Merge tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core changes from Greg Kroah-Hartman:
 "Here's the big driver core pull request for 3.6-rc1.

  Unlike 3.5, this kernel should be a lot tamer, with the printk changes
  now settled down.  All we have here is some extcon driver updates, w1
  driver updates, a few printk cleanups that weren't needed for 3.5, but
  are good to have now, and some other minor fixes/changes in the driver
  core.

  All of these have been in the linux-next releases for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits)
  printk: Export struct log size and member offsets through vmcoreinfo
  Drivers: hv: Change the hex constant to a decimal constant
  driver core: don't trigger uevent after failure
  extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device
  sysfs: fail dentry revalidation after namespace change fix
  sysfs: fail dentry revalidation after namespace change
  extcon: spelling of detach in function doc
  extcon: arizona: Stop microphone detection if we give up on it
  extcon: arizona: Update cable reporting calls and split headset
  PM / Runtime: Do not increment device usage counts before probing
  kmsg - do not flush partial lines when the console is busy
  kmsg - export "continuation record" flag to /dev/kmsg
  kmsg - avoid warning for CONFIG_PRINTK=n compilations
  kmsg - properly print over-long continuation lines
  driver-core: Use kobj_to_dev instead of re-implementing it
  driver-core: Move kobj_to_dev from genhd.h to device.h
  driver core: Move deferred devices to the end of dpm_list before probing
  driver core: move uevent call to driver_register
  driver core: fix shutdown races with probe/remove(v3)
  Extcon: Arizona: Add driver for Wolfson Arizona class devices
  ...

36 files changed, 1927 insertions, 171 deletions

diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 2bcef657a60..181ed2660b3 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -743,7 +743,6 @@ int bus_add_driver(struct device_driver *drv)
 		}
 	}
 
-	kobject_uevent(&priv->kobj, KOBJ_ADD);
 	return 0;
 
 out_unregister:
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 346be8b78b2..f338037a4f3 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -85,14 +85,13 @@ const char *dev_driver_string(const struct device *dev)
 }
 EXPORT_SYMBOL(dev_driver_string);
 
-#define to_dev(obj) container_of(obj, struct device, kobj)
 #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
 
 static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
 			     char *buf)
 {
 	struct device_attribute *dev_attr = to_dev_attr(attr);
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	ssize_t ret = -EIO;
 
 	if (dev_attr->show)
@@ -108,7 +107,7 @@ static ssize_t dev_attr_store(struct kobject *kobj, struct attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct device_attribute *dev_attr = to_dev_attr(attr);
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	ssize_t ret = -EIO;
 
 	if (dev_attr->store)
@@ -182,7 +181,7 @@ EXPORT_SYMBOL_GPL(device_show_int);
  */
 static void device_release(struct kobject *kobj)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct device_private *p = dev->p;
 
 	if (dev->release)
@@ -200,7 +199,7 @@ static void device_release(struct kobject *kobj)
 
 static const void *device_namespace(struct kobject *kobj)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	const void *ns = NULL;
 
 	if (dev->class && dev->class->ns_type)
@@ -221,7 +220,7 @@ static int dev_uevent_filter(struct kset *kset, struct kobject *kobj)
 	struct kobj_type *ktype = get_ktype(kobj);
 
 	if (ktype == &device_ktype) {
-		struct device *dev = to_dev(kobj);
+		struct device *dev = kobj_to_dev(kobj);
 		if (dev->bus)
 			return 1;
 		if (dev->class)
@@ -232,7 +231,7 @@ static int dev_uevent_filter(struct kset *kset, struct kobject *kobj)
 
 static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 
 	if (dev->bus)
 		return dev->bus->name;
@@ -244,7 +243,7 @@ static const char *dev_uevent_name(struct kset *kset, struct kobject *kobj)
 static int dev_uevent(struct kset *kset, struct kobject *kobj,
 		      struct kobj_uevent_env *env)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	int retval = 0;
 
 	/* add device node properties if present */
@@ -1132,7 +1131,7 @@ int device_register(struct device *dev)
  */
 struct device *get_device(struct device *dev)
 {
-	return dev ? to_dev(kobject_get(&dev->kobj)) : NULL;
+	return dev ? kobj_to_dev(kobject_get(&dev->kobj)) : NULL;
 }
 
