aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/Kconfig1
-rw-r--r--arch/powerpc/kernel/pci_64.c35
-rw-r--r--arch/powerpc/kernel/prom.c26
-rw-r--r--arch/powerpc/kernel/udbg.c2
-rw-r--r--arch/powerpc/platforms/maple/setup.c4
-rw-r--r--arch/powerpc/platforms/powermac/feature.c65
-rw-r--r--arch/powerpc/platforms/powermac/pci.c210
-rw-r--r--arch/powerpc/platforms/powermac/pic.c72
-rw-r--r--arch/powerpc/platforms/powermac/setup.c13
-rw-r--r--arch/powerpc/platforms/powermac/smp.c319
-rw-r--r--arch/powerpc/sysdev/Makefile2
-rw-r--r--arch/powerpc/sysdev/dart.h41
-rw-r--r--arch/powerpc/sysdev/dart_iommu.c (renamed from arch/powerpc/sysdev/u3_iommu.c)173
-rw-r--r--arch/powerpc/sysdev/mpic.c199
-rw-r--r--drivers/ide/ppc/pmac.c2
-rw-r--r--drivers/macintosh/smu.c8
-rw-r--r--include/asm-powerpc/iommu.h6
-rw-r--r--include/asm-powerpc/mpic.h3
-rw-r--r--include/asm-powerpc/pmac_feature.h2
-rw-r--r--include/linux/pci_regs.h1
20 files changed, 807 insertions, 377 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 773b880d557..5692edb3491 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -300,6 +300,7 @@ config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
select U3_DART
+ select MPIC_BROKEN_U3
select GENERIC_TBSYNC
default y
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 523f35087e8..f73a16e9867 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -34,7 +34,7 @@
#ifdef DEBUG
#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(fmt)
#else
#define DBG(fmt...)
#endif
@@ -323,6 +323,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
addrs = (u32 *) get_property(node, "assigned-addresses", &proplen);
if (!addrs)
return;
+ DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
@@ -332,6 +333,9 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
if (!size)
continue;
i = addrs[0] & 0xff;
+ DBG(" base: %llx, size: %llx, i: %x\n",
+ (unsigned long long)base, (unsigned long long)size, i);
+
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
@@ -362,6 +366,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
if (type == NULL)
type = "";
+ DBG(" create device, devfn: %x, type: %s\n", devfn, type);
+
memset(dev, 0, sizeof(struct pci_dev));
dev->bus = bus;
dev->sysdata = node;
@@ -381,6 +387,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
+ DBG(" class: 0x%x\n", dev->class);
+
dev->current_state = 4; /* unknown power state */
if (!strcmp(type, "pci")) {
@@ -402,6 +410,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
pci_parse_of_addrs(node, dev);
+ DBG(" adding to system ...\n");
+
pci_device_add(dev, bus);
/* XXX pci_scan_msi_device(dev); */
@@ -418,15 +428,21 @@ void __devinit of_scan_bus(struct device_node *node,
int reglen, devfn;
struct pci_dev *dev;
+ DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number);
+
while ((child = of_get_next_child(node, child)) != NULL) {
+ DBG(" * %s\n", child->full_name);
reg = (u32 *) get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
+
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
+ DBG("dev header type: %x\n", dev->hdr_type);
+
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
of_scan_pci_bridge(child, dev);
@@ -446,16 +462,18 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
unsigned int flags;
u64 size;
+ DBG("of_scan_pci_bridge(%s)\n", node->full_name);
+
/* parse bus-range property */
busrange = (u32 *) get_property(node, "bus-range", &len);
if (busrange == NULL || len != 8) {
- printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n",
+ printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
node->full_name);
return;
}
ranges = (u32 *) get_property(node, "ranges", &len);
if (ranges == NULL) {
- printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n",
+ printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
node->full_name);
return;
}
@@ -509,10 +527,13 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
+ DBG(" bus name: %s\n", bus->name);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
+ DBG(" probe mode: %d\n", mode);
+
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
else if (mode == PCI_PROBE_NORMAL)
@@ -528,6 +549,8 @@ void __devinit scan_phb(struct pci_controller *hose)
int i, mode;
struct resource *res;
+ DBG("Scanning PHB %s\n", node ? node->full_name : "<NO NAME>");
+
bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node);
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
@@ -552,8 +575,9 @@ void __devinit scan_phb(struct pci_controller *hose)
mode = PCI_PROBE_NORMAL;
#ifdef CONFIG_PPC_MULTIPLATFORM
- if (ppc_md.pci_probe_mode)
+ if (node && ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
+ DBG(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
@@ -842,8 +866,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
* Returns a negative error code on failure, zero on success.
*/
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine)
+ enum pci_mmap_state mmap_state, int write_combine)
{
unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
struct resource *rp;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 1b97e13657e..977ee3adaf2 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -298,6 +298,16 @@ static int __devinit finish_node_interrupts(struct device_node *np,
int i, j, n, sense;
unsigned int *irq, virq;
struct device_node *ic;
+ int trace = 0;
+
+ //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0)
+#define TRACE(fmt...)
+
+ if (!strcmp(np->name, "smu-doorbell"))
+ trace = 1;
+
+ TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n",
+ num_interrupt_controllers);
if (num_interrupt_controllers == 0) {
/*
@@ -332,11 +342,12 @@ static int __devinit finish_node_interrupts(struct device_node *np,
}
ints = (unsigned int *) get_property(np, "interrupts", &intlen);
+ TRACE("ints=%p, intlen=%d\n", ints, intlen);
if (ints == NULL)
return 0;
intrcells = prom_n_intr_cells(np);
intlen /= intrcells * sizeof(unsigned int);
-
+ TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen);
np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start);
if (!np->intrs)
return -ENOMEM;
@@ -347,6 +358,7 @@ static int __devinit finish_node_interrupts(struct device_node *np,
intrcount = 0;
for (i = 0; i < intlen; ++i, ints += intrcells) {
n = map_interrupt(&irq, &ic, np, ints, intrcells);
+ TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n);
if (n <= 0)
continue;
@@ -357,6 +369,7 @@ static int __devinit finish_node_interrupts(struct device_node *np,
np->intrs[intrcount].sense = map_isa_senses[sense];
} else {
virq = virt_irq_create_mapping(irq[0]);
+ TRACE("virq=%d\n", virq);
#ifdef CONFIG_PPC64
if (virq == NO_IRQ) {
printk(KERN_CRIT "Could not allocate interrupt"
@@ -366,6 +379,12 @@ static int __devinit finish_node_interrupts(struct device_node *np,
#endif
np->intrs[intrcount].line = irq_offset_up(virq);
sense = (n > 1)? (irq[1] & 3): 1;
+
+ /* Apple uses bits in there in a different way, let's
+ * only keep the real sense bit on macs
+ */
+ if (_machine == PLATFORM_POWERMAC)
+ sense &= 0x1;
np->intrs[intrcount].sense = map_mpic_senses[sense];
}
@@ -375,12 +394,13 @@ static int __devinit finish_node_interrupts(struct device_node *np,
char *name = get_property(ic->parent, "name", NULL);
if (name && !strcmp(name, "u3"))
np->intrs[intrcount].line += 128;
- else if (!(name && !strcmp(name, "mac-io")))
+ else if (!(name && (!strcmp(name, "mac-io") ||
+ !strcmp(name, "u4"))))
/* ignore other cascaded controllers, such as
the k2-sata-root */
break;
}
-#endif
+#endif /* CONFIG_PPC64 */
if (n > 2) {
printk("hmmm, got %d intr cells for %s:", n,
np->full_name);
diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c
index a058285a70e..9567d9474c8 100644
--- a/arch/powerpc/kernel/udbg.c
+++ b/arch/powerpc/kernel/udbg.c
@@ -110,10 +110,12 @@ static int early_console_initialized;
void __init disable_early_printk(void)
{
+#if 1
if (!early_console_initialized)
return;
unregister_console(&udbg_console);
early_console_initialized = 0;
+#endif
}
/* called by setup_system */
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 65fe4c166a6..dd73e38bfb7 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -195,7 +195,7 @@ static void __init maple_init_early(void)
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
- iommu_init_early_u3();
+ iommu_init_early_dart();
DBG(" <- maple_init_early\n");
}
@@ -257,7 +257,7 @@ static int __init maple_probe(int platform)
* occupies having to be broken up so the DART itself is not
* part of the cacheable linar mapping
*/
- alloc_u3_dart_table();
+ alloc_dart_table();
return 1;
}
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index b1f896952b1..d2915d64d45 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -101,7 +101,8 @@ static const char *macio_names[] =
"Keylargo",
"Pangea",
"Intrepid",
- "K2"
+ "K2",
+ "Shasta",
};
@@ -119,7 +120,7 @@ static const char *macio_names[] =
static struct device_node *uninorth_node;
static u32 __iomem *uninorth_base;
static u32 uninorth_rev;
-static int uninorth_u3;
+static int uninorth_maj;
static void __iomem *u3_ht;
/*
@@ -1399,8 +1400,15 @@ static long g5_fw_enable(struct device_node *node, long param, long value)
static long g5_mpic_enable(struct device_node *node, long param, long value)
{
unsigned long flags;
+ struct device_node *parent = of_get_parent(node);
+ int is_u3;
- if (node->parent == NULL || strcmp(node->parent->name, "u3"))
+ if (parent == NULL)
+ return 0;
+ is_u3 = strcmp(parent->name, "u3") == 0 ||
+ strcmp(parent->name, "u4") == 0;
+ of_node_put(parent);
+ if (!is_u3)
return 0;
LOCK(flags);
