diff options
132 files changed, 956 insertions, 658 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index cf2ac2961fc..2919a2e9193 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -294,7 +294,9 @@ and is between 256 and 4096 characters. It is defined in the file Possible values are: isolate - enable device isolation (each device, as far as possible, will get its own protection - domain) + domain) [default] + share - put every device behind one IOMMU into the + same protection domain fullflush - enable flushing of IO/TLB entries when they are unmapped. Otherwise they are flushed before they will be reused, which @@ -1201,8 +1203,8 @@ and is between 256 and 4096 characters. It is defined in the file it is equivalent to "nosmp", which also disables the IO APIC. - max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or - equal to this physical address is ignored. + max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater than + or equal to this physical address is ignored. max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. @@ -1302,6 +1304,9 @@ and is between 256 and 4096 characters. It is defined in the file mga= [HW,DRM] + min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this + physical address is ignored. + mminit_loglevel= [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this parameter allows control of the logging verbosity for diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 8df6a7b0e66..88bb71b46da 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -96,7 +96,7 @@ Letting the PHY Abstraction Layer do Everything static void adjust_link(struct net_device *dev); Next, you need to know the device name of the PHY connected to this device. - The name will look something like, "phy0:0", where the first number is the + The name will look something like, "0:00", where the first number is the bus id, and the second is the PHY's address on that bus. Typically, the bus is responsible for making its ID unique. diff --git a/MAINTAINERS b/MAINTAINERS index 627e4c89328..618c1ef4a39 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1809,7 +1809,7 @@ S: Maintained FTRACE P: Steven Rostedt -M: srostedt@redhat.com +M: rostedt@goodmis.org S: Maintained FUJITSU FR-V (FRV) PORT @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 28 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Killer Bat of Doom # *DOCUMENTATION* diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 8e591118371..cbda4d35c42 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -33,6 +33,7 @@ #define LCD_CONN_TYPE(_x) ((_x) & 0x0f) #define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) +#define LCD_TYPE_MASK 0xf #define LCD_TYPE_UNKNOWN 0 #define LCD_TYPE_MONO_STN 1 #define LCD_TYPE_MONO_DSTN 2 diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index 1b2af575c40..00b2dc2a107 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -90,12 +90,13 @@ void arch_reset(char mode) /* Jump into ROM at address 0 */ cpu_reset(0); break; - case 'h': - do_hw_reset(); - break; case 'g': do_gpio_reset(); break; + case 'h': + default: + do_hw_reset(); + break; } } diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index f0a5bbae0b4..3be76ee2bdb 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -67,6 +67,7 @@ static unsigned long spitz_pin_config[] __initdata = { /* Chip Selects */ GPIO78_nCS_2, /* SCOOP #2 */ + GPIO79_nCS_3, /* NAND */ GPIO80_nCS_4, /* SCOOP #1 */ /* LCD - 16bpp Active TFT */ @@ -97,10 +98,10 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO51_nPIOW, GPIO85_nPCE_1, GPIO54_nPCE_2, - GPIO79_PSKTSEL, GPIO55_ |