 /**
@@ -1754,25 +1753,25 @@ int device_move(struct device *dev, struct device *new_parent,
 		set_dev_node(dev, dev_to_node(new_parent));
 	}
 
-	if (!dev->class)
-		goto out_put;
-	error = device_move_class_links(dev, old_parent, new_parent);
-	if (error) {
-		/* We ignore errors on cleanup since we're hosed anyway... */
-		device_move_class_links(dev, new_parent, old_parent);
-		if (!kobject_move(&dev->kobj, &old_parent->kobj)) {
-			if (new_parent)
-				klist_remove(&dev->p->knode_parent);
-			dev->parent = old_parent;
-			if (old_parent) {
-				klist_add_tail(&dev->p->knode_parent,
-					       &old_parent->p->klist_children);
-				set_dev_node(dev, dev_to_node(old_parent));
+	if (dev->class) {
+		error = device_move_class_links(dev, old_parent, new_parent);
+		if (error) {
+			/* We ignore errors on cleanup since we're hosed anyway... */
+			device_move_class_links(dev, new_parent, old_parent);
+			if (!kobject_move(&dev->kobj, &old_parent->kobj)) {
+				if (new_parent)
+					klist_remove(&dev->p->knode_parent);
+				dev->parent = old_parent;
+				if (old_parent) {
+					klist_add_tail(&dev->p->knode_parent,
+						       &old_parent->p->klist_children);
+					set_dev_node(dev, dev_to_node(old_parent));
+				}
 			}
+			cleanup_glue_dir(dev, new_parent_kobj);
+			put_device(new_parent);
+			goto out;
 		}
-		cleanup_glue_dir(dev, new_parent_kobj);
-		put_device(new_parent);
-		goto out;
 	}
 	switch (dpm_order) {
 	case DPM_ORDER_NONE:
@@ -1787,7 +1786,7 @@ int device_move(struct device *dev, struct device *new_parent,
 		device_pm_move_last(dev);
 		break;
 	}
-out_put:
+
 	put_device(old_parent);
 out:
 	device_pm_unlock();
@@ -1812,6 +1811,13 @@ void device_shutdown(void)
 	while (!list_empty(&devices_kset->list)) {
 		dev = list_entry(devices_kset->list.prev, struct device,
 				kobj.entry);
+
+		/*
+		 * hold reference count of device's parent to
+		 * prevent it from being freed because parent's
+		 * lock is to be held
+		 */
+		get_device(dev->parent);
 		get_device(dev);
 		/*
 		 * Make sure the device is off the kset list, in the
@@ -1820,6 +1826,11 @@ void device_shutdown(void)
 		list_del_init(&dev->kobj.entry);
 		spin_unlock(&devices_kset->list_lock);
 
+		/* hold lock to avoid race with probe/release */
+		if (dev->parent)
+			device_lock(dev->parent);
+		device_lock(dev);
+
 		/* Don't allow any more runtime suspends */
 		pm_runtime_get_noresume(dev);
 		pm_runtime_barrier(dev);
@@ -1831,7 +1842,13 @@ void device_shutdown(void)
 			dev_dbg(dev, "shutdown\n");
 			dev->driver->shutdown(dev);
 		}
+
+		device_unlock(dev);
+		if (dev->parent)
+			device_unlock(dev->parent);
+
 		put_device(dev);
+		put_device(dev->parent);
 
 		spin_lock(&devices_kset->list_lock);
 	}
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index dcb8a6e4869..e3bbed8a617 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -85,8 +85,20 @@ static void deferred_probe_work_func(struct work_struct *work)
 		 * manipulate the deferred list
 		 */
 		mutex_unlock(&deferred_probe_mutex);
+
+		/*
+		 * Force the device to the end of the dpm_list since
+		 * the PM code assumes that the order we add things to
+		 * the list is a good order for suspend but deferred
+		 * probe makes that very unsafe.
+		 */
+		device_pm_lock();
+		device_pm_move_last(dev);
+		device_pm_unlock();
+
 		dev_dbg(dev, "Retrying from deferred list\n");
 		bus_probe_device(dev);
+
 		mutex_lock(&deferred_probe_mutex);
 