@@ -1464,7 +1472,7 @@ static long g5_i2s_enable(struct device_node *node, long param, long value)
},
};
- if (macio->type != macio_keylargo2 /* && macio->type != macio_shasta*/)
+ if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;
if (strncmp(node->name, "i2s-", 4))
return -ENODEV;
@@ -1473,11 +1481,9 @@ static long g5_i2s_enable(struct device_node *node, long param, long value)
case 0:
case 1:
break;
-#if 0
case 2:
if (macio->type == macio_shasta)
break;
-#endif
default:
return -ENODEV;
}
@@ -1508,7 +1514,7 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
struct device_node *np;
macio = &macio_chips[0];
- if (macio->type != macio_keylargo2)
+ if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
return -ENODEV;
np = find_path_device("/cpus");
@@ -1547,7 +1553,8 @@ static long g5_reset_cpu(struct device_node *node, long param, long value)
*/
void g5_phy_disable_cpu1(void)
{
- UN_OUT(U3_API_PHY_CONFIG_1, 0);
+ if (uninorth_maj == 3)
+ UN_OUT(U3_API_PHY_CONFIG_1, 0);
}
#endif /* CONFIG_POWER4 */
@@ -2462,6 +2469,14 @@ static struct pmac_mb_def pmac_mb_defs[] = {
PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
0,
},
+ { "PowerMac11,2", "PowerMac G5 Dual Core",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
+ { "PowerMac12,1", "iMac G5 (iSight)",
+ PMAC_TYPE_POWERMAC_G5_U3L, g5_features,
+ 0,
+ },
{ "RackMac3,1", "XServe G5",
PMAC_TYPE_XSERVE_G5, g5_features,
0,
@@ -2574,6 +2589,11 @@ static int __init probe_motherboard(void)
pmac_mb.model_name = "Unknown K2-based";
pmac_mb.features = g5_features;
break;
+ case macio_shasta:
+ pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
+ pmac_mb.model_name = "Unknown Shasta-based";
+ pmac_mb.features = g5_features;
+ break;
#endif /* CONFIG_POWER4 */
default:
return -ENODEV;
@@ -2651,7 +2671,12 @@ static void __init probe_uninorth(void)
/* Locate G5 u3 */
if (uninorth_node == NULL) {
uninorth_node = of_find_node_by_name(NULL, "u3");
- uninorth_u3 = 1;
+ uninorth_maj = 3;
+ }
+ /* Locate G5 u4 */
+ if (uninorth_node == NULL) {
+ uninorth_node = of_find_node_by_name(NULL, "u4");
+ uninorth_maj = 4;
}
if (uninorth_node == NULL)
return;
@@ -2664,12 +2689,13 @@ static void __init probe_uninorth(void)
return;
uninorth_base = ioremap(address, 0x40000);
uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
- if (uninorth_u3)
+ if (uninorth_maj == 3 || uninorth_maj == 4)
u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
- printk(KERN_INFO "Found %s memory controller & host bridge,"
- " revision: %d\n", uninorth_u3 ? "U3" : "UniNorth",
- uninorth_rev);
+ printk(KERN_INFO "Found %s memory controller & host bridge"
+ " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
+ uninorth_maj == 4 ? "U4" : "UniNorth",
+ (unsigned int)address, uninorth_rev);
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
/* Set the arbitrer QAck delay according to what Apple does
@@ -2677,7 +2703,8 @@ static void __init probe_uninorth(void)
if (uninorth_rev < 0x11) {
actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
- UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+ UNI_N_ARB_CTRL_QACK_DELAY) <<
+ UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
UN_OUT(UNI_N_ARB_CTRL, actrl);
}
@@ -2685,7 +2712,8 @@ static void __init probe_uninorth(void)
* revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
* memory timeout
*/
- if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || uninorth_rev == 0xc0)
+ if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
+ uninorth_rev == 0xc0)
UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
}
@@ -2736,12 +2764,14 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
node->full_name);
return;
}
- if (type == macio_keylargo) {
+ if (type == macio_keylargo || type == macio_keylargo2) {
u32 *did = (u32 *)get_property(node, "device-id", NULL);
if (*did == 0x00000025)
type = macio_pangea;
if (*did == 0x0000003e)
type = macio_intrepid;
+ if (*did == 0x0000004f)
+ type = macio_shasta;
}
macio_chips[i].of_node = node;
macio_chips[i].type = type;
@@ -2840,7 +2870,8 @@ set_initial_features(void)
}
#ifdef CONFIG_POWER4
- if (macio_chips[0].type == macio_keylargo2) {
+ if (macio_chips[0].type == macio_keylargo2 ||
+ macio_chips[0].type == macio_shasta) {
#ifndef CONFIG_SMP
/* On SMP machines running UP, we have the second CPU eating
* bus cycles. We need to take it off the bus. This is done
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 5aab261075d..f671ed25390 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1,7 +1,7 @@
/*
* Support for PCI bridges found on Power Macintoshes.
*
- * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
+ * Copyright (C) 2003-2005 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
* Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
*
* This program is free software; you can redistribute it and/or
@@ -25,7 +25,7 @@
#include <asm/pmac_feature.h>
#include <asm/grackle.h>
#ifdef CONFIG_PPC64
-#include <asm/iommu.h>
+//#include <asm/iommu.h>
#include <asm/ppc-pci.h>
#endif
@@ -44,6 +44,7 @@ static int add_bridge(struct device_node *dev);
static int has_uninorth;
#ifdef CONFIG_PPC64
static struct pci_controller *u3_agp;
+static struct pci_controller *u4_pcie;
static struct pci_controller *u3_ht;
#endif /* CONFIG_PPC64 */
@@ -97,11 +98,8 @@ static void __init fixup_bus_range(struct device_node *bridge)
/* Lookup the "bus-range" property for the hose */
bus_range = (int *) get_property(bridge, "bus-range", &len);
- if (bus_range == NULL || len < 2 * sizeof(int)) {
- printk(KERN_WARNING "Can't get bus-range for %s\n",
- bridge->full_name);
+ if (bus_range == NULL || len < 2 * sizeof(int))
return;
- }
bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
}
@@ -128,14 +126,14 @@ static void __init fixup_bus_range(struct device_node *bridge)
*/
#define MACRISC_CFA0(devfn, off) \
- ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
- | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
- | (((unsigned long)(off)) & 0xFCUL))
+ ((1 << (unsigned int)PCI_SLOT(dev_fn)) \
+ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+ | (((unsigned int)(off)) & 0xFCUL))
#define MACRISC_CFA1(bus, devfn, off) \
- ((((unsigned long)(bus)) << 16) \
- |(((unsigned long)(devfn)) << 8) \
- |(((unsigned long)(off)) & 0xFCUL) \
+ ((((unsigned int)(bus)) << 16) \
+ |(((unsigned int)(devfn)) << 8) \
+ |(((unsigned int)(off)) & 0xFCUL) \
|1UL)
static unsigned long macrisc_cfg_access(struct pci_controller* hose,
@@ -168,7 +166,8 @@ static int macrisc_read_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -199,7 +198,8 @@ static int macrisc_write_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -234,12 +234,13 @@ static struct pci_ops macrisc_pci_ops =
/*
* Verify that a specific (bus, dev_fn) exists on chaos
*/
-static int
-chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
{
struct device_node *np;
u32 *vendor, *device;
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
np = pci_busdev_to_OF_node(bus, devfn);
if (np == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -341,10 +342,10 @@ static int u3_ht_skip_device(struct pci_controller *hose,
}
#define U3_HT_CFA0(devfn, off) \
- ((((unsigned long)devfn) << 8) | offset)
+ ((((unsigned int)devfn) << 8) | offset)
#define U3_HT_CFA1(bus, devfn, off) \
(U3_HT_CFA0(devfn, off) \
- + (((unsigned long)bus) << 16) \
+ + (((unsigned int)bus) << 16) \
+ 0x01000000UL)
static unsigned long u3_ht_cfg_access(struct pci_controller* hose,
@@ -370,7 +371,8 @@ static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -419,7 +421,8 @@ static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
hose = pci_bus_to_host(bus);
if (hose == NULL)
return PCIBIOS_DEVICE_NOT_FOUND;
-
+ if (offset >= 0x100)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
@@ -459,6 +462,112 @@ static struct pci_ops u3_ht_pci_ops =
u3_ht_read_config,
u3_ht_write_config
};
+
+#define U4_PCIE_CFA0(devfn, off) \
+ ((1 << ((unsigned int)PCI_SLOT(dev_fn))) \
+ | (((unsigned int)PCI_FUNC(dev_fn)) << 8) \
+ | ((((unsigned int)(off)) >> 8) << 28) \
+ | (((unsigned int)(off)) & 0xfcU))
+
+#define U4_PCIE_CFA1(bus, devfn, off) \
+ ((((unsigned int)(bus)) << 16) \
+ |(((unsigned int)(devfn)) << 8) \
+ | ((((unsigned int)(off)) >> 8) << 28) \
+ |(((unsigned int)(off)) & 0xfcU) \
+ |1UL)
+
+static unsigned long u4_pcie_cfg_access(struct pci_controller* hose,
+ u8 bus, u8 dev_fn, int offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ caddr = U4_PCIE_CFA0(dev_fn, offset);
+ } else
+ caddr = U4_PCIE_CFA1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= 0x03;
+ return ((unsigned long)hose->cfg_data) + offset;
+}
+
+static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *)addr);
+ break;
+ case 2:
+ *val = in_le16((u16 *)addr);
+ break;
+ default:
+ *val = in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ unsigned long addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8((u8 *)addr, val);
+ (void) in_8((u8 *)addr);
+ break;
+ case 2:
+ out_le16((u16 *)addr, val);
+ (void) in_le16((u16 *)addr);
+ break;
+ default:
+ out_le32((u32 *)addr, val);
+ (void) in_le32((u32 *)addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u4_pcie_pci_ops =
+{
+ u4_pcie_read_config,
+ u4_pcie_write_config
+};
+
#endif /* CONFIG_PPC64 */
#ifdef CONFIG_PPC32
@@ -628,15 +737,36 @@ static void __init setup_u3_agp(struct pci_controller* hose)
hose->ops = &macrisc_pci_ops;
hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
-
u3_agp = hose;
}
+static void __init setup_u4_pcie(struct pci_controller* hose)
+{
+ /* We currently only implement the "non-atomic" config space, to
+ * be optimised later.
