diff options
| -rw-r--r-- | drivers/gpio/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpio/gpio-sch311x.c | 431 |
3 files changed, 441 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 02e8d5350f8..f456b93bb95 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -244,6 +244,15 @@ config GPIO_SAMSUNG Legacy GPIO support. Use only for platforms without support for pinctrl. +config GPIO_SCH311X + tristate "SMSC SCH311x SuperI/O GPIO" + help + Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and + SCH3116 "Super I/O" chipsets. + + To compile this driver as a module, choose M here: the module will + be called gpio-sch311x. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 699e7cd9658..c44fffac951 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o obj-$(CONFIG_GPIO_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o +obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o obj-$(CONFIG_GPIO_STA2X11) += gpio-sta2x11.o diff --git a/drivers/gpio/gpio-sch311x.c b/drivers/gpio/gpio-sch311x.c new file mode 100644 index 00000000000..483a6f8bd95 --- /dev/null +++ b/drivers/gpio/gpio-sch311x.c @@ -0,0 +1,431 @@ +/* + * GPIO driver for the SMSC SCH311x Super-I/O chips + * + * Copyright (C) 2013 Bruno Randolf <br1@einfach.org> + * + * SuperIO functions and chip detection: + * (c) Copyright 2008 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/bitops.h> + +#define DRV_NAME "gpio-sch311x" + +#define SCH311X_GPIO_CONF_OUT 0x00 +#define SCH311X_GPIO_CONF_IN 0x01 +#define SCH311X_GPIO_CONF_INVERT 0x02 +#define SCH311X_GPIO_CONF_OPEN_DRAIN 0x80 + +#define SIO_CONFIG_KEY_ENTER 0x55 +#define SIO_CONFIG_KEY_EXIT 0xaa + +#define GP1 0x4b + +static int sch311x_ioports[] = { 0x2e, 0x4e, 0x162e, 0x164e }; + +static struct platform_device *sch311x_gpio_pdev; + +struct sch311x_pdev_data { /* platform device data */ + unsigned short runtime_reg; /* runtime register base address */ +}; + +struct sch311x_gpio_block { /* one GPIO block runtime data */ + struct gpio_chip chip; + unsigned short data_reg; /* from definition below */ + unsigned short *config_regs; /* pointer to definition below */ + unsigned short runtime_reg; /* runtime register */ + spinlock_t lock; /* lock for this GPIO block */ +}; + +struct sch311x_gpio_priv { /* driver private data */ + struct sch311x_gpio_block blocks[6]; +}; + +struct sch311x_gpio_block_def { /* register address definitions */ + unsigned short data_reg; + unsigned short config_regs[8]; + unsigned short base; +}; + +/* Note: some GPIOs are not available, these are marked with 0x00 */ + +static struct sch311x_gpio_block_def sch311x_gpio_blocks[] = { + { + .data_reg = 0x4b, /* GP1 */ + .config_regs = {0x23, 0x24, 0x25, 0x26, 0x27, 0x29, 0x2a, 0x2b}, + .base = 10, + }, + { + .data_reg = 0x4c, /* GP2 */ + .config_regs = {0x00, 0x2c, 0x2d, 0x00, 0x00, 0x00, 0x00, 0x32}, + .base = 20, + }, + { + .data_reg = 0x4d, /* GP3 */ + .config_regs = {0x33, 0x34, 0x35, 0x36, 0x37, 0x00, 0x39, 0x3a}, + .base = 30, + }, + { + .data_reg = 0x4e, /* GP4 */ + .config_regs = {0x3b, 0x00, 0x3d, 0x00, 0x6e, 0x6f, 0x72, 0x73}, + .base = 40, + }, + { + .data_reg = 0x4f, /* GP5 */ + .config_regs = {0x3f, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46}, + .base = 50, + }, + { + .data_reg = 0x50, /* GP6 */ + .config_regs = {0x47, 0x48, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59}, + .base = 60, + }, +}; + +static inline struct sch311x_gpio_block * +to_sch311x_gpio_block(struct gpio_chip *chip) +{ + return container_of(chip, struct sch311x_gpio_block, chip); +} + + +/* + * Super-IO functions + */ + +static inline int sch311x_sio_enter(int sio_config_port) +{ + /* Don't step on other drivers' I/O space by accident. */ + if (!request_muxed_region(sio_config_port, 2, DRV_NAME)) { + pr_err(DRV_NAME "I/O address 