Merge tag 'asoc-v3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.13

Some additional fixes for v3.13, the majority of which are removals and
downgrades of BUG()s from Takashi.

35 files changed, 437 insertions, 445 deletions

diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c
index 51410c2ac2c..4d978a3c88f 100644
--- a/drivers/clk/clk-nomadik.c
+++ b/drivers/clk/clk-nomadik.c
@@ -27,6 +27,14 @@
  */
 
 #define SRC_CR			0x00U
+#define SRC_CR_T0_ENSEL		BIT(15)
+#define SRC_CR_T1_ENSEL		BIT(17)
+#define SRC_CR_T2_ENSEL		BIT(19)
+#define SRC_CR_T3_ENSEL		BIT(21)
+#define SRC_CR_T4_ENSEL		BIT(23)
+#define SRC_CR_T5_ENSEL		BIT(25)
+#define SRC_CR_T6_ENSEL		BIT(27)
+#define SRC_CR_T7_ENSEL		BIT(29)
 #define SRC_XTALCR		0x0CU
 #define SRC_XTALCR_XTALTIMEN	BIT(20)
 #define SRC_XTALCR_SXTALDIS	BIT(19)
@@ -543,6 +551,19 @@ void __init nomadik_clk_init(void)
 		       __func__, np->name);
 		return;
 	}
+
+	/* Set all timers to use the 2.4 MHz TIMCLK */
+	val = readl(src_base + SRC_CR);
+	val |= SRC_CR_T0_ENSEL;
+	val |= SRC_CR_T1_ENSEL;
+	val |= SRC_CR_T2_ENSEL;
+	val |= SRC_CR_T3_ENSEL;
+	val |= SRC_CR_T4_ENSEL;
+	val |= SRC_CR_T5_ENSEL;
+	val |= SRC_CR_T6_ENSEL;
+	val |= SRC_CR_T7_ENSEL;
+	writel(val, src_base + SRC_CR);
+
 	val = readl(src_base + SRC_XTALCR);
 	pr_info("SXTALO is %s\n",
 		(val & SRC_XTALCR_SXTALDIS) ? "disabled" : "enabled");
diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c
index fc777bdc188..81a202d12a7 100644
--- a/drivers/clk/mvebu/armada-370.c
+++ b/drivers/clk/mvebu/armada-370.c
@@ -39,8 +39,8 @@ static const struct coreclk_ratio a370_coreclk_ratios[] __initconst = {
 };
 
 static const u32 a370_tclk_freqs[] __initconst = {
-	16600000,
-	20000000,
+	166000000,
+	200000000,
 };
 
 static u32 __init a370_get_tclk_freq(void __iomem *sar)
diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c
index 5bb848cac6e..81dd31a686d 100644
--- a/drivers/clk/socfpga/clk.c
+++ b/drivers/clk/socfpga/clk.c
@@ -49,7 +49,7 @@
 #define SOCFPGA_L4_SP_CLK		"l4_sp_clk"
 #define SOCFPGA_NAND_CLK		"nand_clk"
 #define SOCFPGA_NAND_X_CLK		"nand_x_clk"
-#define SOCFPGA_MMC_CLK			"mmc_clk"
+#define SOCFPGA_MMC_CLK			"sdmmc_clk"
 #define SOCFPGA_DB_CLK			"gpio_db_clk"
 
 #define div_mask(width)	((1 << (width)) - 1)
diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c
index 67ccf4aa727..f5e4c21b301 100644
--- a/drivers/clk/versatile/clk-icst.c
+++ b/drivers/clk/versatile/clk-icst.c
@@ -107,7 +107,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	vco = icst_hz_to_vco(icst->params, rate);
 	icst->rate = icst_hz(icst->params, vco);
-	vco_set(icst->vcoreg, icst->lockreg, vco);
+	vco_set(icst->lockreg, icst->vcoreg, vco);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 05ad9ba0a67..fe58d0833a1 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -61,7 +61,7 @@ static int drm_version(struct drm_device *dev, void *data,
 
 /** Ioctl table */
 static const struct drm_ioctl_desc drm_ioctls[] = {
-	DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED),
+	DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version, DRM_UNLOCKED|DRM_RENDER_ALLOW),
 	DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, 0),
 	DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, 0),
 	DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY),
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index ea9022ef15d..10d1de5bce6 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -83,8 +83,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	return true;
 }
 
-static void intel_crt_get_config(struct intel_encoder *encoder,
-				 struct intel_crtc_config *pipe_config)
+static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crt *crt = intel_encoder_to_crt(encoder);
@@ -102,7 +101,25 @@ static void intel_crt_get_config(struct intel_encoder *encoder,
 	else
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
-	pipe_config->adjusted_mode.flags |= flags;
+	return flags;
+}
+
+static void intel_crt_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config)
+{
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
+}
+
+static void hsw_crt_get_config(struct intel_encoder *encoder,
+			       struct intel_crtc_config *pipe_config)
+{
+	intel_ddi_get_config(encoder, pipe_config);
+
+	pipe_config->adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
+					      DRM_MODE_FLAG_NHSYNC |
+					      DRM_MODE_FLAG_PVSYNC |
+					      DRM_MODE_FLAG_NVSYNC);
+	pipe_config->adjusted_mode.flags |= intel_crt_get_flags(encoder);
 }
 
 /* Note: The caller is required to filter out dpms modes not supported by the
@@ -799,7 +816,10 @@ void intel_crt_init(struct drm_device *dev)
 	crt->base.mode_set = intel_crt_mode_set;
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
-	crt->base.get_config = intel_crt_get_config;
+	if (IS_HASWELL(dev))
+		crt->base.get_config = hsw_crt_get_config;
+	else
+		crt->base.get_config = intel_crt_get_config;
 	if (I915_HAS_HOTPLUG(dev))
 		crt->base.hpd_pin = HPD_CRT;
 	if (HAS_DDI(dev))
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 63de2701b97..b53fff84a7d 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1249,8 +1249,8 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
 		intel_dp_check_link_status(intel_dp);
 }
 
-static void intel_ddi_get_config(struct intel_encoder *encoder,
-				 struct intel_crtc_config *pipe_config)
+void intel_ddi_get_config(struct intel_encoder *encoder,
+			  struct intel_crtc_config *pipe_config)
 {
 	struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
@@ -1268,6 +1268,23 @@ static void intel_ddi_get_config(struct intel_encoder *encoder,
 		flags |= DRM_MODE_FLAG_NVSYNC;
 
 	pipe_config->adjusted_mode.flags |= flags;
+
+	switch (temp & TRANS_DDI_BPC_MASK) {
+	case TRANS_DDI_BPC_6:
+		pipe_config->pipe_bpp = 18;
+		break;
+	case TRANS_DDI_BPC_8:
+		pipe_config->pipe_bpp = 24;
+		break;
+	case TRANS_DDI_BPC_10:
+		pipe_config->pipe_bpp = 30;
+		break;
+	case TRANS_DDI_BPC_12:
+		pipe_config->pipe_bpp = 36;
+		break;
+	default:
+		break;
+	}
 }
 
 static void intel_ddi_destroy(struct drm_encoder *encoder)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 581fb4b2f76..d78d33f9337 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2327,9 +2327,10 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc)
 			   FDI_FE_ERRC_ENABLE);
 }
 
-static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc)
+static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
 {
-	return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder;
+	return crtc->base.enabled && crtc->active &&
+		crtc->config.has_pch_encoder;
 }
 
 static void ivb_modeset_global_resources(struct drm_device *dev)
@@ -2979,6 +2980,48 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
 		   I915_READ(VSYNCSHIFT(cpu_transcoder)));
 }
 
