diff options
54 files changed, 799 insertions, 728 deletions
diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt index c870b6478ec..2871e218a0f 100644 --- a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt +++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt @@ -5,58 +5,32 @@ Required properties: - compatible : "via,vt8500-fb" - reg : Should contain 1 register ranges(address and length) - interrupts : framebuffer controller interrupt -- display: a phandle pointing to the display node +- bits-per-pixel : bit depth of framebuffer (16 or 32) -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. -- default-mode: a videomode within the display with timing parameters - as specified below. +Required subnodes: +- display-timings: see display-timing.txt for information Example: - fb@d800e400 { + fb@d8050800 { compatible = "via,vt8500-fb"; reg = <0xd800e400 0x400>; interrupts = <12>; - display = <&display>; - default-mode = <&mode0>; - }; - -VIA VT8500 Display ------------------------------------------------------ -Required properties (as per of_videomode_helper): - - - hactive, vactive: Display resolution - - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters - in pixels - vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in - lines - - clock: displayclock in Hz - - bpp: lcd panel bit-depth. - <16> for RGB565, <32> for RGB888 - -Optional properties (as per of_videomode_helper): - - width-mm, height-mm: Display dimensions in mm - - hsync-active-high (bool): Hsync pulse is active high - - vsync-active-high (bool): Vsync pulse is active high - - interlaced (bool): This is an interlaced mode - - doublescan (bool): This is a doublescan mode + bits-per-pixel = <16>; -Example: - display: display@0 { - modes { - mode0: mode@0 { + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; - hback-porch = <88>; hfront-porch = <40>; + hback-porch = <88>; hsync-len = <0>; vback-porch = <32>; vfront-porch = <11>; vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ }; }; }; + diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt index 3d325e1d11e..0bcadb2840a 100644 --- a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt @@ -4,20 +4,30 @@ Wondermedia WM8505 Framebuffer Required properties: - compatible : "wm,wm8505-fb" - reg : Should contain 1 register ranges(address and length) -- via,display: a phandle pointing to the display node +- bits-per-pixel : bit depth of framebuffer (16 or 32) -Required nodes: -- display: a display node is required to initialize the lcd panel - This should be in the board dts. See definition in - Documentation/devicetree/bindings/video/via,vt8500-fb.txt -- default-mode: a videomode node as specified in - Documentation/devicetree/bindings/video/via,vt8500-fb.txt +Required subnodes: +- display-timings: see display-timing.txt for information Example: - fb@d8050800 { + fb@d8051700 { compatible = "wm,wm8505-fb"; - reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; + reg = <0xd8051700 0x200>; + bits-per-pixel = <16>; + + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; }; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts index 567cf4e8ab8..877b33afa7e 100644 --- a/arch/arm/boot/dts/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -11,26 +11,22 @@ / { model = "Benign BV07 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi index cf31ced4660..68c8dc64438 100644 --- a/arch/arm/boot/dts/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -98,12 +98,10 @@ interrupts = <43>; }; - fb@d800e400 { + fb: fb@d8050800 { compatible = "via,vt8500-fb"; reg = <0xd800e400 0x400>; interrupts = <12>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts index fd4e248074c..edd2cec3d37 100644 --- a/arch/arm/boot/dts/wm8505-ref.dts +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -11,26 +11,22 @@ / { model = "Wondermedia WM8505 Netbook"; +}; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <32>; /* non-standard but required */ - }; +&fb { + bits-per-pixel = <32>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi index e74a1c0fb9a..bcf668d31b2 100644 --- a/arch/arm/boot/dts/wm8505.dtsi +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -128,11 +128,9 @@ interrupts = <0>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts index cefd938f842..61671a0d9ed 100644 --- a/arch/arm/boot/dts/wm8650-mid.dts +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -11,26 +11,24 @@ / { model = "Wondermedia WM8650-MID Tablet"; +}; + +&fb { + bits-per-pixel = <16>; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; }; }; }; + diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi index db3c0a12e05..9313407bbc3 100644 --- a/arch/arm/boot/dts/wm8650.dtsi +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -128,11 +128,9 @@ interrupts = <43>; }; - fb@d8050800 { + fb: fb@d8050800 { compatible = "wm,wm8505-fb"; reg = <0xd8050800 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/boot/dts/wm8850-w70v2.dts b/arch/arm/boot/dts/wm8850-w70v2.dts index fcc660c8954..32d22532cd6 100644 --- a/arch/arm/boot/dts/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/wm8850-w70v2.dts @@ -15,28 +15,6 @@ / { model = "Wondermedia WM8850-W70v2 Tablet"; - /* - * Display node is based