drivers/usb: Remove unnecessary return's from void functions

Greg prefers this to go through the trivial tree.
http://lkml.org/lkml/2010/6/24/1

There are about 2500 void functions in drivers/usb
Only a few used return; at end of function.

Standardize them a bit.

Moved a statement down a line in drivers/usb/host/u132-hcd.c

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

14 files changed, 0 insertions, 46 deletions

diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f5d06746cc3..2edf238b00b 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1320,8 +1320,6 @@ continue_read:
 			cypress_set_dead(port);
 		}
 	}
-
-	return;
 } /* cypress_read_int_callback */
 
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e298dc4baed..e34023ff577 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2065,7 +2065,6 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		/* lower DTR/RTS */
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	}
-	return;
 }
 
 static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index a42b29a695b..26710b18991 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1264,7 +1264,6 @@ static void garmin_read_bulk_callback(struct urb *urb)
 		garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE;
 		spin_unlock_irqrestore(&garmin_data_p->lock, flags);
 	}
-	return;
 }
 
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 76e6fb3aab7..892e916ef67 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1465,8 +1465,6 @@ static void edge_throttle(struct tty_struct *tty)
 		if (status != 0)
 			return;
 	}
-
-	return;
 }
 
 
@@ -1770,8 +1768,6 @@ static void edge_break(struct tty_struct *tty, int break_state)
 			dbg("%s - error sending break set/clear command.",
 				__func__);
 	}
-
-	return;
 }
 
 
@@ -2042,7 +2038,6 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 		dbg("%s - Unrecognized IOSP status code %u", __func__, code);
 		break;
 	}
-	return;
 }
 
 
@@ -2095,8 +2090,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
 
 	/* Save the new modem status */
 	edge_port->shadowMSR = newMsr & 0xf0;
-
-	return;
 }
 
 
@@ -2143,8 +2136,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 		icount->parity++;
 	if (newLsr & LSR_FRM_ERR)
 		icount->frame++;
-
-	return;
 }
 
 
@@ -2720,7 +2711,6 @@ static void change_port_settings(struct tty_struct *tty,
 		baud = tty_termios_baud_rate(old_termios);
 		tty_encode_baud_rate(tty, baud, baud);
 	}
-	return;
 }
 
 
@@ -2922,7 +2912,6 @@ static void load_application_firmware(struct edgeport_serial *edge_serial)
 				    0x40, 0x4000, 0x0001, NULL, 0, 3000);
 
 	release_firmware(fw);
-	return;
 }
 
 
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 0fca2659206..4a6da66d5fd 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1571,8 +1571,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 		}
 	}
 	tty_kref_put(tty);
-
-	return;
 }
 
 static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
@@ -2424,7 +2422,6 @@ static void change_port_settings(struct tty_struct *tty,
 		dbg("%s - error %d when trying to write config to device",
 		     __func__, status);
 	kfree(config);
-	return;
 }
 
 static void edge_set_termios(struct tty_struct *tty,
@@ -2445,7 +2442,6 @@ static void edge_set_termios(struct tty_struct *tty,
 		return;
 	/* change the port settings to the new ones specified */
 	change_port_settings(tty, edge_port, old_termios);
-	return;
 }
 
 static int edge_tiocmset(struct tty_struct *tty, struct file *file,
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 74551cb2e8e..55766a65f0a 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -801,7 +801,6 @@ static void read_rxcmd_callback(struct urb *urb)
 			  iuu_uart_read_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	dbg("%s - submit result = %d", __func__, result);
-	return;
 }
 
 static int iuu_uart_on(struct usb_serial_port *port)
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 185fe9a7d4e..a10dd5676cc 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -292,7 +292,6 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 	port->interrupt_in_urb->dev = port->serial->dev;
 	if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
 		dbg(" usb_submit_urb(read urb) failed");
-	return;
 }
 