+static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t temp;
+
+	temp = I915_READ(SOUTH_CHICKEN1);
+	if (temp & FDI_BC_BIFURCATION_SELECT)
+		return;
+
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+	temp |= FDI_BC_BIFURCATION_SELECT;
+	DRM_DEBUG_KMS("enabling fdi C rx\n");
+	I915_WRITE(SOUTH_CHICKEN1, temp);
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+
+static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
+{
+	struct drm_device *dev = intel_crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	switch (intel_crtc->pipe) {
+	case PIPE_A:
+		break;
+	case PIPE_B:
+		if (intel_crtc->config.fdi_lanes > 2)
+			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
+		else
+			cpt_enable_fdi_bc_bifurcation(dev);
+
+		break;
+	case PIPE_C:
+		cpt_enable_fdi_bc_bifurcation(dev);
+
+		break;
+	default:
+		BUG();
+	}
+}
+
 /*
  * Enable PCH resources required for PCH ports:
  *   - PCH PLLs
@@ -2997,6 +3040,9 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 
 	assert_pch_transcoder_disabled(dev_priv, pipe);
 
+	if (IS_IVYBRIDGE(dev))
+		ivybridge_update_fdi_bc_bifurcation(intel_crtc);
+
 	/* Write the TU size bits before fdi link training, so that error
 	 * detection works. */
 	I915_WRITE(FDI_RX_TUSIZE1(pipe),
@@ -4983,6 +5029,22 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
+	if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) {
+		switch (tmp & PIPECONF_BPC_MASK) {
+		case PIPECONF_6BPC:
+			pipe_config->pipe_bpp = 18;
+			break;
+		case PIPECONF_8BPC:
+			pipe_config->pipe_bpp = 24;
+			break;
+		case PIPECONF_10BPC:
+			pipe_config->pipe_bpp = 30;
+			break;
+		default:
+			break;
+		}
+	}
+
 	intel_get_pipe_timings(crtc, pipe_config);
 
 	i9xx_get_pfit_config(crtc, pipe_config);
@@ -5576,48 +5638,6 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 	return true;
 }
 
-static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t temp;
-
-	temp = I915_READ(SOUTH_CHICKEN1);
-	if (temp & FDI_BC_BIFURCATION_SELECT)
-		return;
-
-	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
-	WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
-	temp |= FDI_BC_BIFURCATION_SELECT;
-	DRM_DEBUG_KMS("enabling fdi C rx\n");
-	I915_WRITE(SOUTH_CHICKEN1, temp);
-	POSTING_READ(SOUTH_CHICKEN1);
-}
-
-static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	switch (intel_crtc->pipe) {
-	case PIPE_A:
-		break;
-	case PIPE_B:
-		if (intel_crtc->config.fdi_lanes > 2)
-			WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
-		else
-			cpt_enable_fdi_bc_bifurcation(dev);
-
-		break;
-	case PIPE_C:
-		cpt_enable_fdi_bc_bifurcation(dev);
-
-		break;
-	default:
-		BUG();
-	}
-}
-
 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
 {
 	/*
@@ -5811,9 +5831,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 					     &intel_crtc->config.fdi_m_n);
 	}
 
-	if (IS_IVYBRIDGE(dev))
-		ivybridge_update_fdi_bc_bifurcation(intel_crtc);
-
 	ironlake_set_pipeconf(crtc);
 
 	/* Set up the display plane register */
@@ -5881,6 +5898,23 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 	if (!(tmp & PIPECONF_ENABLE))
 		return false;
 
+	switch (tmp & PIPECONF_BPC_MASK) {
+	case PIPECONF_6BPC:
+		pipe_config->pipe_bpp = 18;
+		break;
+	case PIPECONF_8BPC:
+		pipe_config->pipe_bpp = 24;
+		break;
+	case PIPECONF_10BPC:
+		pipe_config->pipe_bpp = 30;
+		break;
+	case PIPECONF_12BPC:
+		pipe_config->pipe_bpp = 36;
+		break;
+	default:
+		break;
+	}
+
 	if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
 		struct intel_shared_dpll *pll;
 
@@ -8612,6 +8646,9 @@ intel_pipe_config_compare(struct drm_device *dev,
 	PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
 	PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
 
+	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5)
+		PIPE_CONF_CHECK_I(pipe_bpp);
+
 #undef PIPE_CONF_CHECK_X
 #undef PIPE_CONF_CHECK_I
 #undef PIPE_CONF_CHECK_FLAGS
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 2c555f91bfa..1a431377d83 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1401,6 +1401,26 @@ static void intel_dp_get_config(struct intel_encoder *encoder,
 		else
 			pipe_config->port_clock = 270000;
 	}
+
+	if (is_edp(intel_dp) && dev_priv->vbt.edp_bpp &&
+	    pipe_config->pipe_bpp > dev_priv->vbt.edp_bpp) {
+		/*
+		 * This is a big fat ugly hack.
+		 *
+		 * Some machines in UEFI boot mode provide us a VBT that has 18
+		 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons
+		 * unknown we fail to light up. Yet the same BIOS boots up with
+		 * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
+		 * max, not what it tells us to use.
+		 *
+		 * Note: This will still be broken if the eDP panel is not lit
+		 * up by the BIOS, and thus we can't get the mode at module
+		 * load.
+		 */
+		DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
+			      pipe_config->pipe_bpp, dev_priv->vbt.edp_bpp);
+		dev_priv->vbt.edp_bpp = pipe_config->pipe_bpp;
+	}
 }
 
 static bool is_edp_psr(struct intel_dp *intel_dp)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9b7b68fd5d4..7f2b384ac93 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -765,6 +765,8 @@ extern void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder);
 extern bool
 intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
 extern void intel_ddi_fdi_disable(struct drm_crtc *crtc);
+extern void intel_ddi_get_config(struct intel_encoder *encoder,
+				 struct intel_crtc_config *pipe_config);
 
 extern void intel_display_handle_reset(struct drm_device *dev);
 extern bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 831a5c021c4..b8af94a5be3 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -700,6 +700,22 @@ static const struct dmi_system_id intel_no_lvds[] = {
 	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Intel D410PT",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
+			DMI_MATCH(DMI_BOARD_NAME, "D410PT"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Intel D425KT",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "D425KT"),
+		},
+	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Intel D510MO",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index fe1de855775..57fcc4b16a5 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -291,6 +291,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode
 	/* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */
 
