diff options
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9002_hw.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ar9002_initvals.h | 14 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/hw.c | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/hw.h | 9 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/init.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/main.c | 34 | ||||
-rw-r--r-- | drivers/net/wireless/ath/ath9k/wow.c | 168 |
7 files changed, 35 insertions, 207 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 830daa12feb..8dc2d089cde 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -38,10 +38,6 @@ static int ar9002_hw_init_mode_regs(struct ath_hw *ah) else INIT_INI_ARRAY(&ah->iniPcieSerdes, ar9280PciePhy_clkreq_always_on_L1_9280); -#ifdef CONFIG_PM_SLEEP - INIT_INI_ARRAY(&ah->iniPcieSerdesWow, - ar9280PciePhy_awow); -#endif if (AR_SREV_9287_11_OR_LATER(ah)) { INIT_INI_ARRAY(&ah->iniModes, ar9287Modes_9287_1_1); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_initvals.h b/drivers/net/wireless/ath/ath9k/ar9002_initvals.h index beb6162cf97..4d18c66a679 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9002_initvals.h @@ -925,20 +925,6 @@ static const u32 ar9280PciePhy_clkreq_always_on_L1_9280[][2] = { {0x00004044, 0x00000000}, }; -static const u32 ar9280PciePhy_awow[][2] = { - /* Addr allmodes */ - {0x00004040, 0x9248fd00}, - {0x00004040, 0x24924924}, - {0x00004040, 0xa8000019}, - {0x00004040, 0x13160820}, - {0x00004040, 0xe5980560}, - {0x00004040, 0xc01dcffd}, - {0x00004040, 0x1aaabe41}, - {0x00004040, 0xbe105554}, - {0x00004040, 0x00043007}, - {0x00004044, 0x00000000}, -}; - static const u32 ar9285Modes_9285_1_2[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160}, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index a263ccc00a4..6587d0503a6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2595,13 +2595,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->hw_caps |= ATH9K_HW_CAP_RTT; } - if (AR_SREV_9280_20_OR_LATER(ah)) { - pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE | - ATH9K_HW_WOW_PATTERN_MATCH_EXACT; - - if (AR_SREV_9280(ah)) - pCap->hw_caps |= ATH9K_HW_WOW_PATTERN_MATCH_DWORD; - } + if (AR_SREV_9462(ah)) + pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE; if (AR_SREV_9300_20_OR_LATER(ah) && ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index ae3034374bc..e3c39971632 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -246,9 +246,7 @@ enum ath9k_hw_caps { ATH9K_HW_CAP_MCI = BIT(15), ATH9K_HW_CAP_DFS = BIT(16), ATH9K_HW_WOW_DEVICE_CAPABLE = BIT(17), - ATH9K_HW_WOW_PATTERN_MATCH_EXACT = BIT(18), - ATH9K_HW_WOW_PATTERN_MATCH_DWORD = BIT(19), - ATH9K_HW_CAP_PAPRD = BIT(20), + ATH9K_HW_CAP_PAPRD = BIT(18), }; /* @@ -882,9 +880,6 @@ struct ath_hw { struct ar5416IniArray iniBank6; struct ar5416IniArray iniAddac; struct ar5416IniArray iniPcieSerdes; -#ifdef CONFIG_PM_SLEEP - struct ar5416IniArray iniPcieSerdesWow; -#endif struct ar5416IniArray iniPcieSerdesLowPower; struct ar5416IniArray iniModesFastClock; struct ar5416IniArray iniAdditional; @@ -1165,8 +1160,6 @@ static inline void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) } #endif - - #define ATH9K_CLOCK_RATE_CCK 22 #define ATH9K_CLOCK_RATE_5GHZ_OFDM 40 #define ATH9K_CLOCK_RATE_2GHZ_OFDM 44 diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index db483b473a4..979bde3b8f9 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -800,21 +800,17 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; #ifdef CONFIG_PM_SLEEP - if ((ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) && device_can_wakeup(sc->dev)) { - hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT; hw->wiphy->wowlan.n_patterns = MAX_NUM_USER_PATTERN; hw->wiphy->wowlan.pattern_min_len = 1; hw->wiphy->wowlan.pattern_max_len = MAX_PATTERN_SIZE; - } atomic_set(&sc->wow_sleep_proc_intr, -1); atomic_set(&sc->wow_got_bmiss_intr, -1); - #endif hw->queues = 4; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index a1630d1ee3c..cc5a98b8d18 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2003,7 +2003,6 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); - struct ath9k_hw_capabilities *pcaps = &ah->caps; int pattern_count = 0; int i, byte_cnt; u8 dis_deauth_pattern[MAX_PATTERN_SIZE]; @@ -2073,36 +2072,9 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc) /* Create Disassociate pattern mask */ - if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_EXACT) { - - if (pcaps->hw_caps & ATH9K_HW_WOW_PATTERN_MATCH_DWORD) { - /* - * for AR9280, because of hardware limitation, the - * first 4 bytes have to be matched for all patterns. - * the mask for disassociation and de-auth pattern - * matching need to enable the first 4 bytes. - * also the duration field needs to be filled. - */ - dis_deauth_mask[0] = 0xf0; - - /* - * fill in duration field - FIXME: what is the exact value ? - */ - dis_deauth_pattern[2] = 0xff; - dis_deauth_pattern[3] = 0xff; - } else { - dis_deauth_mask[0] = 0xfe; - } - - dis_deauth_mask[1] = 0x03; - dis_deauth_mask[2] = 0xc0; - } else { - dis_deauth_mask[0] = 0xef; - dis_deauth_mask[1] = 0x3f; - dis_deauth_mask[2] = 0x00; - dis_deauth_mask[3] = 0xfc; - } + dis_deauth_mask[0] = 0xfe; + dis_deauth_mask[1] = 0x03; + dis_deauth_mask[2] = 0xc0; ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n"); diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c index 9f8563091be..81c88dd606d 100644 --- a/drivers/net/wireless/ath/ath9k/wow.c +++ b/drivers/net/wireless/ath/ath9k/wow.c @@ -34,17 +34,6 @@ const char *ath9k_hw_wow_event_to_string(u32 wow_event) } EXPORT_SYMBOL(ath9k_hw_wow_event_to_string); -static void ath9k_hw_config_serdes_wow_sleep(struct ath_hw *ah) -{ - int i; - - for (i = 0; i < ah->iniPcieSerdesWow.ia_rows; i++) - REG_WRITE(ah, INI_RA(&ah->iniPcieSerdesWow, i, 0), - INI_RA(&ah->iniPcieSerdesWow, i, 1)); - - usleep_range(1000, 1500); -} - static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); @@ -58,15 +47,8 @@ static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah) ath_err(common, "Failed to stop Rx DMA in 10ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n", REG_READ(ah, AR_CR), REG_READ(ah, AR_DIAG_SW)); return; - } else { - if (!AR_SREV_9300_20_OR_LATER(ah)) - REG_WRITE(ah, AR_RXDP, 0x0); } - /* AR9280 WoW has sleep issue, do not set it to sleep */ - if (AR_SREV_9280_20(ah)) - return; - REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT); } @@ -84,27 +66,16 @@ static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah) /* set the transmit buffer */ ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16)); - - if (!(AR_SREV_9300_20_OR_LATER(ah))) - ctl[0] += (KAL_ANTENNA_MODE << 25); - ctl[1] = 0; ctl[3] = 0xb; /* OFDM_6M hardware value for this rate */ ctl[4] = 0; ctl[7] = (ah->txchainmask) << 2; - - if (AR_SREV_9300_20_OR_LATER(ah)) - ctl[2] = 0xf << 16; /* tx_tries 0 */ - else - ctl[2] = 0x7 << 16; /* tx_tries 0 */ - + ctl[2] = 0xf << 16; /* tx_tries 0 */ for (i = 0; i < KAL_NUM_DESC_WORDS; i++) REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]); - /* for AR9300 family 13 descriptor words */ - if (AR_SREV_9300_20_OR_LATER(ah)) - REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]); + REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]); data_word[0] = (KAL_FRAME_TYPE << 2) | (KAL_FRAME_SUB_TYPE << 4) | (KAL_TO_DS << 8) | (KAL_DURATION_ID << 16); @@ -183,9 +154,6 @@ void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern, ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT); - if (!AR_SREV_9285_12_OR_LATER(ah)) - return; - if (pattern_count < 4) { /* Pattern 0-3 uses AR_WOW_LENGTH1 register */ set = (pattern_len & AR_WOW_LENGTH_MAX) << @@ -207,6 +175,7 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah) { u32 wow_status = 0; u32 val = 0, rval; + /* * read the WoW status register to know * the wakeup reason @@ -223,19 +192,14 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah) val &= ah->wow_event_mask; if (val) { - if (val & AR_WOW_MAGIC_PAT_FOUND) wow_status |= AH_WOW_MAGIC_PATTERN_EN; - if (AR_WOW_PATTERN_FOUND(val)) wow_status |= AH_WOW_USER_PATTERN_EN; - if (val & AR_WOW_KEEP_ALIVE_FAIL) wow_status |= AH_WOW_LINK_CHANGE; - if (val & AR_WOW_BEACON_FAIL) wow_status |= AH_WOW_BEACON_MISS; - } /* @@ -255,17 +219,6 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah) AR_WOW_CLEAR_EVENTS(REG_READ(ah, AR_WOW_PATTERN))); /* - * tie reset register for AR9002 family of chipsets - * NB: not tieing it back might have some repurcussions. - */ - - if (!AR_SREV_9300_20_OR_LATER(ah)) { - REG_SET_BIT(ah, AR_WA, AR_WA_UNTIE_RESET_EN | - AR_WA_POR_SHORT | AR_WA_RESET_EN); - } - - - /* * restore the beacon threshold to init value */ REG_WRITE(ah, AR_RSSI_THR, INIT_RSSI_THR); @@ -277,8 +230,7 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah) * reset to our Chip's Power On Reset so that any PCI-E * reset from the bus will not reset our chip */ - - if (AR_SREV_9280_20_OR_LATER(ah) && ah->is_pciexpress) + if (ah->is_pciexpress) ath9k_hw_configpcipowersave(ah, false); ah->wow_event_mask = 0; @@ -298,7 +250,6 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) * are from the 'pattern_enable' in this function and * 'pattern_count' of ath9k_hw_wow_apply_pattern() */ - wow_event_mask = ah->wow_event_mask; /* @@ -306,50 +257,15 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) * WOW sleep, we do want the Reset from the PCI-E to disturb * our hw state */ - if (ah->is_pciexpress) { - /* * we need to untie the internal POR (power-on-reset) * to the external PCI-E reset. We also need to tie * the PCI-E Phy reset to the PCI-E reset. */ - - if (AR_SREV_9300_20_OR_LATER(ah)) { - set = AR_WA_RESET_EN | AR_WA_POR_SHORT; - clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE; - REG_RMW(ah, AR_WA, set, clr); - } else { - if (AR_SREV_9285(ah) || AR_SREV_9287(ah)) - set = AR9285_WA_DEFAULT; - else - set = AR9280_WA_DEFAULT; - - /* - * In AR9280 and AR9285, bit 14 in WA register - * (disable L1) should only be set when device - * enters D3 state and be cleared when device - * comes back to D0 - */ - - if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE) - set |= AR_WA_D3_L1_DISABLE; - - clr = AR_WA_UNTIE_RESET_EN; - set |= AR_WA_RESET_EN | AR_WA_POR_SHORT; - REG_RMW(ah, AR_WA, set, clr); - - /* - * for WoW sleep, we reprogram the SerDes so that the - * PLL and CLK REQ are both enabled. This uses more - * power but otherwise WoW sleep is unstable and the - * chip may disappear. - */ - - if (AR_SREV_9285_12_OR_LATER(ah)) - ath9k_hw_config_serdes_wow_sleep(ah); - - } + set = AR_WA_RESET_EN | AR_WA_POR_SHORT; + clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE; + REG_RMW(ah, AR_WA, set, clr); } /* @@ -378,7 +294,6 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) * Program