0x%04x already in use\n", + sio_config_port); + return -EBUSY; + } + + outb(SIO_CONFIG_KEY_ENTER, sio_config_port); + return 0; +} + +static inline void sch311x_sio_exit(int sio_config_port) +{ + outb(SIO_CONFIG_KEY_EXIT, sio_config_port); + release_region(sio_config_port, 2); +} + +static inline int sch311x_sio_inb(int sio_config_port, int reg) +{ + outb(reg, sio_config_port); + return inb(sio_config_port + 1); +} + +static inline void sch311x_sio_outb(int sio_config_port, int reg, int val) +{ + outb(reg, sio_config_port); + outb(val, sio_config_port + 1); +} + + +/* + * GPIO functions + */ + +static int sch311x_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); + + if (block->config_regs[offset] == 0) /* GPIO is not available */ + return -ENODEV; + + if (!request_region(block->runtime_reg + block->config_regs[offset], + 1, DRV_NAME)) { + dev_err(chip->dev, "Failed to request region 0x%04x.\n", + block->runtime_reg + block->config_regs[offset]); + return -EBUSY; + } + return 0; +} + +static void sch311x_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); + + if (block->config_regs[offset] == 0) /* GPIO is not available */ + return; + + release_region(block->runtime_reg + block->config_regs[offset], 1); +} + +static int sch311x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); + unsigned char data; + + spin_lock(&block->lock); + data = inb(block->runtime_reg + block->data_reg); + spin_unlock(&block->lock); + + return !!(data & BIT(offset)); +} + +static void __sch311x_gpio_set(struct sch311x_gpio_block *block, + unsigned offset, int value) +{ + unsigned char data = inb(block->runtime_reg + block->data_reg); + if (value) + data |= BIT(offset); + else + data &= ~BIT(offset); + outb(data, block->runtime_reg + block->data_reg); +} + +static void sch311x_gpio_set(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); + + spin_lock(&block->lock); + __sch311x_gpio_set(block, offset, value); + spin_unlock(&block->lock); +} + +static int sch311x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); + + spin_lock(&block->lock); + outb(SCH311X_GPIO_CONF_IN, block->runtime_reg + + block->config_regs[offset]); + spin_unlock(&block->lock); + + return 0; +} + +static int sch311x_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct sch311x_gpio_block *block = to_sch311x_gpio_block(chip); + + spin_lock(&block->lock); + + outb(SCH311X_GPIO_CONF_OUT, block->runtime_reg + + block->config_regs[offset]); + + __sch311x_gpio_set(block, offset, value); + + spin_unlock(&block->lock); + return 0; +} + +static int sch311x_gpio_probe(struct platform_device *pdev) +{ + struct sch311x_pdev_data *pdata = pdev->dev.platform_data; + struct sch311x_gpio_priv *priv; + struct sch311x_gpio_block *block; + int err, i; + + /* we can register all GPIO data registers at once */ + if (!request_region(pdata->runtime_reg + GP1, 6, DRV_NAME)) { + dev_err(&pdev->dev, "Failed to request region 0x%04x-0x%04x.\n", + pdata->runtime_reg + GP1, pdata->runtime_reg + GP1 + 5); + return -EBUSY; + } + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { + block = &priv->blocks[i]; + + spin_lock_init(&block->lock); + + block->chip.label = DRV_NAME; + block->chip.owner = THIS_MODULE; + block->chip.request = sch311x_gpio_request; + block->chip.free = sch311x_gpio_free; + block->chip.direction_input = sch311x_gpio_direction_in; + block->chip.direction_output = sch311x_gpio_direction_out; + block->chip.get = sch311x_gpio_get; + block->chip.set = sch311x_gpio_set; + block->chip.ngpio = 8; + block->chip.dev = &pdev->dev; + block->chip.base = sch311x_gpio_blocks[i].base; + block->config_regs = sch311x_gpio_blocks[i].config_regs; + block->data_reg = sch311x_gpio_blocks[i].data_reg; + block->runtime_reg = pdata->runtime_reg; + + err = gpiochip_add(&block->chip); + if (err < 0) { + dev_err(&pdev->dev, + "Could not register gpiochip, %d\n", err); + goto exit_err; + } + dev_info(&pdev->dev, + "SMSC SCH311x GPIO block %d registered.