 	WREG32(HDMI_ACR_PACKET_CONTROL + offset,
+	       HDMI_ACR_SOURCE | /* select SW CTS value */
 	       HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
 
 	evergreen_hdmi_update_ACR(encoder, mode->clock);
diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c
index 71399065db0..b41905573cd 100644
--- a/drivers/gpu/drm/radeon/kv_dpm.c
+++ b/drivers/gpu/drm/radeon/kv_dpm.c
@@ -2635,7 +2635,7 @@ int kv_dpm_init(struct radeon_device *rdev)
 	pi->caps_sclk_ds = true;
 	pi->enable_auto_thermal_throttling = true;
 	pi->disable_nb_ps3_in_battery = false;
-	pi->bapm_enable = true;
+	pi->bapm_enable = false;
 	pi->voltage_drop_t = 0;
 	pi->caps_sclk_throttle_low_notification = false;
 	pi->caps_fps = false; /* true? */
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index a400ac1c414..24f4960f59e 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1272,8 +1272,8 @@ struct radeon_blacklist_clocks
 struct radeon_clock_and_voltage_limits {
 	u32 sclk;
 	u32 mclk;
-	u32 vddc;
-	u32 vddci;
+	u16 vddc;
+	u16 vddci;
 };
 
 struct radeon_clock_array {
diff --git a/drivers/input/input.c b/drivers/input/input.c
index c0446992892..e75d015024a 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1734,6 +1734,7 @@ EXPORT_SYMBOL_GPL(input_class);
  */
 struct input_dev *input_allocate_device(void)
 {
+	static atomic_t input_no = ATOMIC_INIT(0);
 	struct input_dev *dev;
 
 	dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -1743,9 +1744,13 @@ struct input_dev *input_allocate_device(void)
 		device_initialize(&dev->dev);
 		mutex_init(&dev->mutex);
 		spin_lock_init(&dev->event_lock);
+		init_timer(&dev->timer);
 		INIT_LIST_HEAD(&dev->h_list);
 		INIT_LIST_HEAD(&dev->node);
 
+		dev_set_name(&dev->dev, "input%ld",
+			     (unsigned long) atomic_inc_return(&input_no) - 1);
+
 		__module_get(THIS_MODULE);
 	}
 
@@ -2019,7 +2024,6 @@ static void devm_input_device_unregister(struct device *dev, void *res)
  */
 int input_register_device(struct input_dev *dev)
 {
-	static atomic_t input_no = ATOMIC_INIT(0);
 	struct input_devres *devres = NULL;
 	struct input_handler *handler;
 	unsigned int packet_size;
@@ -2059,7 +2063,6 @@ int input_register_device(struct input_dev *dev)
 	 * If delay and period are pre-set by the driver, then autorepeating
 	 * is handled by the driver itself and we don't do it in input.c.
 	 */
-	init_timer(&dev->timer);
 	if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {
 		dev->timer.data = (long) dev;
 		dev->timer.function = input_repeat_key;
@@ -2073,9 +2076,6 @@ int input_register_device(struct input_dev *dev)
 	if (!dev->setkeycode)
 		dev->setkeycode = input_default_setkeycode;
 
-	dev_set_name(&dev->dev, "input%ld",
-		     (unsigned long) atomic_inc_return(&input_no) - 1);
-
 	error = device_add(&dev->dev);
 	if (error)
 		goto err_free_vals;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 134c3b404a5..a2e758d2758 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -786,10 +786,17 @@ static int pxa27x_keypad_probe(struct platform_device *pdev)
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	if (pdata)
+	if (pdata) {
 		error = pxa27x_keypad_build_keycode(keypad);
-	else
+	} else {
 		error = pxa27x_keypad_build_keycode_from_dt(keypad);
+		/*
+		 * Data that we get from DT resides in dynamically
+		 * allocated memory so we need to update our pdata
+		 * pointer.
+		 */
+		pdata = keypad->pdata;
+	}
 	if (error) {
 		dev_err(&pdev->dev, "failed to build keycode\n");
 		goto failed_put_clk;
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index 082684e7f39..9365535ba7f 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -351,7 +351,9 @@ static void cm109_urb_irq_callback(struct urb *urb)
 	if (status) {
 		if (status == -ESHUTDOWN)
 			return;
-		dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
+		dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+				    __func__, status);
+		goto out;
 	}
 
 	/* Special keys */
@@ -418,8 +420,12 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 	     dev->ctl_data->byte[2],
 	     dev->ctl_data->byte[3]);
 
-	if (status)
-		dev_err(&dev->intf->dev, "%s: urb status %d\n", __func__, status);
+	if (status) {
+		if (status == -ESHUTDOWN)
+			return;
+		dev_err_ratelimited(&dev->intf->dev, "%s: urb status %d\n",
+				    __func__, status);
+	}
 
 	spin_lock(&dev->ctl_submit_lock);
 
@@ -427,7 +433,7 @@ static void cm109_urb_ctl_callback(struct urb *urb)
 
 	if (likely(!dev->shutdown)) {
 
-		if (dev->buzzer_pending) {
+		if (dev->buzzer_pending || status) {
 			dev->buzzer_pending = 0;
 			dev->ctl_urb_pending = 1;
 			cm109_submit_buzz_toggle(dev);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 7c5d72a6a26..83658472ad2 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -103,6 +103,7 @@ static const struct alps_model_info alps_model_data[] = {
 	/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
 	{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
+	{ { 0x73, 0x00, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_DUALPOINT },		/* Dell XT2 */
 	{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },		/* Dell Vostro 1400 */
 	{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },				/* Toshiba Tecra A11-11L */
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 78e4de42efa..52c9ebf9472 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -223,21 +223,26 @@ static int i8042_flush(void)
 {
 	unsigned long flags;
 	unsigned char data, str;
-	int i = 0;
+	int count = 0;
+	int retval = 0;
 
 	spin_lock_irqsave(&i8042_lock, flags);
 
-	while (((str = i8042_read_status()) & I8042_STR_OBF) && (i < I8042_BUFFER_SIZE)) {
-		udelay(50);
-		data = i8042_read_data();
-		i++;
-		dbg("%02x <- i8042 (flush, %s)\n",
-		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+	while ((str = i8042_read_status()) & I8042_STR_OBF) {
+		if (count++ < I8042_BUFFER_SIZE) {
+			udelay(50);
+			data = i8042_read_data();
+			dbg("%02x <- i8042 (flush, %s)\n",
+			    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		} else {
+			retval = -EIO;
+			break;
+		}
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
-	return i;
+	return retval;
 }
 
 /*
@@ -849,7 +854,7 @@ static int __init i8042_check_aux(void)
 
 static int i8042_controller_check(void)
 {
-	if (i8042_flush() == I8042_BUFFER_SIZE) {
+	if (i8042_flush()) {
 		pr_err("No controller found\n");
 		return -ENODEV;
 	}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 79b69ea47f7..e53416a4d7f 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -1031,6 +1031,7 @@ static void wacom_destroy_leds(struct wacom *wacom)
 }
 
 static enum power_supply_property wacom_battery_props[] = {
+	POWER_SUPPLY_PROP_SCOPE,
 	POWER_SUPPLY_PROP_CAPACITY
 };
 
@@ -1042,6 +1043,9 @@ static int wacom_battery_get_property(struct power_supply *psy,
 	int ret = 0;
 
 	switch (psp) {
+		case POWER_SUPPLY_PROP_SCOPE:
+			val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+			break;
 		case POWER_SUPPLY_PROP_CAPACITY:
 			val->intval =
 				wacom->wacom_wac.battery_capacity * 100 / 31;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b2aa503c16b..c59b797eeaf 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -2054,6 +2054,12 @@ static const struct wacom_features wacom_features_0x101 =
 static const struct wacom_features wacom_features_0x10D =
 	{ "Wacom ISDv4 10D",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
 	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10E =
+	{ "Wacom ISDv4 10E",      WACOM_PKGLEN_MTTPC,     27760, 15694,  255,
+	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0x10F =
+	{ "Wacom ISDv4 10F",      WACOM_PKGLEN_MTTPC,     27760, 15694,  255,
+	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x4001 =
 	{ "Wacom ISDv4 4001",      WACOM_PKGLEN_MTTPC,     26202, 16325,  255,
 	  0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2248,6 +2254,8 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x100) },
 	{ USB_DEVICE_WACOM(0x101) },
 	{ USB_DEVICE_WACOM(0x10D) },
+	{ USB_DEVICE_WACOM(0x10E) },
+	{ USB_DEVICE_WACOM(0x10F) },
 	{ USB_DEVICE_WACOM(0x300) },
 	{ USB_DEVICE_WACOM(0x301) },
 	{ USB_DEVICE_WACOM(0x304) },
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index be12fbfcae1..1ea75236a15 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -552,9 +552,8 @@ static void __ref enable_slot(struct acpiphp_slot *slot)
 	struct acpiphp_func *func;
 	int max, pass;
 	LIST_HEAD(add_list);
-	int nr_found;
 
