diff options
35 files changed, 1910 insertions, 1301 deletions
diff --git a/Documentation/devicetree/bindings/input/clps711x-keypad.txt b/Documentation/devicetree/bindings/input/clps711x-keypad.txt new file mode 100644 index 00000000000..e68d2bbc6c0 --- /dev/null +++ b/Documentation/devicetree/bindings/input/clps711x-keypad.txt @@ -0,0 +1,27 @@ +* Cirrus Logic CLPS711X matrix keypad device tree bindings + +Required Properties: +- compatible: Shall contain "cirrus,clps711x-keypad". +- row-gpios: List of GPIOs used as row lines. +- poll-interval: Poll interval time in milliseconds. +- linux,keymap: The definition can be found at + bindings/input/matrix-keymap.txt. + +Optional Properties: +- autorepeat: Enable autorepeat feature. + +Example: + keypad { + compatible = "cirrus,ep7312-keypad", "cirrus,clps711x-keypad"; + autorepeat; + poll-interval = <120>; + row-gpios = <&porta 0 0>, + <&porta 1 0>; + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_RIGHT) + >; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt new file mode 100644 index 00000000000..7d8cb92831d --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt @@ -0,0 +1,89 @@ +Qualcomm PM8xxx PMIC Keypad + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058-keypad" + "qcom,pm8921-keypad" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: address of keypad control register + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: the first interrupt specifies the key sense interrupt + and the second interrupt specifies the key stuck interrupt. + The format of the specifier is defined by the binding + document describing the node's interrupt parent. + +- linux,keymap: + Usage: required + Value type: <prop-encoded-array> + Definition: the linux keymap. More information can be found in + input/matrix-keymap.txt. + +- linux,keypad-no-autorepeat: + Usage: optional + Value type: <bool> + Definition: don't enable autorepeat feature. + +- linux,keypad-wakeup: + Usage: optional + Value type: <bool> + Definition: use any event on keypad as wakeup event. + +- keypad,num-rows: + Usage: required + Value type: <u32> + Definition: number of rows in the keymap. More information can be found + in input/matrix-keymap.txt. + +- keypad,num-columns: + Usage: required + Value type: <u32> + Definition: number of columns in the keymap. More information can be + found in input/matrix-keymap.txt. + +- debounce: + Usage: optional + Value type: <u32> + Definition: time in microseconds that key must be pressed or release + for key sense interrupt to trigger. + +- scan-delay: + Usage: optional + Value type: <u32> + Definition: time in microseconds to pause between successive scans + of the matrix array. + +- row-hold: + Usage: optional + Value type: <u32> + Definition: time in nanoseconds to pause between scans of each row in + the matrix array. + +EXAMPLE + + keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupt-parent = <&pmicintc>; + interrupts = <74 1>, <75 1>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt new file mode 100644 index 00000000000..588536cc96e --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt @@ -0,0 +1,46 @@ +Qualcomm PM8xxx PMIC Power Key + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058-pwrkey" + "qcom,pm8921-pwrkey" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: address of power key control register + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: the first interrupt specifies the key release interrupt + and the second interrupt specifies the key press interrupt. + The format of the specifier is defined by the binding + document describing the node's interrupt parent. + +- debounce: + Usage: optional + Value type: <u32> + Definition: time in microseconds that key must be pressed or release + for state change interrupt to trigger. + +- pull-up: + Usage: optional + Value type: <empty> + Definition: presence of this property indicates that the KPDPWR_N pin + should be configured for pull up. + +EXAMPLE + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt new file mode 100644 index 00000000000..4ed467b1e40 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt @@ -0,0 +1,22 @@ +Qualcomm PM8xxx PMIC Vibrator + +PROPERTIES + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8058-vib" + "qcom,pm8921-vib" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: address of vibration control register + +EXAMPLE + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt new file mode 100644 index 00000000000..76db96704a6 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -0,0 +1,55 @@ +FocalTech EDT-FT5x06 Polytouch driver +===================================== + +There are 3 variants of the chip for various touch panel sizes +FT5206GE1 2.8" .. 3.8" +FT5306DE4 4.3" .. 7" +FT5406EE8 7" .. 8.9" + +The software interface is identical for all those chips, so that +currently there is no need for the driver to distinguish between the +different chips. Nevertheless distinct compatible strings are used so +that a distinction can be added if necessary without changing the DT +bindings. + + +Required properties: + - compatible: "edt,edt-ft5206" + or: "edt,edt-ft5306" + or: "edt,edt-ft5406" + + - reg: I2C slave address of the chip (0x38) + - interrupt-parent: a phandle pointing to the interrupt controller + serving the interrupt for this chip + - interrupts: interrupt specification for the touchdetect + interrupt + +Optional properties: + - reset-gpios: GPIO specification for the RESET input + - wake-gpios: GPIO specification for the WAKE input + + - pinctrl-names: should be "default" + - pinctrl-0: a phandle pointing to the pin settings for the + control gpios + + - threshold: allows setting the "click"-threshold in the range + from 20 to 80. + + - gain: allows setting the sensitivity in the range from 0 to + 31. Note that lower values indicate higher + sensitivity. + + - offset: allows setting the edge compensation in the range from + 0 to 31. + +Example: + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5x06_pins>; + interrupt-parent = <&gpio2>; + interrupts = <5 0>; + reset-gpios = <&gpio2 6 1>; + wake-gpios = <&gpio4 9 0>; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt new file mode 100644 index 00000000000..2faf1f1fa39 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt @@ -0,0 +1,30 @@ +* Neonode infrared touchscreen controller + +Required properties: +- compatible: must be "neonode,zforce" +- reg: I2C address of the chip +- interrupts: interrupt to which the chip is connected +- gpios: gpios the chip is connected to + first one is the interrupt gpio and second one the reset gpio +- x-size: horizontal resolution of touchscreen +- y-size: vertical resolution of touchscreen + +Example: + + i2c@00000000 { + /* ... */ + + zforce_ts@50 { + compatible = "neonode,zforce"; + reg = <0x50>; + interrupts = <2 0>; + + gpios = <&gpio5 6 0>, /* INT */ + <&gpio5 9 0>; /* RST */ + + x-size = <800>; + y-size = <600>; + }; + + /* ... */ + }; diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a673c9f3a0b..76842d7dc2e 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -151,6 +151,18 @@ config KEYBOARD_BFIN To compile this driver as a module, choose M here: the module will be called bf54x-keys. +config KEYBOARD_CLPS711X + tristate "CLPS711X Keypad support" + depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) + select INPUT_MATRIXKMAP + select INPUT_POLLDEV + help + Say Y here to enable the matrix keypad on the Cirrus Logic + CLPS711X CPUs. + + To compile this driver as a module, choose M here: the + module will be called clps711x-keypad. + config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO @@ -595,16 +607,6 @@ config KEYBOARD_TC3589X To compile this driver as a module, choose M here: the module will be called tc3589x-keypad. -config KEYBOARD_TNETV107X - tristate "TI TNETV107X keypad support" - depends on ARCH_DAVINCI_TNETV107X - select INPUT_MATRIXKMAP - help - Say Y here if you want to use the TNETV107X keypad. - - To compile this driver as a module, choose M here: the - module will be called tnetv107x-keypad. - config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index a699b617230..11cff7b84b4 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o +obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o @@ -53,7 +54,6 @@ obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o -obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/clps711x-keypad.c b/drivers/input/keyboard/clps711x-keypad.c new file mode 100644 index 00000000000..3955aecee44 --- /dev/null +++ b/drivers/input/keyboard/clps711x-keypad.c @@ -0,0 +1,207 @@ +/* + * Cirrus Logic CLPS711X Keypad driver + * + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/input.h> +#include <linux/input-polldev.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/sched.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/clps711x.h> + +#define CLPS711X_KEYPAD_COL_COUNT 8 + +struct clps711x_gpio_data { + struct gpio_desc *desc; + DECLARE_BITMAP(last_state, CLPS711X_KEYPAD_COL_COUNT); +}; + +struct clps711x_keypad_data { + struct regmap *syscon; + int row_count; + unsigned int row_shift; + struct clps711x_gpio_data *gpio_data; +}; + +static void clps711x_keypad_poll(struct input_polled_dev *dev) +{ + const unsigned short *keycodes = dev->input->keycode; + struct clps711x_keypad_data *priv = dev->private; + bool sync = false; + int col, row; + + for (col = 0; col < CLPS711X_KEYPAD_COL_COUNT; col++) { + /* Assert column */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, + SYSCON1_KBDSCAN_MASK, + SYSCON1_KBDSCAN(8 + col)); + + /* Scan rows */ + for (row = 0; row < priv->row_count; row++) { + struct clps711x_gpio_data *data = &priv->gpio_data[row]; + bool state, state1; + + /* Read twice for protection against fluctuations */ + do { + state = gpiod_get_value_cansleep(data->desc); + cond_resched(); + state1 = gpiod_get_value_cansleep(data->desc); + } while (state != state1); + + if (test_bit(col, data->last_state) != state) { + int code = MATRIX_SCAN_CODE(row, col, + priv->row_shift); + + if (state) { + set_bit(col, data->last_state); + input_event(dev->input, EV_MSC, + MSC_SCAN, code); + } else { + clear_bit(col, data->last_state); + } + + if (keycodes[code]) + input_report_key(dev->input, + keycodes[code], state); + sync = true; + } + } + + /* Set all columns to low */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, + SYSCON1_KBDSCAN_MASK, SYSCON1_KBDSCAN(1)); + } + + if (sync) + input_sync(dev->input); +} + +static int clps711x_keypad_probe(struct platform_device *pdev) +{ + struct clps711x_keypad_data *priv; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct input_polled_dev *poll_dev; + u32 poll_interval; + int i, err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->syscon = + syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1"); + if (IS_ERR(priv->syscon)) + return PTR_ERR(priv->syscon); + + priv->row_count = of_gpio_named_count(np, "row-gpios"); + if (priv->row_count < 1) + return -EINVAL; + + priv->gpio_data = devm_kzalloc(dev, + sizeof(*priv->gpio_data) * priv->row_count, + GFP_KERNEL); + if (!priv->gpio_data) + return -ENOMEM; + + priv->row_shift = get_count_order(CLPS711X_KEYPAD_COL_COUNT); + + for (i = 0; i < priv->row_count; i++) { + struct clps711x_gpio_data *data = &priv->gpio_data[i]; + + data->desc = devm_gpiod_get_index(dev, "row", i); + if (!data->desc) + return -EINVAL; + + if (IS_ERR(data->desc)) + return PTR_ERR(data->desc); + + gpiod_direction_input(data->desc); + } + + err = of_property_read_u32(np, "poll-interval", &poll_interval); + if (err) + return err; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) + return -ENOMEM; + + poll_dev->private = priv; + poll_dev->poll = clps711x_keypad_poll; + poll_dev->poll_interval = poll_interval; + poll_dev->input->name = pdev->name; + poll_dev->input->dev.parent = dev; + poll_dev->input->id.bustype = BUS_HOST; + poll_dev->input->id.vendor = 0x0001; + poll_dev->input->id.product = 0x0001; + poll_dev->input->id.version = 0x0100; + + err = matrix_keypad_build_keymap(NULL, NULL, priv->row_count, + CLPS711X_KEYPAD_COL_COUNT, + NULL, poll_dev->input); + if (err) + goto out_err; + + input_set_capability(poll_dev->input, EV_MSC, MSC_SCAN); + if (of_property_read_bool(np, "autorepeat")) + __set_bit(EV_REP, poll_dev->input->evbit); + + platform_set_drvdata(pdev, poll_dev); + + /* Set all columns to low */ + regmap_update_bits(priv->syscon, SYSCON_OFFSET, SYSCON1_KBDSCAN_MASK, + SYSCON1_KBDSCAN(1)); + + err = input_register_polled_device(poll_dev); + if (err) + goto out_err; + + return 0; + +out_err: + input_free_polled_device(poll_dev); + return err; +} + +static int clps711x_keypad_remove(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev = platform_get_drvdata(pdev); + + input_unregister_polled_device(poll_dev); + input_free_polled_device(poll_dev); + + return 0; +} + +static struct of_device_id clps711x_keypad_of_match[] = { + { .compatible = "cirrus,clps711x-keypad", }, + { } +}; +MODULE_DEVICE_TABLE(of, clps711x_keypad_of_match); + +static struct platform_driver clps711x_keypad_driver = { + .driver = { + .name = "clps711x-keypad", + .owner = THIS_MODULE, + .of_match_table = clps711x_keypad_of_match, + }, + .probe = clps711x_keypad_probe, + .remove = clps711x_keypad_remove, +}; +module_platform_driver(clps711x_keypad_driver); + +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>"); +MODULE_DESCRIPTION("Cirrus Logic CLPS711X Keypad driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index cbf4f8038cb..97ec33572e5 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -439,7 +439,7 @@ static int imx_keypad_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "no irq defined in platform data\n"); - return -EINVAL; + return irq; } input_dev = devm_input_allocate_device(&pdev->dev); @@ -449,7 +449,7 @@ static int imx_keypad_probe(struct platform_device *pdev) } keypad = devm_kzalloc(&pdev->dev, sizeof(struct imx_keypad), - GFP_KERNEL); + GFP_KERNEL); if (!keypad) { dev_err(&pdev->dev, "not enough memory for driver data\n"); return -ENOMEM; diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c index 2c9f19ac35e..80c6b0ef3fc 100644 --- a/drivers/input/keyboard/pmic8xxx-keypad.c +++ b/drivers/input/keyboard/pmic8xxx-keypad.c @@ -19,10 +19,9 @@ #include <linux/bitops.h> #include <linux/delay.h> #include <linux/mutex.h> - -#include <linux/mfd/pm8xxx/core.h> -#include <linux/mfd/pm8xxx/gpio.h> -#include <linux/input/pmic8xxx-keypad.