+ */
+ hose->ops = &u4_pcie_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ /* The bus contains a bridge from root -> device, we need to
+ * make it visible on bus 0 so that we pick the right type
+ * of config cycles. If we didn't, we would have to force all
+ * config cycles to be type 1. So we override the "bus-range"
+ * property here
+ */
+ hose->first_busno = 0x00;
+ hose->last_busno = 0xff;
+ u4_pcie = hose;
+}
+
static void __init setup_u3_ht(struct pci_controller* hose)
{
struct device_node *np = (struct device_node *)hose->arch_data;
+ struct pci_controller *other = NULL;
int i, cur;
+
hose->ops = &u3_ht_pci_ops;
/* We hard code the address because of the different size of
@@ -670,11 +800,20 @@ static void __init setup_u3_ht(struct pci_controller* hose)
u3_ht = hose;
- if (u3_agp == NULL) {
- DBG("U3 has no AGP, using full resource range\n");
+ if (u3_agp != NULL)
+ other = u3_agp;
+ else if (u4_pcie != NULL)
+ other = u4_pcie;
+
+ if (other == NULL) {
+ DBG("U3/4 has no AGP/PCIE, using full resource range\n");
return;
}
+ /* Fixup bus range vs. PCIE */
+ if (u4_pcie)
+ hose->last_busno = u4_pcie->first_busno - 1;
+
/* We "remove" the AGP resources from the resources allocated to HT,
* that is we create "holes". However, that code does assumptions
* that so far happen to be true (cross fingers...), typically that
@@ -682,7 +821,7 @@ static void __init setup_u3_ht(struct pci_controller* hose)
*/
cur = 0;
for (i=0; i<3; i++) {
- struct resource *res = &u3_agp->mem_resources[i];
+ struct resource *res = &other->mem_resources[i];
if (res->flags != IORESOURCE_MEM)
continue;
/* We don't care about "fine" resources */
@@ -777,9 +916,13 @@ static int __init add_bridge(struct device_node *dev)
setup_u3_ht(hose);
disp_name = "U3-HT";
primary = 1;
+ } else if (device_is_compatible(dev, "u4-pcie")) {
+ setup_u4_pcie(hose);
+ disp_name = "U4-PCIE";
+ primary = 0;
}
- printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
- disp_name, hose->first_busno, hose->last_busno);
+ printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:"
+ " %d->%d\n", disp_name, hose->first_busno, hose->last_busno);
#endif /* CONFIG_PPC64 */
/* 32 bits only bridges */
@@ -900,6 +1043,8 @@ void __init pmac_pci_init(void)
pci_setup_phb_io(u3_ht, 1);
if (u3_agp)
pci_setup_phb_io(u3_agp, 0);
+ if (u4_pcie)
+ pci_setup_phb_io(u4_pcie, 0);
/*
* On ppc64, fixup the IO resources on our host bridges as
@@ -912,7 +1057,8 @@ void __init pmac_pci_init(void)
/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
* assume there is no P2P bridge on the AGP bus, which should be a
- * safe assumptions hopefully.
+ * safe assumptions for now. We should do something better in the
+ * future though
*/
if (u3_agp) {
struct device_node *np = u3_agp->arch_data;
@@ -920,7 +1066,6 @@ void __init pmac_pci_init(void)
for (np = np->child; np; np = np->sibling)
PCI_DN(np)->busno = 0xf0;
}
-
/* pmac_check_ht_link(); */
/* Tell pci.c to not use the common resource allocation mechanism */
@@ -1127,7 +1272,8 @@ void pmac_pci_fixup_pciata(struct pci_dev* dev)
good:
pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
if ((progif & 5) != 5) {
- printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+ printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n",
+ pci_name(dev));
(void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
(progif & 5) != 5)
@@ -1153,7 +1299,8 @@ static void fixup_k2_sata(struct pci_dev* dev)
for (i = 0; i < 6; i++) {
dev->resource[i].start = dev->resource[i].end = 0;
dev->resource[i].flags = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+ 0);
}
} else {
pci_read_config_word(dev, PCI_COMMAND, &cmd);
@@ -1162,7 +1309,8 @@ static void fixup_k2_sata(struct pci_dev* dev)
for (i = 0; i < 5; i++) {
dev->resource[i].start = dev->resource[i].end = 0;
dev->resource[i].flags = 0;
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i,
+ 0);
}
}
}
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index dbb524a851a..18bf3011d1e 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -524,18 +524,56 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic)
#endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */
}
+static struct mpic * __init pmac_setup_one_mpic(struct device_node *np,
+ int master)
+{
+ unsigned char senses[128];
+ int offset = master ? 0 : 128;
+ int count = master ? 128 : 124;
+ const char *name = master ? " MPIC 1 " : " MPIC 2 ";
+ struct resource r;
+ struct mpic *mpic;
+ unsigned int flags = master ? MPIC_PRIMARY : 0;
+ int rc;
+
+ rc = of_address_to_resource(np, 0, &r);
+ if (rc)
+ return NULL;
+
+ pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0);
+
+ prom_get_irq_senses(senses, offset, offset + count);
+
+ flags |= MPIC_WANTS_RESET;
+ if (get_property(np, "big-endian", NULL))
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* Primary Big Endian means HT interrupts. This is quite dodgy
+ * but works until I find a better way
+ */
+ if (master && (flags & MPIC_BIG_ENDIAN))
+ flags |= MPIC_BROKEN_U3;
+
+ mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0,
+ senses, count, name);
+ if (mpic == NULL)
+ return NULL;
+
+ mpic_init(mpic);
+
+ return mpic;
+ }
+
static int __init pmac_pic_probe_mpic(void)
{
struct mpic *mpic1, *mpic2;
struct device_node *np, *master = NULL, *slave = NULL;
- unsigned char senses[128];
- struct resource r;
/* We can have up to 2 MPICs cascaded */
for (np = NULL; (np = of_find_node_by_type(np, "open-pic"))
!= NULL;) {
if (master == NULL &&
- get_property(np, "interrupt-parent", NULL) != NULL)
+ get_property(np, "interrupts", NULL) == NULL)
master = of_node_get(np);
else if (slave == NULL)
slave = of_node_get(np);
@@ -557,13 +595,8 @@ static int __init pmac_pic_probe_mpic(void)
ppc_md.get_irq = mpic_get_irq;
/* Setup master */
- BUG_ON(of_address_to_resource(master, 0, &r));
- pmac_call_feature(PMAC_FTR_ENABLE_MPIC, master, 0, 0);
- prom_get_irq_senses(senses, 0, 128);
- mpic1 = mpic_alloc(r.start, MPIC_PRIMARY | MPIC_WANTS_RESET,
- 0, 0, 128, 252, senses, 128, " OpenPIC ");
+ mpic1 = pmac_setup_one_mpic(master, 1);
BUG_ON(mpic1 == NULL);
- mpic_init(mpic1);
/* Install NMI if any */
pmac_pic_setup_mpic_nmi(mpic1);
@@ -574,27 +607,12 @@ static int __init pmac_pic_probe_mpic(void)
if (slave == NULL || slave->n_intrs < 1)
return 0;
- /* Setup slave, failures are non-fatal */
- if (of_address_to_resource(slave, 0, &r)) {
- printk(KERN_ERR "Can't get address of MPIC %s\n",
- slave->full_name);
- return 0;
- }
- pmac_call_feature(PMAC_FTR_ENABLE_MPIC, slave, 0, 0);
- prom_get_irq_senses(senses, 128, 128 + 124);
-
- /* We don't need to set MPIC_BROKEN_U3 here since we don't have
- * hypertransport interrupts routed to it, at least not on currently
- * supported machines, that may change.