-	nr_found = acpiphp_rescan_slot(slot);
+	acpiphp_rescan_slot(slot);
 	max = acpiphp_max_busnr(bus);
 	for (pass = 0; pass < 2; pass++) {
 		list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -574,9 +573,6 @@ static void __ref enable_slot(struct acpiphp_slot *slot)
 		}
 	}
 	__pci_bus_assign_resources(bus, &add_list, NULL);
-	/* Nothing more to do here if there are no new devices on this bus. */
-	if (!nr_found && (slot->flags & SLOT_ENABLED))
-		return;
 
 	acpiphp_sanitize_bus(bus);
 	acpiphp_set_hpp_values(bus);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 408a42ef787..f0d432c139d 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -771,6 +771,8 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long
 static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
 {
 	struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+	if (!capable(CAP_SYS_RAWIO))
+		return -EPERM;
 	return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
 }
 
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 5cbc4bb1b39..df5e961484e 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -105,8 +105,11 @@ static int scatter_elem_sz_prev = SG_SCATTER_SZ;
 static int sg_add(struct device *, struct class_interface *);
 static void sg_remove(struct device *, struct class_interface *);
 
+static DEFINE_SPINLOCK(sg_open_exclusive_lock);
+
 static DEFINE_IDR(sg_index_idr);
-static DEFINE_RWLOCK(sg_index_lock);
+static DEFINE_RWLOCK(sg_index_lock);	/* Also used to lock
+							   file descriptor list for device */
 
 static struct class_interface sg_interface = {
 	.add_dev	= sg_add,
@@ -143,7 +146,8 @@ typedef struct sg_request {	/* SG_MAX_QUEUE requests outstanding per file */
 } Sg_request;
 
 typedef struct sg_fd {		/* holds the state of a file descriptor */
-	struct list_head sfd_siblings; /* protected by sfd_lock of device */
+	/* sfd_siblings is protected by sg_index_lock */
+	struct list_head sfd_siblings;
 	struct sg_device *parentdp;	/* owning device */
 	wait_queue_head_t read_wait;	/* queue read until command done */
 	rwlock_t rq_list_lock;	/* protect access to list in req_arr */
@@ -166,12 +170,13 @@ typedef struct sg_fd {		/* holds the state of a file descriptor */
 
 typedef struct sg_device { /* holds the state of each scsi generic device */
 	struct scsi_device *device;
+	wait_queue_head_t o_excl_wait;	/* queue open() when O_EXCL in use */
 	int sg_tablesize;	/* adapter's max scatter-gather table size */
 	u32 index;		/* device index number */
-	spinlock_t sfd_lock;	/* protect file descriptor list for device */
+	/* sfds is protected by sg_index_lock */
 	struct list_head sfds;
-	struct rw_semaphore o_sem;	/* exclude open should hold this rwsem */
 	volatile char detached;	/* 0->attached, 1->detached pending removal */
+	/* exclude protected by sg_open_exclusive_lock */
 	char exclude;		/* opened for exclusive access */
 	char sgdebug;		/* 0->off, 1->sense, 9->dump dev, 10-> all devs */
 	struct gendisk *disk;
@@ -220,14 +225,35 @@ static int sg_allow_access(struct file *filp, unsigned char *cmd)
 	return blk_verify_command(cmd, filp->f_mode & FMODE_WRITE);
 }
 
+static int get_exclude(Sg_device *sdp)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&sg_open_exclusive_lock, flags);
+	ret = sdp->exclude;
+	spin_unlock_irqrestore(&sg_open_exclusive_lock, flags);
+	return ret;
+}
+
+static int set_exclude(Sg_device *sdp, char val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sg_open_exclusive_lock, flags);
+	sdp->exclude = val;
+	spin_unlock_irqrestore(&sg_open_exclusive_lock, flags);
+	return val;
+}
+
 static int sfds_list_empty(Sg_device *sdp)
 {
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&sdp->sfd_lock, flags);
+	read_lock_irqsave(&sg_index_lock, flags);
 	ret = list_empty(&sdp->sfds);
-	spin_unlock_irqrestore(&sdp->sfd_lock, flags);
+	read_unlock_irqrestore(&sg_index_lock, flags);
 	return ret;
 }
 
@@ -239,6 +265,7 @@ sg_open(struct inode *inode, struct file *filp)
 	struct request_queue *q;
 	Sg_device *sdp;
 	Sg_fd *sfp;
+	int res;
 	int retval;
 
 	nonseekable_open(inode, filp);
@@ -267,52 +294,54 @@ sg_open(struct inode *inode, struct file *filp)
 		goto error_out;
 	}
 
-	if ((flags & O_EXCL) && (O_RDONLY == (flags & O_ACCMODE))) {
-		retval = -EPERM; /* Can't lock it with read only access */
-		goto error_out;
-	}
-	if (flags & O_NONBLOCK) {
-		if (flags & O_EXCL) {
-			if (!down_write_trylock(&sdp->o_sem)) {
-				retval = -EBUSY;
-				goto error_out;
-			}
-		} else {
-			if (!down_read_trylock(&sdp->o_sem)) {
-				retval = -EBUSY;
-				goto error_out;
-			}
+	if (flags & O_EXCL) {
+		if (O_RDONLY == (flags & O_ACCMODE)) {
+			retval = -EPERM; /* Can't lock it with read only access */
+			goto error_out;
+		}
+		if (!sfds_list_empty(sdp) && (flags & O_NONBLOCK)) {
+			retval = -EBUSY;
+			goto error_out;
+		}
+		res = wait_event_interruptible(sdp->o_excl_wait,
+					   ((!sfds_list_empty(sdp) || get_exclude(sdp)) ? 0 : set_exclude(sdp, 1)));
+		if (res) {
+			retval = res;	/* -ERESTARTSYS because signal hit process */
+			goto error_out;
+		}
+	} else if (get_exclude(sdp)) {	/* some other fd has an exclusive lock on dev */
+		if (flags & O_NONBLOCK) {
+			retval = -EBUSY;
+			goto error_out;
+		}
+		res = wait_event_interruptible(sdp->o_excl_wait, !get_exclude(sdp));
+		if (res) {
+			retval = res;	/* -ERESTARTSYS because signal hit process */
+			goto error_out;
 		}
-	} else {
-		if (flags & O_EXCL)
-			down_write(&sdp->o_sem);
-		else
-			down_read(&sdp->o_sem);
 	}
-	/* Since write lock is held, no need to check sfd_list */
-	if (flags & O_EXCL)
-		sdp->exclude = 1;	/* used by release lock */
-
+	if (sdp->detached) {
+		retval = -ENODEV;
+		goto error_out;
+	}
 	if (sfds_list_empty(sdp)) {	/* no existing opens on this device */
 		sdp->sgdebug = 0;
 		q = sdp->device->request_queue;
 		sdp->sg_tablesize = queue_max_segments(q);
 	}
-	sfp = sg_add_sfp(sdp, dev);
-	if (!IS_ERR(sfp))
+	if ((sfp = sg_add_sfp(sdp, dev)))
 		filp->private_data = sfp;
-		/* retval is already provably zero at this point because of the
-		 * check after retval = scsi_autopm_get_device(sdp->device))
-		 */
 	else {
-		retval = PTR_ERR(sfp);
-
 		if (flags & O_EXCL) {
-			sdp->exclude = 0;	/* undo if error */
-			up_write(&sdp->o_sem);
-		} else
-			up_read(&sdp->o_sem);
+			set_exclude(sdp, 0);	/* undo if error */
+			wake_up_interruptible(&sdp->o_excl_wait);
+		}
+		retval = -ENOMEM;
+		goto error_out;
+	}
+	retval = 0;
 error_out:
+	if (retval) {
 		scsi_autopm_put_device(sdp->device);
 sdp_put:
 		scsi_device_put(sdp->device);
@@ -329,18 +358,13 @@ sg_release(struct inode *inode, struct file *filp)
 {
 	Sg_device *sdp;
 	Sg_fd *sfp;
-	int excl;
 