on Sascha Hauer's patch on dri-devel. - * Added a bpp property to calculate the size of the framebuffer - * until the binding is formalized. - */ - display: display@0 { - modes { - mode0: mode@0 { - hactive = <800>; - vactive = <480>; - hback-porch = <88>; - hfront-porch = <40>; - hsync-len = <0>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <1>; - clock = <0>; /* unused but required */ - bpp = <16>; /* non-standard but required */ - }; - }; - }; - backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 50000 1>; /* duty inverted */ @@ -45,3 +23,21 @@ default-brightness-level = <5>; }; }; + +&fb { + bits-per-pixel = <16>; + display-timings { + native-mode = <&timing0>; + timing0: 800x480 { + clock-frequency = <0>; /* unused but required */ + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <88>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi index e8cbfdc87bb..7149cd13e3b 100644 --- a/arch/arm/boot/dts/wm8850.dtsi +++ b/arch/arm/boot/dts/wm8850.dtsi @@ -135,11 +135,9 @@ }; }; - fb@d8051700 { + fb: fb@d8051700 { compatible = "wm,wm8505-fb"; reg = <0xd8051700 0x200>; - display = <&display>; - default-mode = <&mode0>; }; ge_rops@d8050400 { diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index b885322717a..9ae50727078 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -15,55 +15,7 @@ #ifndef __PLAT_S3C_FB_H #define __PLAT_S3C_FB_H __FILE__ -/* S3C_FB_MAX_WIN - * Set to the maximum number of windows that any of the supported hardware - * can use. Since the platform data uses this for an array size, having it - * set to the maximum of any version of the hardware can do is safe. - */ -#define S3C_FB_MAX_WIN (5) - -/** - * struct s3c_fb_pd_win - per window setup data - * @xres : The window X size. - * @yres : The window Y size. - * @virtual_x: The virtual X size. - * @virtual_y: The virtual Y size. - */ -struct s3c_fb_pd_win { - unsigned short default_bpp; - unsigned short max_bpp; - unsigned short xres; - unsigned short yres; - unsigned short virtual_x; - unsigned short virtual_y; -}; - -/** - * struct s3c_fb_platdata - S3C driver platform specific information - * @setup_gpio: Setup the external GPIO pins to the right state to transfer - * the data from the display system to the connected display - * device. - * @vidcon0: The base vidcon0 values to control the panel data format. - * @vidcon1: The base vidcon1 values to control the panel data output. - * @vtiming: Video timing when connected to a RGB type panel. - * @win: The setup data for each hardware window, or NULL for unused. - * @display_mode: The LCD output display mode. - * - * The platform data supplies the video driver with all the information - * it requires to work with the display(s) attached to the machine. It - * controls the initial mode, the number of display windows (0 is always - * the base framebuffer) that are initialised etc. - * - */ -struct s3c_fb_platdata { - void (*setup_gpio)(void); - - struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; - struct fb_videomode *vtiming; - - u32 vidcon0; - u32 vidcon1; -}; +#include <linux/platform_data/video_s3c.h> /** * s3c_fb_set_platdata() - Setup the FB device with platform data. diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 04fa6f1808d..f83f0719922 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -506,7 +506,7 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh, } EXPORT_SYMBOL(drm_gtf_mode); -#if IS_ENABLED(CONFIG_VIDEOMODE) +#ifdef CONFIG_VIDEOMODE_HELPERS int drm_display_mode_from_videomode(const struct videomode *vm, struct drm_display_mode *dmode) { @@ -523,26 +523,25 @@ int drm_display_mode_from_videomode(const struct videomode *vm, dmode->clock = vm->pixelclock / 1000; dmode->flags = 0; - if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH) + if (vm->flags & DISPLAY_FLAGS_HSYNC_HIGH) dmode->flags |= DRM_MODE_FLAG_PHSYNC; - else if (vm->dmt_flags & VESA_DMT_HSYNC_LOW) + else if (vm->flags & DISPLAY_FLAGS_HSYNC_LOW) dmode->flags |= DRM_MODE_FLAG_NHSYNC; - if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH) + if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH) dmode->flags |= DRM_MODE_FLAG_PVSYNC; - else if (vm->dmt_flags & VESA_DMT_VSYNC_LOW) + else if (vm->flags & DISPLAY_FLAGS_VSYNC_LOW) dmode->flags |= DRM_MODE_FLAG_NVSYNC; - if (vm->data_flags & DISPLAY_FLAGS_INTERLACED) + if (vm->flags & DISPLAY_FLAGS_INTERLACED) dmode->flags |= DRM_MODE_FLAG_INTERLACE; - if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN) + if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN) dmode->flags |= DRM_MODE_FLAG_DBLSCAN; drm_mode_set_name(dmode); return 0; } EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode); -#endif -#if IS_ENABLED(CONFIG_OF_VIDEOMODE) +#ifdef CONFIG_OF /** * of_get_drm_display_mode - get a drm_display_mode from devicetree * @np: device_node with the timing specification @@ -572,7 +571,8 @@ int of_get_drm_display_mode(struct device_node *np, return 0; } EXPORT_SYMBOL_GPL(of_get_drm_display_mode); -#endif +#endif /* CONFIG_OF */ +#endif /* CONFIG_VIDEOMODE_HELPERS */ /** * drm_mode_set_name - set the name on a mode diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig index d24d0401347..e461e997245 