- */
- mpic2 = mpic_alloc(r.start, MPIC_BIG_ENDIAN | MPIC_WANTS_RESET,
- 0, 128, 124, 0, senses, 124, " U3-MPIC ");
+ mpic2 = pmac_setup_one_mpic(slave, 0);
if (mpic2 == NULL) {
- printk(KERN_ERR "Can't create slave MPIC %s\n",
- slave->full_name);
+ printk(KERN_ERR "Failed to setup slave MPIC\n");
+ of_node_put(slave);
return 0;
}
- mpic_init(mpic2);
mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2);
of_node_put(slave);
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 18c5620f87f..1daa5a06e9e 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -345,7 +345,7 @@ void __init pmac_setup_arch(void)
#ifdef CONFIG_SMP
/* Check for Core99 */
- if (find_devices("uni-n") || find_devices("u3"))
+ if (find_devices("uni-n") || find_devices("u3") || find_devices("u4"))
smp_ops = &core99_smp_ops;
#ifdef CONFIG_PPC32
else
@@ -635,7 +635,7 @@ static void __init pmac_init_early(void)
/* Setup interrupt mapping options */
ppc64_interrupt_controller = IC_OPEN_PIC;
- iommu_init_early_u3();
+ iommu_init_early_dart();
#endif
}
@@ -711,7 +711,7 @@ static int __init pmac_probe(int platform)
* occupies having to be broken up so the DART itself is not
* part of the cacheable linar mapping
*/
- alloc_u3_dart_table();
+ alloc_dart_table();
#endif
#ifdef CONFIG_PMAC_SMU
@@ -733,10 +733,11 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
struct device_node *node = bus->sysdata;
/* We need to use normal PCI probing for the AGP bus,
- since the device for the AGP bridge isn't in the tree. */
- if (bus->self == NULL && device_is_compatible(node, "u3-agp"))
+ * since the device for the AGP bridge isn't in the tree.
+ */
+ if (bus->self == NULL && (device_is_compatible(node, "u3-agp") ||
+ device_is_compatible(node, "u4-pcie")))
return PCI_PROBE_NORMAL;
-
return PCI_PROBE_DEVTREE;
}
#endif
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 862f1e985c1..df01bb8feb1 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -361,7 +361,6 @@ static void __init psurge_dual_sync_tb(int cpu_nr)
set_dec(tb_ticks_per_jiffy);
/* XXX fixme */
set_tb(0, 0);
- last_jiffy_stamp(cpu_nr) = 0;
if (cpu_nr > 0) {
mb();
@@ -429,15 +428,62 @@ struct smp_ops_t psurge_smp_ops = {
};
#endif /* CONFIG_PPC32 - actually powersurge support */
+/*
+ * Core 99 and later support
+ */
+
+static void (*pmac_tb_freeze)(int freeze);
+static unsigned long timebase;
+static int tb_req;
+
+static void smp_core99_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ (*pmac_tb_freeze)(1);
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ (*pmac_tb_freeze)(0);
+ mb();
+
+ local_irq_restore(flags);
+}
+
+
+static void __devinit smp_core99_take_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
+
+ local_irq_restore(flags);
+}
+
#ifdef CONFIG_PPC64
/*
* G5s enable/disable the timebase via an i2c-connected clock chip.
*/
static struct device_node *pmac_tb_clock_chip_host;
static u8 pmac_tb_pulsar_addr;
-static void (*pmac_tb_freeze)(int freeze);
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned long timebase;
static void smp_core99_cypress_tb_freeze(int freeze)
{
@@ -447,7 +493,8 @@ static void smp_core99_cypress_tb_freeze(int freeze)
/* Strangely, the device-tree says address is 0xd2, but darwin
* accesses 0xd0 ...
*/
- pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
+ pmac_low_i2c_setmode(pmac_tb_clock_chip_host,
+ pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
0xd0 | pmac_low_i2c_read,
0x81, &data, 1);
@@ -475,7 +522,8 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
u8 data;
int rc;
- pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
+ pmac_low_i2c_setmode(pmac_tb_clock_chip_host,
+ pmac_low_i2c_mode_combined);
rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
pmac_tb_pulsar_addr | pmac_low_i2c_read,
0x2e, &data, 1);
@@ -496,54 +544,14 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
}
}
-
-static void smp_core99_give_timebase(void)
-{
- /* Open i2c bus for synchronous access */
- if (pmac_low_i2c_open(pmac_tb_clock_chip_host, 0))
- panic("Can't open i2c for TB sync !\n");
-
- spin_lock(&timebase_lock);
- (*pmac_tb_freeze)(1);
- mb();
- timebase = get_tb();
- spin_unlock(&timebase_lock);
-
- while (timebase)
- barrier();
-
- spin_lock(&timebase_lock);
- (*pmac_tb_freeze)(0);
- spin_unlock(&timebase_lock);
-
- /* Close i2c bus */
- pmac_low_i2c_close(pmac_tb_clock_chip_host);
-}
-
-
-static void __devinit smp_core99_take_timebase(void)
-{
- while (!timebase)
- barrier();
- spin_lock(&timebase_lock);
- set_tb(timebase >> 32, timebase & 0xffffffff);
- timebase = 0;
- spin_unlock(&timebase_lock);
-}
-
-static void __init smp_core99_setup(int ncpus)
+static void __init smp_core99_setup_i2c_hwsync(int ncpus)
{
struct device_node *cc = NULL;
struct device_node *p;
+ const char *name = NULL;
u32 *reg;
int ok;
- /* HW sync only on these platforms */
- if (!machine_is_compatible("PowerMac7,2") &&
- !machine_is_compatible("PowerMac7,3") &&
- !machine_is_compatible("RackMac3,1"))
- return;
-
/* Look for the clock chip */
while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
p = of_get_parent(cc);
@@ -561,114 +569,64 @@ static void __init smp_core99_setup(int ncpus)
if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd2;
- printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+ name = "Pulsar";
} else if (device_is_compatible(cc, "cy28508")) {
pmac_tb_freeze = smp_core99_cypress_tb_freeze;
- printk(KERN_INFO "Timebase clock is Cypress chip\n");
+ name = "Cypress";
}
break;
case 0xd4:
pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
pmac_tb_pulsar_addr = 0xd4;
- printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+ name = "Pulsar";
break;
}
- if (pmac_tb_freeze != NULL) {
- pmac_tb_clock_chip_host = of_get_parent(cc);
- of_node_put(cc);
+ if (pmac_tb_freeze != NULL)
break;
- }
}
- if (pmac_tb_freeze == NULL) {
- smp_ops->give_timebase = smp_generic_give_timebase;
- smp_ops->take_timebase = smp_generic_take_timebase;
+ if (pmac_tb_freeze != NULL) {
+ struct device_node *p = of_get_parent(cc);
+ of_node_put(cc);
+ while(p && strcmp(p->type, "i2c")) {
+ cc = of_get_parent(p);
+ of_node_put(p);
+ p = cc;
+ }
+ if (p == NULL)
+ goto no_i2c_sync;
+ /* Open i2c bus for synchronous access */
+ if (pmac_low_i2c_open(p, 0)) {
+ printk(KERN_ERR "Failed top open i2c bus %s for clock"
+ " sync, fallback to software sync !\n",
+ p->full_name);
+ of_node_put(p);
+ goto no_i2c_sync;
+ }
+ pmac_tb_clock_chip_host = p;
+ printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
+ name);
+ return;
}
+ no_i2c_sync:
+ pmac_tb_freeze = NULL;
}
-/* nothing to do here, caches are already set up by service processor */
-static inline void __devinit core99_init_caches(int cpu)
-{
-}
+#endif /* CONFIG_PPC64 */
-#else /* CONFIG_PPC64 */
/*
- * SMP G4 powermacs use a GPIO to enable/disable the timebase.
+ * SMP G4 and newer G5 use a GPIO to enable/disable the timebase.