 	if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp)))
 		return -ENXIO;
 	SCSI_LOG_TIMEOUT(3, printk("sg_release: %s\n", sdp->disk->disk_name));
 
-	excl = sdp->exclude;
-	sdp->exclude = 0;
-	if (excl)
-		up_write(&sdp->o_sem);
-	else
-		up_read(&sdp->o_sem);
+	set_exclude(sdp, 0);
+	wake_up_interruptible(&sdp->o_excl_wait);
 
 	scsi_autopm_put_device(sdp->device);
 	kref_put(&sfp->f_ref, sg_remove_sfp);
@@ -1391,9 +1415,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp)
 	disk->first_minor = k;
 	sdp->disk = disk;
 	sdp->device = scsidp;
-	spin_lock_init(&sdp->sfd_lock);
 	INIT_LIST_HEAD(&sdp->sfds);
-	init_rwsem(&sdp->o_sem);
+	init_waitqueue_head(&sdp->o_excl_wait);
 	sdp->sg_tablesize = queue_max_segments(q);
 	sdp->index = k;
 	kref_init(&sdp->d_ref);
@@ -1526,13 +1549,11 @@ static void sg_remove(struct device *cl_dev, struct class_interface *cl_intf)
 
 	/* Need a write lock to set sdp->detached. */
 	write_lock_irqsave(&sg_index_lock, iflags);
-	spin_lock(&sdp->sfd_lock);
 	sdp->detached = 1;
 	list_for_each_entry(sfp, &sdp->sfds, sfd_siblings) {
 		wake_up_interruptible(&sfp->read_wait);
 		kill_fasync(&sfp->async_qp, SIGPOLL, POLL_HUP);
 	}
-	spin_unlock(&sdp->sfd_lock);
 	write_unlock_irqrestore(&sg_index_lock, iflags);
 
 	sysfs_remove_link(&scsidp->sdev_gendev.kobj, "generic");
@@ -2043,7 +2064,7 @@ sg_add_sfp(Sg_device * sdp, int dev)
 
 	sfp = kzalloc(sizeof(*sfp), GFP_ATOMIC | __GFP_NOWARN);
 	if (!sfp)
-		return ERR_PTR(-ENOMEM);
+		return NULL;
 
 	init_waitqueue_head(&sfp->read_wait);
 	rwlock_init(&sfp->rq_list_lock);
@@ -2057,13 +2078,9 @@ sg_add_sfp(Sg_device * sdp, int dev)
 	sfp->cmd_q = SG_DEF_COMMAND_Q;
 	sfp->keep_orphan = SG_DEF_KEEP_ORPHAN;
 	sfp->parentdp = sdp;
-	spin_lock_irqsave(&sdp->sfd_lock, iflags);
-	if (sdp->detached) {
-		spin_unlock_irqrestore(&sdp->sfd_lock, iflags);
-		return ERR_PTR(-ENODEV);
-	}
+	write_lock_irqsave(&sg_index_lock, iflags);
 	list_add_tail(&sfp->sfd_siblings, &sdp->sfds);
-	spin_unlock_irqrestore(&sdp->sfd_lock, iflags);
+	write_unlock_irqrestore(&sg_index_lock, iflags);
 	SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: sfp=0x%p\n", sfp));
 	if (unlikely(sg_big_buff != def_reserved_size))
 		sg_big_buff = def_reserved_size;
@@ -2113,9 +2130,10 @@ static void sg_remove_sfp(struct kref *kref)
 	struct sg_device *sdp = sfp->parentdp;
 	unsigned long iflags;
 
-	spin_lock_irqsave(&sdp->sfd_lock, iflags);
+	write_lock_irqsave(&sg_index_lock, iflags);
 	list_del(&sfp->sfd_siblings);
-	spin_unlock_irqrestore(&sdp->sfd_lock, iflags);
+	write_unlock_irqrestore(&sg_index_lock, iflags);
+	wake_up_interruptible(&sdp->o_excl_wait);
 
 	INIT_WORK(&sfp->ew.work, sg_remove_sfp_usercontext);
 	schedule_work(&sfp->ew.work);
@@ -2502,7 +2520,7 @@ static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v)
 	return 0;
 }
 
-/* must be called while holding sg_index_lock and sfd_lock */
+/* must be called while holding sg_index_lock */
 static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
 {
 	int k, m, new_interface, blen, usg;
@@ -2587,26 +2605,22 @@ static int sg_proc_seq_show_debug(struct seq_file *s, void *v)
 
 	read_lock_irqsave(&sg_index_lock, iflags);
 	sdp = it ? sg_lookup_dev(it->index) : NULL;
-	if (sdp) {
-		spin_lock(&sdp->sfd_lock);
-		if (!list_empty(&sdp->sfds)) {
-			struct scsi_device *scsidp = sdp->device;
+	if (sdp && !list_empty(&sdp->sfds)) {
+		struct scsi_device *scsidp = sdp->device;
 
-			seq_printf(s, " >>> device=%s ", sdp->disk->disk_name);
-			if (sdp->detached)
-				seq_printf(s, "detached pending close ");
-			else
-				seq_printf
-				    (s, "scsi%d chan=%d id=%d lun=%d   em=%d",
-				     scsidp->host->host_no,
-				     scsidp->channel, scsidp->id,
-				     scsidp->lun,
-				     scsidp->host->hostt->emulated);
-			seq_printf(s, " sg_tablesize=%d excl=%d\n",
-				   sdp->sg_tablesize, sdp->exclude);
-			sg_proc_debug_helper(s, sdp);
-		}
-		spin_unlock(&sdp->sfd_lock);
+		seq_printf(s, " >>> device=%s ", sdp->disk->disk_name);
+		if (sdp->detached)
+			seq_printf(s, "detached pending close ");
+		else
+			seq_printf
+			    (s, "scsi%d chan=%d id=%d lun=%d   em=%d",
+			     scsidp->host->host_no,
+			     scsidp->channel, scsidp->id,
+			     scsidp->lun,
+			     scsidp->host->hostt->emulated);
+		seq_printf(s, " sg_tablesize=%d excl=%d\n",
+			   sdp->sg_tablesize, get_exclude(sdp));
+		sg_proc_debug_helper(s, sdp);
 	}
 	read_unlock_irqrestore(&sg_index_lock, iflags);
 	return 0;
diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index f91bc1fdd89..639ba96adb3 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -1960,6 +1960,7 @@ cntrlEnd:
 