 		put_device(dev);
@@ -283,6 +295,7 @@ probe_failed:
 	devres_release_all(dev);
 	driver_sysfs_remove(dev);
 	dev->driver = NULL;
+	dev_set_drvdata(dev, NULL);
 
 	if (ret == -EPROBE_DEFER) {
 		/* Driver requested deferred probing */
@@ -356,10 +369,9 @@ int driver_probe_device(struct device_driver *drv, struct device *dev)
 	pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
 		 drv->bus->name, __func__, dev_name(dev), drv->name);
 
-	pm_runtime_get_noresume(dev);
 	pm_runtime_barrier(dev);
 	ret = really_probe(dev, drv);
-	pm_runtime_put_sync(dev);
+	pm_runtime_idle(dev);
 
 	return ret;
 }
@@ -406,9 +418,8 @@ int device_attach(struct device *dev)
 			ret = 0;
 		}
 	} else {
-		pm_runtime_get_noresume(dev);
 		ret = bus_for_each_drv(dev->bus, NULL, dev, __device_attach);
-		pm_runtime_put_sync(dev);
+		pm_runtime_idle(dev);
 	}
 out_unlock:
 	device_unlock(dev);
@@ -487,6 +498,7 @@ static void __device_release_driver(struct device *dev)
 			drv->remove(dev);
 		devres_release_all(dev);
 		dev->driver = NULL;
+		dev_set_drvdata(dev, NULL);
 		klist_remove(&dev->p->knode_driver);
 		if (dev->bus)
 			blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
diff --git a/drivers/base/dma-buf.c b/drivers/base/dma-buf.c
index 24e88fe29ec..c30f3e1d0ef 100644
--- a/drivers/base/dma-buf.c
+++ b/drivers/base/dma-buf.c
@@ -493,6 +493,7 @@ EXPORT_SYMBOL_GPL(dma_buf_vmap);
 /**
  * dma_buf_vunmap - Unmap a vmap obtained by dma_buf_vmap.
  * @dmabuf:	[in]	buffer to vunmap
+ * @vaddr:	[in]	vmap to vunmap
  */
 void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
 {
diff --git a/drivers/base/dma-coherent.c b/drivers/base/dma-coherent.c
index 1b85949e3d2..560a7173f81 100644
--- a/drivers/base/dma-coherent.c
+++ b/drivers/base/dma-coherent.c
@@ -186,6 +186,7 @@ EXPORT_SYMBOL(dma_release_from_coherent);
  * @vma:	vm_area for the userspace memory
  * @vaddr:	cpu address returned by dma_alloc_from_coherent
  * @size:	size of the memory buffer allocated by dma_alloc_from_coherent
+ * @ret:	result from remap_pfn_range()
  *
  * This checks whether the memory was allocated from the per-device
  * coherent memory pool and if so, maps that memory to the provided vma.
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 207c27ddf82..974e301a1ef 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -185,8 +185,12 @@ int driver_register(struct device_driver *drv)
 	if (ret)
 		return ret;
 	ret = driver_add_groups(drv, drv->groups);
-	if (ret)
+	if (ret) {
 		bus_remove_driver(drv);
+		return ret;
+	}
+	kobject_uevent(&drv->p->kobj, KOBJ_ADD);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(driver_register);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 5401814c874..803cfc1597a 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -22,8 +22,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 
-#define to_dev(obj) container_of(obj, struct device, kobj)
-
 MODULE_AUTHOR("Manuel Estrada Sainz");
 MODULE_DESCRIPTION("Multi purpose firmware loading support");
 MODULE_LICENSE("GPL");
@@ -290,7 +288,7 @@ static ssize_t firmware_data_read(struct file *filp, struct kobject *kobj,
 				  struct bin_attribute *bin_attr,
 				  char *buffer, loff_t offset, size_t count)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	struct firmware *fw;
 	ssize_t ret_count;
@@ -384,7 +382,7 @@ static ssize_t firmware_data_write(struct file *filp, struct kobject *kobj,
 				   struct bin_attribute *bin_attr,
 				   char *buffer, loff_t offset, size_t count)
 {
-	struct device *dev = to_dev(kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct firmware_priv *fw_priv = to_firmware_priv(dev);
 	struct firmware *fw;
 	ssize_t retval;
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 29c5cf852ef..16716356d1f 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -21,6 +21,16 @@ config EXTCON_GPIO
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
+config EXTCON_MAX77693
+	tristate "MAX77693 EXTCON Support"
+	depends on MFD_MAX77693
+	select IRQ_DOMAIN
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the MUIC device of
+	  Maxim MAX77693 PMIC. The MAX77693 MUIC is a USB port accessory
+	  detector and switch.
+
 config EXTCON_MAX8997
 	tristate "MAX8997 EXTCON Support"
 	depends on MFD_MAX8997
@@ -29,4 +39,12 @@ config EXTCON_MAX8997
 	  Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory
 	  detector and switch.
 
