a/Documentation/EDID/hex b/Documentation/EDID/hex
new file mode 100644
index 00000000000..8873ebb618a
--- /dev/null
+++ b/Documentation/EDID/hex
@@ -0,0 +1 @@
+"\t" 8/1 "0x%02x, " "\n"