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Called IOCTL_BCM_GET_DEVICE_DRIVER_INFO\n");
 
+		memset(&DevInfo, 0, sizeof(DevInfo));
 		DevInfo.MaxRDMBufferSize = BUFFER_4K;
 		DevInfo.u32DSDStartOffset = EEPROM_CALPARAM_START;
 		DevInfo.u32RxAlignmentCorrection = 0;
diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c
index 6ccb64fb078..6ce0af9977d 100644
--- a/drivers/staging/ozwpan/ozcdev.c
+++ b/drivers/staging/ozwpan/ozcdev.c
@@ -155,6 +155,9 @@ static ssize_t oz_cdev_write(struct file *filp, const char __user *buf,
 	struct oz_app_hdr *app_hdr;
 	struct oz_serial_ctx *ctx;
 
+	if (count > sizeof(ei->data) - sizeof(*elt) - sizeof(*app_hdr))
+		return -EINVAL;
+
 	spin_lock_bh(&g_cdev.lock);
 	pd = g_cdev.active_pd;
 	if (pd)
diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
index 23db32f07fd..a10cdb17038 100644
--- a/drivers/staging/sb105x/sb_pci_mp.c
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -1063,7 +1063,7 @@ static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg)
 
 static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt)
 {
-	struct serial_icounter_struct icount;
+	struct serial_icounter_struct icount = {};
 	struct sb_uart_icount cnow;
 	struct sb_uart_port *port = state->port;
 
diff --git a/drivers/staging/wlags49_h2/wl_priv.c b/drivers/staging/wlags49_h2/wl_priv.c
index c97e0e154d2..7e10dcdc309 100644
--- a/drivers/staging/wlags49_h2/wl_priv.c
+++ b/drivers/staging/wlags49_h2/wl_priv.c
@@ -570,6 +570,7 @@ int wvlan_uil_put_info(struct uilreq *urq, struct wl_private *lp)
 	ltv_t                   *pLtv;
 	bool_t                  ltvAllocated = FALSE;
 	ENCSTRCT                sEncryption;
+	size_t			len;
 
 #ifdef USE_WDS
 	hcf_16                  hcfPort  = HCF_PORT_0;
@@ -686,7 +687,8 @@ int wvlan_uil_put_info(struct uilreq *urq, struct wl_private *lp)
 					break;
 				case CFG_CNF_OWN_NAME:
 					memset(lp->StationName, 0, sizeof(lp->StationName));
-					memcpy((void *)lp->StationName, (void *)&pLtv->u.u8[2], (size_t)pLtv->u.u16[0]);
+					len = min_t(size_t, pLtv->u.u16[0], sizeof(lp->StationName));
+					strlcpy(lp->StationName, &pLtv->u.u8[2], len);
 					pLtv->u.u16[0] = CNV_INT_TO_LITTLE(pLtv->u.u16[0]);
 					break;
 				case CFG_CNF_LOAD_BALANCING:
@@ -1783,6 +1785,7 @@ int wvlan_set_station_nickname(struct net_device *dev,
 {
 	struct wl_private *lp = wl_priv(dev);
 	unsigned long flags;
+	size_t len;
 	int         ret = 0;
 	/*------------------------------------------------------------------------*/
 
@@ -1793,8 +1796,8 @@ int wvlan_set_station_nickname(struct net_device *dev,
 	wl_lock(lp, &flags);
 
 	memset(lp->StationName, 0, sizeof(lp->StationName));
-
-	memcpy(lp->StationName, extra, wrqu->data.length);
+	len = min_t(size_t, wrqu->data.length, sizeof(lp->StationName));
+	strlcpy(lp->StationName, extra, len);
 
 	/* Commit the adapter parameters */
 	wl_apply(lp);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index d067285a2d2..6b0f75eac8a 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1499,7 +1499,7 @@ static void atmel_set_ops(struct uart_port *port)
 /*
  * Get ip name usart or uart
  */
-static int atmel_get_ip_name(struct uart_port *port)
+static void atmel_get_ip_name(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 	int name = UART_GET_IP_NAME(port);
@@ -1518,10 +1518,7 @@ static int atmel_get_ip_name(struct uart_port *port)
 		atmel_port->is_usart = false;
 	} else {
 		dev_err(port->dev, "Not supported ip name, set to uart\n");
-		return -EINVAL;
 	}
-
-	return 0;
 }
 
 /*
@@ -2405,9 +2402,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	/*
 	 * Get port name of usart or uart
 	 */
-	ret = atmel_get_ip_name(&port->uart);
-	if (ret < 0)
-		goto err_add_port;
+	atmel_get_ip_name(&port->uart);
 
 	return 0;
 
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index ba475632c5f..0e808cf91d9 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -642,16 +642,29 @@ static int uio_mmap_physical(struct vm_area_struct *vma)
 {
 	struct uio_device *idev = vma->vm_private_data;
 	int mi = uio_find_mem_index(vma);
+	struct uio_mem *mem;
 	if (mi < 0)
 		return -EINVAL;
+	mem = idev->info->mem + mi;
 
-	vma->vm_ops = &uio_physical_vm_ops;
+	if (vma->vm_end - vma->vm_start > mem->size)
+		return -EINVAL;
 
+	vma->vm_ops = &uio_physical_vm_ops;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
+	/*
+	 * We cannot use the vm_iomap_memory() helper here,
+	 * because vma->vm_pgoff is the map index we looked
+	 * up above in uio_find_mem_index(), rather than an
+	 * actual page offset into the mmap.
+	 *
+	 * So we just do the physical mmap without a page
+	 * offset.
+	 */
 	return remap_pfn_range(vma,
 			       vma->vm_start,
-			       idev->info->mem[mi].addr >> PAGE_SHIFT,
+			       mem->addr >> PAGE_SHIFT,
 			       vma->vm_end - vma->vm_start,
 			       vma->vm_page_prot);
 }
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c45f9c0a1b3..b21d553c245 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -904,6 +904,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	/* Crucible Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1b8af461b52..a7019d1e305 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1307,3 +1307,9 @@
  * Manufacturer: Crucible Technologies
  */
 #define FTDI_CT_COMET_PID	0x8e08
+
+/*
+ * Product: Z3X Box
+ * Manufacturer: Smart GSM Team
+ */
+#define FTDI_Z3X_PID		0x0011
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index bedf8e47713..1e6de4cd079 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -4,11 +4,6 @@
  * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2003 IBM Corp.
  *
- * Copyright (C) 2009, 2013 Frank Schäfer <fschaefer.oss@googlemail.com>
- *  - fixes, improvements and documentation for the baud rate encoding methods
- * Copyright (C) 2013 Reinhard Max <max@suse.de>
- *  - fixes and improvements for the divisor based baud rate encoding method
- *
  * Original driver for 2.2.x by anonymous
  *
  *	This program is free software; you can redistribute it and/or
@@ -134,18 +129,10 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 
 enum pl2303_type {
-	type_0,		/* H version ? */
-	type_1,		/* H version ? */
-	HX_TA,		/* HX(A) / X(A) / TA version  */ /* TODO: improve */
-	HXD_EA_RA_SA,	/* HXD / EA / RA / SA version */ /* TODO: improve */
-	TB,		/* TB version */
-	HX_CLONE,	/* Cheap and less functional clone of the HX chip */
+	type_0,		/* don't know the difference between type 0 and */
+	type_1,		/* type 1, until someone from prolific tells us... */
+	HX,		/* HX version of the pl2303 chip */
 };
-/*
- * NOTE: don't know the difference between type 0 and type 1,
- * until someone from Prolific tells us...
- * TODO: distinguish between X/HX, TA and HXD, EA, RA, SA variants
- */
 
 struct pl2303_serial_private {
 	enum pl2303_type type;
@@ -185,7 +172,6 @@ static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_serial_private *spriv;
 	enum pl2303_type type = type_0;
-	char *type_str = "unknown (treating as type_0)";
 	unsigned char *buf;
 
 	spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
@@ -198,53 +184,15 @@ static int pl2303_startup(struct usb_serial *serial)
 		return -ENOMEM;
 	}
 