+config EXTCON_ARIZONA
+	tristate "Wolfson Arizona EXTCON support"
+	depends on MFD_ARIZONA
+	help
+	  Say Y here to enable support for external accessory detection
+	  with Wolfson Arizona devices. These are audio CODECs with
+	  advanced audio accessory detection support.
+
 endif # MULTISTATE_SWITCH
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 86020bdb6da..88961b33234 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -4,4 +4,6 @@
 
 obj-$(CONFIG_EXTCON)		+= extcon_class.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon_gpio.o
+obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o
 obj-$(CONFIG_EXTCON_MAX8997)	+= extcon-max8997.o
+obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
new file mode 100644
index 00000000000..427a289f32a
--- /dev/null
+++ b/drivers/extcon/extcon-arizona.c
@@ -0,0 +1,490 @@
+/*
+ * extcon-arizona.c - Extcon driver Wolfson Arizona devices
+ *
+ *  Copyright (C) 2012 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/extcon.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_extcon_info {
+	struct device *dev;
+	struct arizona *arizona;
+	struct mutex lock;
+	struct regulator *micvdd;
+
+	int micd_mode;
+	const struct arizona_micd_config *micd_modes;
+	int micd_num_modes;
+
+	bool micd_reva;
+
+	bool mic;
+	bool detecting;
+	int jack_flips;
+
+	struct extcon_dev edev;
+};
+
+static const struct arizona_micd_config micd_default_modes[] = {
+	{ ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
+	{ 0,                  2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
+};
+
+#define ARIZONA_CABLE_MECHANICAL 0
+#define ARIZONA_CABLE_MICROPHONE 1
+#define ARIZONA_CABLE_HEADPHONE  2
+
+static const char *arizona_cable[] = {
+	"Mechanical",
+	"Microphone",
+	"Headphone",
+	NULL,
+};
+
+static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
+{
+	struct arizona *arizona = info->arizona;
+
+	gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio,
+				info->micd_modes[mode].gpio);
+	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+			   ARIZONA_MICD_BIAS_SRC_MASK,
+			   info->micd_modes[mode].bias);
+	regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+			   ARIZONA_ACCDET_SRC, info->micd_modes[mode].src);
+
+	info->micd_mode = mode;
+
+	dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode);
+}
+
+static void arizona_start_mic(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	bool change;
+	int ret;
+
+	info->detecting = true;
+	info->mic = false;
+	info->jack_flips = 0;
+
+	/* Microphone detection can't use idle mode */
+	pm_runtime_get(info->dev);
+
+	ret = regulator_enable(info->micvdd);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to enable MICVDD: %d\n",
+			ret);
+	}
+
+	if (info->micd_reva) {
+		regmap_write(arizona->regmap, 0x80, 0x3);
+		regmap_write(arizona->regmap, 0x294, 0);
+		regmap_write(arizona->regmap, 0x80, 0x0);
+	}
+
+	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				 ARIZONA_MICD_ENA, ARIZONA_MICD_ENA,
+				 &change);
+	if (!change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_put_autosuspend(info->dev);
+	}
+}
+
+static void arizona_stop_mic(struct arizona_extcon_info *info)
+{
+	struct arizona *arizona = info->arizona;
+	bool change;
+
+	regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+				 ARIZONA_MICD_ENA, 0,
+				 &change);
+
+	if (info->micd_reva) {
+		regmap_write(arizona->regmap, 0x80, 0x3);
+		regmap_write(arizona->regmap, 0x294, 2);
+		regmap_write(arizona->regmap, 0x80, 0x0);
+	}
+
+	if (change) {