\n", i); + } + + return 0; + +exit_err: + release_region(pdata->runtime_reg + GP1, 6); + /* release already registered chips */ + for (--i; i >= 0; i--) + gpiochip_remove(&priv->blocks[i].chip); + return err; +} + +static int sch311x_gpio_remove(struct platform_device *pdev) +{ + struct sch311x_pdev_data *pdata = pdev->dev.platform_data; + struct sch311x_gpio_priv *priv = platform_get_drvdata(pdev); + int err, i; + + release_region(pdata->runtime_reg + GP1, 6); + + for (i = 0; i < ARRAY_SIZE(priv->blocks); i++) { + err = gpiochip_remove(&priv->blocks[i].chip); + if (err) + return err; + dev_info(&pdev->dev, + "SMSC SCH311x GPIO block %d unregistered.\n", i); + } + return 0; +} + +static struct platform_driver sch311x_gpio_driver = { + .driver.name = DRV_NAME, + .driver.owner = THIS_MODULE, + .probe = sch311x_gpio_probe, + .remove = sch311x_gpio_remove, +}; + + +/* + * Init & exit routines + */ + +static int __init sch311x_detect(int sio_config_port, unsigned short *addr) +{ + int err = 0, reg; + unsigned short base_addr; + unsigned char dev_id; + + err = sch311x_sio_enter(sio_config_port); + if (err) + return err; + + /* Check device ID. We currently know about: + * SCH3112 (0x7c), SCH3114 (0x7d), and SCH3116 (0x7f). */ + reg = sch311x_sio_inb(sio_config_port, 0x20); + if (!(reg == 0x7c || reg == 0x7d || reg == 0x7f)) { + err = -ENODEV; + goto exit; + } + dev_id = reg == 0x7c ? 2 : reg == 0x7d ? 4 : 6; + + /* Select logical device A (runtime registers) */ + sch311x_sio_outb(sio_config_port, 0x07, 0x0a); + + /* Check if Logical Device Register is currently active */ + if ((sch311x_sio_inb(sio_config_port, 0x30) & 0x01) == 0) + pr_info("Seems that LDN 0x0a is not active...\n"); + + /* Get the base address of the runtime registers */ + base_addr = (sch311x_sio_inb(sio_config_port, 0x60) << 8) | + sch311x_sio_inb(sio_config_port, 0x61); + if (!base_addr) { + pr_err("Base address not set\n"); + err = -ENODEV; + goto exit; + } + *addr = base_addr; + + pr_info("Found an SMSC SCH311%d chip at 0x%04x\n", dev_id, base_addr); + +exit: + sch311x_sio_exit(sio_config_port); + return err; +} + +static int __init sch311x_gpio_pdev_add(const unsigned short addr) +{ + struct sch311x_pdev_data pdata; + int err; + + pdata.runtime_reg = addr; + + sch311x_gpio_pdev = platform_device_alloc(DRV_NAME, -1); + if (!sch311x_gpio_pdev) + return -ENOMEM; + + err = platform_device_add_data(sch311x_gpio_pdev, + &pdata, sizeof(pdata)); + if (err) { + pr_err(DRV_NAME "Platform data allocation failed\n"); + goto err; + } + + err = platform_device_add(sch311x_gpio_pdev); + if (err) { + pr_err(DRV_NAME "Device addition failed\n"); + goto err; + } + return 0; + +err: + platform_device_put(sch311x_gpio_pdev); + return err; +} + +static int __init sch311x_gpio_init(void) +{ + int err, i; + unsigned short addr = 0; + + for (i = 0; i < ARRAY_SIZE(sch311x_ioports); i++) + if (sch311x_detect(sch311x_ioports[i], &addr) == 0) + break; + + if (!addr) + return -ENODEV; + + err = platform_driver_register(&sch311x_gpio_driver); + if (err) + return err; + + err = sch311x_gpio_pdev_add(addr); + if (err) + goto unreg_platform_driver; + + return 0; + +unreg_platform_driver: + platform_driver_unregister(&sch311x_gpio_driver); + return err; +} + +static void __exit sch311x_gpio_exit(void) +{ + platform_device_unregister(sch311x_gpio_pdev); + platform_driver_unregister(&sch311x_gpio_driver); +} + +module_init(sch311x_gpio_init); +module_exit(sch311x_gpio_exit); + +MODULE_AUTHOR("Bruno Randolf <br1@einfach.org>"); +MODULE_DESCRIPTION("SMSC SCH311x GPIO Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:gpio-sch311x"); |