diff options
| -rw-r--r-- | arch/mips/cavium-octeon/octeon-irq.c | 4 | ||||
| -rw-r--r-- | arch/mips/cavium-octeon/serial.c | 134 |
2 files changed, 53 insertions, 85 deletions
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 5fb76aa346b..7fb1f222b8a 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -1184,9 +1184,6 @@ static void __init octeon_irq_init_ciu(void) octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART0, 0, 34, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART1, 0, 35, chip, handle_level_irq); - for (i = 0; i < 4; i++) octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); for (i = 0; i < 4; i++) @@ -1203,7 +1200,6 @@ static void __init octeon_irq_init_ciu(void) for (i = 0; i < 16; i++) octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_UART2, 1, 16, chip, handle_level_irq); octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c index 057f0ae88c9..138b2216b4f 100644 --- a/arch/mips/cavium-octeon/serial.c +++ b/arch/mips/cavium-octeon/serial.c @@ -43,95 +43,67 @@ void octeon_serial_out(struct uart_port *up, int offset, int value) cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value); } -/* - * Allocated in .bss, so it is all zeroed. - */ -#define OCTEON_MAX_UARTS 3 -static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1]; -static struct platform_device octeon_uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = octeon_uart8250_data, - }, -}; - -static void __init octeon_uart_set_common(struct plat_serial8250_port *p) +static int __devinit octeon_serial_probe(struct platform_device *pdev) { - p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; - p->type = PORT_OCTEON; - p->iotype = UPIO_MEM; - p->regshift = 3; /* I/O addresses are every 8 bytes */ + int irq, res; + struct resource *res_mem; + struct uart_port port; + + /* All adaptors have an irq. */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + memset(&port, 0, sizeof(port)); + + port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE; + port.type = PORT_OCTEON; + port.iotype = UPIO_MEM; + port.regshift = 3; + port.dev = &pdev->dev; + if (octeon_is_simulation()) /* Make simulator output fast*/ - p->uartclk = 115200 * 16; + port.uartclk = 115200 * 16; else - p->uartclk = octeon_get_io_clock_rate(); - p->serial_in = octeon_serial_in; - p->serial_out = octeon_serial_out; -} + port.uartclk = octeon_get_io_clock_rate(); -static int __init octeon_serial_init(void) -{ - int enable_uart0; - int enable_uart1; - int enable_uart2; - struct plat_serial8250_port *p; - -#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL - /* - * If we are configured to run as the second of two kernels, - * disable uart0 and enable uart1. Uart0 is owned by the first - * kernel - */ - enable_uart0 = 0; - enable_uart1 = 1; -#else - /* - * We are configured for the first kernel. We'll enable uart0 - * if the bootloader told us to use 0, otherwise will enable - * uart 1. - */ - enable_uart0 = (octeon_get_boot_uart() == 0); - enable_uart1 = (octeon_get_boot_uart() == 1); -#ifdef CONFIG_KGDB - enable_uart1 = 1; -#endif -#endif - - /* Right now CN52XX is the only chip with a third uart */ - enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX); - - p = octeon_uart8250_data; - if (enable_uart0) { - /* Add a ttyS device for hardware uart 0 */ - octeon_uart_set_common(p); - p->membase = (void *) CVMX_MIO_UARTX_RBR(0); - p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1); - p->irq = OCTEON_IRQ_UART0; - p++; - } + port.serial_in = octeon_serial_in; + port.serial_out = octeon_serial_out; + port.irq = irq; - if (enable_uart1) { - /* Add a ttyS device for hardware uart 1 */ - octeon_uart_set_common(p); - p->membase = (void *) CVMX_MIO_UARTX_RBR(1); - p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1); - p->irq = OCTEON_IRQ_UART1; - p++; - } - if (enable_uart2) { - /* Add a ttyS device for hardware uart 2 */ - octeon_uart_set_common(p); - p->membase = (void *) CVMX_MIO_UART2_RBR; - p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1); - p->irq = OCTEON_IRQ_UART2; - p++; + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res_mem == NULL) { + dev_err(&pdev->dev, "found no memory resource\n"); + return -ENXIO; } + port.mapbase = res_mem->start; + port.membase = ioremap(res_mem->start, resource_size(res_mem)); - BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]); + res = serial8250_register_port(&port); - return platform_device_register(&octeon_uart8250_device); + return res >= 0 ? 0 : res; } -device_initcall(octeon_serial_init); +static struct of_device_id octeon_serial_match[] = { + { + .compatible = "cavium,octeon-3860-uart", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, octeon_serial_match); + +static struct platform_driver octeon_serial_driver = { + .probe = octeon_serial_probe, + .driver = { + .owner = THIS_MODULE, + .name = "octeon_serial", + .of_match_table = octeon_serial_match, + }, +}; + +static int __init octeon_serial_init(void) +{ + return platform_driver_register(&octeon_serial_driver); +} +late_initcall(octeon_serial_init); |