+		regulator_disable(info->micvdd);
+		pm_runtime_put_autosuspend(info->dev);
+	}
+}
+
+static irqreturn_t arizona_micdet(int irq, void *data)
+{
+	struct arizona_extcon_info *info = data;
+	struct arizona *arizona = info->arizona;
+	unsigned int val;
+	int ret;
+
+	mutex_lock(&info->lock);
+
+	ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read MICDET: %d\n", ret);
+		return IRQ_NONE;
+	}
+
+	dev_dbg(arizona->dev, "MICDET: %x\n", val);
+
+	if (!(val & ARIZONA_MICD_VALID)) {
+		dev_warn(arizona->dev, "Microphone detection state invalid\n");
+		mutex_unlock(&info->lock);
+		return IRQ_NONE;
+	}
+
+	/* Due to jack detect this should never happen */
+	if (!(val & ARIZONA_MICD_STS)) {
+		dev_warn(arizona->dev, "Detected open circuit\n");
+		info->detecting = false;
+		goto handled;
+	}
+
+	/* If we got a high impedence we should have a headset, report it. */
+	if (info->detecting && (val & 0x400)) {
+		ret = extcon_update_state(&info->edev,
+					  1 << ARIZONA_CABLE_MICROPHONE |
+					  1 << ARIZONA_CABLE_HEADPHONE,
+					  1 << ARIZONA_CABLE_MICROPHONE |
+					  1 << ARIZONA_CABLE_HEADPHONE);
+
+		if (ret != 0)
+			dev_err(arizona->dev, "Headset report failed: %d\n",
+				ret);
+
+		info->mic = true;
+		info->detecting = false;
+		goto handled;
+	}
+
+	/* If we detected a lower impedence during initial startup
+	 * then we probably have the wrong polarity, flip it.  Don't
+	 * do this for the lowest impedences to speed up detection of
+	 * plain headphones.  If both polarities report a low
+	 * impedence then give up and report headphones.
+	 */
+	if (info->detecting && (val & 0x3f8)) {
+		info->jack_flips++;
+
+		if (info->jack_flips >= info->micd_num_modes) {
+			dev_dbg(arizona->dev, "Detected headphone\n");
+			info->detecting = false;
+			arizona_stop_mic(info);
+
+			ret = extcon_set_cable_state_(&info->edev,
+						      ARIZONA_CABLE_HEADPHONE,
+						      true);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Headphone report failed: %d\n",
+				ret);
+		} else {
+			info->micd_mode++;
+			if (info->micd_mode == info->micd_num_modes)
+				info->micd_mode = 0;
+			arizona_extcon_set_mode(info, info->micd_mode);
+
+			info->jack_flips++;
+		}
+
+		goto handled;
+	}
+
+	/*
+	 * If we're still detecting and we detect a short then we've
+	 * got a headphone.  Otherwise it's a button press, the
+	 * button reporting is stubbed out for now.
+	 */
+	if (val & 0x3fc) {
+		if (info->mic) {
+			dev_dbg(arizona->dev, "Mic button detected\n");
+
+		} else if (info->detecting) {
+			dev_dbg(arizona->dev, "Headphone detected\n");
+			info->detecting = false;
+			arizona_stop_mic(info);
+
+			ret = extcon_set_cable_state_(&info->edev,
+						      ARIZONA_CABLE_HEADPHONE,
+						      true);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Headphone report failed: %d\n",
+				ret);
+		} else {
+			dev_warn(arizona->dev, "Button with no mic: %x\n",
+				 val);
+		}
+	} else {
+		dev_dbg(arizona->dev, "Mic button released\n");
+	}
+
+handled:
+	pm_runtime_mark_last_busy(info->dev);
+	mutex_unlock(&info->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t arizona_jackdet(int irq, void *data)
+{
+	struct arizona_extcon_info *info = data;
+	struct arizona *arizona = info->arizona;
+	unsigned int val;
+	int ret;
+
+	pm_runtime_get_sync(info->dev);
+
+	mutex_lock(&info->lock);
+
+	ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val);
+	if (ret != 0) {
+		dev_err(arizona->dev, "Failed to read jackdet status: %d\n",
+			ret);
+		mutex_unlock(&info->lock);
