diff options
| -rw-r--r-- | arch/arm/plat-samsung/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/gpio-config.c | 431 | ||||
| -rw-r--r-- | arch/arm/plat-samsung/gpio.c | 167 | ||||
| -rw-r--r-- | drivers/gpio/Kconfig | 28 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 10 | ||||
| -rw-r--r-- | drivers/gpio/gpio-exynos4.c | 385 | ||||
| -rw-r--r-- | drivers/gpio/gpio-plat-samsung.c | 205 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s3c24xx.c | 283 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s3c64xx.c | 289 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s5p64x0.c | 510 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s5pc100.c | 354 | ||||
| -rw-r--r-- | drivers/gpio/gpio-s5pv210.c | 287 | ||||
| -rw-r--r-- | drivers/gpio/gpio-samsung.c | 2686 |
13 files changed, 2687 insertions, 2950 deletions
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 853764ba8cc..6d772d7c012 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,8 +15,6 @@ obj-y += init.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o -obj-y += gpio.o -obj-y += gpio-config.o obj-y += dev-asocdma.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c deleted file mode 100644 index 1c0b0401594..00000000000 --- a/arch/arm/plat-samsung/gpio-config.c +++ /dev/null @@ -1,431 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio-config.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO configuration core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - int ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setcfg(chip, offset, config); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_cfgpin); - -int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, - unsigned int cfg) -{ - int ret; - - for (; nr > 0; nr--, start++) { - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); - -int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull) -{ - int ret; - - for (; nr > 0; nr--, start++) { - s3c_gpio_setpull(start, pull); - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); - -unsigned s3c_gpio_getcfg(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - unsigned ret = 0; - int offset; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_getcfg(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_getcfg); - - -int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset, ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setpull(chip, offset, pull); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_setpull); - -s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - u32 pup = 0; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - pup = s3c_gpio_do_getpull(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return (__force s3c_gpio_pull_t)pup; -} -EXPORT_SYMBOL(s3c_gpio_getpull); - -#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - - /* Map output to 0, and SFN2 to 1 */ - cfg -= 1; - if (cfg > 1) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x1 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off; - con &= 1; - con++; - - return S3C_GPIO_SFN(con); -} - -int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off * 2; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - if (cfg > 3) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x3 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off * 2; - con &= 3; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} -#endif - -#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX -int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - con = __raw_readl(reg); - con >>= shift; - con &= 0xf; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} - -#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ - -#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN -int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup; - - pup = __raw_readl(reg); - pup &= ~(3 << shift); - pup |= pull << shift; - __raw_writel(pup, reg); - - return 0; -} - -s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup = __raw_readl(reg); - - pup >>= shift; - pup &= 0x3; - return (__force s3c_gpio_pull_t)pup; -} - -#ifdef CONFIG_S3C_GPIO_PULL_S3C2443 -int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - switch (pull) { - case S3C_GPIO_PULL_NONE: - pull = 0x01; - break; - case S3C_GPIO_PULL_UP: - pull = 0x00; - break; - case S3C_GPIO_PULL_DOWN: - pull = 0x02; - break; - } - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - - switch (pull) { - case 0x00: - pull = S3C_GPIO_PULL_UP; - break; - case 0x01: - case 0x03: - pull = S3C_GPIO_PULL_NONE; - break; - case 0x02: - pull = S3C_GPIO_PULL_DOWN; - break; - } - - return pull; -} -#endif -#endif - -#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN) -static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull, - s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - if (pull == updown) - pup &= ~(1 << off); - else if (pull == S3C_GPIO_PULL_NONE) - pup |= (1 << off); - else - return -EINVAL; - - __raw_writel(pup, reg); - return 0; -} - -static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : updown; -} -#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S3C_GPIO_PULL_UP -s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); -} - -int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); -} -#endif /* CONFIG_S3C_GPIO_PULL_UP */ - -#ifdef CONFIG_S3C_GPIO_PULL_DOWN -s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); -} - -int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); -} -#endif /* CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S5P_GPIO_DRVSTR -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 drvstr; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - drvstr = __raw_readl(reg); - drvstr = drvstr >> shift; - drvstr &= 0x3; - - return (__force s5p_gpio_drvstr_t)drvstr; -} -EXPORT_SYMBOL(s5p_gpio_get_drvstr); - -int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 tmp; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - tmp = __raw_readl(reg); - tmp &= ~(0x3 << shift); - tmp |= drvstr << shift; - - __raw_writel(tmp, reg); - - return 0; -} -EXPORT_SYMBOL(s5p_gpio_set_drvstr); -#endif /* CONFIG_S5P_GPIO_DRVSTR */ diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c deleted file mode 100644 index 7743c4b8b2f..00000000000 --- a/arch/arm/plat-samsung/gpio.c +++ /dev/null @@ -1,167 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/spinlock.h> - -#include <plat/gpio-core.h> - -#ifdef CONFIG_S3C_GPIO_TRACK -struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; - -static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) -{ - unsigned int gpn; - int i; - - gpn = chip->chip.base; - for (i = 0; i < chip->chip.ngpio; i++, gpn++) { - BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); - s3c_gpios[gpn] = chip; - } -} -#endif /* CONFIG_S3C_GPIO_TRACK */ - -/* Default routines for controlling GPIO, based on the original S3C24XX - * GPIO functions which deal with the case where each gpio bank of the - * chip is as following: - * - * base + 0x00: Control register, 2 bits per gpio - * gpio n: 2 bits starting at (2*n) - * 00 = input, 01 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n -*/ - -static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - - __raw_writel(con, base + 0x00); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static int s3c_gpiolib_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= 1 << (offset * 2); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static void s3c_gpiolib_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); -} - -static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - unsigned long val; - - val = __raw_readl(ourchip->base + 0x04); - val >>= offset; - val &= 1; - - return val; -} - -__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) -{ - struct gpio_chip *gc = &chip->chip; - int ret; - - BUG_ON(!chip->base); - BUG_ON(!gc->label); - BUG_ON(!gc->ngpio); - - spin_lock_init(&chip->lock); - - if (!gc->direction_input) - gc->direction_input = s3c_gpiolib_input; - if (!gc->direction_output) - gc->direction_output = s3c_gpiolib_output; - if (!gc->set) - gc->set = s3c_gpiolib_set; - if (!gc->get) - gc->get = s3c_gpiolib_get; - -#ifdef CONFIG_PM - if (chip->pm != NULL) { - if (!chip->pm->save || !chip->pm->resume) - printk(KERN_ERR "gpio: %s has missing PM functions\n", - gc->label); - } else - printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); -#endif - - /* gpiochip_add() prints own failure message on error. */ - ret = gpiochip_add(gc); - if (ret >= 0) - s3c_gpiolib_track(chip); -} - -int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - - return s3c_chip->irq_base + offset; -} diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 5eb29bc18a5..ca44d2cceb0 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -95,10 +95,6 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC -config GPIO_EXYNOS4 - def_bool y - depends on CPU_EXYNOS4210 - config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -131,30 +127,6 @@ config GPIO_MXS select GPIO_GENERIC select GENERIC_IRQ_CHIP -config GPIO_PLAT_SAMSUNG - def_bool y - depends on SAMSUNG_GPIOLIB_4BIT - -config GPIO_S3C24XX - def_bool y - depends on PLAT_S3C24XX - -config GPIO_S3C64XX - def_bool y - depends on ARCH_S3C64XX - -config GPIO_S5P64X0 - def_bool y - depends on ARCH_S5P64X0 - -config GPIO_S5PC100 - def_bool y - depends on CPU_S5PC100 - -config GPIO_S5PV210 - def_bool y - depends on CPU_S5PV210 - config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 10f3bbf0ece..62db458c850 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o -obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o @@ -38,14 +37,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o obj-$(CONFIG_GPIO_PCH) += gpio-pch.