[DCCP]: Integrate state transitions for passive-close

This adds the necessary state transitions for the two forms of passive-close

 * PASSIVE_CLOSE    - which is entered when a host   receives a Close;
 * PASSIVE_CLOSEREQ - which is entered when a client receives a CloseReq.

Here is a detailed account of what the patch does in each state.

1) Receiving CloseReq

  The pseudo-code in 8.5 says:

     Step 13: Process CloseReq
          If P.type == CloseReq and S.state < CLOSEREQ,
              Generate Close
              S.state := CLOSING
              Set CLOSING timer.

  This means we need to address what to do in CLOSED, LISTEN, REQUEST, RESPOND, PARTOPEN, and OPEN.

   * CLOSED:         silently ignore - it may be a late or duplicate CloseReq;
   * LISTEN/RESPOND: will not appear, since Step 7 is performed first (we know we are the client);
   * REQUEST:        perform Step 13 directly (no need to enqueue packet);
   * OPEN/PARTOPEN:  enter PASSIVE_CLOSEREQ so that the application has a chance to process unread data.

  When already in PASSIVE_CLOSEREQ, no second CloseReq is enqueued. In any other state, the CloseReq is ignored.
  I think that this offers some robustness against rare and pathological cases: e.g. a simultaneous close where
  the client sends a Close and the server a CloseReq. The client will then be retransmitting its Close until it
  gets the Reset, so ignoring the CloseReq while in state CLOSING is sane.

2) Receiving Close

  The code below from 8.5 is unconditional.

     Step 14: Process Close
          If P.type == Close,
              Generate Reset(Closed)
              Tear down connection
              Drop packet and return

  Thus we need to consider all states:
   * CLOSED:           silently ignore, since this can happen when a retransmitted or late Close arrives;
   * LISTEN:           dccp_rcv_state_process() will generate a Reset ("No Connection");
   * REQUEST:          perform Step 14 directly (no need to enqueue packet);
   * RESPOND:          dccp_check_req() will generate a Reset ("Packet Error") -- left it at that;
   * OPEN/PARTOPEN:    enter PASSIVE_CLOSE so that application has a chance to process unread data;
   * CLOSEREQ:         server performed active-close -- perform Step 14;
   * CLOSING:          simultaneous-close: use a tie-breaker to avoid message ping-pong (see comment);
   * PASSIVE_CLOSEREQ: ignore - the peer has a bug (sending first a CloseReq and now a Close);
   * TIMEWAIT:         packet is ignored.

   Note that the condition of receiving a packet in state CLOSED here is different from the condition "there
   is no socket for such a connection": the socket still exists, but its state indicates it is unusable.

   Last, dccp_finish_passive_close sets either DCCP_CLOSED or DCCP_CLOSING = TCP_CLOSING, so that
   sk_stream_wait_close() will wait for the final Reset (which will trigger CLOSING => CLOSED).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 73 insertions, 15 deletions

diff --git a/net/dccp/input.c b/net/dccp/input.c
index ef299fbd7c2..fe4b0fbfa50 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -32,16 +32,56 @@ static void dccp_fin(struct sock *sk, struct sk_buff *skb)
 	sk->sk_data_ready(sk, 0);
 }
 