*/
static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */
-static unsigned int pri_tb_hi, pri_tb_lo;
-static unsigned int pri_tb_stamp;
-
-/* not __init, called in sleep/wakeup code */
-void smp_core99_give_timebase(void)
+static void smp_core99_gpio_tb_freeze(int freeze)
{
- unsigned long flags;
- unsigned int t;
-
- /* wait for the secondary to be in take_timebase */
- for (t = 100000; t > 0 && !sec_tb_reset; --t)
- udelay(10);
- if (!sec_tb_reset) {
- printk(KERN_WARNING "Timeout waiting sync on second CPU\n");
- return;
- }
-
- /* freeze the timebase and read it */
- /* disable interrupts so the timebase is disabled for the
- shortest possible time */
- local_irq_save(flags);
- pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+ if (freeze)
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+ else
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
- mb();
- pri_tb_hi = get_tbu();
- pri_tb_lo = get_tbl();
- pri_tb_stamp = last_jiffy_stamp(smp_processor_id());
- mb();
-
- /* tell the secondary we're ready */
- sec_tb_reset = 2;
- mb();
-
- /* wait for the secondary to have taken it */
- /* note: can't use udelay here, since it needs the timebase running */
- for (t = 10000000; t > 0 && sec_tb_reset; --t)
- barrier();
- if (sec_tb_reset)
- /* XXX BUG_ON here? */
- printk(KERN_WARNING "Timeout waiting sync(2) on second CPU\n");
-
- /* Now, restart the timebase by leaving the GPIO to an open collector */
- pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
- pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
- local_irq_restore(flags);
-}
-
-/* not __init, called in sleep/wakeup code */
-void smp_core99_take_timebase(void)
-{
- unsigned long flags;
-
- /* tell the primary we're here */
- sec_tb_reset = 1;
- mb();
-
- /* wait for the primary to set pri_tb_hi/lo */
- while (sec_tb_reset < 2)
- mb();
-
- /* set our stuff the same as the primary */
- local_irq_save(flags);
- set_dec(1);
- set_tb(pri_tb_hi, pri_tb_lo);
- last_jiffy_stamp(smp_processor_id()) = pri_tb_stamp;
- mb();
-
- /* tell the primary we're done */
- sec_tb_reset = 0;
- mb();
- local_irq_restore(flags);
}
/* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
@@ -677,6 +635,7 @@ volatile static long int core99_l3_cache;
static void __devinit core99_init_caches(int cpu)
{
+#ifndef CONFIG_PPC64
if (!cpu_has_feature(CPU_FTR_L2CR))
return;
@@ -702,30 +661,80 @@ static void __devinit core99_init_caches(int cpu)
_set_L3CR(core99_l3_cache);
printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
}
+#endif /* !CONFIG_PPC64 */
}
static void __init smp_core99_setup(int ncpus)
{
- struct device_node *cpu;
- u32 *tbprop = NULL;
- int i;
+#ifdef CONFIG_PPC64
- core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
- cpu = of_find_node_by_type(NULL, "cpu");
- if (cpu != NULL) {
- tbprop = (u32 *)get_property(cpu, "timebase-enable", NULL);
- if (tbprop)
- core99_tb_gpio = *tbprop;
- of_node_put(cpu);
+ /* i2c based HW sync on some G5s */
+ if (machine_is_compatible("PowerMac7,2") ||
+ machine_is_compatible("PowerMac7,3") ||
+ machine_is_compatible("RackMac3,1"))
+ smp_core99_setup_i2c_hwsync(ncpus);
+
+ /* GPIO based HW sync on recent G5s */
+ if (pmac_tb_freeze == NULL) {
+ struct device_node *np =
+ of_find_node_by_name(NULL, "timebase-enable");
+ u32 *reg = (u32 *)get_property(np, "reg", NULL);
+
+ if (np && reg && !strcmp(np->type, "gpio")) {
+ core99_tb_gpio = *reg;
+ if (core99_tb_gpio < 0x50)
+ core99_tb_gpio += 0x50;
+ pmac_tb_freeze = smp_core99_gpio_tb_freeze;
+ printk(KERN_INFO "Processor timebase sync using"
+ " GPIO 0x%02x\n", core99_tb_gpio);
+ }
}
- /* XXX should get this from reg properties */
- for (i = 1; i < ncpus; ++i)
- smp_hw_index[i] = i;
- powersave_nap = 0;
-}
+#else /* CONFIG_PPC64 */
+
+ /* GPIO based HW sync on ppc32 Core99 */
+ if (pmac_tb_freeze == NULL && !machine_is_compatible("MacRISC4")) {
+ struct device_node *cpu;
+ u32 *tbprop = NULL;
+
+ core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != NULL) {
+ tbprop = (u32 *)get_property(cpu, "timebase-enable",
+ NULL);
+ if (tbprop)
+ core99_tb_gpio = *tbprop;
+ of_node_put(cpu);
+ }
+ pmac_tb_freeze = smp_core99_gpio_tb_freeze;
+ printk(KERN_INFO "Processor timebase sync using"
+ " GPIO 0x%02x\n", core99_tb_gpio);
+ }
+
+#endif /* CONFIG_PPC64 */
+
+ /* No timebase sync, fallback to software */
+ if (pmac_tb_freeze == NULL) {
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
+ printk(KERN_INFO "Processor timebase sync using software\n");
+ }
+
+#ifndef CONFIG_PPC64
+ {
+ int i;
+
+ /* XXX should get this from reg properties */
+ for (i = 1; i < ncpus; ++i)
+ smp_hw_index[i] = i;
+ }
#endif
+ /* 32 bits SMP can't NAP */
+ if (!machine_is_compatible("MacRISC4"))
+ powersave_nap = 0;
+}
+
static int __init smp_core99_probe(void)
{
struct device_node *cpus;
@@ -803,17 +812,25 @@ static void __devinit smp_core99_setup_cpu(int cpu_nr)
mpic_setup_this_cpu();
if (cpu_nr == 0) {
-#ifdef CONFIG_POWER4
+#ifdef CONFIG_PPC64
extern void g5_phy_disable_cpu1(void);
+ /* Close i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host) {
+ pmac_low_i2c_close(pmac_tb_clock_chip_host);
+ pmac_tb_clock_chip_host = NULL;
+ }
+
/* If we didn't start the second CPU, we must take
* it off the bus
*/
if (machine_is_compatible("MacRISC4") &&
num_online_cpus() < 2)
g5_phy_disable_cpu1();
-#endif /* CONFIG_POWER4 */
- if (ppc_md.progress) ppc_md.progress("core99_setup_cpu 0 done", 0x349);
+#endif /* CONFIG_PPC64 */
+
+ if (ppc_md.progress)
+ ppc_md.progress("core99_setup_cpu 0 done", 0x349);
}
}
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index b3e3636a57b..14b9abde2d2 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,6 +4,6 @@ obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_40x) += dcr.o
-obj-$(CONFIG_U3_DART) += u3_iommu.o
+obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_83xx) += ipic.o
diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h
index 33ed9ed7fc1..c2d05763ccb 100644
--- a/arch/powerpc/sysdev/dart.h
+++ b/arch/powerpc/sysdev/dart.h
@@ -20,29 +20,44 @@
#define _POWERPC_SYSDEV_DART_H
-/* physical base of DART registers */
-#define DART_BASE 0xf8033000UL
-
/* Offset from base to control register */
-#define DARTCNTL 0
+#define DART_CNTL 0
+
/* Offset from base to exception register */
-#define DARTEXCP 0x10
+#define DART_EXCP_U3 0x10
/* Offset from base to TLB tag registers */
-#define DARTTAG 0x1000
+#define DART_TAGS_U3 0x1000
+/* U4 registers */
+#define DART_BASE_U4 0x10
+#define DART_SIZE_U4 0x20
+#define DART_EXCP_U4 0x30
+#define DART_TAGS_U4 0x1000
/* Control Register fields */
-/* base address of table (pfn) */
-#define DARTCNTL_BASE_MASK 0xfffff
-#define DARTCNTL_BASE_SHIFT 12
+/* U3 registers */
+#define DART_CNTL_U3_BASE_MASK 0xfffff
+#define DART_CNTL_U3_BASE_SHIFT 12
+#define DART_CNTL_U3_FLUSHTLB 0x400
+#define DART_CNTL_U3_ENABLE 0x200
+#define DART_CNTL_U3_SIZE_MASK 0x1ff
+#define DART_CNTL_U3_SIZE_SHIFT 0
+
+/* U4 registers */
+#define DART_BASE_U4_BASE_MASK 0xffffff
+#define DART_BASE_U4_BASE_SHIFT 0
+#define DART_CNTL_U4_FLUSHTLB 0x20000000
+#define DART_CNTL_U4_ENABLE 0x80000000
+#define DART_SIZE_U4_SIZE_MASK 0x1fff
+#define DART_SIZE_U4_SIZE_SHIFT 0
+
+#define DART_REG(r) (dart + ((r) >> 2))
+#define DART_IN(r) (in_be32(DART_REG(r)))
+#define DART_OUT(r,v) (out_be32(DART_REG(r), (v)))
-#define DARTCNTL_FLUSHTLB 0x400
-#define DARTCNTL_ENABLE 0x200
/* size of table in pages */
-#define DARTCNTL_SIZE_MASK 0x1ff
-#define DARTCNTL_SIZE_SHIFT 0
/* DART table fields */
diff --git a/arch/powerpc/sysdev/u3_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 5c1a26a6d00..df0dbdee762 100644
--- a/arch/powerpc/sysdev/u3_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -1,25 +1,27 @@
/*
- * arch/powerpc/sysdev/u3_iommu.c
+ * arch/powerpc/sysdev/dart_iommu.c
*
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * Copyright (C) 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>,
+ * IBM Corporation
*
* Based on pSeries_iommu.c:
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
* Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
*
- * Dynamic DMA mapping support, Apple U3 & IBM CPC925 "DART" iommu.
+ * Dynamic DMA mapping support, Apple U3, U4 & IBM CPC925 "DART" iommu.
+ *
*
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
+ *
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
+ *
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
@@ -57,21 +59,22 @@ static unsigned long dart_tablesize;
static u32 *dart_vbase;
/* Mapped base address for the dart */
-static unsigned int *dart;
+static unsigned int *__iomem dart;
/* Dummy val that entries are set to when unused */
static unsigned int dart_emptyval;
-static struct iommu_table iommu_table_u3;
-static int iommu_table_u3_inited;
+static struct iommu_table iommu_table_dart;
+static int iommu_table_dart_inited;
static int dart_dirty;
+static int dart_is_u4;
#define DBG(...)
static inline void dart_tlb_invalidate_all(void)
{
unsigned long l = 0;
- unsigned int reg;
+ unsigned int reg, inv_bit;
unsigned long limit;
DBG("dart: flush\n");
@@ -81,29 +84,28 @@ static inline void dart_tlb_invalidate_all(void)
*
* Gotcha: Sometimes, the DART won't detect that the bit gets
* set. If so, clear it and set it again.