-	if (serial->dev->descriptor.bDeviceClass == 0x02) {
+	if (serial->dev->descriptor.bDeviceClass == 0x02)
 		type = type_0;
-		type_str = "type_0";
-	} else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) {
-		/*
-		 * NOTE: The bcdDevice version is the only difference between
-		 * the device descriptors of the X/HX, HXD, EA, RA, SA, TA, TB
-		 */
-		if (le16_to_cpu(serial->dev->descriptor.bcdDevice) == 0x300) {
-			/* Check if the device is a clone */
-			pl2303_vendor_read(0x9494, 0, serial, buf);
-			/*
-			 * NOTE: Not sure if this read is really needed.
-			 * The HX returns 0x00, the clone 0x02, but the Windows
-			 * driver seems to ignore the value and continues.
-			 */
-			pl2303_vendor_write(0x0606, 0xaa, serial);
-			pl2303_vendor_read(0x8686, 0, serial, buf);
-			if (buf[0] != 0xaa) {
-				type = HX_CLONE;
-				type_str = "X/HX clone (limited functionality)";
-			} else {
-				type = HX_TA;
-				type_str = "X/HX/TA";
-			}
-			pl2303_vendor_write(0x0606, 0x00, serial);
-		} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
-								     == 0x400) {
-			type = HXD_EA_RA_SA;
-			type_str = "HXD/EA/RA/SA";
-		} else if (le16_to_cpu(serial->dev->descriptor.bcdDevice)
-								     == 0x500) {
-			type = TB;
-			type_str = "TB";
-		} else {
-			dev_info(&serial->interface->dev,
-					   "unknown/unsupported device type\n");
-			kfree(spriv);
-			kfree(buf);
-			return -ENODEV;
-		}
-	} else if (serial->dev->descriptor.bDeviceClass == 0x00
-		   || serial->dev->descriptor.bDeviceClass == 0xFF) {
+	else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
+		type = HX;
+	else if (serial->dev->descriptor.bDeviceClass == 0x00)
 		type = type_1;
-		type_str = "type_1";
-	}
-	dev_dbg(&serial->interface->dev, "device type: %s\n", type_str);
+	else if (serial->dev->descriptor.bDeviceClass == 0xFF)
+		type = type_1;
+	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
 	spriv->type = type;
 	usb_set_serial_data(serial, spriv);
@@ -259,10 +207,10 @@ static int pl2303_startup(struct usb_serial *serial)
 	pl2303_vendor_read(0x8383, 0, serial, buf);
 	pl2303_vendor_write(0, 1, serial);
 	pl2303_vendor_write(1, 0, serial);
-	if (type == type_0 || type == type_1)
-		pl2303_vendor_write(2, 0x24, serial);
-	else
+	if (type == HX)
 		pl2303_vendor_write(2, 0x44, serial);
+	else
+		pl2303_vendor_write(2, 0x24, serial);
 
 	kfree(buf);
 	return 0;
@@ -316,174 +264,65 @@ static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
 	return retval;
 }
 
-static int pl2303_baudrate_encode_direct(int baud, enum pl2303_type type,
-								      u8 buf[4])
+static void pl2303_encode_baudrate(struct tty_struct *tty,
+					struct usb_serial_port *port,
+					u8 buf[4])
 {
-	/*
-	 * NOTE: Only the values defined in baud_sup are supported !
-	 * => if unsupported values are set, the PL2303 uses 9600 baud instead
-	 * => HX clones just don't work at unsupported baud rates < 115200 baud,
-	 *    for baud rates > 115200 they run at 115200 baud
-	 */
 	const int baud_sup[] = { 75, 150, 300, 600, 1200, 1800, 2400, 3600,
-				 4800, 7200, 9600, 14400, 19200, 28800, 38400,
-				 57600, 115200, 230400, 460800, 614400, 921600,
-				 1228800, 2457600, 3000000, 6000000, 12000000 };
+	                         4800, 7200, 9600, 14400, 19200, 28800, 38400,
+	                         57600, 115200, 230400, 460800, 500000, 614400,
+	                         921600, 1228800, 2457600, 3000000, 6000000 };
+
+	struct usb_serial *serial = port->serial;
+	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
+	int baud;
+	int i;
+
 	/*
-	 * NOTE: With the exception of type_0/1 devices, the following
-	 * additional baud rates are supported (tested with HX rev. 3A only):
-	 * 110*, 56000*, 128000, 134400, 161280, 201600, 256000*, 268800,
-	 * 403200, 806400.	(*: not HX and HX clones)
-	 *
-	 * Maximum values: HXD, TB: 12000000; HX, TA: 6000000;
-	 *                 type_0+1: 1228800; RA: 921600; HX clones, SA: 115200
-	 *
-	 * As long as we are not using this encoding method for anything else
-	 * than the type_0+1, HX and HX clone chips, there is no point in
-	 * complicating the code to support them.
+	 * NOTE: Only the values defined in baud_sup are supported!
+	 *       => if unsupported values are set, the PL2303 seems to use
+	 *          9600 baud (at least my PL2303X always does)
 	 */
-	int i;
+	baud = tty_get_baud_rate(tty);
+	dev_dbg(&port->dev, "baud requested = %d\n", baud);
+	if (!baud)
+		return;
 
 	/* Set baudrate to nearest supported value */
 	for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
 		if (baud_sup[i] > baud)
 			break;
 	}
+
 	if (i == ARRAY_SIZE(baud_sup))
 		baud = baud_sup[i - 1];
 	else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
 		baud = baud_sup[i - 1];
 	else
 		baud = baud_sup[i];
-	/* Respect the chip type specific baud rate limits */
-	/*
-	 * FIXME: as long as we don't know how to distinguish between the
-	 * HXD, EA, RA, and SA chip variants, allow the max. value of 12M.
-	 */
-	if (type == HX_TA)
-		baud = min_t(int, baud, 6000000);
-	else if (type == type_0 || type == type_1)
-		baud = min_t(int, baud, 1228800);
-	else if (type == HX_CLONE)
-		baud = min_t(int, baud, 115200);
-	/* Direct (standard) baud rate encoding method */
-	put_unaligned_le32(baud, buf);
-
-	return baud;
-}
 
-static int pl2303_baudrate_encode_divisor(int baud, enum pl2303_type type,
-								      u8 buf[4])
-{
-	/*
-	 * Divisor based baud rate encoding method
-	 *
-	 * NOTE: HX clones do NOT support this method.
-	 * It's not clear if the type_0/1 chips support it.
-	 *
-	 * divisor = 12MHz * 32 / baudrate = 2^A * B
-	 *
-	 * with
-	 *
-	 * A = buf[1] & 0x0e
-	 * B = buf[0]  +  (buf[1] & 0x01) << 8
-	 *
-	 * Special cases:
-	 * => 8 < B < 16: device seems to work not properly
-	 * => B <= 8: device uses the max. value B = 512 instead
-	 */
-	unsigned int A, B;
+	/* type_0, type_1 only support up to 1228800 baud */
+	if (spriv->type != HX)
+		baud = min_t(int, baud, 1228800);
 