-static void dccp_rcv_close(struct sock *sk, struct sk_buff *skb)
+static int dccp_rcv_close(struct sock *sk, struct sk_buff *skb)
 {
-	dccp_send_reset(sk, DCCP_RESET_CODE_CLOSED);
-	dccp_fin(sk, skb);
-	dccp_set_state(sk, DCCP_CLOSED);
-	sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_HUP);
+	int queued = 0;
+
+	switch (sk->sk_state) {
+	/*
+	 * We ignore Close when received in one of the following states:
+	 *  - CLOSED		(may be a late or duplicate packet)
+	 *  - PASSIVE_CLOSEREQ	(the peer has sent a CloseReq earlier)
+	 *  - RESPOND		(already handled by dccp_check_req)
+	 */
+	case DCCP_CLOSING:
+		/*
+		 * Simultaneous-close: receiving a Close after sending one. This
+		 * can happen if both client and server perform active-close and
+		 * will result in an endless ping-pong of crossing and retrans-
+		 * mitted Close packets, which only terminates when one of the
+		 * nodes times out (min. 64 seconds). Quicker convergence can be
+		 * achieved when one of the nodes acts as tie-breaker.
+		 * This is ok as both ends are done with data transfer and each
+		 * end is just waiting for the other to acknowledge termination.
+		 */
+		if (dccp_sk(sk)->dccps_role != DCCP_ROLE_CLIENT)
+			break;
+		/* fall through */
+	case DCCP_REQUESTING:
+	case DCCP_ACTIVE_CLOSEREQ:
+		dccp_send_reset(sk, DCCP_RESET_CODE_CLOSED);
+		dccp_done(sk);
+		break;
+	case DCCP_OPEN:
+	case DCCP_PARTOPEN:
+		/* Give waiting application a chance to read pending data */
+		queued = 1;
+		dccp_fin(sk, skb);
+		dccp_set_state(sk, DCCP_PASSIVE_CLOSE);
+		/* fall through */
+	case DCCP_PASSIVE_CLOSE:
+		/*
+		 * Retransmitted Close: we have already enqueued the first one.
+		 */
+		sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_HUP);
+	}
+	return queued;
 }
 
-static void dccp_rcv_closereq(struct sock *sk, struct sk_buff *skb)
+static int dccp_rcv_closereq(struct sock *sk, struct sk_buff *skb)
 {
+	int queued = 0;
+
 	/*
 	 *   Step 7: Check for unexpected packet types
 	 *      If (S.is_server and P.type == CloseReq)
@@ -50,12 +90,26 @@ static void dccp_rcv_closereq(struct sock *sk, struct sk_buff *skb)
 	 */
 	if (dccp_sk(sk)->dccps_role != DCCP_ROLE_CLIENT) {
 		dccp_send_sync(sk, DCCP_SKB_CB(skb)->dccpd_seq, DCCP_PKT_SYNC);
-		return;
+		return queued;
 	}
 
-	if (sk->sk_state != DCCP_CLOSING)
+	/* Step 13: process relevant Client states < CLOSEREQ */
+	switch (sk->sk_state) {
+	case DCCP_REQUESTING:
+		dccp_send_close(sk, 0);
 		dccp_set_state(sk, DCCP_CLOSING);
-	dccp_send_close(sk, 0);
+		break;
+	case DCCP_OPEN:
+	case DCCP_PARTOPEN:
+		/* Give waiting application a chance to read pending data */
+		queued = 1;
+		dccp_fin(sk, skb);
+		dccp_set_state(sk, DCCP_PASSIVE_CLOSEREQ);
+		/* fall through */
+	case DCCP_PASSIVE_CLOSEREQ:
+		sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_HUP);
+	}
+	return queued;
 }
 
 static u8 dccp_reset_code_convert(const u8 code)
@@ -247,11 +301,13 @@ static int __dccp_rcv_established(struct sock *sk, struct sk_buff *skb,
 		dccp_rcv_reset(sk, skb);
 		return 0;
 	case DCCP_PKT_CLOSEREQ:
-		dccp_rcv_closereq(sk, skb);
+		if (dccp_rcv_closereq(sk, skb))
+			return 0;
 		goto discard;
 	case DCCP_PKT_CLOSE:
-		dccp_rcv_close(sk, skb);
-		return 0;
+		if (dccp_rcv_close(sk, skb))
+			return 0;
+		goto discard;
 	case DCCP_PKT_REQUEST:
 		/* Step 7
 		 *   or (S.is_server and P.type == Response)
@@ -590,11 +646,13 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb,
 		dccp_send_sync(sk, dcb->dccpd_seq, DCCP_PKT_SYNC);
 		goto discard;
 	} else if (dh->dccph_type == DCCP_PKT_CLOSEREQ) {
-		dccp_rcv_closereq(sk, skb);
+		if (dccp_rcv_closereq(sk, skb))
+			return 0;
 		goto discard;
 	} else if (dh->dccph_type == DCCP_PKT_CLOSE) {
-		dccp_rcv_close(sk, skb);
-		return 0;
+		if (dccp_rcv_close(sk, skb))
+			return 0;
+		goto discard;
 	}
 
 	switch (sk->sk_state) {