- */
+ */
limit = 0;
+ inv_bit = dart_is_u4 ? DART_CNTL_U4_FLUSHTLB : DART_CNTL_U3_FLUSHTLB;
retry:
- reg = in_be32((unsigned int *)dart+DARTCNTL);
- reg |= DARTCNTL_FLUSHTLB;
- out_be32((unsigned int *)dart+DARTCNTL, reg);
-
l = 0;
- while ((in_be32((unsigned int *)dart+DARTCNTL) & DARTCNTL_FLUSHTLB) &&
- l < (1L<<limit)) {
+ reg = DART_IN(DART_CNTL);
+ reg |= inv_bit;
+ DART_OUT(DART_CNTL, reg);
+
+ while ((DART_IN(DART_CNTL) & inv_bit) && l < (1L << limit))
l++;
- }
- if (l == (1L<<limit)) {
+ if (l == (1L << limit)) {
if (limit < 4) {
limit++;
- reg = in_be32((unsigned int *)dart+DARTCNTL);
- reg &= ~DARTCNTL_FLUSHTLB;
- out_be32((unsigned int *)dart+DARTCNTL, reg);
+ reg = DART_IN(DART_CNTL);
+ reg &= ~inv_bit;
+ DART_OUT(DART_CNTL, reg);
goto retry;
} else
- panic("U3-DART: TLB did not flush after waiting a long "
+ panic("DART: TLB did not flush after waiting a long "
"time. Buggy U3 ?");
}
}
@@ -115,7 +117,7 @@ static void dart_flush(struct iommu_table *tbl)
dart_dirty = 0;
}
-static void dart_build(struct iommu_table *tbl, long index,
+static void dart_build(struct iommu_table *tbl, long index,
long npages, unsigned long uaddr,
enum dma_data_direction direction)
{
@@ -128,7 +130,7 @@ static void dart_build(struct iommu_table *tbl, long index,
npages <<= DART_PAGE_FACTOR;
dp = ((unsigned int*)tbl->it_base) + index;
-
+
/* On U3, all memory is contigous, so we can move this
* out of the loop.
*/
@@ -148,7 +150,7 @@ static void dart_build(struct iommu_table *tbl, long index,
static void dart_free(struct iommu_table *tbl, long index, long npages)
{
unsigned int *dp;
-
+
/* We don't worry about flushing the TLB cache. The only drawback of
* not doing it is that we won't catch buggy device drivers doing
* bad DMAs, but then no 32-bit architecture ever does either.
@@ -160,7 +162,7 @@ static void dart_free(struct iommu_table *tbl, long index, long npages)
npages <<= DART_PAGE_FACTOR;
dp = ((unsigned int *)tbl->it_base) + index;
-
+
while (npages--)
*(dp++) = dart_emptyval;
}
@@ -168,20 +170,25 @@ static void dart_free(struct iommu_table *tbl, long index, long npages)
static int dart_init(struct device_node *dart_node)
{
- unsigned int regword;
unsigned int i;
- unsigned long tmp;
+ unsigned long tmp, base, size;
+ struct resource r;
if (dart_tablebase == 0 || dart_tablesize == 0) {
- printk(KERN_INFO "U3-DART: table not allocated, using direct DMA\n");
+ printk(KERN_INFO "DART: table not allocated, using "
+ "direct DMA\n");
return -ENODEV;
}
+ if (of_address_to_resource(dart_node, 0, &r))
+ panic("DART: can't get register base ! ");
+
/* Make sure nothing from the DART range remains in the CPU cache
* from a previous mapping that existed before the kernel took
* over
*/
- flush_dcache_phys_range(dart_tablebase, dart_tablebase + dart_tablesize);
+ flush_dcache_phys_range(dart_tablebase,
+ dart_tablebase + dart_tablesize);
/* Allocate a spare page to map all invalid DART pages. We need to do
* that to work around what looks like a problem with the HT bridge
@@ -189,21 +196,16 @@ static int dart_init(struct device_node *dart_node)
*/
tmp = lmb_alloc(DART_PAGE_SIZE, DART_PAGE_SIZE);
if (!tmp)
- panic("U3-DART: Cannot allocate spare page!");
- dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) & DARTMAP_RPNMASK);
+ panic("DART: Cannot allocate spare page!");
+ dart_emptyval = DARTMAP_VALID | ((tmp >> DART_PAGE_SHIFT) &
+ DARTMAP_RPNMASK);
- /* Map in DART registers. FIXME: Use device node to get base address */
- dart = ioremap(DART_BASE, 0x7000);
+ /* Map in DART registers */
+ dart = ioremap(r.start, r.end - r.start + 1);
if (dart == NULL)
- panic("U3-DART: Cannot map registers!");
+ panic("DART: Cannot map registers!");
- /* Set initial control register contents: table base,
- * table size and enable bit
- */
- regword = DARTCNTL_ENABLE |
- ((dart_tablebase >> DART_PAGE_SHIFT) << DARTCNTL_BASE_SHIFT) |
- (((dart_tablesize >> DART_PAGE_SHIFT) & DARTCNTL_SIZE_MASK)
- << DARTCNTL_SIZE_SHIFT);
+ /* Map in DART table */
dart_vbase = ioremap(virt_to_abs(dart_tablebase), dart_tablesize);
/* Fill initial table */
@@ -211,36 +213,50 @@ static int dart_init(struct device_node *dart_node)
dart_vbase[i] = dart_emptyval;
/* Initialize DART with table base and enable it. */
- out_be32((unsigned int *)dart, regword);
+ base = dart_tablebase >> DART_PAGE_SHIFT;
+ size = dart_tablesize >> DART_PAGE_SHIFT;
+ if (dart_is_u4) {
+ BUG_ON(size & ~DART_SIZE_U4_SIZE_MASK);
+ DART_OUT(DART_BASE_U4, base);
+ DART_OUT(DART_SIZE_U4, size);
+ DART_OUT(DART_CNTL, DART_CNTL_U4_ENABLE);
+ } else {
+ BUG_ON(size & ~DART_CNTL_U3_SIZE_MASK);
+ DART_OUT(DART_CNTL,
+ DART_CNTL_U3_ENABLE |
+ (base << DART_CNTL_U3_BASE_SHIFT) |
+ (size << DART_CNTL_U3_SIZE_SHIFT));
+ }
/* Invalidate DART to get rid of possible stale TLBs */
dart_tlb_invalidate_all();
- printk(KERN_INFO "U3/CPC925 DART IOMMU initialized\n");
+ printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
+ dart_is_u4 ? "U4" : "U3");
return 0;
}
-static void iommu_table_u3_setup(void)
+static void iommu_table_dart_setup(void)
{
- iommu_table_u3.it_busno = 0;
- iommu_table_u3.it_offset = 0;
+ iommu_table_dart.it_busno = 0;
+ iommu_table_dart.it_offset = 0;
/* it_size is in number of entries */
- iommu_table_u3.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
+ iommu_table_dart.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR;
/* Initialize the common IOMMU code */
- iommu_table_u3.it_base = (unsigned long)dart_vbase;
- iommu_table_u3.it_index = 0;
- iommu_table_u3.it_blocksize = 1;
- iommu_init_table(&iommu_table_u3);
+ iommu_table_dart.it_base = (unsigned long)dart_vbase;
+ iommu_table_dart.it_index = 0;
+ iommu_table_dart.it_blocksize = 1;
+ iommu_init_table(&iommu_table_dart);
/* Reserve the last page of the DART to avoid possible prefetch
* past the DART mapped area
*/
- set_bit(iommu_table_u3.it_size - 1, iommu_table_u3.it_map);
+ set_bit(iommu_table_dart.it_size - 1, iommu_table_dart.it_map);
}
-static void iommu_dev_setup_u3(struct pci_dev *dev)
+static void iommu_dev_setup_dart(struct pci_dev *dev)
{
struct device_node *dn;
@@ -254,35 +270,39 @@ static void iommu_dev_setup_u3(struct pci_dev *dev)
dn = pci_device_to_OF_node(dev);
if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_u3;
+ PCI_DN(dn)->iommu_table = &iommu_table_dart;
}
-static void iommu_bus_setup_u3(struct pci_bus *bus)
+static void iommu_bus_setup_dart(struct pci_bus *bus)
{
struct device_node *dn;
- if (!iommu_table_u3_inited) {
- iommu_table_u3_inited = 1;
- iommu_table_u3_setup();
+ if (!iommu_table_dart_inited) {
+ iommu_table_dart_inited = 1;
+ iommu_table_dart_setup();
}
dn = pci_bus_to_OF_node(bus);
if (dn)
- PCI_DN(dn)->iommu_table = &iommu_table_u3;
+ PCI_DN(dn)->iommu_table = &iommu_table_dart;
}
static void iommu_dev_setup_null(struct pci_dev *dev) { }
static void iommu_bus_setup_null(struct pci_bus *bus) { }
-void iommu_init_early_u3(void)
+void iommu_init_early_dart(void)
{
struct device_node *dn;
/* Find the DART in the device-tree */
dn = of_find_compatible_node(NULL, "dart", "u3-dart");
- if (dn == NULL)
- return;
+ if (dn == NULL) {
+ dn = of_find_compatible_node(NULL, "dart", "u4-dart");
+ if (dn == NULL)
+ goto bail;
+ dart_is_u4 = 1;
+ }
/* Setup low level TCE operations for the core IOMMU code */
ppc_md.tce_build = dart_build;
@@ -290,24 +310,27 @@ void iommu_init_early_u3(void)
ppc_md.tce_flush = dart_flush;
/* Initialize the DART HW */
- if (dart_init(dn)) {
- /* If init failed, use direct iommu and null setup functions */
- ppc_md.iommu_dev_setup = iommu_dev_setup_null;
- ppc_md.iommu_bus_setup = iommu_bus_setup_null;
-
- /* Setup pci_dma ops */
- pci_direct_iommu_init();
- } else {
- ppc_md.iommu_dev_setup = iommu_dev_setup_u3;
- ppc_md.iommu_bus_setup = iommu_bus_setup_u3;
+ if (dart_init(dn) == 0) {
+ ppc_md.iommu_dev_setup = iommu_dev_setup_dart;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_dart;
/* Setup pci_dma ops */
pci_iommu_init();
+
+ return;
}
+
+ bail:
+ /* If init failed, use direct iommu and null setup functions */
+ ppc_md.iommu_dev_setup = iommu_dev_setup_null;
+ ppc_md.iommu_bus_setup = iommu_bus_setup_null;
+
+ /* Setup pci_dma ops */
+ pci_direct_iommu_init();
}
-void __init alloc_u3_dart_table(void)
+void __init alloc_dart_table(void)
{
/* Only reserve DART space if machine has more than 2GB of RAM
* or if requested with iommu=on on cmdline.