-	/*
-	 * NOTE: The Windows driver allows maximum baud rates of 110% of the
-	 * specified maximium value.
-	 * Quick tests with early (2004) HX (rev. A) chips suggest, that even
-	 * higher baud rates (up to the maximum of 24M baud !) are working fine,
-	 * but that should really be tested carefully in "real life" scenarios
-	 * before removing the upper limit completely.
-	 * Baud rates smaller than the specified 75 baud are definitely working
-	 * fine.
-	 */
-	if (type == type_0 || type == type_1)
-		baud = min_t(int, baud, 1228800 * 1.1);
-	else if (type == HX_TA)
-		baud = min_t(int, baud, 6000000 * 1.1);
-	else if (type == HXD_EA_RA_SA)
-		/* HXD, EA: 12Mbps; RA: 1Mbps; SA: 115200 bps */
-		/*
-		 * FIXME: as long as we don't know how to distinguish between
-		 * these chip variants, allow the max. of these values
-		 */
-		baud = min_t(int, baud, 12000000 * 1.1);
-	else if (type == TB)
-		baud = min_t(int, baud, 12000000 * 1.1);
-	/* Determine factors A and B */
-	A = 0;
-	B = 12000000 * 32 / baud;  /* 12MHz */
-	B <<= 1; /* Add one bit for rounding */
-	while (B > (512 << 1) && A <= 14) {
-		A += 2;
-		B >>= 2;
-	}
-	if (A > 14) { /* max. divisor = min. baudrate reached */
-		A = 14;
-		B = 512;
-		/* => ~45.78 baud */
+	if (baud <= 115200) {
+		put_unaligned_le32(baud, buf);
 	} else {
-		B = (B + 1) >> 1; /* Round the last bit */
-	}
-	/* Handle special cases */
-	if (B == 512)
-		B = 0; /* also: 1 to 8 */
-	else if (B < 16)
 		/*
-		 * NOTE: With the current algorithm this happens
-		 * only for A=0 and means that the min. divisor
-		 * (respectively: the max. baudrate) is reached.
+		 * Apparently the formula for higher speeds is:
+		 * baudrate = 12M * 32 / (2^buf[1]) / buf[0]
 		 */
-		B = 16;		/* => 24 MBaud */
-	/* Encode the baud rate */
-	buf[3] = 0x80;     /* Select divisor encoding method */
-	buf[2] = 0;
-	buf[1] = (A & 0x0e);		/* A */
-	buf[1] |= ((B & 0x100) >> 8);	/* MSB of B */
-	buf[0] = B & 0xff;		/* 8 LSBs of B */
-	/* Calculate the actual/resulting baud rate */
-	if (B <= 8)
-		B = 512;
-	baud = 12000000 * 32 / ((1 << A) * B);
-
-	return baud;
-}
-
-static void pl2303_encode_baudrate(struct tty_struct *tty,
-					struct usb_serial_port *port,
-					enum pl2303_type type,
-					u8 buf[4])
-{
-	int baud;
+		unsigned tmp = 12000000 * 32 / baud;
+		buf[3] = 0x80;
+		buf[2] = 0;
+		buf[1] = (tmp >= 256);
+		while (tmp >= 256) {
+			tmp >>= 2;
+			buf[1] <<= 1;
+		}
+		buf[0] = tmp;
+	}
 
-	baud = tty_get_baud_rate(tty);
-	dev_dbg(&port->dev, "baud requested = %d\n", baud);
-	if (!baud)
-		return;
-	/*
-	 * There are two methods for setting/encoding the baud rate
-	 * 1) Direct method: encodes the baud rate value directly
-	 *    => supported by all chip types
-	 * 2) Divisor based method: encodes a divisor to a base value (12MHz*32)
-	 *    => not supported by HX clones (and likely type_0/1 chips)
-	 *
-	 * NOTE: Although the divisor based baud rate encoding method is much
-	 * more flexible, some of the standard baud rate values can not be
-	 * realized exactly. But the difference is very small (max. 0.2%) and
-	 * the device likely uses the same baud rate generator for both methods
-	 * so that there is likley no difference.
-	 */
-	if (type == type_0 || type == type_1 || type == HX_CLONE)
-		baud = pl2303_baudrate_encode_direct(baud, type, buf);
-	else
-		baud = pl2303_baudrate_encode_divisor(baud, type, buf);
 	/* Save resulting baud rate */
 	tty_encode_baud_rate(tty, baud, baud);
 	dev_dbg(&port->dev, "baud set = %d\n", baud);
@@ -540,8 +379,8 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 	}
 
-	/* For reference:   buf[0]:buf[3] baud rate value */
-	pl2303_encode_baudrate(tty, port, spriv->type, buf);
+	/* For reference buf[0]:buf[3] baud rate value */
+	pl2303_encode_baudrate(tty, port, &buf[0]);
 
 	/* For reference buf[4]=0 is 1 stop bits */
 	/* For reference buf[4]=1 is 1.5 stop bits */
@@ -618,10 +457,10 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %7ph\n", i, buf);
 
 	if (C_CRTSCTS(tty)) {
-		if (spriv->type == type_0 || spriv->type == type_1)
-			pl2303_vendor_write(0x0, 0x41, serial);
-		else
+		if (spriv->type == HX)
 			pl2303_vendor_write(0x0, 0x61, serial);
+		else
+			pl2303_vendor_write(0x0, 0x41, serial);
 	} else {
 		pl2303_vendor_write(0x0, 0x0, serial);
 	}
@@ -658,7 +497,7 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
 	int result;
 
-	if (spriv->type == type_0 || spriv->type == type_1) {
+	if (spriv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
 	} else {
@@ -833,7 +672,6 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
-	/* NOTE: HX clones don't support sending breaks, -EPIPE is returned */
 	if (result)
 		dev_err(&port->dev, "error sending break = %d\n", result);
 }
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index a54ccdc4d66..22ad85242e5 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -361,37 +361,13 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
 int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 {
 	struct au1100fb_device *fbdev;
-	unsigned int len;
-	unsigned long start=0, off;
 
 	fbdev = to_au1100fb_device(fbi);
 
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
-		return -EINVAL;
-	}
-
-	start = fbdev->fb_phys & PAGE_MASK;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	if ((vma->vm_end - vma->vm_start + off) > len) {
-		return -EINVAL;
-	}
-
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	pgprot_val(vma->vm_page_prot) |= (6 << 9); //CCA=6
 
-	if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				vma->vm_end - vma->vm_start,
-				vma->vm_page_prot)) {
-		return -EAGAIN;
-	}
-
-	return 0;
+	return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len);
 }
 
 static struct fb_ops au1100fb_ops =
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 301224ecc95..1d02897d17f 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1233,34 +1233,13 @@ static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
  * method mainly to allow the use of the TLB streaming flag (CCA=6)
  */
 static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-
 {
-	unsigned int len;
-	unsigned long start=0, off;
 	struct au1200fb_device *fbdev = info->par;
 
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
-		return -EINVAL;
-	}
-
-	start = fbdev->fb_phys & PAGE_MASK;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	if ((vma->vm_end - vma->vm_start + off) > len) {
-		return -EINVAL;
-	}
-
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
 
-	return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				  vma->vm_end - vma->vm_start,
-				  vma->vm_page_prot);
+	return vm_iomap_memory(vma, fbdev->fb_phys, fbdev->fb_len);
 }
 
 static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)