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/input/matrix_keypad.h> #define PM8XXX_MAX_ROWS 18 #define PM8XXX_MAX_COLS 8 @@ -85,8 +84,10 @@ /** * struct pmic8xxx_kp - internal keypad data structure - * @pdata - keypad platform data pointer + * @num_cols - number of columns of keypad + * @num_rows - number of row of keypad * @input - input device pointer for keypad + * @regmap - regmap handle * @key_sense_irq - key press/release irq number * @key_stuck_irq - key stuck notification irq number * @keycodes - array to hold the key codes @@ -96,8 +97,10 @@ * @ctrl_reg - control register value */ struct pmic8xxx_kp { - const struct pm8xxx_keypad_platform_data *pdata; + unsigned int num_rows; + unsigned int num_cols; struct input_dev *input; + struct regmap *regmap; int key_sense_irq; int key_stuck_irq; @@ -110,40 +113,13 @@ struct pmic8xxx_kp { u8 ctrl_reg; }; -static int pmic8xxx_kp_write_u8(struct pmic8xxx_kp *kp, - u8 data, u16 reg) -{ - int rc; - - rc = pm8xxx_writeb(kp->dev->parent, reg, data); - return rc; -} - -static int pmic8xxx_kp_read(struct pmic8xxx_kp *kp, - u8 *data, u16 reg, unsigned num_bytes) -{ - int rc; - - rc = pm8xxx_read_buf(kp->dev->parent, reg, data, num_bytes); - return rc; -} - -static int pmic8xxx_kp_read_u8(struct pmic8xxx_kp *kp, - u8 *data, u16 reg) -{ - int rc; - - rc = pmic8xxx_kp_read(kp, data, reg, 1); - return rc; -} - static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col) { /* all keys pressed on that particular row? */ if (col == 0x00) - return 1 << kp->pdata->num_cols; + return 1 << kp->num_cols; else - return col & ((1 << kp->pdata->num_cols) - 1); + return col & ((1 << kp->num_cols) - 1); } /* @@ -161,9 +137,9 @@ static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col) static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp) { int rc; - u8 scan_val; + unsigned int scan_val; - rc = pmic8xxx_kp_read_u8(kp, &scan_val, KEYP_SCAN); + rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val); if (rc < 0) { dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); return rc; @@ -171,7 +147,7 @@ static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp) scan_val |= 0x1; - rc = pmic8xxx_kp_write_u8(kp, scan_val, KEYP_SCAN); + rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); if (rc < 0) { dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); return rc; @@ -187,31 +163,29 @@ static int pmic8xxx_kp_read_data(struct pmic8xxx_kp *kp, u16 *state, u16 data_reg, int read_rows) { int rc, row; - u8 new_data[PM8XXX_MAX_ROWS]; - - rc = pmic8xxx_kp_read(kp, new_data, data_reg, read_rows); - if (rc) - return rc; + unsigned int val; - for (row = 0; row < kp->pdata->num_rows; row++) { - dev_dbg(kp->dev, "new_data[%d] = %d\n", row, - new_data[row]); - state[row] = pmic8xxx_col_state(kp, new_data[row]); + for (row = 0; row < read_rows; row++) { + rc = regmap_read(kp->regmap, data_reg, &val); + if (rc) + return rc; + dev_dbg(kp->dev, "%d = %d\n", row, val); + state[row] = pmic8xxx_col_state(kp, val); } - return rc; + return 0; } static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state, u16 *old_state) { int rc, read_rows; - u8 scan_val; + unsigned int scan_val; - if (kp->pdata->num_rows < PM8XXX_MIN_ROWS) + if (kp->num_rows < PM8XXX_MIN_ROWS) read_rows = PM8XXX_MIN_ROWS; else - read_rows = kp->pdata->num_rows; + read_rows = kp->num_rows; pmic8xxx_chk_sync_read(kp); @@ -236,14 +210,14 @@ static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state, /* 4 * 32KHz clocks */ udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); - rc = pmic8xxx_kp_read_u8(kp, &scan_val, KEYP_SCAN); + rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val); if (rc < 0) { dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); return rc; } scan_val &= 0xFE; - rc = pmic8xxx_kp_write_u8(kp, scan_val, KEYP_SCAN); + rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); if (rc < 0) dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); @@ -255,13 +229,13 @@ static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state, { int row, col, code; - for (row = 0; row < kp->pdata->num_rows; row++) { + for (row = 0; row < kp->num_rows; row++) { int bits_changed = new_state[row] ^ old_state[row]; if (!bits_changed) continue; - for (col = 0; col < kp->pdata->num_cols; col++) { + for (col = 0; col < kp->num_cols; col++) { if (!(bits_changed & (1 << col))) continue; @@ -287,9 +261,9 @@ static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state) u16 check, row_state; check = 0; - for (row = 0; row < kp->pdata->num_rows; row++) { + for (row = 0; row < kp->num_rows; row++) { row_state = (~new_state[row]) & - ((1 << kp->pdata->num_cols) - 1); + ((1 << kp->num_cols) - 1); if (hweight16(row_state) > 1) { if (found_first == -1) @@ -379,10 +353,10 @@ static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data) static irqreturn_t pmic8xxx_kp_irq(int irq, void *data) { struct pmic8xxx_kp *kp = data; - u8 ctrl_val, events; + unsigned int ctrl_val, events; int rc; - rc = pmic8xxx_kp_read(kp, &ctrl_val, KEYP_CTRL, 1); + rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val); if (rc < 0) { dev_err(kp->dev, "failed to read keyp_ctrl register\n"); return IRQ_HANDLED; @@ -397,8 +371,13 @@ static irqreturn_t pmic8xxx_kp_irq(int irq, void *data) return IRQ_HANDLED; } -static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) +static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp, + struct platform_device *pdev) { + const struct device_node *of_node = pdev->dev.of_node; + unsigned int scan_delay_ms; + unsigned int row_hold_ns; + unsigned int debounce_ms; int bits, rc, cycles; u8 scan_val = 0, ctrl_val = 0; static const u8 row_bits[] = { @@ -406,40 +385,69 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) }; /* Find column bits */ - if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN) + if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN) bits = 0; else - bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN; + bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN; ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) << KEYP_CTRL_SCAN_COLS_SHIFT; /* Find row bits */ - if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) + if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) bits = 0; else - bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; + bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT); - rc = pmic8xxx_kp_write_u8(kp, ctrl_val, KEYP_CTRL); + rc = regmap_write(kp->regmap, KEYP_CTRL, ctrl_val); if (rc < 0) { dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); return rc; } - bits = (kp->pdata->debounce_ms / 5) - 1; + if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms)) + scan_delay_ms = MIN_SCAN_DELAY; + + if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY || + !is_power_of_2(scan_delay_ms)) { + dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); + return -EINVAL; + } + + if (of_property_read_u32(of_node, "row-hold", &row_hold_ns)) + row_hold_ns = MIN_ROW_HOLD_DELAY; + + if (row_hold_ns > MAX_ROW_HOLD_DELAY || + row_hold_ns < MIN_ROW_HOLD_DELAY || + ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { + dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); + return -EINVAL; + } + + if (of_property_read_u32(of_node, "debounce", &debounce_ms)) + debounce_ms = MIN_DEBOUNCE_TIME; + + if (((debounce_ms % 5) != 0) || + debounce_ms > MAX_DEBOUNCE_TIME || + debounce_ms < MIN_DEBOUNCE_TIME) { + dev_err(&pdev->dev, "invalid debounce time supplied\n"); + return -EINVAL; + } + + bits = (debounce_ms / 5) - 1; scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT); - bits = fls(kp->pdata->scan_delay_ms) - 1; + bits = fls(scan_delay_ms) - 1; scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT); /* Row hold time is a multiple of 32KHz cycles. */ - cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; + cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT); - rc = pmic8xxx_kp_write_u8(kp, scan_val, KEYP_SCAN); + rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); if (rc) dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); @@ -447,34 +455,13 @@ static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) } -static int pmic8xxx_kp_config_gpio(int gpio_start, int num_gpios, - struct pmic8xxx_kp *kp, struct pm_gpio *gpio_config) -{ - int rc, i; - - if (gpio_start < 0 || num_gpios < 0) - return -EINVAL; - - for (i = 0; i < num_gpios; i++) { - rc = pm8xxx_gpio_config(gpio_start + i, gpio_config); - if (rc) { - dev_err(kp->dev, "%s: FAIL pm8xxx_gpio_config():" - "for PM GPIO [%d] rc=%d.\n", - __func__, gpio_start + i, rc); - return rc; - } - } - - return 0; -} - static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp) { int rc; kp->ctrl_reg |= KEYP_CTRL_KEYP_EN; - rc = pmic8xxx_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL); + rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg); if (rc < 0) dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); @@ -487,7 +474,7 @@ static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp) kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN; - rc = pmic8xxx_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL); + rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg); if (rc < 0) return rc; @@ -520,106 +507,62 @@ static void pmic8xxx_kp_close(struct input_dev *dev) */ static int pmic8xxx_kp_probe(struct platform_device *pdev) { - const struct pm8xxx_keypad_platform_data *pdata = - dev_get_platdata(&pdev->dev); - const struct matrix_keymap_data *keymap_data; + unsigned int rows, cols; + bool repeat; + bool wakeup; struct pmic8xxx_kp *kp; int rc; - u8 ctrl_val; - - struct pm_gpio kypd_drv = { - .direction = PM_GPIO_DIR_OUT, - .output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN, - .output_value = 0, - .pull = PM_GPIO_PULL_NO, - .vin_sel = PM_GPIO_VIN_S3, - .out_strength = PM_GPIO_STRENGTH_LOW, - .function = PM_GPIO_FUNC_1, - .inv_int_pol = 1, - }; - - struct pm_gpio kypd_sns = { - .direction = PM_GPIO_DIR_IN, - .pull = PM_GPIO_PULL_UP_31P5, - .vin_sel = PM_GPIO_VIN_S3, - .out_strength = PM_GPIO_STRENGTH_NO, - .function = PM_GPIO_FUNC_NORMAL, - .inv_int_pol = 1, - }; + unsigned int ctrl_val; + rc = matrix_keypad_parse_of_params(&pdev->dev, &rows, &cols); + if (rc) + return rc; - if (!pdata || !pdata->num_cols || !pdata->num_rows || - pdata->num_cols > PM8XXX_MAX_COLS || - pdata->num_rows > PM8XXX_MAX_ROWS || - pdata->num_cols < PM8XXX_MIN_COLS) { + if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS || + cols < PM8XXX_MIN_COLS) { dev_err(&pdev->dev, "invalid platform data\n"); return -EINVAL; } - if (!pdata->scan_delay_ms || - pdata->scan_delay_ms > MAX_SCAN_DELAY || - pdata->scan_delay_ms < MIN_SCAN_DELAY || - !is_power_of_2(pdata->scan_delay_ms)) { - dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); - return -EINVAL; - } - - if (!pdata->row_hold_ns || - pdata->row_hold_ns > MAX_ROW_HOLD_DELAY || - pdata->row_hold_ns < MIN_ROW_HOLD_DELAY || - ((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { - dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); - return -EINVAL; - } - - if (!pdata->debounce_ms || - ((pdata->debounce_ms % 5) != 0) || - pdata->debounce_ms > MAX_DEBOUNCE_TIME || - pdata->debounce_ms < MIN_DEBOUNCE_TIME) { - dev_err(&pdev->dev, "invalid debounce time supplied\n"); - return -EINVAL; - } - - keymap_data = pdata->keymap_data; - if (!keymap_data) { - dev_err(&pdev->dev, "no keymap data supplied\n"); - return -EINVAL; - } + repeat = !of_property_read_bool(pdev->dev.of_node, + "linux,input-no-autorepeat"); + wakeup = of_property_read_bool(pdev->dev.of_node, + "linux,keypad-wakeup"); - kp = kzalloc(sizeof(*kp), GFP_KERNEL); + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); if (!kp) return -ENOMEM; + kp->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!kp->regmap) + return -ENODEV; + platform_set_drvdata(pdev, kp); - kp->pdata = pdata; + kp->num_rows = rows; + kp->num_cols = cols; kp->dev = &pdev->dev; - kp->input = input_allocate_device(); + kp->input = devm_input_allocate_device(&pdev->dev); if (!kp->input) { dev_err(&pdev->dev, "unable to allocate input device\n"); - rc = -ENOMEM; - goto err_alloc_device; + return -ENOMEM; } kp->key_sense_irq = platform_get_irq(pdev, 0); if (kp->key_sense_irq < 0) { dev_err(&pdev->dev, "unable to get keypad sense irq\n"); - rc = -ENXIO; - goto err_get_irq; + return kp->key_sense_irq; } kp->key_stuck_irq = platform_get_irq(pdev, 1); if (kp->key_stuck_irq < 0) { dev_err(&pdev->dev, "unable to get keypad stuck irq\n"); - rc = -ENXIO; - goto err_get_irq; + return kp->key_stuck_irq; } - kp->input->name = pdata->input_name ? : "PMIC8XXX keypad"; - kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0"; - - kp->input->dev.parent = &pdev->dev; + kp->input->name = "PMIC8XXX keypad"; + kp->input->phys = "pmic8xxx_keypad/input0"; kp->input->id.bustype = BUS_I2C; kp->input->id.version = 0x0001; @@ -629,15 +572,15 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) kp->input->open = pmic8xxx_kp_open; kp->input->close = pmic8xxx_kp_close; - rc = matrix_keypad_build_keymap(keymap_data, NULL, + rc = matrix_keypad_build_keymap(NULL, NULL, PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS, kp->keycodes, kp->input); if (rc) { dev_err(&pdev->dev, "failed to build keymap\n"); - goto err_get_irq; + return rc; } - if (pdata->rep) + if (repeat) __set_bit(EV_REP, kp->input->evbit); input_set_capability(kp->input, EV_MSC, MSC_SCAN); @@ -647,44 +590,32 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) memset(kp->keystate, 0xff, sizeof(kp->keystate)); memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate)); - rc = pmic8xxx_kpd_init(kp); + rc = pmic8xxx_kpd_init(kp, pdev); if (rc < 0) { dev_err(&pdev->dev, "unable to initialize keypad controller\n"); - goto err_get_irq; - } - - rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start, - pdata->num_cols, kp, &kypd_sns); - if (rc < 0) { - dev_err(&pdev->dev, "unable to configure keypad sense lines\n"); - goto err_gpio_config; - } - - rc = pmic8xxx_kp_config_gpio(pdata->rows_gpio_start, - pdata->num_rows, kp, &kypd_drv); - if (rc < 0) { - dev_err(&pdev->dev, "unable to configure keypad drive lines\n"); - goto err_gpio_config; + return rc; } - rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq, - IRQF_TRIGGER_RISING, "pmic-keypad", kp); + rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq, + pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad", + kp); if (rc < 0) { dev_err(&pdev->dev, "failed to request keypad sense irq\n"); - goto err_get_irq; + return rc; } - rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq, - IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp); + rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq, + pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING, + "pmic-keypad-stuck", kp); if (rc < 0) { dev_err(&pdev->dev, "failed to request keypad stuck irq\n"); - goto err_req_stuck_irq; + return rc; } - rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL); + rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val); if (rc < 0) { dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n"); - goto err_pmic_reg_read; + return rc; } kp->ctrl_reg = ctrl_val; @@ -692,34 +623,10 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev) rc = input_register_device(kp->input); if (rc < 0) { dev_err(&pdev->dev, "unable to register keypad input device\n"); - goto err_pmic_reg_read; + return rc; } - device_init_wakeup(&pdev->dev, pdata->wakeup); - - return 0; - -err_pmic_reg_read: - free_irq(kp->key_stuck_irq, kp); -err_req_stuck_irq: - free_irq(kp->key_sense_irq, kp); -err_gpio_config: -err_get_irq: - input_free_device(kp->input); -err_alloc_device: - kfree(kp); - return rc; -} - -static int pmic8xxx_kp_remove(struct platform_device *pdev) -{ - struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); - - device_init_wakeup(&pdev->dev, 0); - free_irq(kp->key_stuck_irq, kp); - free_irq(kp->key_sense_irq, kp); - input_unregister_device(kp->input); - kfree(kp); + device_init_wakeup(&pdev->dev, wakeup); return 0; } @@ -769,13 +676,20 @@ static int pmic8xxx_kp_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops, pmic8xxx_kp_suspend, pmic8xxx_kp_resume); +static const struct of_device_id pm8xxx_match_table[] = { + { .compatible = "qcom,pm8058-keypad" }, + { .compatible = "qcom,pm8921-keypad" }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8xxx_match_table); + static struct platform_driver pmic8xxx_kp_driver = { .probe = pmic8xxx_kp_probe, - .remove = pmic8xxx_kp_remove, .driver = { - .name = PM8XXX_KEYPAD_DEV_NAME, + .name = "pm8xxx-keypad", .owner = THIS_MODULE, .pm = &pm8xxx_kp_pm_ops, + .of_match_table = pm8xxx_match_table, }, }; module_platform_driver(pmic8xxx_kp_driver); diff --git a/drivers/input/keyboard/tnetv107x-keypad.c b/drivers/input/keyboard/tnetv107x-keypad.c deleted file mode 100644 index 086511c2121..00000000000 --- a/drivers/input/keyboard/tnetv107x-keypad.c +++ /dev/null @@ -1,329 +0,0 @@ -/* - * Texas Instruments TNETV107X Keypad Driver - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/input/matrix_keypad.h> -#include <linux/module.h> - -#define BITS(x) (BIT(x) - 1) - -#define KEYPAD_ROWS 9 -#define KEYPAD_COLS 9 - -#define DEBOUNCE_MIN 0x400ul -#define DEBOUNCE_MAX 0x3ffffffful - -struct keypad_regs { - u32 rev; - u32 mode; - u32 mask; - u32 pol; - u32 dclock; - u32 rclock; - u32 stable_cnt; - u32 in_en; - u32 out; - u32 out_en; - u32 in; - u32 lock; - u32 pres[3]; -}; - -#define keypad_read(kp, reg) __raw_readl(&(kp)->regs->reg) -#define keypad_write(kp, reg, val) __raw_writel(val, &(kp)->regs->reg) - -struct keypad_data { - struct input_dev *input_dev; - struct resource *res; - struct keypad_regs __iomem *regs; - struct clk *clk; - struct device *dev; - spinlock_t lock; - int irq_press; - int irq_release; - int rows, cols, row_shift; - int debounce_ms, active_low; - u32 prev_keys[3]; - unsigned short keycodes[]; -}; - -static irqreturn_t keypad_irq(int irq, void *data) -{ - struct keypad_data *kp = data; - int i, bit, val, row, col, code; - unsigned long flags; - u32 curr_keys[3]; - u32 change; - - spin_lock_irqsave(&kp->lock, flags); - - memset(curr_keys, 0, sizeof(curr_keys)); - if (irq == kp->irq_press) - for (i = 0; i < 3; i++) - curr_keys[i] = keypad_read(kp, pres[i]); - - for (i = 0; i < 3; i++) { - change = curr_keys[i] ^ kp->prev_keys[i]; - - while (change) { - bit = fls(change) - 1; - change ^= BIT(bit); - val = curr_keys[i] & BIT(bit); - bit += i * 32; - row = bit / KEYPAD_COLS; - col = bit % KEYPAD_COLS; - - code = MATRIX_SCAN_CODE(row, col, kp->row_shift); - input_event(kp->input_dev, EV_MSC, MSC_SCAN, code); - input_report_key(kp->input_dev, kp->keycodes[code], - val); - } - } - input_sync(kp->input_dev); - memcpy(kp->prev_keys, curr_keys, sizeof(curr_keys)); - - if (irq == kp->irq_press) - keypad_write(kp, lock, 0); /* Allow hardware updates */ - - spin_unlock_irqrestore(&kp->lock, flags); - - return IRQ_HANDLED; -} - -static int keypad_start(struct input_dev *dev) -{ - struct keypad_data *kp = input_get_drvdata(dev); - unsigned long mask, debounce, clk_rate_khz; - unsigned long flags; - - clk_enable(kp->clk); - clk_rate_khz = clk_get_rate(kp->clk) / 1000; - - spin_lock_irqsave(&kp->lock, flags); - - /* Initialize device registers */ - keypad_write(kp, mode, 0); - - mask = BITS(kp->rows) << KEYPAD_COLS; - mask |= BITS(kp->cols); - keypad_write(kp, mask, ~mask); - - keypad_write(kp, pol, kp->active_low ? 0 : 0x3ffff); - keypad_write(kp, stable_cnt, 3); - - debounce = kp->debounce_ms * clk_rate_khz; - debounce = clamp(debounce, DEBOUNCE_MIN, DEBOUNCE_MAX); - keypad_write(kp, dclock, debounce); - keypad_write(kp, rclock, 4 * debounce); - - keypad_write(kp, in_en, 1); - - spin_unlock_irqrestore(&kp->lock, flags); - - return 0; -} - -static void keypad_stop(struct input_dev *dev) -{ - struct keypad_data *kp = input_get_drvdata(dev); - - synchronize_irq(kp->irq_press); - synchronize_irq(kp->irq_release); - clk_disable(kp->clk); -} - -static int keypad_probe(struct platform_device *pdev) -{ - const struct matrix_keypad_platform_data *pdata; - const struct matrix_keymap_data *keymap_data; - struct device *dev = &pdev->dev; - struct keypad_data *kp; - int error = 0, sz, row_shift; - u32 rev = 0; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - dev_err(dev, "cannot find device data\n"); - return -EINVAL; - } - - keymap_data = pdata->keymap_data; - if (!keymap_data) { - dev_err(dev, "cannot find keymap data\n"); - return -EINVAL; - } - - row_shift = get_count_order(pdata->num_col_gpios); - sz = offsetof(struct keypad_data, keycodes); - sz += (pdata->num_row_gpios << row_shift) * sizeof(kp->keycodes[0]); - kp = kzalloc(sz, GFP_KERNEL); - if (!kp) { - dev_err(dev, "cannot allocate device info\n"); - return -ENOMEM; - } - - kp->dev = dev; - kp->rows = pdata->num_row_gpios; - kp->cols = pdata->num_col_gpios; - kp->row_shift = row_shift; - platform_set_drvdata(pdev, kp); - spin_lock_init(&kp->lock); - - kp->irq_press = platform_get_irq_byname(pdev, "press"); - kp->irq_release = platform_get_irq_byname(pdev, "release"); - if (kp->irq_press < 0 || kp->irq_release < 0) { - dev_err(dev, "cannot determine device interrupts\n"); - error = -ENODEV; - goto error_res; - } - - kp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!kp->res) { - dev_err(dev, "cannot determine register area\n"); - error = -ENODEV; - goto error_res; - } - - if (!request_mem_region(kp->res->start, resource_size(kp->res), - pdev->name)) { - dev_err(dev, "cannot claim register memory\n"); - kp->res = NULL; - error = -EINVAL; - goto error_res; - } - - kp->regs = ioremap(kp->res->start, resource_size(kp->res)); - if (!kp->regs) { - dev_err(dev, "cannot map register memory\n"); - error = -ENOMEM; - goto error_map; - } - - kp->clk = clk_get(dev, NULL); - if (IS_ERR(kp->clk)) { - dev_err(dev, "cannot claim device clock\n"); - error = PTR_ERR(kp->clk); - goto error_clk; - } - - error = request_threaded_irq(kp->irq_press, NULL, keypad_irq, - IRQF_ONESHOT, dev_name(dev), kp); - if (error < 0) { - dev_err(kp->dev, "Could not allocate keypad press key irq\n"); - goto error_irq_press; - } - - error = request_threaded_irq(kp->irq_release, NULL, keypad_irq, - IRQF_ONESHOT, dev_name(dev), kp); - if (error < 0) { - dev_err(kp->dev, "Could not allocate keypad release key irq\n"); - goto error_irq_release; - } - - kp->input_dev = input_allocate_device(); - if (!kp->input_dev) { - dev_err(dev, "cannot allocate input device\n"); - error = -ENOMEM; - goto error_input; - } - - kp->input_dev->name = pdev->name; - kp->input_dev->dev.parent = &pdev->dev; - kp->input_dev->open = keypad_start; - kp->input_dev->close = keypad_stop; - - clk_enable(kp->clk); - rev = keypad_read(kp, rev); - kp->input_dev->id.bustype = BUS_HOST; - kp->input_dev->id.product = ((rev >> 8) & 0x07); - kp->input_dev->id.version = ((rev >> 16) & 0xfff); - clk_disable(kp->clk); - - error = matrix_keypad_build_keymap(keymap_data, NULL, - kp->rows, kp->cols, - kp->keycodes, kp->input_dev); - if (error) { - dev_err(dev, "Failed to build keymap\n"); - goto error_reg; - } - - if (!pdata->no_autorepeat) - kp->input_dev->evbit[0] |= BIT_MASK(EV_REP); - input_set_capability(kp->input_dev, EV_MSC, MSC_SCAN); - - input_set_drvdata(kp->input_dev, kp); - - error = input_register_device(kp->input_dev); - if (error < 0) { - dev_err(dev, "Could not register input device\n"); - goto error_reg; - } - - return 0; - - -error_reg: - input_free_device(kp->input_dev); -error_input: - free_irq(kp->irq_release, kp); -error_irq_release: - free_irq(kp->irq_press, kp); -error_irq_press: - clk_put(kp->clk); -error_clk: - iounmap(kp->regs); -error_map: - release_mem_region(kp->res->start, resource_size(kp->res)); -error_res: - kfree(kp); - return error; -} - -static int keypad_remove(struct platform_device *pdev) -{ - struct keypad_data *kp = platform_get_drvdata(pdev); - - free_irq(kp->irq_press, kp); - free_irq(kp->irq_release, kp); - input_unregister_device(kp->input_dev); - clk_put(kp->clk); - iounmap(kp->regs); - release_mem_region(kp->res->start, resource_size(kp->res)); - kfree(kp); - - return 0; -} - -static struct platform_driver keypad_driver = { - .probe = keypad_probe, - .remove = keypad_remove, - .driver.name = "tnetv107x-keypad", - .driver.owner = THIS_MODULE, -}; -module_platform_driver(keypad_driver); - -MODULE_AUTHOR("Cyril Chemparathy"); -MODULE_DESCRIPTION("TNETV107X Keypad Driver"); -MODULE_ALIAS("platform:tnetv107x-keypad"); -MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7904ab05527..f772981bdcd 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -269,7 +269,7 @@ config INPUT_COBALT_BTNS config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" - depends on X86 && !X86_64 + depends on X86_32 select INPUT_POLLDEV select INPUT_SPARSEKMAP select NEW_LEDS @@ -666,4 +666,14 @@ config INPUT_IDEAPAD_SLIDEBAR To compile this driver as a module, choose M here: the module will be called ideapad_slidebar. +config INPUT_SOC_BUTTON_ARRAY + tristate "Windows-compatible SoC Button Array" + depends on KEYBOARD_GPIO + help + Say Y here if you have a SoC-based tablet that originally + runs Windows 8. + + To compile this driver as a module, choose M here: the + module will be called soc_button_array. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index cda71fc52fb..4955ad322a0 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o +obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o diff --git a/drivers/input/misc/ims-pcu.c b/drivers/input/misc/ims-pcu.c index e204f26b001..5a736397d9c 100644 --- a/drivers/input/misc/ims-pcu.c +++ b/drivers/input/misc/ims-pcu.c @@ -51,6 +51,8 @@ struct ims_pcu_backlight { #define IMS_PCU_BL_VERSION_LEN (9 + 1) #define IMS_PCU_BL_RESET_REASON_LEN (2 + 1) +#define IMS_PCU_PCU_B_DEVICE_ID 5 + #define IMS_PCU_BUF_SIZE 128 struct ims_pcu { @@ -68,6 +70,9 @@ struct ims_pcu { char bl_version[IMS_PCU_BL_VERSION_LEN]; char reset_reason[IMS_PCU_BL_RESET_REASON_LEN]; int update_firmware_status; + u8 device_id; + + u8 ofn_reg_addr; struct usb_interface *ctrl_intf; @@ -371,6 +376,8 @@ static void ims_pcu_destroy_gamepad(struct ims_pcu *pcu) #define IMS_PCU_CMD_GET_DEVICE_ID 0xae #define IMS_PCU_CMD_SPECIAL_INFO 0xb0 #define IMS_PCU_CMD_BOOTLOADER 0xb1 /* Pass data to bootloader */ +#define IMS_PCU_CMD_OFN_SET_CONFIG 0xb3 +#define IMS_PCU_CMD_OFN_GET_CONFIG 0xb4 /* PCU responses */ #define IMS_PCU_RSP_STATUS 0xc0 @@ -389,6 +396,9 @@ static void ims_pcu_destroy_gamepad(struct ims_pcu *pcu) #define IMS_PCU_RSP_GET_DEVICE_ID 0xce #define IMS_PCU_RSP_SPECIAL_INFO 0xd0 #define IMS_PCU_RSP_BOOTLOADER 0xd1 /* Bootloader response */ +#define IMS_PCU_RSP_OFN_SET_CONFIG 0xd2 +#define IMS_PCU_RSP_OFN_GET_CONFIG 0xd3 + #define IMS_PCU_RSP_EVNT_BUTTONS 0xe0 /* Unsolicited, button state */ #define IMS_PCU_GAMEPAD_MASK 0x0001ff80UL /* Bits 7 through 16 */ @@ -1256,6 +1266,225 @@ static struct attribute_group ims_pcu_attr_group = { .attrs = ims_pcu_attrs, }; +/* Support for a separate OFN attribute group */ + +#define OFN_REG_RESULT_OFFSET 2 + +static int ims_pcu_read_ofn_config(struct ims_pcu *pcu, u8 addr, u8 *data) +{ + int error; + s16 result; + + error = ims_pcu_execute_command(pcu, OFN_GET_CONFIG, + &addr, sizeof(addr)); + if (error) + return error; + + result = (s16)get_unaligned_le16(pcu->cmd_buf + OFN_REG_RESULT_OFFSET); + if (result < 0) + return -EIO; + + /* We only need LSB */ + *data = pcu->cmd_buf[OFN_REG_RESULT_OFFSET]; + return 0; +} + +static int ims_pcu_write_ofn_config(struct ims_pcu *pcu, u8 addr, u8 data) +{ + u8 buffer[] = { addr, data }; + int error; + s16 result; + + error = ims_pcu_execute_command(pcu, OFN_SET_CONFIG, + &buffer, sizeof(buffer)); + if (error) + return error; + + result = (s16)get_unaligned_le16(pcu->cmd_buf + OFN_REG_RESULT_OFFSET); + if (result < 0) + return -EIO; + + return 0; +} + +static ssize_t ims_pcu_ofn_reg_data_show(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + int error; + u8 data; + + mutex_lock(&pcu->cmd_mutex); + error = ims_pcu_read_ofn_config(pcu, pcu->ofn_reg_addr, &data); + mutex_unlock(&pcu->cmd_mutex); + + if (error) + return error; + + return scnprintf(buf, PAGE_SIZE, "%x\n", data); +} + +static ssize_t ims_pcu_ofn_reg_data_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + int error; + u8 value; + + error = kstrtou8(buf, 0, &value); + if (error) + return error; + + mutex_lock(&pcu->cmd_mutex); + error = ims_pcu_write_ofn_config(pcu, pcu->ofn_reg_addr, value); + mutex_unlock(&pcu->cmd_mutex); + + return error ?: count; +} + +static DEVICE_ATTR(reg_data, S_IRUGO | S_IWUSR, + ims_pcu_ofn_reg_data_show, ims_pcu_ofn_reg_data_store); + +static ssize_t ims_pcu_ofn_reg_addr_show(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + int error; + + mutex_lock(&pcu->cmd_mutex); + error = scnprintf(buf, PAGE_SIZE, "%x\n", pcu->ofn_reg_addr); + mutex_unlock(&pcu->cmd_mutex); + + return error; +} + +static ssize_t ims_pcu_ofn_reg_addr_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + int error; + u8 value; + + error = kstrtou8(buf, 0, &value); + if (error) + return error; + + mutex_lock(&pcu->cmd_mutex); + pcu->ofn_reg_addr = value; + mutex_unlock(&pcu->cmd_mutex); + + return error ?: count; +} + +static DEVICE_ATTR(reg_addr, S_IRUGO | S_IWUSR, + ims_pcu_ofn_reg_addr_show, ims_pcu_ofn_reg_addr_store); + +struct ims_pcu_ofn_bit_attribute { + struct device_attribute dattr; + u8 addr; + u8 nr; +}; + +static ssize_t ims_pcu_ofn_bit_show(struct device *dev, + struct device_attribute *dattr, + char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct ims_pcu_ofn_bit_attribute *attr = + container_of(dattr, struct ims_pcu_ofn_bit_attribute, dattr); + int error; + u8 data; + + mutex_lock(&pcu->cmd_mutex); + error = ims_pcu_read_ofn_config(pcu, attr->addr, &data); + mutex_unlock(&pcu->cmd_mutex); + + if (error) + return error; + + return scnprintf(buf, PAGE_SIZE, "%d\n", !!