@@ -323,5 +346,5 @@ void __init alloc_u3_dart_table(void)
dart_tablebase = (unsigned long)
abs_to_virt(lmb_alloc_base(1UL<<24, 1UL<<24, 0x80000000L));
- printk(KERN_INFO "U3-DART allocated at: %lx\n", dart_tablebase);
+ printk(KERN_INFO "DART table allocated at: %lx\n", dart_tablebase);
}
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 9513ea78e6c..4f26304d026 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -13,6 +13,9 @@
*/
#undef DEBUG
+#undef DEBUG_IPI
+#undef DEBUG_IRQ
+#undef DEBUG_LOW
#include <linux/config.h>
#include <linux/types.h>
@@ -168,35 +171,86 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic)
/* Test if an interrupt is sourced from HyperTransport (used on broken U3s)
* to force the edge setting on the MPIC and do the ack workaround.
*/
-static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source_no)
+static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source)
{
- if (source_no >= 128 || !mpic->fixups)
+ if (source >= 128 || !mpic->fixups)
return 0;
- return mpic->fixups[source_no].base != NULL;
+ return mpic->fixups[source].base != NULL;
}
-static inline void mpic_apic_end_irq(struct mpic *mpic, unsigned int source_no)
+static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source)
{
- struct mpic_irq_fixup *fixup = &mpic->fixups[source_no];
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source];
- spin_lock(&mpic->fixup_lock);
- writeb(0x11 + 2 * fixup->irq, fixup->base + 2);
- writel(fixup->data, fixup->base + 4);
- spin_unlock(&mpic->fixup_lock);
+ if (fixup->applebase) {
+ unsigned int soff = (fixup->index >> 3) & ~3;
+ unsigned int mask = 1U << (fixup->index & 0x1f);
+ writel(mask, fixup->applebase + soff);
+ } else {
+ spin_lock(&mpic->fixup_lock);
+ writeb(0x11 + 2 * fixup->index, fixup->base + 2);
+ writel(fixup->data, fixup->base + 4);
+ spin_unlock(&mpic->fixup_lock);
+ }
}
+static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source,
+ unsigned int irqflags)
+{
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source];
+ unsigned long flags;
+ u32 tmp;
+
+ if (fixup->base == NULL)
+ return;
+
+ DBG("startup_ht_interrupt(%u, %u) index: %d\n",
+ source, irqflags, fixup->index);
+ spin_lock_irqsave(&mpic->fixup_lock, flags);
+ /* Enable and configure */
+ writeb(0x10 + 2 * fixup->index, fixup->base + 2);
+ tmp = readl(fixup->base + 4);
+ tmp &= ~(0x23U);
+ if (irqflags & IRQ_LEVEL)
+ tmp |= 0x22;
+ writel(tmp, fixup->base + 4);
+ spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+}
+
+static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source,
+ unsigned int irqflags)
+{
+ struct mpic_irq_fixup *fixup = &mpic->fixups[source];
+ unsigned long flags;
+ u32 tmp;
+
+ if (fixup->base == NULL)
+ return;
+
+ DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags);
+
+ /* Disable */
+ spin_lock_irqsave(&mpic->fixup_lock, flags);
+ writeb(0x10 + 2 * fixup->index, fixup->base + 2);
+ tmp = readl(fixup->base + 4);
+ tmp &= ~1U;
+ writel(tmp, fixup->base + 4);
+ spin_unlock_irqrestore(&mpic->fixup_lock, flags);
+}
-static void __init mpic_scan_ioapic(struct mpic *mpic, u8 __iomem *devbase)
+static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase,
+ unsigned int devfn, u32 vdid)
{
int i, irq, n;
+ u8 __iomem *base;
u32 tmp;
u8 pos;
- for (pos = readb(devbase + 0x34); pos; pos = readb(devbase + pos + 1)) {
- u8 id = readb(devbase + pos);
-
- if (id == 0x08) {
+ for (pos = readb(devbase + PCI_CAPABILITY_LIST); pos != 0;
+ pos = readb(devbase + pos + PCI_CAP_LIST_NEXT)) {
+ u8 id = readb(devbase + pos + PCI_CAP_LIST_ID);
+ if (id == PCI_CAP_ID_HT_IRQCONF) {
id = readb(devbase + pos + 3);
if (id == 0x80)
break;
@@ -205,33 +259,41 @@ static void __init mpic_scan_ioapic(struct mpic *mpic, u8 __iomem *devbase)
if (pos == 0)
return;
- printk(KERN_INFO "mpic: - Workarounds @ %p, pos = 0x%02x\n", devbase, pos);
+ base = devbase + pos;
+ writeb(0x01, base + 2);
+ n = (readl(base + 4) >> 16) & 0xff;
- devbase += pos;
-
- writeb(0x01, devbase + 2);
- n = (readl(devbase + 4) >> 16) & 0xff;
+ printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x"
+ " has %d irqs\n",
+ devfn >> 3, devfn & 0x7, pos, vdid & 0xffff, vdid >> 16, n + 1);
for (i = 0; i <= n; i++) {
- writeb(0x10 + 2 * i, devbase + 2);
- tmp = readl(devbase + 4);
- if ((tmp & 0x21) != 0x20)
- continue;
+ writeb(0x10 + 2 * i, base + 2);
+ tmp = readl(base + 4);
irq = (tmp >> 16) & 0xff;
- mpic->fixups[irq].irq = i;
- mpic->fixups[irq].base = devbase;
- writeb(0x11 + 2 * i, devbase + 2);
- mpic->fixups[irq].data = readl(devbase + 4) | 0x80000000;
+ DBG("HT PIC index 0x%x, irq 0x%x, tmp: %08x\n", i, irq, tmp);
+ /* mask it , will be unmasked later */
+ tmp |= 0x1;
+ writel(tmp, base + 4);
+ mpic->fixups[irq].index = i;
+ mpic->fixups[irq].base = base;
+ /* Apple HT PIC has a non-standard way of doing EOIs */
+ if ((vdid & 0xffff) == 0x106b)
+ mpic->fixups[irq].applebase = devbase + 0x60;
+ else
+ mpic->fixups[irq].applebase = NULL;
+ writeb(0x11 + 2 * i, base + 2);
+ mpic->fixups[irq].data = readl(base + 4) | 0x80000000;
}
}
-static void __init mpic_scan_ioapics(struct mpic *mpic)
+static void __init mpic_scan_ht_pics(struct mpic *mpic)
{
unsigned int devfn;
u8 __iomem *cfgspace;
- printk(KERN_INFO "mpic: Setting up IO-APICs workarounds for U3\n");
+ printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
/* Allocate fixups array */
mpic->fixups = alloc_bootmem(128 * sizeof(struct mpic_irq_fixup));
@@ -247,13 +309,14 @@ static void __init mpic_scan_ioapics(struct mpic *mpic)
cfgspace = ioremap(0xf2000000, 0x10000);
BUG_ON(cfgspace == NULL);
- /* Now we scan all slots. We do a very quick scan, we read the header type,
- * vendor ID and device ID only, that's plenty enough
+ /* Now we scan all slots. We do a very quick scan, we read the header
+ * type, vendor ID and device ID only, that's plenty enough
*/
for (devfn = 0; devfn < 0x100; devfn++) {
u8 __iomem *devbase = cfgspace + (devfn << 8);
u8 hdr_type = readb(devbase + PCI_HEADER_TYPE);
u32 l = readl(devbase + PCI_VENDOR_ID);
+ u16 s;
DBG("devfn %x, l: %x\n", devfn, l);
@@ -261,8 +324,12 @@ static void __init mpic_scan_ioapics(struct mpic *mpic)
if (l == 0xffffffff || l == 0x00000000 ||
l == 0x0000ffff || l == 0xffff0000)
goto next;
+ /* Check if is supports capability lists */
+ s = readw(devbase + PCI_STATUS);
+ if (!(s & PCI_STATUS_CAP_LIST))
+ goto next;
- mpic_scan_ioapic(mpic, devbase);
+ mpic_scan_ht_pic(mpic, devbase, devfn, l);
next:
/* next device, if function 0 */
@@ -363,6 +430,31 @@ static void mpic_enable_irq(unsigned int irq)
break;
}
} while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK);
+
+#ifdef CONFIG_MPIC_BROKEN_U3
+ if (mpic->flags & MPIC_BROKEN_U3) {
+ unsigned int src = irq - mpic->irq_offset;
+ if (mpic_is_ht_interrupt(mpic, src) &&
+ (irq_desc[irq].status & IRQ_LEVEL))
+ mpic_ht_end_irq(mpic, src);
+ }
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+}
+
+static unsigned int mpic_startup_irq(unsigned int irq)
+{
+#ifdef CONFIG_MPIC_BROKEN_U3
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = irq - mpic->irq_offset;
+
+ if (mpic_is_ht_interrupt(mpic, src))
+ mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ mpic_enable_irq(irq);
+