 
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 30922a7e334..f442333dfa9 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -827,7 +827,6 @@ exit:
 		dev_err(&urb->dev->dev,
 			"%s - Error %d submitting control urb\n",
 			__func__, result);
-	return;
 }
 
 /*
@@ -907,7 +906,6 @@ exit:
 		dev_err(&urb->dev->dev,
 			"%s - Error %d submitting control urb\n",
 			__func__, result);
-	return;
 }
 
 /*
@@ -1227,8 +1225,6 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
 	mos7720_port->shadowLCR  = data;
 	write_mos_reg(serial, port->number - port->serial->minor,
 		      LCR, mos7720_port->shadowLCR);
-
-	return;
 }
 
 /*
@@ -1746,7 +1742,6 @@ static void change_port_settings(struct tty_struct *tty,
 			dbg("usb_submit_urb(read bulk) failed, status = %d",
 			    status);
 	}
-	return;
 }
 
 /*
@@ -1803,7 +1798,6 @@ static void mos7720_set_termios(struct tty_struct *tty,
 			dbg("usb_submit_urb(read bulk) failed, status = %d",
 			    status);
 	}
-	return;
 }
 
 /*
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 585b7e66374..d3fc30c5959 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1355,8 +1355,6 @@ static void mos7840_break(struct tty_struct *tty, int break_state)
 	    mos7840_port->shadowLCR);
 	mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
 			     mos7840_port->shadowLCR);
-
-	return;
 }
 
 /*****************************************************************************
@@ -1587,8 +1585,6 @@ static void mos7840_throttle(struct tty_struct *tty)
 		if (status < 0)
 			return;
 	}
-
-	return;
 }
 
 /*****************************************************************************
@@ -2063,8 +2059,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 	mos7840_port->delta_msr_cond = 1;
 	dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x",
 	    mos7840_port->shadowLCR);
-
-	return;
 }
 
 /*****************************************************************************
@@ -2133,7 +2127,6 @@ static void mos7840_set_termios(struct tty_struct *tty,
 			mos7840_port->read_urb_busy = false;
 		}
 	}
-	return;
 }
 
 /*****************************************************************************
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 89c724c0ac0..60f38d5e64f 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -246,8 +246,6 @@ static void omninet_read_bulk_callback(struct urb *urb)
 		dev_err(&port->dev,
 			"%s - failed resubmitting read urb, error %d\n",
 			__func__, result);
-
-	return;
 }
 
 static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index d47b56e9e8c..7481ff8a49e 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -620,8 +620,6 @@ static void sierra_indat_callback(struct urb *urb)
 			dev_err(&port->dev, "resubmit read urb failed."
 				"(%d)\n", err);
 	}
-
-	return;
 }
 
 static void sierra_instat_callback(struct urb *urb)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 329d311a35d..765aa983bf5 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -441,7 +441,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 		spcp8x5_set_workMode(serial->dev, 0x000a,
 				     SET_WORKING_MODE_U2C, priv->type);
 	}
-	return;
 }
 
 /* open the serial port. do some usb system call. set termios and get the line
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 0c70b4a621b..fbc94679780 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -234,7 +234,6 @@ static void usb_wwan_indat_callback(struct urb *urb)
 		}
 
 	}
-	return;
 }
 
 static void usb_wwan_outdat_callback(struct urb *urb)
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 12ed8209ca7..3f9ac88d588 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -655,8 +655,6 @@ static void whiteheat_release(struct usb_serial *serial)
 		}
 		kfree(info);
 	}
-
-	return;
 }
 
 static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
@@ -955,8 +953,6 @@ static void whiteheat_throttle(struct tty_struct *tty)
 	spin_lock_irq(&info->lock);
 	info->flags |= THROTTLED;
 	spin_unlock_irq(&info->lock);
-
-	return;
 }
 
 
@@ -975,8 +971,6 @@ static void whiteheat_unthrottle(struct tty_struct *tty)
 
 	if (actually_throttled)
 		rx_data_softint(&info->rx_work);
-
-	return;
 }