(data & (1 << attr->nr))); +} + +static ssize_t ims_pcu_ofn_bit_store(struct device *dev, + struct device_attribute *dattr, + const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct ims_pcu *pcu = usb_get_intfdata(intf); + struct ims_pcu_ofn_bit_attribute *attr = + container_of(dattr, struct ims_pcu_ofn_bit_attribute, dattr); + int error; + int value; + u8 data; + + error = kstrtoint(buf, 0, &value); + if (error) + return error; + + if (value > 1) + return -EINVAL; + + mutex_lock(&pcu->cmd_mutex); + + error = ims_pcu_read_ofn_config(pcu, attr->addr, &data); + if (!error) { + if (value) + data |= 1U << attr->nr; + else + data &= ~(1U << attr->nr); + + error = ims_pcu_write_ofn_config(pcu, attr->addr, data); + } + + mutex_unlock(&pcu->cmd_mutex); + + return error ?: count; +} + +#define IMS_PCU_OFN_BIT_ATTR(_field, _addr, _nr) \ +struct ims_pcu_ofn_bit_attribute ims_pcu_ofn_attr_##_field = { \ + .dattr = __ATTR(_field, S_IWUSR | S_IRUGO, \ + ims_pcu_ofn_bit_show, ims_pcu_ofn_bit_store), \ + .addr = _addr, \ + .nr = _nr, \ +} + +static IMS_PCU_OFN_BIT_ATTR(engine_enable, 0x60, 7); +static IMS_PCU_OFN_BIT_ATTR(speed_enable, 0x60, 6); +static IMS_PCU_OFN_BIT_ATTR(assert_enable, 0x60, 5); +static IMS_PCU_OFN_BIT_ATTR(xyquant_enable, 0x60, 4); +static IMS_PCU_OFN_BIT_ATTR(xyscale_enable, 0x60, 1); + +static IMS_PCU_OFN_BIT_ATTR(scale_x2, 0x63, 6); +static IMS_PCU_OFN_BIT_ATTR(scale_y2, 0x63, 7); + +static struct attribute *ims_pcu_ofn_attrs[] = { + &dev_attr_reg_data.attr, + &dev_attr_reg_addr.attr, + &ims_pcu_ofn_attr_engine_enable.dattr.attr, + &ims_pcu_ofn_attr_speed_enable.dattr.attr, + &ims_pcu_ofn_attr_assert_enable.dattr.attr, + &ims_pcu_ofn_attr_xyquant_enable.dattr.attr, + &ims_pcu_ofn_attr_xyscale_enable.dattr.attr, + &ims_pcu_ofn_attr_scale_x2.dattr.attr, + &ims_pcu_ofn_attr_scale_y2.dattr.attr, + NULL +}; + +static struct attribute_group ims_pcu_ofn_attr_group = { + .name = "ofn", + .attrs = ims_pcu_ofn_attrs, +}; + static void ims_pcu_irq(struct urb *urb) { struct ims_pcu *pcu = urb->context; @@ -1624,7 +1853,6 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu) static atomic_t device_no = ATOMIC_INIT(0); const struct ims_pcu_device_info *info; - u8 device_id; int error; error = ims_pcu_get_device_info(pcu); @@ -1633,7 +1861,7 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu) return error; } - error = ims_pcu_identify_type(pcu, &device_id); + error = ims_pcu_identify_type(pcu, &pcu->device_id); if (error) { dev_err(pcu->dev, "Failed to identify device, error: %d\n", error); @@ -1645,9 +1873,9 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu) return 0; } - if (device_id >= ARRAY_SIZE(ims_pcu_device_info) || - !ims_pcu_device_info[device_id].keymap) { - dev_err(pcu->dev, "Device ID %d is not valid\n", device_id); + if (pcu->device_id >= ARRAY_SIZE(ims_pcu_device_info) || + !ims_pcu_device_info[pcu->device_id].keymap) { + dev_err(pcu->dev, "Device ID %d is not valid\n", pcu->device_id); /* Same as above, punt to userspace */ return 0; } @@ -1655,11 +1883,21 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu) /* Device appears to be operable, complete initialization */ pcu->device_no = atomic_inc_return(&device_no) - 1; + /* + * PCU-B devices, both GEN_1 and GEN_2 do not have OFN sensor + */ + if (pcu->device_id != IMS_PCU_PCU_B_DEVICE_ID) { + error = sysfs_create_group(&pcu->dev->kobj, + &ims_pcu_ofn_attr_group); + if (error) + return error; + } + error = ims_pcu_setup_backlight(pcu); if (error) return error; - info = &ims_pcu_device_info[device_id]; + info = &ims_pcu_device_info[pcu->device_id]; error = ims_pcu_setup_buttons(pcu, info->keymap, info->keymap_len); if (error) goto err_destroy_backlight; @@ -1674,10 +1912,10 @@ static int ims_pcu_init_application_mode(struct ims_pcu *pcu) return 0; -err_destroy_backlight: - ims_pcu_destroy_backlight(pcu); err_destroy_buttons: ims_pcu_destroy_buttons(pcu); +err_destroy_backlight: + ims_pcu_destroy_backlight(pcu); return error; } @@ -1691,6 +1929,10 @@ static void ims_pcu_destroy_application_mode(struct ims_pcu *pcu) ims_pcu_destroy_gamepad(pcu); ims_pcu_destroy_buttons(pcu); ims_pcu_destroy_backlight(pcu); + + if (pcu->device_id != IMS_PCU_PCU_B_DEVICE_ID) + sysfs_remove_group(&pcu->dev->kobj, + &ims_pcu_ofn_attr_group); } } diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c index b88b7cbf93e..6a915ba31bb 100644 --- a/drivers/input/misc/pm8xxx-vibrator.c +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -142,7 +142,6 @@ static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data, } static int pm8xxx_vib_probe(struct platform_device *pdev) - { struct pm8xxx_vib *vib; struct input_dev *input_dev; @@ -214,12 +213,20 @@ static int pm8xxx_vib_suspend(struct device *dev) static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL); +static const struct of_device_id pm8xxx_vib_id_table[] = { + { .compatible = "qcom,pm8058-vib" }, + { .compatible = "qcom,pm8921-vib" }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table); + static struct platform_driver pm8xxx_vib_driver = { .probe = pm8xxx_vib_probe, .driver = { .name = "pm8xxx-vib", .owner = THIS_MODULE, .pm = &pm8xxx_vib_pm_ops, + .of_match_table = pm8xxx_vib_id_table, }, }; module_platform_driver(pm8xxx_vib_driver); diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 0e1a05f9585..1cb8fda7a16 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -19,8 +19,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/log2.h> - -#include <linux/input/pmic8xxx-pwrkey.h> +#include <linux/of.h> #define PON_CNTL_1 0x1C #define PON_CNTL_PULL_UP BIT(7) @@ -89,15 +88,15 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) unsigned int pon_cntl; struct regmap *regmap; struct pmic8xxx_pwrkey *pwrkey; - const struct pm8xxx_pwrkey_platform_data *pdata = - dev_get_platdata(&pdev->dev); + u32 kpd_delay; + bool pull_up; - if (!pdata) { - dev_err(&pdev->dev, "power key platform data not supplied\n"); - return -EINVAL; - } + if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay)) + kpd_delay = 0; - if (pdata->kpd_trigger_delay_us > 62500) { + pull_up = of_property_read_bool(pdev->dev.of_node, "pull-up"); + + if (kpd_delay > 62500) { dev_err(&pdev->dev, "invalid power key trigger delay\n"); return -EINVAL; } @@ -125,7 +124,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) pwr->name = "pmic8xxx_pwrkey"; pwr->phys = "pmic8xxx_pwrkey/input0"; - delay = (pdata->kpd_trigger_delay_us << 10) / USEC_PER_SEC; + delay = (kpd_delay << 10) / USEC_PER_SEC; delay = 1 + ilog2(delay); err = regmap_read(regmap, PON_CNTL_1, &pon_cntl); @@ -136,7 +135,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) pon_cntl &= ~PON_CNTL_TRIG_DELAY_MASK; pon_cntl |= (delay & PON_CNTL_TRIG_DELAY_MASK); - if (pdata->pull_up) + if (pull_up) pon_cntl |= PON_CNTL_PULL_UP; else pon_cntl &= ~PON_CNTL_PULL_UP; @@ -172,7 +171,7 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, pwrkey); - device_init_wakeup(&pdev->dev, pdata->wakeup); + device_init_wakeup(&pdev->dev, 1); return 0; } @@ -184,13 +183,21 @@ static int pmic8xxx_pwrkey_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id pm8xxx_pwr_key_id_table[] = { + { .compatible = "qcom,pm8058-pwrkey" }, + { .compatible = "qcom,pm8921-pwrkey" }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8xxx_pwr_key_id_table); + static struct platform_driver pmic8xxx_pwrkey_driver = { .probe = pmic8xxx_pwrkey_probe, .remove = pmic8xxx_pwrkey_remove, .driver = { - .name = PM8XXX_PWRKEY_DEV_NAME, + .name = "pm8xxx-pwrkey", .owner = THIS_MODULE, .pm = &pm8xxx_pwr_key_pm_ops, + .of_match_table = pm8xxx_pwr_key_id_table, }, }; module_platform_driver(pmic8xxx_pwrkey_driver); diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c index e8897c36d21..e4104f9b2e6 100644 --- a/drivers/input/misc/sirfsoc-onkey.c +++ b/drivers/input/misc/sirfsoc-onkey.c @@ -1,7 +1,8 @@ /* * Power key driver for SiRF PrimaII * - * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company. + * Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group + * company. * * Licensed under GPLv2 or later. */ @@ -13,16 +14,41 @@ #include <linux/input.h> #include <linux/rtc/sirfsoc_rtciobrg.h> #include <linux/of.h> +#include <linux/workqueue.h> struct sirfsoc_pwrc_drvdata { u32 pwrc_base; struct input_dev *input; + struct delayed_work work; }; #define PWRC_ON_KEY_BIT (1 << 0) #define PWRC_INT_STATUS 0xc #define PWRC_INT_MASK 0x10 +#define PWRC_PIN_STATUS 0x14 +#define PWRC_KEY_DETECT_UP_TIME 20 /* ms*/ + +static int sirfsoc_pwrc_is_on_key_down(struct sirfsoc_pwrc_drvdata *pwrcdrv) +{ + u32 state = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + + PWRC_PIN_STATUS); + return !(state & PWRC_ON_KEY_BIT); /* ON_KEY is active low */ +} + +static void sirfsoc_pwrc_report_event(struct work_struct *work) +{ + struct sirfsoc_pwrc_drvdata *pwrcdrv = + container_of(work, struct sirfsoc_pwrc_drvdata, work.work); + + if (sirfsoc_pwrc_is_on_key_down(pwrcdrv)) { + schedule_delayed_work(&pwrcdrv->work, + msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME)); + } else { + input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 0); + input_sync(pwrcdrv->input); + } +} static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id) { @@ -34,21 +60,44 @@ static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id) sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT, pwrcdrv->pwrc_base + PWRC_INT_STATUS); - /* - * For a typical Linux system, we report KEY_SUSPEND to trigger apm-power.c - * to queue a SUSPEND APM event - */ - input_event(pwrcdrv->input, EV_PWR, KEY_SUSPEND, 1); + input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 1); input_sync(pwrcdrv->input); - - /* - * Todo: report KEY_POWER event for Android platforms, Android PowerManager - * will handle the suspend and powerdown/hibernation - */ + schedule_delayed_work(&pwrcdrv->work, + msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME)); return IRQ_HANDLED; } +static void sirfsoc_pwrc_toggle_interrupts(struct sirfsoc_pwrc_drvdata *pwrcdrv, + bool enable) +{ + u32 int_mask; + + int_mask = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK); + if (enable) + int_mask |= PWRC_ON_KEY_BIT; + else + int_mask &= ~PWRC_ON_KEY_BIT; + sirfsoc_rtc_iobrg_writel(int_mask, pwrcdrv->pwrc_base + PWRC_INT_MASK); +} + +static int sirfsoc_pwrc_open(struct input_dev *input) +{ + struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input); + + sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true); + + return 0; +} + +static void sirfsoc_pwrc_close(struct input_dev *input) +{ + struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input); + + sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false); + cancel_delayed_work_sync(&pwrcdrv->work); +} + static const struct of_device_id sirfsoc_pwrc_of_match[] = { { .compatible = "sirf,prima2-pwrc" }, {}, @@ -70,7 +119,7 @@ static int sirfsoc_pwrc_probe(struct platform_device *pdev) } /* - * we can't use of_iomap because pwrc is not mapped in memory, + * We can't use of_iomap because pwrc is not mapped in memory, * the so-called base address is only offset in rtciobrg */ error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base); @@ -86,11 +135,22 @@ static int sirfsoc_pwrc_probe(struct platform_device *pdev) pwrcdrv->input->name = "sirfsoc pwrckey"; pwrcdrv->input->phys = "pwrc/input0"; - pwrcdrv->input->evbit[0] = BIT_MASK(EV_PWR); + pwrcdrv->input->evbit[0] = BIT_MASK(EV_KEY); + input_set_capability(pwrcdrv->input, EV_KEY, KEY_POWER); + + INIT_DELAYED_WORK(&pwrcdrv->work, sirfsoc_pwrc_report_event); + + pwrcdrv->input->open = sirfsoc_pwrc_open; + pwrcdrv->input->close = sirfsoc_pwrc_close; + + input_set_drvdata(pwrcdrv->input, pwrcdrv); + + /* Make sure the device is quiesced */ + sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false); irq = platform_get_irq(pdev, 0); error = devm_request_irq(&pdev->dev, irq, - sirfsoc_pwrc_isr, IRQF_SHARED, + sirfsoc_pwrc_isr, 0, "sirfsoc_pwrc_int", pwrcdrv); if (error) { dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n", @@ -98,11 +158,6 @@ static int sirfsoc_pwrc_probe(struct platform_device *pdev) return error; } - sirfsoc_rtc_iobrg_writel( - sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK) | - PWRC_ON_KEY_BIT, - pwrcdrv->pwrc_base + PWRC_INT_MASK); - error = input_register_device(pwrcdrv->input); if (error) { dev_err(&pdev->dev, @@ -111,7 +166,7 @@ static int sirfsoc_pwrc_probe(struct platform_device *pdev) return error; } - platform_set_drvdata(pdev, pwrcdrv); + dev_set_drvdata(&pdev->dev, pwrcdrv); device_init_wakeup(&pdev->dev, 1); return 0; @@ -125,25 +180,25 @@ static int sirfsoc_pwrc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int pwrc_resume(struct device *dev) +static int sirfsoc_pwrc_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct sirfsoc_pwrc_drvdata *pwrcdrv = platform_get_drvdata(pdev); + struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev); + struct input_dev *input = pwrcdrv->input; /* * Do not mask pwrc interrupt as we want pwrc work as a wakeup source * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c */ - sirfsoc_rtc_iobrg_writel( - sirfsoc_rtc_iobrg_readl( - pwrcdrv->pwrc_base + PWRC_INT_MASK) | PWRC_ON_KEY_BIT, - pwrcdrv->pwrc_base + PWRC_INT_MASK); + mutex_lock(&input->mutex); + if (input->users) + sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true); + mutex_unlock(&input->mutex); return 0; } #endif -static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, pwrc_resume); +static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume); static struct platform_driver sirfsoc_pwrc_driver = { .probe = sirfsoc_pwrc_probe, diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c new file mode 100644 index 00000000000..08ead2aaede --- /dev/null +++ b/drivers/input/misc/soc_button_array.c @@ -0,0 +1,218 @@ +/* + * Supports for the button array on SoC tablets originally running + * Windows 8. + * + * (C) Copyright 2014 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/module.h> +#include <linux/input.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/gpio/consumer.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/pnp.h> + +/* + * Definition of buttons on the tablet. The ACPI index of each button + * is defined in section 2.8.7.2 of "Windows ACPI Design Guide for SoC + * Platforms" + */ +#define MAX_NBUTTONS 5 + +struct soc_button_info { + const char *name; + int acpi_index; + unsigned int event_type; + unsigned int event_code; + bool autorepeat; + bool wakeup; +}; + +/* + * Some of the buttons like volume up/down are auto repeat, while others + * are not. To support both, we register two platform devices, and put + * buttons into them based on whether the key should be auto repeat. + */ +#define BUTTON_TYPES 2 + +struct soc_button_data { + struct platform_device *children[BUTTON_TYPES]; +}; + +/* + * Get the Nth GPIO number from the ACPI object. + */ +static int soc_button_lookup_gpio(struct device *dev, int acpi_index) +{ + struct gpio_desc *desc; + int gpio; + + desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index); + if (IS_ERR(desc)) + return PTR_ERR(desc); + + gpio = desc_to_gpio(desc); + + gpiod_put(desc); + + return gpio; +} + +static struct platform_device * +soc_button_device_create(struct pnp_dev *pdev, + const struct soc_button_info *button_info, + bool autorepeat) +{ + const struct soc_button_info *info; + struct platform_device *pd; + struct gpio_keys_button *gpio_keys; + struct gpio_keys_platform_data *gpio_keys_pdata; + int n_buttons = 0; + int gpio; + int error; + + gpio_keys_pdata = devm_kzalloc(&pdev->dev, + sizeof(*gpio_keys_pdata) + + sizeof(*gpio_keys) * MAX_NBUTTONS, + GFP_KERNEL); + gpio_keys = (void *)(gpio_keys_pdata + 1); + + for (info = button_info; info->name; info++) { + if (info->autorepeat != autorepeat) + continue; + + gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index); + if (gpio < 0) + continue; + + gpio_keys[n_buttons].type = info->event_type; + gpio_keys[n_buttons].code = info->event_code; + gpio_keys[n_buttons].gpio = gpio; + gpio_keys[n_buttons].active_low = 1; + gpio_keys[n_buttons].desc = info->name; + gpio_keys[n_buttons].wakeup = info->wakeup; + n_buttons++; + } + + if (n_buttons == 0) { + error = -ENODEV; + goto err_free_mem; + } + + gpio_keys_pdata->buttons = gpio_keys; + gpio_keys_pdata->nbuttons = n_buttons; + gpio_keys_pdata->rep = autorepeat; + + pd = platform_device_alloc("gpio-keys", PLATFORM_DEVID_AUTO); + if (!pd) { + error = -ENOMEM; + goto err_free_mem; + } + + error = platform_device_add_data(pd, gpio_keys_pdata, + sizeof(*gpio_keys_pdata)); + if (error) + goto err_free_pdev; + + error = platform_device_add(pd); + if (error) + goto err_free_pdev; + + return pd; + +err_free_pdev: + platform_device_put(pd); +err_free_mem: + devm_kfree(&pdev->dev, gpio_keys_pdata); + return ERR_PTR(error); +} + +static void soc_button_remove(struct pnp_dev *pdev) +{ + struct soc_button_data *priv = pnp_get_drvdata(pdev); + int i; + + for (i = 0; i < BUTTON_TYPES; i++) + if (priv->children[i]) + platform_device_unregister(priv->children[i]); +} + +static int soc_button_pnp_probe(struct pnp_dev *pdev, + const struct pnp_device_id *id) +{ + const struct soc_button_info *button_info = (void *)id->driver_data; + struct soc_button_data *priv; + struct platform_device *pd; + int i; + int error; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + pnp_set_drvdata(pdev, priv); + + for (i = 0; i < BUTTON_TYPES; i++) { + pd = soc_button_device_create(pdev, button_info, i == 0); + if (IS_ERR(pd)) { + error = PTR_ERR(pd); + if (error != -ENODEV) { + soc_button_remove(pdev); + return error; + } + } + + priv->children[i] = pd; + } + + if (!priv->children[0] && !priv->children[1]) + return -ENODEV; + + return 0; +} + +static struct soc_button_info soc_button_PNP0C40[] = { + { "power", 0, EV_KEY, KEY_POWER, false, true }, + { "home", 1, EV_KEY, KEY_HOME, false, true }, + { "volume_up", 2, EV_KEY, KEY_VOLUMEUP, true, false }, + { "volume_down", 3, EV_KEY, KEY_VOLUMEDOWN, true, false }, + { "rotation_lock", 4, EV_SW, SW_ROTATE_LOCK, false, false }, + { } +}; + +static const struct pnp_device_id soc_button_pnp_match[] = { + { .id = "PNP0C40", .driver_data = (long)soc_button_PNP0C40 }, + { .id = "" } +}; +MODULE_DEVICE_TABLE(pnp, soc_button_pnp_match); + +static struct pnp_driver soc_button_pnp_driver = { + .name = KBUILD_MODNAME, + .id_table = soc_button_pnp_match, + .probe = soc_button_pnp_probe, + .remove = soc_button_remove, +}; + +static int __init soc_button_init(void) +{ + return pnp_register_driver(&soc_button_pnp_driver); +} + +static void __exit soc_button_exit(void) +{ + pnp_unregister_driver(&soc_button_pnp_driver); +} + +module_init(soc_button_init); +module_exit(soc_button_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 772835938a5..85693624750 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -20,6 +20,8 @@ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> * * Changes/Revisions: + * 0.4 01/09/2014 (Benjamin Tissoires <benjamin.tissoires@redhat.com>) + * - add UI_GET_SYSNAME ioctl * 0.3 09/04/2006 (Anssi Hannula <anssi.hannula@gmail.com>) * - updated ff support for the changes in kernel interface * - added MODULE_VERSION @@ -670,6 +672,31 @@ static int uinput_ff_upload_from_user(const char __user *buffer, __ret; \ }) +static int uinput_str_to_user(void __user *dest, const char *str, + unsigned int maxlen) +{ + char __user *p = dest; + int len, ret; + + if (!str) + return -ENOENT; + + if (maxlen == 0) + return -EINVAL; + + len = strlen(str) + 1; + if (len > maxlen) + len = maxlen; + + ret = copy_to_user(p, str, len); + if (ret) + return -EFAULT; + + /* force terminating '\0' */ + ret = put_user(0, p + len - 1); + return ret ? -EFAULT : len; +} + static long uinput_ioctl_handler(struct file *file, unsigned int cmd, unsigned long arg, void __user *p) { @@ -679,6 +706,8 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, struct uinput_ff_erase ff_erase; struct uinput_request *req; char *phys; + const char *name; + unsigned int size; retval = mutex_lock_interruptible(&udev->mutex); if (retval) @@ -693,51 +722,51 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, switch (cmd) { case UI_DEV_CREATE: retval = uinput_create_device(udev); - break; + goto out; case UI_DEV_DESTROY: uinput_destroy_device(udev); - break; + goto out; case UI_SET_EVBIT: retval = uinput_set_bit(arg, evbit, EV_MAX); - break; + goto out; case UI_SET_KEYBIT: retval = uinput_set_bit(arg, keybit, KEY_MAX); - break; + goto out; case UI_SET_RELBIT: retval = uinput_set_bit(arg, relbit, REL_MAX); - break; + goto out; case UI_SET_ABSBIT: retval = uinput_set_bit(arg, absbit, ABS_MAX); - break; + goto out; case UI_SET_MSCBIT: retval = uinput_set_bit(arg, mscbit, MSC_MAX); - break; + goto out; case UI_SET_LEDBIT: retval = uinput_set_bit(arg, ledbit, LED_MAX); - break; + goto out; case UI_SET_SNDBIT: retval = uinput_set_bit(arg, sndbit, SND_MAX); - break; + goto out; case UI_SET_FFBIT: retval = uinput_set_bit(arg, ffbit, FF_MAX); - break; + goto out; case UI_SET_SWBIT: retval = uinput_set_bit(arg, swbit, SW_MAX); - break; + goto out; case UI_SET_PROPBIT: retval = uinput_set_bit(arg, propbit, INPUT_PROP_MAX); - break; + goto out; case UI_SET_PHYS: if (udev->state == UIST_CREATED) { @@ -753,18 +782,18 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, kfree(udev->dev->phys); udev->dev->phys = phys; - break; + goto out; case UI_BEGIN_FF_UPLOAD: retval = uinput_ff_upload_from_user(p, &ff_up); if (retval) - break; + goto out; req = uinput_request_find(udev, ff_up.request_id); if (!req || req->code != UI_FF_UPLOAD || !req->u.upload.effect) { retval = -EINVAL; - break; + goto out; } ff_up.retval = 0; @@ -775,65 +804,77 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd, memset(&ff_up.old, 0, sizeof(struct ff_effect)); retval = uinput_ff_upload_to_user(p, &ff_up); - break; + goto out; case UI_BEGIN_FF_ERASE: if (copy_from_user(&ff_erase, p, sizeof(ff_erase))) { retval = -EFAULT; - break; + goto out; } req = uinput_request_find(udev, ff_erase.request_id); if (!req || req->code != UI_FF_ERASE) { retval = -EINVAL; - break; + goto out; } ff_erase.retval = 0; ff_erase.effect_id = req->u.effect_id; if (copy_to_user(p, &ff_erase, sizeof(ff_erase))) { retval = -EFAULT; - break; + goto out; } - break; + goto out; case UI_END_FF_UPLOAD: retval = uinput_ff_upload_from_user(p, &ff_up); if (retval) - break; + goto out; req = uinput_request_find(udev, ff_up.request_id); if (!req || req->code != UI_FF_UPLOAD || !req->u.upload.effect) { retval = -EINVAL; - break; + goto out; } req->retval = ff_up.retval; uinput_request_done(udev, req); - break; + goto out; case UI_END_FF_ERASE: if (copy_from_user(&ff_erase, p, sizeof(ff_erase))) { retval = -EFAULT; - break; + goto out; } req = uinput_request_find(udev, ff_erase.request_id); if (!req || req->code != UI_FF_ERASE) { retval = -EINVAL; - break; + goto out; } req->retval = ff_erase.retval; uinput_request_done(udev, req); - break; + goto out; + } - default: - retval = -EINVAL; + size = _IOC_SIZE(cmd); + + /* Now check variable-length commands */ + switch (cmd & ~IOCSIZE_MASK) { + case UI_GET_SYSNAME(0): + if (udev->state != UIST_CREATED) { + retval = -ENOENT; + goto out; + } + name = dev_name(&udev->dev->dev); + retval = uinput_str_to_user(p, name, size); + goto out; } + retval = -EINVAL; out: mutex_unlock(&udev->mutex); return retval; diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index b6505454bcc..7b7add5061a 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -277,6 +277,16 @@ static struct key_entry keymap_fs_amilo_pro_v3505[] __initdata = { { KE_END, 0 } }; +static struct key_entry keymap_fs_amilo_pro_v8210[] __initdata = { + { KE_KEY, 0x01, {KEY_HELP} }, /* Fn+F1 */ + { KE_KEY, 0x06, {KEY_DISPLAYTOGGLE} }, /* Fn+F4 */ + { KE_BLUETOOTH, 0x30 }, /* Fn+F10 */ + { KE_KEY, 0x31, {KEY_MAIL} }, /* mail button */ + { KE_KEY, 0x36, {KEY_WWW} }, /* www button */ + { KE_WIFI, 0x78 }, /* satelite dish button */ + { KE_END, FE_WIFI_LED } +}; + static struct key_entry keymap_fujitsu_n3510[] __initdata = { { KE_KEY, 0x11, {KEY_PROG1} }, { KE_KEY, 0x12, {KEY_PROG2} }, @@ -654,6 +664,15 @@ static const struct dmi_system_id dmi_ids[] __initconst = { .driver_data = keymap_fs_amilo_pro_v3505 }, { + /* Fujitsu-Siemens Amilo Pro Edition V8210 */ + .callback = dmi_matched, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro Series V8210"), + }, + .driver_data = keymap_fs_amilo_pro_v8210 + }, + { /* Fujitsu-Siemens Amilo M7400 */ .callback = dmi_matched, .matches = { diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 800ca7dfafc..ef234c9b2f2 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -48,6 +48,7 @@ struct atp_info { int yfact; /* Y multiplication factor */ int datalen; /* size of USB transfers */ void (*callback)(struct urb *); /* callback function */ + int fuzz; /* fuzz touchpad generates */ }; static void atp_complete_geyser_1_2(struct urb *urb); @@ -61,6 +62,7 @@ static const struct atp_info fountain_info = { .yfact = 43, .datalen = 81, .callback = atp_complete_geyser_1_2, + .fuzz = 16, }; static const struct atp_info geyser1_info = { @@ -71,6 +73,7 @@ static const struct atp_info geyser1_info = { .yfact = 43, .datalen = 81, .callback = atp_complete_geyser_1_2, + .fuzz = 16, }; static const struct atp_info geyser2_info = { @@ -81,6 +84,7 @@ static const struct atp_info geyser2_info = { .yfact = 43, .datalen = 64, .callback = atp_complete_geyser_1_2, + .fuzz = 0, }; static const struct atp_info geyser3_info = { @@ -90,6 +94,7 @@ static const struct atp_info geyser3_info = { .yfact = 64, .datalen = 64, .callback = atp_complete_geyser_3_4, + .fuzz = 0, }; static const struct atp_info geyser4_info = { @@ -99,6 +104,7 @@ static const struct atp_info geyser4_info = { .yfact = 64, .datalen = 64, .callback = atp_complete_geyser_3_4, + .fuzz = 0, }; #define ATP_DEVICE(prod, info) \ @@ -155,8 +161,11 @@ MODULE_DEVICE_TABLE(usb, atp_table); #define ATP_XSENSORS 26 #define ATP_YSENSORS 16 -/* amount of fuzz this touchpad generates */ -#define ATP_FUZZ 16 +/* + * The largest possible bank of sensors with additional buffer of 4 extra values + * on either side, for an array of smoothed sensor values. + */ +#define ATP_SMOOTHSIZE 34 /* maximum pressure this driver will report */ #define ATP_PRESSURE 300 @@ -165,7 +174,13 @@ MODULE_DEVICE_TABLE(usb, atp_table); * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is * ignored. */ -#define ATP_THRESHOLD 5 +#define ATP_THRESHOLD 5 + +/* + * How far we'll bitshift our sensor values before averaging them. Mitigates + * rounding errors. + */ +#define ATP_SCALE 12 /* Geyser initialization constants */ #define ATP_GEYSER_MODE_READ_REQUEST_ID 1 @@ -203,11 +218,14 @@ struct atp { bool valid; /* are the samples valid? */ bool size_detect_done; bool overflow_warned; + int fingers_old; /* last reported finger count */ int x_old; /* last reported x/y, */ int y_old; /* used for smoothing */ signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; + int smooth[ATP_SMOOTHSIZE]; + int smooth_tmp[ATP_SMOOTHSIZE]; int idlecount; /* number of empty packets */ struct work_struct work; }; @@ -326,10 +344,17 @@ static void atp_reinit(struct work_struct *work) retval); } -static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, - int *z, int *fingers) +static int atp_calculate_abs(struct atp *dev, int offset, int nb_sensors, + int fact, int *z, int *fingers) { - int i; + int i, pass; + + /* + * Use offset to point xy_sensors at the first value in dev->xy_acc + * for whichever dimension we're looking at this particular go-round. + */ + int *xy_sensors = dev->xy_acc + offset; + /* values to calculate mean */ int pcum = 0, psum = 0; int is_increasing = 0; @@ -341,9 +366,6 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, if (is_increasing) is_increasing = 0; - continue; - } - /* * Makes the finger detection more versatile. For example, * two fingers with no gap will be detected. Also, my @@ -358,27 +380,63 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, * * - Jason Parekh <jasonparekh@gmail.com> */ - if (i < 1 || + + } else if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) { (*fingers)++; is_increasing = 1; } else if (i > 0 && (xy_sensors[i - 1] - xy_sensors[i] > threshold)) { is_increasing = 0; } + } + + if (*fingers < 1) /* No need to continue if no fingers are found. */ + return 0; + /* + * Use a smoothed version of sensor data for movement calculations, to + * combat noise without needing to rely so heavily on a threshold. + * This improves tracking. + * + * The smoothed array is bigger than the original so that the smoothing + * doesn't result in edge values being truncated. + */ + + memset(dev->smooth, 0, 4 * sizeof(dev->smooth[0])); + /* Pull base values, scaled up to help avoid truncation errors. */ + for (i = 0; i < nb_sensors; i++) + dev->smooth[i + 4] = xy_sensors[i] << ATP_SCALE; + memset(&dev->smooth[nb_sensors + 4], 0, 4 * sizeof(dev->smooth[0])); + + for (pass = 0; pass < 4; pass++) { + /* Handle edge. */ + dev->smooth_tmp[0] = (dev->smooth[0] + dev->smooth[1]) / 2; + + /* Average values with neighbors. */ + for (i = 1; i < nb_sensors + 7; i++) + dev->smooth_tmp[i] = (dev->smooth[i - 1] + + dev->smooth[i] * 2 + + dev->smooth[i + 1]) / 4; + + /* Handle other edge. */ + dev->smooth_tmp[i] = (dev->smooth[i - 1] + dev->smooth[i]) / 2; + + memcpy(dev->smooth, dev->smooth_tmp, sizeof(dev->smooth)); + } + + for (i = 0; i < nb_sensors + 8; i++) { /* - * Subtracts threshold so a high sensor that just passes the - * threshold won't skew the calculated absolute coordinate. - * Fixes an issue where slowly moving the mouse would - * occasionally jump a number of pixels (slowly moving the - * finger makes this issue most apparent.) + * Skip values if they're small enough to be truncated to 0 + * by scale. Mostly noise. */ - pcum += (xy_sensors[i] - threshold) * i; - psum += (xy_sensors[i] - threshold); + if ((dev->smooth[i] >> ATP_SCALE) > 0) { + pcum += dev->smooth[i] * i; + psum += dev->smooth[i]; + } } if (psum > 0) { - *z = psum; + *z = psum >> ATP_SCALE; /* Scale down pressure output. */ return pcum * fact / psum; } @@ -455,7 +513,7 @@ static void atp_detect_size(struct atp *dev) input_set_abs_params(dev->input, ABS_X, 0, (dev->info->xsensors_17 - 1) * dev->info->xfact - 1, - ATP_FUZZ, 0); + dev->info->fuzz, 0); break; } } @@ -471,7 +529,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; - int key; + int key, fingers; struct atp *dev = urb->context; int status = atp_status_check(urb); @@ -548,16 +606,18 @@ static void atp_complete_geyser_1_2(struct urb *urb) dbg_dump("accumulator", dev->xy_acc); - x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + x = atp_calculate_abs(dev, 0, ATP_XSENSORS, dev->info->xfact, &x_z, &x_f); - y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + y = atp_calculate_abs(dev, ATP_XSENSORS, ATP_YSENSORS, dev->info->yfact, &y_z, &y_f); key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON; - if (x && y) { + fingers = max(x_f, y_f); + + if (x && y && fingers == dev->fingers_old) { if (dev->x_old != -1) { - x = (dev->x_old * 3 + x) >> 2; - y = (dev->y_old * 3 + y) >> 2; + x = (dev->x_old * 7 + x) >> 3; + y = (dev->y_old * 7 + y) >> 3; dev->x_old = x; dev->y_old = y; @@ -571,7 +631,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) input_report_abs(dev->input, ABS_Y, y); input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, fingers); } dev->x_old = x; dev->y_old = y; @@ -579,6 +639,7 @@ static void atp_complete_geyser_1_2(struct urb *urb) } else if (!x && !y) { dev->x_old = dev->y_old = -1; + dev->fingers_old = 0; input_report_key(dev->input, BTN_TOUCH, 0); input_report_abs(dev->input, ABS_PRESSURE, 0); atp_report_fingers(dev->input, 0); @@ -587,6 +648,10 @@ static void atp_complete_geyser_1_2(struct urb *urb) memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } + if (fingers != dev->fingers_old) + dev->x_old = dev->y_old = -1; + dev->fingers_old = fingers; + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); @@ -604,7 +669,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; - int key; + int key, fingers; struct atp *dev = urb->context; int status = atp_status_check(urb); @@ -660,16 +725,19 @@ static void atp_complete_geyser_3_4(struct urb *urb) dbg_dump("accumulator", dev->xy_acc); - x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + x = atp_calculate_abs(dev, 0, ATP_XSENSORS, dev->info->xfact, &x_z, &x_f); - y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + y = atp_calculate_abs(dev, ATP_XSENSORS, ATP_YSENSORS, dev->info->yfact, &y_z, &y_f); + key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON; - if (x && y) { + fingers = max(x_f, y_f); + + if (x && y && fingers == dev->fingers_old) { if (dev->x_old != -1) { - x = (dev->x_old * 3 + x) >> 2; - y = (dev->y_old * 3 + y) >> 2; + x = (dev->x_old * 7 + x) >> 3; + y = (dev->y_old * 7 + y) >> 3; dev->x_old = x; dev->y_old = y; @@ -683,7 +751,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) input_report_abs(dev->input, ABS_Y, y); input_report_abs(dev->input, ABS_PRESSURE, min(ATP_PRESSURE, x_z + y_z)); - atp_report_fingers(dev->input, max(x_f, y_f)); + atp_report_fingers(dev->input, fingers); } dev->x_old = x; dev->y_old = y; @@ -691,6 +759,7 @@ static void atp_complete_geyser_3_4(struct urb *urb) } else if (!x && !y) { dev->x_old = dev->y_old = -1; + dev->fingers_old = 0; input_report_key(dev->input, BTN_TOUCH, 0); input_report_abs(dev->input, ABS_PRESSURE, 0); atp_report_fingers(dev->input, 0); @@ -699,6 +768,10 @@ static void atp_complete_geyser_3_4(struct urb *urb) memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); } + if (fingers != dev->fingers_old) + dev->x_old = dev->y_old = -1; + dev->fingers_old = fingers; + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); @@ -843,10 +916,10 @@ static int atp_probe(struct usb_interface *iface, input_set_abs_params(input_dev, ABS_X, 0, (dev->info->xsensors - 1) * dev->info->xfact - 1, - ATP_FUZZ, 0); + dev->info->fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, (dev->info->ysensors - 1) * dev->info->yfact - 1, - ATP_FUZZ, 0); + dev->info->fuzz, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); set_bit(EV_KEY, input_dev->evbit); diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index aec54e28358..bc2d47431bd 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -263,7 +263,7 @@ config SERIO_APBPS2 config SERIO_OLPC_APSP tristate "OLPC AP-SP input support" - depends on OF + depends on OLPC || COMPILE_TEST help Say Y here if you want support for the keyboard and touchpad included in the OLPC XO-1.75 and XO-4 laptops. diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index d7a7e54f646..852858e5d8d 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -984,7 +984,7 @@ static void hp_sdc_exit(void) free_irq(hp_sdc.irq, &hp_sdc); write_unlock_irq(&hp_sdc.lock); - del_timer(&hp_sdc.kicker); + del_timer_sync(&hp_sdc.kicker); tasklet_kill(&hp_sdc.task); diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index caecffe8caf..858045694e9 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -848,7 +848,7 @@ static int gtco_probe(struct usb_interface *usbinterface, gtco->inputdevice = input_dev; /* Save interface information */ - gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface)); + gtco->usbdev = interface_to_usbdev(usbinterface); gtco->intf = usbinterface; /* Allocate some data for incoming reports */ diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 07e9e82029d..68edc9db2c6 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -514,15 +514,6 @@ config TOUCHSCREEN_MIGOR To compile this driver as a module, choose M here: the module will be called migor_ts. -config TOUCHSCREEN_TNETV107X - tristate "TI TNETV107X touchscreen support" - depends on ARCH_DAVINCI_TNETV107X - help - Say Y here if you want to use the TNETV107X touchscreen. - - To compile this driver as a module, choose M here: the - module will be called tnetv107x-ts. - config TOUCHSCREEN_TOUCHRIGHT tristate "Touchright serial touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 62801f21334..4bc954b7c7c 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o -obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 412a85ec9ba..f8815bebc9e 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1,5 +1,7 @@ /* * Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de> + * Daniel Wagener <daniel.wagener@kernelconcepts.de> (M09 firmware support) + * Lothar Waßmann <LW@KARO-electronics.de> (DT support) * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -33,6 +35,7 @@ #include <linux/debugfs.h> #include <linux/slab.h> #include <linux/gpio.h> +#include <linux/of_gpio.h> #include <linux/input/mt.h> #include <linux/input/edt-ft5x06.h> @@ -45,6 +48,14 @@ #define WORK_REGISTER_NUM_X 0x33 #define WORK_REGISTER_NUM_Y 0x34 +#define M09_REGISTER_THRESHOLD 0x80 +#define M09_REGISTER_GAIN 0x92 +#define M09_REGISTER_OFFSET 0x93 +#define M09_REGISTER_NUM_X 0x94 +#define M09_REGISTER_NUM_Y 0x95 + +#define NO_REGISTER 0xff + #define WORK_REGISTER_OPMODE 0x3c #define FACTORY_REGISTER_OPMODE 0x01 @@ -59,12 +70,30 @@ #define EDT_RAW_DATA_RETRIES 100 #define EDT_RAW_DATA_DELAY 1 /* msec */ +enum edt_ver { + M06, + M09, +}; + +struct edt_reg_addr { + int reg_threshold; + int reg_report_rate; + int reg_gain; + int reg_offset; + int reg_num_x; + int reg_num_y; +}; + struct edt_ft5x06_ts_data { struct i2c_client *client; struct input_dev *input; u16 num_x; u16 num_y; + int reset_pin; + int irq_pin; + int wake_pin; + #if defined(CONFIG_DEBUG_FS) struct dentry *debug_dir; u8 *raw_buffer; @@ -79,6 +108,9 @@ struct edt_ft5x06_ts_data { int report_rate; char name[EDT_NAME_LEN]; + + struct edt_reg_addr reg_addr; + enum edt_ver version; }; static int edt_ft5x06_ts_readwrite(struct i2c_client *client, @@ -136,33 +168,58 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) { struct edt_ft5x06_ts_data *tsdata = dev_id; struct device *dev = &tsdata->client->dev; - u8 cmd = 0xf9; - u8 rdbuf[26]; + u8 cmd; + u8 rdbuf[29]; int i, type, x, y, id; + int offset, tplen, datalen; int error; + switch (tsdata->version) { + case M06: + cmd = 0xf9; /* tell the controller to send touch data */ + offset = 5; /* where the actual touch data starts */ + tplen = 4; /* data comes in so called frames */ + datalen = 26; /* how much bytes to listen for */ + break; + + case M09: + cmd = 0x02; + offset = 1; + tplen = 6; + datalen = 29; + break; + + default: + goto out; + } + memset(rdbuf, 0, sizeof(rdbuf)); error = edt_ft5x06_ts_readwrite(tsdata->client, sizeof(cmd), &cmd, - sizeof(rdbuf), rdbuf); + datalen, rdbuf); if (error) { dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n", error); goto out; } - if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != 26) { - dev_err_ratelimited(dev, "Unexpected header: %02x%02x%02x!\n", - rdbuf[0], rdbuf[1], rdbuf[2]); - goto out; - } + /* M09 does not send header or CRC */ + if (tsdata->version == M06) { + if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || + rdbuf[2] != datalen) { + dev_err_ratelimited(dev, + "Unexpected header: %02x%02x%02x!\n", + rdbuf[0], rdbuf[1], rdbuf[2]); + goto out; + } - if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, 26)) - goto out; + if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen)) + goto out; + } for (i = 0; i < MAX_SUPPORT_POINTS; i++) { - u8 *buf = &rdbuf[i * 4 + 5]; + u8 *buf = &rdbuf[i * tplen + offset]; bool down; type = buf[0] >> 6; @@ -170,10 +227,14 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id) if (type == TOUCH_EVENT_RESERVED) continue; + /* M06 sometimes sends bogus coordinates in TOUCH_DOWN */ + if (tsdata->version == M06 && type == TOUCH_EVENT_DOWN) + continue; + x = ((buf[0] << 8) | buf[1]) & 0x0fff; y = ((buf[2] << 8) | buf[3]) & 0x0fff; id = (buf[2] >> 4) & 0x0f; - down = (type != TOUCH_EVENT_UP); + down = type != TOUCH_EVENT_UP; input_mt_slot(tsdata->input, id); input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, down); @@ -197,12 +258,25 @@ static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata, { u8 wrbuf[4]; - wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; - wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; - wrbuf[2] = value; - wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2]; - - return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL); + switch (tsdata->version) { + case M06: + wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; + wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; + wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; + wrbuf[2] = value; + wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2]; + return edt_ft5x06_ts_readwrite(tsdata->client, 4, + wrbuf, 0, NULL); + case M09: + wrbuf[0] = addr; + wrbuf[1] = value; + + return edt_ft5x06_ts_readwrite(tsdata->client, 3, + wrbuf, 0, NULL); + + default: + return -EINVAL; + } } static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, @@ -211,19 +285,36 @@ static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata, u8 wrbuf[2], rdbuf[2]; int error; - wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; - wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; - wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40; + switch (tsdata->version) { + case M06: + wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc; + wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f; + wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40; - error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2, rdbuf); - if (error) - return error; + error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2, + rdbuf); + if (error) + return error; - if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) { - dev_err(&tsdata->client->dev, - "crc error: 0x%02x expected, got 0x%02x\n", - wrbuf[0] ^ wrbuf[1] ^ rdbuf[0], rdbuf[1]); - return -EIO; + if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) { + dev_err(&tsdata->client->dev, + "crc error: 0x%02x expected, got 0x%02x\n", + wrbuf[0] ^ wrbuf[1] ^ rdbuf[0], + rdbuf[1]); + return -EIO; + } + break; + + case M09: + wrbuf[0] = addr; + error = edt_ft5x06_ts_readwrite(tsdata->client, 1, + wrbuf, 1, rdbuf); + if (error) + return error; + break; + + default: + return -EINVAL; } return rdbuf[0]; @@ -234,19 +325,21 @@ struct edt_ft5x06_attribute { size_t field_offset; u8 limit_low; u8 limit_high; - u8 addr; + u8 addr_m06; + u8 addr_m09; }; -#define EDT_ATTR(_field, _mode, _addr, _limit_low, _limit_high) \ +#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09, \ + _limit_low, _limit_high) \ struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = { \ .dattr = __ATTR(_field, _mode, \ edt_ft5x06_setting_show, \ edt_ft5x06_setting_store), \ - .field_offset = \ - offsetof(struct edt_ft5x06_ts_data, _field), \ + .field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \ + .addr_m06 = _addr_m06, \ + .addr_m09 = _addr_m09, \ .limit_low = _limit_low, \ .limit_high = _limit_high, \ - .addr = _addr, \ } static ssize_t edt_ft5x06_setting_show(struct device *dev, @@ -257,10 +350,11 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client); struct edt_ft5x06_attribute *attr = container_of(dattr, struct edt_ft5x06_attribute, dattr); - u8 *field = (u8 *)((char *)tsdata + attr->field_offset); + u8 *field = (u8 *)tsdata + attr->field_offset; int val; size_t count = 0; int error = 0; + u8 addr; mutex_lock(&tsdata->mutex); @@ -269,15 +363,33 @@ static ssize_t edt_ft5x06_setting_show(struct device *dev, goto out; } - val = edt_ft5x06_register_read(tsdata, attr->addr); - if (val < 0) { - error = val; - dev_err(&tsdata->client->dev, - "Failed to fetch attribute %s, error %d\n", - dattr->attr.name, error); + switch (tsdata->version) { + case M06: + addr = attr->addr_m06; + break; + + case M09: + addr = attr->addr_m09; + break; + + default: + error = -ENODEV; goto out; } + if (addr != NO_REGISTER) { + val = edt_ft5x06_register_read(tsdata, addr); + if (val < 0) { + error = val; + dev_err(&tsdata->client->dev, + "Failed to fetch attribute %s, error %d\n", + dattr->attr.name, error); + goto out; + } + } else { + val = *field; + } + if (val != *field) { dev_warn(&tsdata->client->dev, "%s: read (%d) and stored value (%d) differ\n", @@ -299,9 +411,10 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev, struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client); struct edt_ft5x06_attribute *attr = container_of(dattr, struct edt_ft5x06_attribute, dattr); - u8 *field = (u8 *)((char *)tsdata + attr->field_offset); + u8 *field = (u8 *)tsdata + attr->field_offset; unsigned int val; int error; + u8 addr; mutex_lock(&tsdata->mutex); @@ -319,14 +432,29 @@ static ssize_t edt_ft5x06_setting_store(struct device *dev, goto out; } - error = edt_ft5x06_register_write(tsdata, attr->addr, val); - if (error) { - dev_err(&tsdata->client->dev, - "Failed to update attribute %s, error: %d\n", - dattr->attr.name, error); + switch (tsdata->version) { + case M06: + addr = attr->addr_m06; + break; + + case M09: + addr = attr->addr_m09; + break; + + default: + error = -ENODEV; goto out; } + if (addr != NO_REGISTER) { + error = edt_ft5x06_register_write(tsdata, addr, val); + if (error) { + dev_err(&tsdata->client->dev, + "Failed to update attribute %s, error: %d\n", + dattr->attr.name, error); + goto out; + } + } *field = val; out: @@ -334,12 +462,14 @@ out: return error ?: count; } -static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, 0, 31); -static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, 0, 31); -static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, - WORK_REGISTER_THRESHOLD, 20, 80); -static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, - WORK_REGISTER_REPORT_RATE, 3, 14); +static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, + M09_REGISTER_GAIN, 0, 31); +static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, + M09_REGISTER_OFFSET, 0, 31); +static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD, + M09_REGISTER_THRESHOLD, 20, 80); +static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE, + NO_REGISTER, 3, 14); static struct attribute *edt_ft5x06_attrs[] = { &edt_ft5x06_attr_gain.dattr.attr, @@ -374,6 +504,9 @@ static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata) } /* mode register is 0x3c when in the work mode */ + if (tsdata->version == M09) + goto m09_out; + error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03); if (error) { dev_err(&client->dev, @@ -406,12 +539,18 @@ err_out: enable_irq(client->irq); return error; + +m09_out: + dev_err(&client->dev, "No factory mode support for M09\n"); + return -EINVAL; + } static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata) { struct i2c_client *client = tsdata->client; int retries = EDT_SWITCH_MODE_RETRIES; + struct edt_reg_addr *reg_addr = &tsdata->reg_addr; int ret; int error; @@ -444,13 +583,14 @@ static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata) tsdata->raw_buffer = NULL; /* restore parameters */ - edt_ft5x06_register_write(tsdata, WORK_REGISTER_THRESHOLD, + edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold, tsdata->threshold); - edt_ft5x06_register_write(tsdata, WORK_REGISTER_GAIN, + edt_ft5x06_register_write(tsdata, reg_addr->reg_gain, tsdata->gain); - edt_ft5x06_register_write(tsdata, WORK_REGISTER_OFFSET, + edt_ft5x06_register_write(tsdata, reg_addr->reg_offset, tsdata->offset); - edt_ft5x06_register_write(tsdata, WORK_REGISTER_REPORT_RATE, + if (reg_addr->reg_report_rate) + edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate, tsdata->report_rate); enable_irq(client->irq); @@ -479,7 +619,7 @@ static int edt_ft5x06_debugfs_mode_set(void *data, u64 mode) if (mode != tsdata->factory_mode) { retval = mode ? edt_ft5x06_factory_mode(tsdata) : - edt_ft5x06_work_mode(tsdata); + edt_ft5x06_work_mode(tsdata); } mutex_unlock(&tsdata->mutex); @@ -568,7 +708,6 @@ out: return error ?: read; }; - static const struct file_operations debugfs_raw_data_fops = { .open = simple_open, .read = edt_ft5x06_debugfs_raw_data_read, @@ -614,58 +753,100 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) #endif /* CONFIG_DEBUGFS */ - - static int edt_ft5x06_ts_reset(struct i2c_client *client, - int reset_pin) + struct edt_ft5x06_ts_data *tsdata) { int error; - if (gpio_is_valid(reset_pin)) { + if (gpio_is_valid(tsdata->wake_pin)) { + error = devm_gpio_request_one(&client->dev, + tsdata->wake_pin, GPIOF_OUT_INIT_LOW, + "edt-ft5x06 wake"); + if (error) { + dev_err(&client->dev, + "Failed to request GPIO %d as wake pin, error %d\n", + tsdata->wake_pin, error); + return error; + } + + msleep(5); + gpio_set_value(tsdata->wake_pin, 1); + } + if (gpio_is_valid(tsdata->reset_pin)) { /* this pulls reset down, enabling the low active reset */ - error = devm_gpio_request_one(&client->dev, reset_pin, - GPIOF_OUT_INIT_LOW, - "edt-ft5x06 reset"); + error = devm_gpio_request_one(&client->dev, + tsdata->reset_pin, GPIOF_OUT_INIT_LOW, + "edt-ft5x06 reset"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d as reset pin, error %d\n", - reset_pin, error); + tsdata->reset_pin, error); return error; } - mdelay(50); - gpio_set_value(reset_pin, 1); - mdelay(100); + msleep(5); + gpio_set_value(tsdata->reset_pin, 1); + msleep(300); } return 0; } static int edt_ft5x06_ts_identify(struct i2c_client *client, - char *model_name, - char *fw_version) + struct edt_ft5x06_ts_data *tsdata, + char *fw_version) { u8 rdbuf[EDT_NAME_LEN]; char *p; int error; + char *model_name = tsdata->name; + /* see what we find if we assume it is a M06 * + * if we get less than EDT_NAME_LEN, we don't want + * to have garbage in there + */ + memset(rdbuf, 0, sizeof(rdbuf)); error = edt_ft5x06_ts_readwrite(client, 1, "\xbb", EDT_NAME_LEN - 1, rdbuf); if (error) return error; - /* remove last '$' end marker */ - rdbuf[EDT_NAME_LEN - 1] = '\0'; - if (rdbuf[EDT_NAME_LEN - 2] == '$') - rdbuf[EDT_NAME_LEN - 2] = '\0'; + /* if we find something consistent, stay with that assumption + * at least M09 won't send 3 bytes here + */ + if (!