+ return 0;
}
static void mpic_disable_irq(unsigned int irq)
@@ -386,12 +478,27 @@ static void mpic_disable_irq(unsigned int irq)
} while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK));
}
+static void mpic_shutdown_irq(unsigned int irq)
+{
+#ifdef CONFIG_MPIC_BROKEN_U3
+ struct mpic *mpic = mpic_from_irq(irq);
+ unsigned int src = irq - mpic->irq_offset;
+
+ if (mpic_is_ht_interrupt(mpic, src))
+ mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+
+#endif /* CONFIG_MPIC_BROKEN_U3 */
+
+ mpic_disable_irq(irq);
+}
+
static void mpic_end_irq(unsigned int irq)
{
struct mpic *mpic = mpic_from_irq(irq);
+#ifdef DEBUG_IRQ
DBG("%s: end_irq: %d\n", mpic->name, irq);
-
+#endif
/* We always EOI on end_irq() even for edge interrupts since that
* should only lower the priority, the MPIC should have properly
* latched another edge interrupt coming in anyway
@@ -400,8 +507,9 @@ static void mpic_end_irq(unsigned int irq)
#ifdef CONFIG_MPIC_BROKEN_U3
if (mpic->flags & MPIC_BROKEN_U3) {
unsigned int src = irq - mpic->irq_offset;
- if (mpic_is_ht_interrupt(mpic, src))
- mpic_apic_end_irq(mpic, src);
+ if (mpic_is_ht_interrupt(mpic, src) &&
+ (irq_desc[irq].status & IRQ_LEVEL))
+ mpic_ht_end_irq(mpic, src);
}
#endif /* CONFIG_MPIC_BROKEN_U3 */
@@ -482,6 +590,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
mpic->name = name;
mpic->hc_irq.typename = name;
+ mpic->hc_irq.startup = mpic_startup_irq;
+ mpic->hc_irq.shutdown = mpic_shutdown_irq;
mpic->hc_irq.enable = mpic_enable_irq;
mpic->hc_irq.disable = mpic_disable_irq;
mpic->hc_irq.end = mpic_end_irq;
@@ -650,10 +760,10 @@ void __init mpic_init(struct mpic *mpic)
mpic->irq_count = mpic->num_sources;
#ifdef CONFIG_MPIC_BROKEN_U3
- /* Do the ioapic fixups on U3 broken mpic */
+ /* Do the HT PIC fixups on U3 broken mpic */
DBG("MPIC flags: %x\n", mpic->flags);
if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY))
- mpic_scan_ioapics(mpic);
+ mpic_scan_ht_pics(mpic);
#endif /* CONFIG_MPIC_BROKEN_U3 */
for (i = 0; i < mpic->num_sources; i++) {
@@ -840,7 +950,9 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask)
BUG_ON(mpic == NULL);
+#ifdef DEBUG_IPI
DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no);
+#endif
mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10,
mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0]));
@@ -851,19 +963,28 @@ int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs)
u32 irq;
irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK;
+#ifdef DEBUG_LOW
DBG("%s: get_one_irq(): %d\n", mpic->name, irq);
-
+#endif
if (mpic->cascade && irq == mpic->cascade_vec) {
+#ifdef DEBUG_LOW
DBG("%s: cascading ...\n", mpic->name);
+#endif
irq = mpic->cascade(regs, mpic->cascade_data);
mpic_eoi(mpic);
return irq;
}
if (unlikely(irq == MPIC_VEC_SPURRIOUS))
return -1;
- if (irq < MPIC_VEC_IPI_0)
+ if (irq < MPIC_VEC_IPI_0) {
+#ifdef DEBUG_IRQ
+ DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset);
+#endif
return irq + mpic->irq_offset;
+ }
+#ifdef DEBUG_IPI
DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0);
+#endif
return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset;
}
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index a8d3bc0a9c5..5013b1285e2 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1686,7 +1686,7 @@ pmac_ide_probe(void)
#else
macio_register_driver(&pmac_ide_macio_driver);
pci_register_driver(&pmac_ide_pci_driver);
-#endif
+#endif
}
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c
index e8378274d71..96226116a64 100644
--- a/drivers/macintosh/smu.c
+++ b/drivers/macintosh/smu.c
@@ -53,7 +53,7 @@
#undef DEBUG_SMU
#ifdef DEBUG_SMU
-#define DPRINTK(fmt, args...) do { udbg_printf(KERN_DEBUG fmt , ##args); } while (0)
+#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
#else
#define DPRINTK(fmt, args...) do { } while (0)
#endif
@@ -909,10 +909,13 @@ static struct smu_sdbp_header *smu_create_sdb_partition(int id)
struct property *prop;
/* First query the partition info */
+ DPRINTK("SMU: Query partition infos ... (irq=%d)\n", smu->db_irq);
smu_queue_simple(&cmd, SMU_CMD_PARTITION_COMMAND, 2,
smu_done_complete, &comp,
SMU_CMD_PARTITION_LATEST, id);
wait_for_completion(&comp);
+ DPRINTK("SMU: done, status: %d, reply_len: %d\n",
+ cmd.cmd.status, cmd.cmd.reply_len);
/* Partition doesn't exist (or other error) */
if (cmd.cmd.status != 0 || cmd.cmd.reply_len != 6)
@@ -975,6 +978,8 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
sprintf(pname, "sdb-partition-%02x", id);
+ DPRINTK("smu_get_sdb_partition(%02x)\n", id);
+
if (interruptible) {
int rc;
rc = down_interruptible(&smu_part_access);
@@ -986,6 +991,7 @@ struct smu_sdbp_header *__smu_get_sdb_partition(int id, unsigned int *size,
part = (struct smu_sdbp_header *)get_property(smu->of_node,
pname, size);
if (part == NULL) {
+ DPRINTK("trying to extract from SMU ...\n");
part = smu_create_sdb_partition(id);
if (part != NULL && size)
*size = part->len << 2;
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
index f89f0605089..59f06266899 100644
--- a/include/asm-powerpc/iommu.h
+++ b/include/asm-powerpc/iommu.h
@@ -56,7 +56,7 @@ struct device_node;
/* Walks all buses and creates iommu tables */
extern void iommu_setup_pSeries(void);
-extern void iommu_setup_u3(void);
+extern void iommu_setup_dart(void);
/* Frees table for an individual device node */
extern void iommu_free_table(struct device_node *dn);
@@ -104,7 +104,7 @@ extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
extern void iommu_init_early_pSeries(void);
extern void iommu_init_early_iSeries(void);
-extern void iommu_init_early_u3(void);
+extern void iommu_init_early_dart(void);
#ifdef CONFIG_PCI
extern void pci_iommu_init(void);
@@ -113,6 +113,6 @@ extern void pci_direct_iommu_init(void);
static inline void pci_iommu_init(void) { }
#endif
-extern void alloc_u3_dart_table(void);
+extern void alloc_dart_table(void);
#endif /* _ASM_IOMMU_H */
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index 6ce27e1b564..bf7e7179320 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -117,8 +117,9 @@ typedef int (*mpic_cascade_t)(struct pt_regs *regs, void *data);
struct mpic_irq_fixup
{
u8 __iomem *base;
+ u8 __iomem *applebase;
u32 data;
- unsigned int irq;
+ unsigned int index;
};
#endif /* CONFIG_MPIC_BROKEN_U3 */
diff --git a/include/asm-powerpc/pmac_feature.h b/include/asm-powerpc/pmac_feature.h
index e9683bcff19..f6997ed5179 100644
--- a/include/asm-powerpc/pmac_feature.h
+++ b/include/asm-powerpc/pmac_feature.h
@@ -121,6 +121,7 @@
#define PMAC_TYPE_IMAC_G5 0x152 /* iMac G5 */
#define PMAC_TYPE_XSERVE_G5 0x153 /* Xserve G5 */
#define PMAC_TYPE_UNKNOWN_K2 0x19f /* Any other K2 based */
+#define PMAC_TYPE_UNKNOWN_SHASTA 0x19e /* Any other Shasta based */
/*
* Motherboard flags
@@ -341,6 +342,7 @@ enum {
macio_pangea,
macio_intrepid,
macio_keylargo2,
+ macio_shasta,
};
struct macio_chip
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e2a089b051e..d27a78b7129 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -196,6 +196,7 @@
#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
+#define PCI_CAP_ID_HT_IRQCONF 0x08 /* HyperTransport IRQ Configuration */
#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-11-27 20:38:20 +0000