default values for pattern backoff, aifs/slot/KAL count, * beacon miss timeout, KAL timeout, etc. */ - set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF); REG_SET_BIT(ah, AR_WOW_PATTERN, set); @@ -398,7 +313,7 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) /* * Keep alive timo in ms except AR9280 */ - if (!pattern_enable || AR_SREV_9280(ah)) + if (!pattern_enable) set = AR_WOW_KEEP_ALIVE_NEVER; else set = KAL_TIMEOUT * 32; @@ -420,7 +335,6 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) /* * Configure MAC WoW Registers */ - set = 0; /* Send keep alive timeouts anyway */ clr = AR_WOW_KEEP_ALIVE_AUTO_DIS; @@ -430,16 +344,9 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) else set = AR_WOW_KEEP_ALIVE_FAIL_DIS; - /* - * FIXME: For now disable keep alive frame - * failure. This seems to sometimes trigger - * unnecessary wake up with AR9485 chipsets. - */ set = AR_WOW_KEEP_ALIVE_FAIL_DIS; - REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr); - /* * we are relying on a bmiss failure. ensure we have * enough threshold to prevent false positives @@ -473,14 +380,8 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) set |= AR_WOW_MAC_INTR_EN; REG_RMW(ah, AR_WOW_PATTERN, set, clr); - /* - * For AR9285 and later version of chipsets - * enable WoW pattern match for packets less - * than 256 bytes for all patterns - */ - if (AR_SREV_9285_12_OR_LATER(ah)) - REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B, - AR_WOW_PATTERN_SUPPORTED); + REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B, + AR_WOW_PATTERN_SUPPORTED); /* * Set the power states appropriately and enable PME @@ -488,43 +389,32 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable) clr = 0; set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA; - /* - * This is needed for AR9300 chipsets to wake-up - * the host. - */ - if (AR_SREV_9300_20_OR_LATER(ah)) - clr = AR_PCIE_PM_CTRL_ENA; + clr = AR_PCIE_PM_CTRL_ENA; REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr); - if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { - /* - * this is needed to prevent the chip waking up - * the host within 3-4 seconds with certain - * platform/BIOS. The fix is to enable - * D1 & D3 to match original definition and - * also match the OTP value. Anyway this - * is more related to SW WOW. - */ - clr = AR_PMCTRL_PWR_STATE_D1D3; - REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr); - - set = AR_PMCTRL_PWR_STATE_D1D3_REAL; - REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set); - } - + /* + * this is needed to prevent the chip waking up + * the host within 3-4 seconds with certain + * platform/BIOS. The fix is to enable + * D1 & D3 to match original definition and + * also match the OTP value. Anyway this + * is more related to SW WOW. + */ + clr = AR_PMCTRL_PWR_STATE_D1D3; + REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr); + set = AR_PMCTRL_PWR_STATE_D1D3_REAL; + REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set); REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM); - if (AR_SREV_9300_20_OR_LATER(ah)) { - /* to bring down WOW power low margin */ - set = BIT(13); - REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set); - /* HW WoW */ - clr = BIT(5); - REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr); - } + /* to bring down WOW power low margin */ + set = BIT(13); + REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set); + /* HW WoW */ + clr = BIT(5); + REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr); ath9k_hw_set_powermode_wow_sleep(ah); ah->wow_event_mask = wow_event_mask; |