(strnicmp(rdbuf + 1, "EP0", 3))) { + tsdata->version = M06; + + /* remove last '$' end marker */ + rdbuf[EDT_NAME_LEN - 1] = '\0'; + if (rdbuf[EDT_NAME_LEN - 2] == '$') + rdbuf[EDT_NAME_LEN - 2] = '\0'; + + /* look for Model/Version separator */ + p = strchr(rdbuf, '*'); + if (p) + *p++ = '\0'; + strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN); + strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); + } else { + /* since there are only two versions around (M06, M09) */ + tsdata->version = M09; + + error = edt_ft5x06_ts_readwrite(client, 1, "\xA6", + 2, rdbuf); + if (error) + return error; + + strlcpy(fw_version, rdbuf, 2); - /* look for Model/Version separator */ - p = strchr(rdbuf, '*'); - if (p) - *p++ = '\0'; + error = edt_ft5x06_ts_readwrite(client, 1, "\xA8", + 1, rdbuf); + if (error) + return error; - strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN); - strlcpy(fw_version, p ? p : "", EDT_NAME_LEN); + snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09", + rdbuf[0] >> 4, rdbuf[0] & 0x0F); + } return 0; } @@ -675,33 +856,104 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, pdata->name <= edt_ft5x06_attr_##name.limit_high) \ edt_ft5x06_register_write(tsdata, reg, pdata->name) +#define EDT_GET_PROP(name, reg) { \ + u32 val; \ + if (of_property_read_u32(np, #name, &val) == 0) \ + edt_ft5x06_register_write(tsdata, reg, val); \ +} + +static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np, + struct edt_ft5x06_ts_data *tsdata) +{ + struct edt_reg_addr *reg_addr = &tsdata->reg_addr; + + EDT_GET_PROP(threshold, reg_addr->reg_threshold); + EDT_GET_PROP(gain, reg_addr->reg_gain); + EDT_GET_PROP(offset, reg_addr->reg_offset); +} + static void edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata, const struct edt_ft5x06_platform_data *pdata) { + struct edt_reg_addr *reg_addr = &tsdata->reg_addr; + if (!pdata->use_parameters) return; /* pick up defaults from the platform data */ - EDT_ATTR_CHECKSET(threshold, WORK_REGISTER_THRESHOLD); - EDT_ATTR_CHECKSET(gain, WORK_REGISTER_GAIN); - EDT_ATTR_CHECKSET(offset, WORK_REGISTER_OFFSET); - EDT_ATTR_CHECKSET(report_rate, WORK_REGISTER_REPORT_RATE); + EDT_ATTR_CHECKSET(threshold, reg_addr->reg_threshold); + EDT_ATTR_CHECKSET(gain, reg_addr->reg_gain); + EDT_ATTR_CHECKSET(offset, reg_addr->reg_offset); + if (reg_addr->reg_report_rate != NO_REGISTER) + EDT_ATTR_CHECKSET(report_rate, reg_addr->reg_report_rate); } static void edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) { + struct edt_reg_addr *reg_addr = &tsdata->reg_addr; + tsdata->threshold = edt_ft5x06_register_read(tsdata, - WORK_REGISTER_THRESHOLD); - tsdata->gain = edt_ft5x06_register_read(tsdata, WORK_REGISTER_GAIN); - tsdata->offset = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OFFSET); - tsdata->report_rate = edt_ft5x06_register_read(tsdata, - WORK_REGISTER_REPORT_RATE); - tsdata->num_x = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_X); - tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y); + reg_addr->reg_threshold); + tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain); + tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset); + if (reg_addr->reg_report_rate != NO_REGISTER) + tsdata->report_rate = edt_ft5x06_register_read(tsdata, + reg_addr->reg_report_rate); + tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x); + tsdata->num_y = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_y); +} + +static void +edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata) +{ + struct edt_reg_addr *reg_addr = &tsdata->reg_addr; + + switch (tsdata->version) { + case M06: + reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD; + reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE; + reg_addr->reg_gain = WORK_REGISTER_GAIN; + reg_addr->reg_offset = WORK_REGISTER_OFFSET; + reg_addr->reg_num_x = WORK_REGISTER_NUM_X; + reg_addr->reg_num_y = WORK_REGISTER_NUM_Y; + break; + + case M09: + reg_addr->reg_threshold = M09_REGISTER_THRESHOLD; + reg_addr->reg_gain = M09_REGISTER_GAIN; + reg_addr->reg_offset = M09_REGISTER_OFFSET; + reg_addr->reg_num_x = M09_REGISTER_NUM_X; + reg_addr->reg_num_y = M09_REGISTER_NUM_Y; + break; + } } +#ifdef CONFIG_OF +static int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_ts_data *tsdata) +{ + struct device_node *np = dev->of_node; + + /* + * irq_pin is not needed for DT setup. + * irq is associated via 'interrupts' property in DT + */ + tsdata->irq_pin = -EINVAL; + tsdata->reset_pin = of_get_named_gpio(np, "reset-gpios", 0); + tsdata->wake_pin = of_get_named_gpio(np, "wake-gpios", 0); + + return 0; +} +#else +static inline int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_ts_data *tsdata) +{ + return -ENODEV; +} +#endif + static int edt_ft5x06_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -714,32 +966,40 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n"); + tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) { + dev_err(&client->dev, "failed to allocate driver data.\n"); + return -ENOMEM; + } + if (!pdata) { - dev_err(&client->dev, "no platform data?\n"); - return -EINVAL; + error = edt_ft5x06_i2c_ts_probe_dt(&client->dev, tsdata); + if (error) { + dev_err(&client->dev, + "DT probe failed and no platform data present\n"); + return error; + } + } else { + tsdata->reset_pin = pdata->reset_pin; + tsdata->irq_pin = pdata->irq_pin; + tsdata->wake_pin = -EINVAL; } - error = edt_ft5x06_ts_reset(client, pdata->reset_pin); + error = edt_ft5x06_ts_reset(client, tsdata); if (error) return error; - if (gpio_is_valid(pdata->irq_pin)) { - error = devm_gpio_request_one(&client->dev, pdata->irq_pin, - GPIOF_IN, "edt-ft5x06 irq"); + if (gpio_is_valid(tsdata->irq_pin)) { + error = devm_gpio_request_one(&client->dev, tsdata->irq_pin, + GPIOF_IN, "edt-ft5x06 irq"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d, error %d\n", - pdata->irq_pin, error); + tsdata->irq_pin, error); return error; } } - tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); - if (!tsdata) { - dev_err(&client->dev, "failed to allocate driver data.\n"); - return -ENOMEM; - } - input = devm_input_allocate_device(&client->dev); if (!input) { dev_err(&client->dev, "failed to allocate input device.\n"); @@ -751,13 +1011,19 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, tsdata->input = input; tsdata->factory_mode = false; - error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version); + error = edt_ft5x06_ts_identify(client, tsdata, fw_version); if (error) { dev_err(&client->dev, "touchscreen probe failed\n"); return error; } - edt_ft5x06_ts_get_defaults(tsdata, pdata); + edt_ft5x06_ts_set_regs(tsdata); + + if (!pdata) + edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata); + else + edt_ft5x06_ts_get_defaults(tsdata, pdata); + edt_ft5x06_ts_get_parameters(tsdata); dev_dbg(&client->dev, @@ -787,10 +1053,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input_set_drvdata(input, tsdata); i2c_set_clientdata(client, tsdata); - error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, edt_ft5x06_ts_isr, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - client->name, tsdata); + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + edt_ft5x06_ts_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->name, tsdata); if (error) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); return error; @@ -801,19 +1067,21 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return error; error = input_register_device(input); - if (error) { - sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group); - return error; - } + if (error) + goto err_remove_attrs; edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev)); device_init_wakeup(&client->dev, 1); dev_dbg(&client->dev, - "EDT FT5x06 initialized: IRQ pin %d, Reset pin %d.\n", - pdata->irq_pin, pdata->reset_pin); + "EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n", + client->irq, tsdata->wake_pin, tsdata->reset_pin); return 0; + +err_remove_attrs: + sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group); + return error; } static int edt_ft5x06_ts_remove(struct i2c_client *client) @@ -852,15 +1120,26 @@ static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops, edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume); static const struct i2c_device_id edt_ft5x06_ts_id[] = { - { "edt-ft5x06", 0 }, - { } + { "edt-ft5x06", 0, }, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id); +#ifdef CONFIG_OF +static const struct of_device_id edt_ft5x06_of_match[] = { + { .compatible = "edt,edt-ft5206", }, + { .compatible = "edt,edt-ft5306", }, + { .compatible = "edt,edt-ft5406", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match); +#endif + static struct i2c_driver edt_ft5x06_ts_driver = { .driver = { .owner = THIS_MODULE, .name = "edt_ft5x06", + .of_match_table = of_match_ptr(edt_ft5x06_of_match), .pm = &edt_ft5x06_ts_pm_ops, }, .id_table = edt_ft5x06_ts_id, diff --git a/drivers/input/touchscreen/tnetv107x-ts.c b/drivers/input/touchscreen/tnetv107x-ts.c deleted file mode 100644 index c47827a26e3..00000000000 --- a/drivers/input/touchscreen/tnetv107x-ts.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * Texas Instruments TNETV107X Touchscreen Driver - * - * Copyright (C) 2010 Texas Instruments - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/ctype.h> -#include <linux/io.h> -#include <linux/clk.h> - -#include <mach/tnetv107x.h> - -#define TSC_PENUP_POLL (HZ / 5) -#define IDLE_TIMEOUT 100 /* msec */ - -/* - * The first and last samples of a touch interval are usually garbage and need - * to be filtered out with these devices. The following definitions control - * the number of samples skipped. - */ -#define TSC_HEAD_SKIP 1 -#define TSC_TAIL_SKIP 1 -#define TSC_SKIP (TSC_HEAD_SKIP + TSC_TAIL_SKIP + 1) -#define TSC_SAMPLES (TSC_SKIP + 1) - -/* Register Offsets */ -struct tsc_regs { - u32 rev; - u32 tscm; - u32 bwcm; - u32 swc; - u32 adcchnl; - u32 adcdata; - u32 chval[4]; -}; - -/* TSC Mode Configuration Register (tscm) bits */ -#define WMODE BIT(0) -#define TSKIND BIT(1) -#define ZMEASURE_EN BIT(2) -#define IDLE BIT(3) -#define TSC_EN BIT(4) -#define STOP BIT(5) -#define ONE_SHOT BIT(6) -#define SINGLE BIT(7) -#define AVG BIT(8) -#define AVGNUM(x) (((x) & 0x03) << 9) -#define PVSTC(x) (((x) & 0x07) << 11) -#define PON BIT(14) -#define PONBG BIT(15) -#define AFERST BIT(16) - -/* ADC DATA Capture Register bits */ -#define DATA_VALID BIT(16) - -/* Register Access Macros */ -#define tsc_read(ts, reg) __raw_readl(&(ts)->regs->reg) -#define tsc_write(ts, reg, val) __raw_writel(val, &(ts)->regs->reg); -#define tsc_set_bits(ts, reg, val) \ - tsc_write(ts, reg, tsc_read(ts, reg) | (val)) -#define tsc_clr_bits(ts, reg, val) \ - tsc_write(ts, reg, tsc_read(ts, reg) & ~(val)) - -struct sample { - int x, y, p; -}; - -struct tsc_data { - struct input_dev *input_dev; - struct resource *res; - struct tsc_regs __iomem *regs; - struct timer_list timer; - spinlock_t lock; - struct clk *clk; - struct device *dev; - int sample_count; - struct sample samples[TSC_SAMPLES]; - int tsc_irq; -}; - -static int tsc_read_sample(struct tsc_data *ts, struct sample* sample) -{ - int x, y, z1, z2, t, p = 0; - u32 val; - - val = tsc_read(ts, chval[0]); - if (val & DATA_VALID) - x = val & 0xffff; - else - return -EINVAL; - - y = tsc_read(ts, chval[1]) & 0xffff; - z1 = tsc_read(ts, chval[2]) & 0xffff; - z2 = tsc_read(ts, chval[3]) & 0xffff; - - if (z1) { - t = ((600 * x) * (z2 - z1)); - p = t / (u32) (z1 << 12); - if (p < 0) - p = 0; - } - - sample->x = x; - sample->y = y; - sample->p = p; - - return 0; -} - -static void tsc_poll(unsigned long data) -{ - struct tsc_data *ts = (struct tsc_data *)data; - unsigned long flags; - int i, val, x, y, p; - - spin_lock_irqsave(&ts->lock, flags); - - if (ts->sample_count >= TSC_SKIP) { - input_report_abs(ts->input_dev, ABS_PRESSURE, 0); - input_report_key(ts->input_dev, BTN_TOUCH, 0); - input_sync(ts->input_dev); - } else if (ts->sample_count > 0) { - /* - * A touch event lasted less than our skip count. Salvage and - * report anyway. - */ - for (i = 0, val = 0; i < ts->sample_count; i++) - val += ts->samples[i].x; - x = val / ts->sample_count; - - for (i = 0, val = 0; i < ts->sample_count; i++) - val += ts->samples[i].y; - y = val / ts->sample_count; - - for (i = 0, val = 0; i < ts->sample_count; i++) - val += ts->samples[i].p; - p = val / ts->sample_count; - - input_report_abs(ts->input_dev, ABS_X, x); - input_report_abs(ts->input_dev, ABS_Y, y); - input_report_abs(ts->input_dev, ABS_PRESSURE, p); - input_report_key(ts->input_dev, BTN_TOUCH, 1); - input_sync(ts->input_dev); - } - - ts->sample_count = 0; - - spin_unlock_irqrestore(&ts->lock, flags); -} - -static irqreturn_t tsc_irq(int irq, void *dev_id) -{ - struct tsc_data *ts = (struct tsc_data *)dev_id; - struct sample *sample; - int index; - - spin_lock(&ts->lock); - - index = ts->sample_count % TSC_SAMPLES; - sample = &ts->samples[index]; - if (tsc_read_sample(ts, sample) < 0) - goto out; - - if (++ts->sample_count >= TSC_SKIP) { - index = (ts->sample_count - TSC_TAIL_SKIP - 1) % TSC_SAMPLES; - sample = &ts->samples[index]; - - input_report_abs(ts->input_dev, ABS_X, sample->x); - input_report_abs(ts->input_dev, ABS_Y, sample->y); - input_report_abs(ts->input_dev, ABS_PRESSURE, sample->p); - if (ts->sample_count == TSC_SKIP) - input_report_key(ts->input_dev, BTN_TOUCH, 1); - input_sync(ts->input_dev); - } - mod_timer(&ts->timer, jiffies + TSC_PENUP_POLL); -out: - spin_unlock(&ts->lock); - return IRQ_HANDLED; -} - -static int tsc_start(struct input_dev *dev) -{ - struct tsc_data *ts = input_get_drvdata(dev); - unsigned long timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT); - u32 val; - - clk_enable(ts->clk); - - /* Go to idle mode, before any initialization */ - while (time_after(timeout, jiffies)) { - if (tsc_read(ts, tscm) & IDLE) - break; - } - - if (time_before(timeout, jiffies)) { - dev_warn(ts->dev, "timeout waiting for idle\n"); - clk_disable(ts->clk); - return -EIO; - } - - /* Configure TSC Control register*/ - val = (PONBG | PON | PVSTC(4) | ONE_SHOT | ZMEASURE_EN); - tsc_write(ts, tscm, val); - - /* Bring TSC out of reset: Clear AFE reset bit */ - val &= ~(AFERST); - tsc_write(ts, tscm, val); - - /* Configure