100644 --- a/drivers/gpu/drm/tilcdc/Kconfig +++ b/drivers/gpu/drm/tilcdc/Kconfig @@ -4,8 +4,7 @@ config DRM_TILCDC select DRM_KMS_HELPER select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER - select OF_VIDEOMODE - select OF_DISPLAY_TIMING + select VIDEOMODE_HELPERS select BACKLIGHT_CLASS_DEVICE help Choose this option if you have an TI SoC with LCDC display diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c index 580b74e2022..90ee4978637 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c @@ -173,7 +173,7 @@ static int panel_connector_get_modes(struct drm_connector *connector) struct drm_display_mode *mode = drm_mode_create(dev); struct videomode vm; - if (videomode_from_timing(timings, &vm, i)) + if (videomode_from_timings(timings, &vm, i)) break; drm_display_mode_from_videomode(&vm, mode); diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 09394657926..981c1c08c72 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -31,26 +31,8 @@ config VIDEO_OUTPUT_CONTROL This framework adds support for low-level control of the video output switch. -config DISPLAY_TIMING - bool - -config VIDEOMODE - bool - -config OF_DISPLAY_TIMING - bool "Enable device tree display timing support" - depends on OF - select DISPLAY_TIMING - help - helper to parse display timings from the devicetree - -config OF_VIDEOMODE - bool "Enable device tree videomode support" - depends on OF - select VIDEOMODE - select OF_DISPLAY_TIMING - help - helper to get videomodes from the devicetree +config VIDEOMODE_HELPERS + bool config HDMI bool @@ -212,14 +194,6 @@ config FB_SYS_FOPS depends on FB default n -config FB_WMT_GE_ROPS - tristate - depends on FB - default n - ---help--- - Include functions for accelerated rectangle filling and area - copying using WonderMedia Graphics Engine operations. - config FB_DEFERRED_IO bool depends on FB @@ -1797,22 +1771,37 @@ config FB_AU1200 option au1200fb:panel=<name>. config FB_VT8500 - bool "VT8500 LCD Driver" + bool "VIA VT8500 framebuffer support" depends on (FB = y) && ARM && ARCH_VT8500 - select FB_WMT_GE_ROPS + select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS) + select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS) select FB_SYS_IMAGEBLIT + select FB_MODE_HELPERS + select VIDEOMODE_HELPERS help This is the framebuffer driver for VIA VT8500 integrated LCD controller. config FB_WM8505 - bool "WM8505 frame buffer support" + bool "Wondermedia WM8xxx-series frame buffer support" depends on (FB = y) && ARM && ARCH_VT8500 - select FB_WMT_GE_ROPS + select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS) + select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS) select FB_SYS_IMAGEBLIT + select FB_MODE_HELPERS + select VIDEOMODE_HELPERS + help + This is the framebuffer driver for WonderMedia WM8xxx-series + integrated LCD controller. This driver covers the WM8505, WM8650 + and WM8850 SoCs. + +config FB_WMT_GE_ROPS + bool "VT8500/WM8xxx accelerated raster ops support" + depends on (FB = y) && (FB_VT8500 || FB_WM8505) + default n help - This is the framebuffer driver for WonderMedia WM8505/WM8650 - integrated LCD controller. + This adds support for accelerated raster operations on the + VIA VT8500 and Wondermedia 85xx series SoCs. source "drivers/video/geode/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 9df387334cb..e414378d6a5 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -171,7 +171,7 @@ obj-$(CONFIG_FB_VIRTUAL) += vfb.o #video output switch sysfs driver obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o -obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o -obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o -obj-$(CONFIG_VIDEOMODE) += videomode.o -obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o +obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o +ifeq ($(CONFIG_OF),y) +obj-$(CONFIG_VIDEOMODE_HELPERS) += of_display_timing.o of_videomode.o +endif diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c index 7fa1bf82372..77cb4ffa1fe 100644 --- a/drivers/video/amifb.c +++ b/drivers/video/amifb.c @@ -3788,19 +3788,7 @@ static struct platform_driver amifb_driver = { }, }; -static int __init amifb_init(void) -{ - return platform_driver_probe(&amifb_driver, amifb_probe); -} - -module_init(amifb_init); - -static void __exit amifb_exit(void) -{ - platform_driver_unregister(&amifb_driver); -} - -module_exit(amifb_exit); +module_platform_driver_probe(amifb_driver, amifb_probe); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:amiga-video"); diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 025428e04c3..98348ec0b3c 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -1158,18 +1158,7 @@ static struct platform_driver atmel_lcdfb_driver = { }, }; -static int __init atmel_lcdfb_init(void) -{ - return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe); -} - -static void __exit atmel_lcdfb_exit(void) -{ - platform_driver_unregister(&atmel_lcdfb_driver); -} - -module_init(atmel_lcdfb_init); -module_exit(atmel_lcdfb_exit); +module_platform_driver_probe(atmel_lcdfb_driver, atmel_lcdfb_probe); MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver"); MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>"); < |