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o - -obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o -obj-$(CONFIG_GPIO_S3C24XX) += gpio-s3c24xx.o -obj-$(CONFIG_GPIO_S3C64XX) += gpio-s3c64xx.o -obj-$(CONFIG_GPIO_S5P64X0) += gpio-s5p64x0.o -obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o -obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o - +obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c deleted file mode 100644 index d24b337cf1a..00000000000 --- a/drivers/gpio/gpio-exynos4.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * EXYNOS4 - GPIOlib support - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - if (pull == S3C_GPIO_PULL_UP) - pull = 3; - - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - if (pull == 3) - pull = S3C_GPIO_PULL_UP; - - return pull; -} - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPA0(0), - .ngpio = EXYNOS4_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = EXYNOS4_GPA1(0), - .ngpio = EXYNOS4_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = EXYNOS4_GPB(0), - .ngpio = EXYNOS4_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = EXYNOS4_GPC0(0), - .ngpio = EXYNOS4_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = EXYNOS4_GPC1(0), - .ngpio = EXYNOS4_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = EXYNOS4_GPD0(0), - .ngpio = EXYNOS4_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = EXYNOS4_GPD1(0), - .ngpio = EXYNOS4_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE0(0), - .ngpio = EXYNOS4_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = EXYNOS4_GPE1(0), - .ngpio = EXYNOS4_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE2(0), - .ngpio = EXYNOS4_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = EXYNOS4_GPE3(0), - .ngpio = EXYNOS4_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = EXYNOS4_GPE4(0), - .ngpio = EXYNOS4_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = EXYNOS4_GPF0(0), - .ngpio = EXYNOS4_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = EXYNOS4_GPF1(0), - .ngpio = EXYNOS4_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = EXYNOS4_GPF2(0), - .ngpio = EXYNOS4_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = EXYNOS4_GPF3(0), - .ngpio = EXYNOS4_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPJ0(0), - .ngpio = EXYNOS4_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = EXYNOS4_GPJ1(0), - .ngpio = EXYNOS4_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK0(0), - .ngpio = EXYNOS4_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = EXYNOS4_GPK1(0), - .ngpio = EXYNOS4_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK2(0), - .ngpio = EXYNOS4_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = EXYNOS4_GPK3(0), - .ngpio = EXYNOS4_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = EXYNOS4_GPL0(0), - .ngpio = EXYNOS4_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = EXYNOS4_GPL1(0), - .ngpio = EXYNOS4_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = EXYNOS4_GPL2(0), - .ngpio = EXYNOS4_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY0(0), - .ngpio = EXYNOS4_GPIO_Y0_NR, - .label = "GPY0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY1(0), - .ngpio = EXYNOS4_GPIO_Y1_NR, - .label = "GPY1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY2(0), - .ngpio = EXYNOS4_GPIO_Y2_NR, - .label = "GPY2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY3(0), - .ngpio = EXYNOS4_GPIO_Y3_NR, - .label = "GPY3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY4(0), - .ngpio = EXYNOS4_GPIO_Y4_NR, - .label = "GPY4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY5(0), - .ngpio = EXYNOS4_GPIO_Y5_NR, - .label = "GPY5", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY6(0), - .ngpio = EXYNOS4_GPIO_Y6_NR, - .label = "GPY6", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = EXYNOS4_GPX0(0), - .ngpio = EXYNOS4_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = EXYNOS4_GPX1(0), - .ngpio = EXYNOS4_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = EXYNOS4_GPX2(0), - .ngpio = EXYNOS4_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = EXYNOS4_GPX3(0), - .ngpio = EXYNOS4_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPZ(0), - .ngpio = EXYNOS4_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int exynos4_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int group = 0; - int nr_chips; - - /* GPIO part 1 */ - - chip = exynos4_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = exynos4_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = exynos4_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); - s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); - - return 0; -} -core_initcall(exynos4_gpiolib_init); diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c deleted file mode 100644 index ef67f1952a7..00000000000 --- a/drivers/gpio/gpio-plat-samsung.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -#ifndef DEBUG_GPIO -#define gpio_dbg(x...) do { } while (0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, |