all pins for hardware control*/ - tsc_write(ts, bwcm, 0); - - /* Finally enable the TSC */ - tsc_set_bits(ts, tscm, TSC_EN); - - return 0; -} - -static void tsc_stop(struct input_dev *dev) -{ - struct tsc_data *ts = input_get_drvdata(dev); - - tsc_clr_bits(ts, tscm, TSC_EN); - synchronize_irq(ts->tsc_irq); - del_timer_sync(&ts->timer); - clk_disable(ts->clk); -} - -static int tsc_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct tsc_data *ts; - int error = 0; - u32 rev = 0; - - ts = kzalloc(sizeof(struct tsc_data), GFP_KERNEL); - if (!ts) { - dev_err(dev, "cannot allocate device info\n"); - return -ENOMEM; - } - - ts->dev = dev; - spin_lock_init(&ts->lock); - setup_timer(&ts->timer, tsc_poll, (unsigned long)ts); - platform_set_drvdata(pdev, ts); - - ts->tsc_irq = platform_get_irq(pdev, 0); - if (ts->tsc_irq < 0) { - dev_err(dev, "cannot determine device interrupt\n"); - error = -ENODEV; - goto error_res; - } - - ts->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!ts->res) { - dev_err(dev, "cannot determine register area\n"); - error = -ENODEV; - goto error_res; - } - - if (!request_mem_region(ts->res->start, resource_size(ts->res), - pdev->name)) { - dev_err(dev, "cannot claim register memory\n"); - ts->res = NULL; - error = -EINVAL; - goto error_res; - } - - ts->regs = ioremap(ts->res->start, resource_size(ts->res)); - if (!ts->regs) { - dev_err(dev, "cannot map register memory\n"); - error = -ENOMEM; - goto error_map; - } - - ts->clk = clk_get(dev, NULL); - if (IS_ERR(ts->clk)) { - dev_err(dev, "cannot claim device clock\n"); - error = PTR_ERR(ts->clk); - goto error_clk; - } - - error = request_threaded_irq(ts->tsc_irq, NULL, tsc_irq, IRQF_ONESHOT, - dev_name(dev), ts); - if (error < 0) { - dev_err(ts->dev, "Could not allocate ts irq\n"); - goto error_irq; - } - - ts->input_dev = input_allocate_device(); - if (!ts->input_dev) { - dev_err(dev, "cannot allocate input device\n"); - error = -ENOMEM; - goto error_input; - } - input_set_drvdata(ts->input_dev, ts); - - ts->input_dev->name = pdev->name; - ts->input_dev->id.bustype = BUS_HOST; - ts->input_dev->dev.parent = &pdev->dev; - ts->input_dev->open = tsc_start; - ts->input_dev->close = tsc_stop; - - clk_enable(ts->clk); - rev = tsc_read(ts, rev); - ts->input_dev->id.product = ((rev >> 8) & 0x07); - ts->input_dev->id.version = ((rev >> 16) & 0xfff); - clk_disable(ts->clk); - - __set_bit(EV_KEY, ts->input_dev->evbit); - __set_bit(EV_ABS, ts->input_dev->evbit); - __set_bit(BTN_TOUCH, ts->input_dev->keybit); - - input_set_abs_params(ts->input_dev, ABS_X, 0, 0xffff, 5, 0); - input_set_abs_params(ts->input_dev, ABS_Y, 0, 0xffff, 5, 0); - input_set_abs_params(ts->input_dev, ABS_PRESSURE, 0, 4095, 128, 0); - - error = input_register_device(ts->input_dev); - if (error < 0) { - dev_err(dev, "failed input device registration\n"); - goto error_reg; - } - - return 0; - -error_reg: - input_free_device(ts->input_dev); -error_input: - free_irq(ts->tsc_irq, ts); -error_irq: - clk_put(ts->clk); -error_clk: - iounmap(ts->regs); -error_map: - release_mem_region(ts->res->start, resource_size(ts->res)); -error_res: - kfree(ts); - - return error; -} - -static int tsc_remove(struct platform_device *pdev) -{ - struct tsc_data *ts = platform_get_drvdata(pdev); - - input_unregister_device(ts->input_dev); - free_irq(ts->tsc_irq, ts); - clk_put(ts->clk); - iounmap(ts->regs); - release_mem_region(ts->res->start, resource_size(ts->res)); - kfree(ts); - - return 0; -} - -static struct platform_driver tsc_driver = { - .probe = tsc_probe, - .remove = tsc_remove, - .driver.name = "tnetv107x-ts", - .driver.owner = THIS_MODULE, -}; -module_platform_driver(tsc_driver); - -MODULE_AUTHOR("Cyril Chemparathy"); -MODULE_DESCRIPTION("TNETV107X Touchscreen Driver"); -MODULE_ALIAS("platform:tnetv107x-ts"); -MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c index 2175f341900..01d30cedde4 100644 --- a/drivers/input/touchscreen/zforce_ts.c +++ b/drivers/input/touchscreen/zforce_ts.c @@ -29,10 +29,13 @@ #include <linux/sysfs.h> #include <linux/input/mt.h> #include <linux/platform_data/zforce_ts.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #define WAIT_TIMEOUT msecs_to_jiffies(1000) #define FRAME_START 0xee +#define FRAME_MAXSIZE 257 /* Offsets of the different parts of the payload the controller sends */ #define PAYLOAD_HEADER 0 @@ -64,7 +67,7 @@ #define RESPONSE_STATUS 0X1e /* - * Notifications are send by the touch controller without + * Notifications are sent by the touch controller without * being requested by the driver and include for example * touch indications */ @@ -103,8 +106,8 @@ struct zforce_point { * @suspended device suspended * @access_mutex serialize i2c-access, to keep multipart reads together * @command_done completion to wait for the command result - * @command_mutex serialize commands send to the ic - * @command_waiting the id of the command that that is currently waiting + * @command_mutex serialize commands sent to the ic + * @command_waiting the id of the command that is currently waiting * for a result * @command_result returned result of the command */ @@ -235,7 +238,8 @@ static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger, (finger & 0xff), ((finger >> 8) & 0xff), (stylus & 0xff), ((stylus >> 8) & 0xff) }; - dev_dbg(&client->dev, "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n", + dev_dbg(&client->dev, + "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n", idle, finger, stylus); return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf)); @@ -255,7 +259,7 @@ static int zforce_setconfig(struct zforce_ts *ts, char b1) static int zforce_start(struct zforce_ts *ts) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev); + const struct zforce_ts_platdata *pdata = ts->pdata; int ret; dev_dbg(&client->dev, "starting device\n"); @@ -326,13 +330,14 @@ static int zforce_stop(struct zforce_ts *ts) static int zforce_touch_event(struct zforce_ts *ts, u8 *payload) { struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev); + const struct zforce_ts_platdata *pdata = ts->pdata; struct zforce_point point; int count, i, num = 0; count = payload[0]; if (count > ZFORCE_REPORT_POINTS) { - dev_warn(&client->dev, "to many coordinates %d, expected max %d\n", + dev_warn(&client->dev, + "too many coordinates %d, expected max %d\n", count, ZFORCE_REPORT_POINTS); count = ZFORCE_REPORT_POINTS; } @@ -421,7 +426,7 @@ static int zforce_read_packet(struct zforce_ts *ts, u8 *buf) goto unlock; } - if (buf[PAYLOAD_LENGTH] <= 0 || buf[PAYLOAD_LENGTH] > 255) { + if (buf[PAYLOAD_LENGTH] == 0) { dev_err(&client->dev, "invalid payload length: %d\n", buf[PAYLOAD_LENGTH]); ret = -EIO; @@ -471,9 +476,9 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) { struct zforce_ts *ts = dev_id; struct i2c_client *client = ts->client; - const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev); + const struct zforce_ts_platdata *pdata = ts->pdata; int ret; - u8 payload_buffer[512]; + u8 payload_buffer[FRAME_MAXSIZE]; u8 *payload; /* @@ -494,8 +499,8 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) while (!gpio_get_value(pdata->gpio_int)) { ret = zforce_read_packet(ts, payload_buffer); if (ret < 0) { - dev_err(&client->dev, "could not read packet, ret: %d\n", - ret); + dev_err(&client->dev, + "could not read packet, ret: %d\n", ret); break; } @@ -539,7 +544,8 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) payload[RESPONSE_DATA + 4]; ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) | payload[RESPONSE_DATA + 6]; - dev_dbg(&ts->client->dev, "Firmware Version %04x:%04x %04x:%04x\n", + dev_dbg(&ts->client->dev, + "Firmware Version %04x:%04x %04x:%04x\n", ts->version_major, ts->version_minor, ts->version_build, ts->version_rev); @@ -552,7 +558,8 @@ static irqreturn_t zforce_irq_thread(int irq, void *dev_id) break; default: - dev_err(&ts->client->dev, "unrecognized response id: 0x%x\n", + dev_err(&ts->client->dev, + "unrecognized response id: 0x%x\n", payload[RESPONSE_ID]); break; } @@ -618,7 +625,8 @@ static int zforce_suspend(struct device *dev) enable_irq_wake(client->irq); } else if (input->users) { - dev_dbg(&client->dev, "suspend without being a wakeup source\n"); + dev_dbg(&client->dev, + "suspend without being a wakeup source\n"); ret = zforce_stop(ts); if (ret) @@ -684,6 +692,45 @@ static void zforce_reset(void *data) gpio_set_value(ts->pdata->gpio_rst, 0); } +static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev) +{ + struct zforce_ts_platdata *pdata; + struct device_node *np = dev->of_node; + + if (!np) + return ERR_PTR(-ENOENT); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "failed to allocate platform data\n"); + return ERR_PTR(-ENOMEM); + } + + pdata->gpio_int = of_get_gpio(np, 0); + if (!gpio_is_valid(pdata->gpio_int)) { + dev_err(dev, "failed to get interrupt gpio\n"); + return ERR_PTR(-EINVAL); + } + + pdata->gpio_rst = of_get_gpio(np, 1); + if (!gpio_is_valid(pdata->gpio_rst)) { + dev_err(dev, "failed to get reset gpio\n"); + return ERR_PTR(-EINVAL); + } + + if (of_property_read_u32(np, "x-size", &pdata->x_max)) { + dev_err(dev, "failed to get x-size property\n"); + return ERR_PTR(-EINVAL); + } + + if (of_property_read_u32(np, "y-size", &pdata->y_max)) { + dev_err(dev, "failed to get y-size property\n"); + return ERR_PTR(-EINVAL); + } + + return pdata; +} + static int zforce_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -692,8 +739,11 @@ static int zforce_probe(struct i2c_client *client, struct input_dev *input_dev; int ret; - if (!pdata) - return -EINVAL; + if (!pdata) { + pdata = zforce_parse_dt(&client->dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL); if (!ts) @@ -798,7 +848,7 @@ static int zforce_probe(struct i2c_client *client, return ret; } - /* this gets the firmware version among other informations */ + /* this gets the firmware version among other information */ ret = zforce_command_wait(ts, COMMAND_STATUS); if (ret < 0) { dev_err(&client->dev, "couldn't get status, %d\n", ret); @@ -829,11 +879,20 @@ static struct i2c_device_id zforce_idtable[] = { }; MODULE_DEVICE_TABLE(i2c, zforce_idtable); +#ifdef CONFIG_OF +static struct of_device_id zforce_dt_idtable[] = { + { .compatible = "neonode,zforce" }, + {}, +}; +MODULE_DEVICE_TABLE(of, zforce_dt_idtable); +#endif + static struct i2c_driver zforce_driver = { .driver = { .owner = THIS_MODULE, .name = "zforce-ts", .pm = &zforce_pm_ops, + .of_match_table = of_match_ptr(zforce_dt_idtable), }, .probe = zforce_probe, .id_table = zforce_idtable, diff --git a/include/linux/input/pmic8xxx-keypad.h b/include/linux/input/pmic8xxx-keypad.h deleted file mode 100644 index 5f1e2f9ad95..00000000000 --- a/include/linux/input/pmic8xxx-keypad.h +++ /dev/null @@ -1,52 +0,0 @@ -/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __PMIC8XXX_KEYPAD_H__ -#define __PMIC8XXX_KEYPAD_H__ - -#include <linux/input/matrix_keypad.h> - -#define PM8XXX_KEYPAD_DEV_NAME "pm8xxx-keypad" - -/** - * struct pm8xxx_keypad_platform_data - platform data for keypad - * @keymap_data - matrix keymap data - * @input_name - input device name - * @input_phys_device - input device name - * @num_cols - number of columns of keypad - * @num_rows - number of row of keypad - * @debounce_ms - debounce period in milliseconds - * @scan_delay_ms - scan delay in milliseconds - * @row_hold_ns - row hold period in nanoseconds - * @wakeup - configure keypad as wakeup - * @rep - enable or disable key repeat bit - */ -struct pm8xxx_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - const char *input_name; - const char *input_phys_device; - - unsigned int num_cols; - unsigned int num_rows; - unsigned int rows_gpio_start; - unsigned int cols_gpio_start; - - unsigned int debounce_ms; - unsigned int scan_delay_ms; - unsigned int row_hold_ns; - - bool wakeup; - bool rep; -}; - -#endif /*__PMIC8XXX_KEYPAD_H__ */ diff --git a/include/linux/input/pmic8xxx-pwrkey.h b/include/linux/input/pmic8xxx-pwrkey.h deleted file mode 100644 index 6d2974e5710..00000000000 --- a/include/linux/input/pmic8xxx-pwrkey.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __PMIC8XXX_PWRKEY_H__ -#define __PMIC8XXX_PWRKEY_H__ - -#define PM8XXX_PWRKEY_DEV_NAME "pm8xxx-pwrkey" - -/** - * struct pm8xxx_pwrkey_platform_data - platform data for pwrkey driver - * @pull up: power on register control for pull up/down configuration - * @kpd_trigger_delay_us: time delay for power key state change interrupt - * trigger. - * @wakeup: configure power key as wakeup source - */ -struct pm8xxx_pwrkey_platform_data { - bool pull_up; - u32 kpd_trigger_delay_us; - u32 wakeup; -}; - -#endif /* __PMIC8XXX_PWRKEY_H__ */ diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h index 26fdb22e0fc..58dc7c5ae63 100644 --- a/include/linux/platform_data/touchscreen-s3c2410.h +++ b/include/linux/platform_data/touchscreen-s3c2410.h @@ -1,5 +1,4 @@ -/* arch/arm/plat-samsung/include/plat/ts.h - * +/* * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> * * This program is free software; you can redistribute it and/or modify @@ -7,14 +6,14 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARM_TS_H -#define __ASM_ARM_TS_H +#ifndef __TOUCHSCREEN_S3C2410_H +#define __TOUCHSCREEN_S3C2410_H struct s3c2410_ts_mach_info { - int delay; - int presc; - int oversampling_shift; - void (*cfg_gpio)(struct platform_device *dev); + int delay; + int presc; + int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); }; extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); @@ -22,4 +21,4 @@ extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); /* defined by architecture to configure gpio */ extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); -#endif /* __ASM_ARM_TS_H */ +#endif /*__TOUCHSCREEN_S3C2410_H */ diff --git a/include/linux/uinput.h b/include/linux/uinput.h index 0a4487d3fb1..0994c0d01a0 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -20,6 +20,8 @@ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> * * Changes/Revisions: + * 0.4 01/09/2014 (Benjamin Tissoires <benjamin.tissoires@redhat.com>) + * - add UI_GET_SYSNAME ioctl * 0.3 24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>) * - update ff support for the changes in kernel interface * - add UINPUT_VERSION diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h index fe46431593f..0389b489bbb 100644 --- a/include/uapi/linux/uinput.h +++ b/include/uapi/linux/uinput.h @@ -20,6 +20,8 @@ * Author: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> * * Changes/Revisions: + * 0.4 01/09/2014 (Benjamin Tissoires <benjamin.tissoires@redhat.com>) + * - add UI_GET_SYSNAME ioctl * 0.3 24/05/2006 (Anssi Hannula <anssi.hannulagmail.com>) * - update ff support for the changes in kernel interface * - add UINPUT_VERSION @@ -35,7 +37,7 @@ #include <linux/types.h> #include <linux/input.h> -#define UINPUT_VERSION 3 +#define UINPUT_VERSION 4 struct uinput_ff_upload { @@ -73,6 +75,15 @@ struct uinput_ff_erase { #define UI_BEGIN_FF_ERASE _IOWR(UINPUT_IOCTL_BASE, 202, struct uinput_ff_erase) #define UI_END_FF_ERASE _IOW(UINPUT_IOCTL_BASE, 203, struct uinput_ff_erase) +/** + * UI_GET_SYSNAME - get the sysfs name of the created uinput device + * + * @return the sysfs name of the created virtual input device. + * The complete sysfs path is then /sys/devices/virtual/input/--NAME-- + * Usually, it is in the form "inputN" + */ +#define UI_GET_SYSNAME(len) _IOC(_IOC_READ, UINPUT_IOCTL_BASE, 300, len) + /* * To write a force-feedback-capable driver, the upload_effect * and erase_effect callbacks in input_dev must be implemented. |