+		pm_runtime_put_autosuspend(info->dev);
+		return IRQ_NONE;
+	}
+
+	if (val & ARIZONA_JD1_STS) {
+		dev_dbg(arizona->dev, "Detected jack\n");
+		ret = extcon_set_cable_state_(&info->edev,
+					      ARIZONA_CABLE_MECHANICAL, true);
+
+		if (ret != 0)
+			dev_err(arizona->dev, "Mechanical report failed: %d\n",
+				ret);
+
+		arizona_start_mic(info);
+	} else {
+		dev_dbg(arizona->dev, "Detected jack removal\n");
+
+		arizona_stop_mic(info);
+
+		ret = extcon_update_state(&info->edev, 0xffffffff, 0);
+		if (ret != 0)
+			dev_err(arizona->dev, "Removal report failed: %d\n",
+				ret);
+	}
+
+	mutex_unlock(&info->lock);
+
+	pm_runtime_mark_last_busy(info->dev);
+	pm_runtime_put_autosuspend(info->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit arizona_extcon_probe(struct platform_device *pdev)
+{
+	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	struct arizona_pdata *pdata;
+	struct arizona_extcon_info *info;
+	int ret, mode;
+
+	pdata = dev_get_platdata(arizona->dev);
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	info->micvdd = devm_regulator_get(arizona->dev, "MICVDD");
+	if (IS_ERR(info->micvdd)) {
+		ret = PTR_ERR(info->micvdd);
+		dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret);
+		goto err;
+	}
+
+	mutex_init(&info->lock);
+	info->arizona = arizona;
+	info->dev = &pdev->dev;
+	info->detecting = true;
+	platform_set_drvdata(pdev, info);
+
+	switch (arizona->type) {
+	case WM5102:
+		switch (arizona->rev) {
+		case 0:
+			info->micd_reva = true;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	info->edev.name = "Headset Jack";
+	info->edev.supported_cable = arizona_cable;
+
+	ret = extcon_dev_register(&info->edev, arizona->dev);
+	if (ret < 0) {
+		dev_err(arizona->dev, "extcon_dev_regster() failed: %d\n",
+			ret);
+		goto err;
+	}
+
+	if (pdata->num_micd_configs) {
+		info->micd_modes = pdata->micd_configs;
+		info->micd_num_modes = pdata->num_micd_configs;
+	} else {
+		info->micd_modes = micd_default_modes;
+		info->micd_num_modes = ARRAY_SIZE(micd_default_modes);
+	}
+
+	if (arizona->pdata.micd_pol_gpio > 0) {
+		if (info->micd_modes[0].gpio)
+			mode = GPIOF_OUT_INIT_HIGH;
+		else
+			mode = GPIOF_OUT_INIT_LOW;
+
+		ret = devm_gpio_request_one(&pdev->dev,
+					    arizona->pdata.micd_pol_gpio,
+					    mode,
+					    "MICD polarity");
+		if (ret != 0) {
+			dev_err(arizona->dev, "Failed to request GPIO%d: %d\n",
+				arizona->pdata.micd_pol_gpio, ret);
+			goto err_register;
+		}
+	}
+
+	arizona_extcon_set_mode(info, 0);
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_idle(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE,
+				  "JACKDET rise", arizona_jackdet, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n",
+			ret);
+		goto err_register;
+	}
+
+	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n",
+			ret);
+		goto err_rise;
+	}
+
+	ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_FALL,
+				  "JACKDET fall", arizona_jackdet, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret);
+		goto err_rise_wake;
+	}
+
+	ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 1);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n",
+			ret);
+		goto err_fall;
+	}
+
+	ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET,
+				  "MICDET", arizona_micdet, info);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret);
+		goto err_fall_wake;
+	}
+
+	regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1,
+			   ARIZONA_MICD_BIAS_STARTTIME_MASK |
+			   ARIZONA_M