USB host: Move AMD PLL quirk to pci-quirks.c

This patch moves the AMD PLL quirk code in OHCI/EHCI driver to pci-quirks.c,
and exports the functions to be used by xHCI driver later.

AMD PLL quirk disable the optional PM feature inside specific
SB700/SB800/Hudson-2/3 platforms under the following conditions:

1. If an isochronous device is connected to OHCI/EHCI/xHCI port and is active;
2. Optional PM feature that powers down the internal Bus PLL when the link is
   in low power state is enabled.

Without AMD PLL quirk, USB isochronous stream may stutter or have breaks
occasionally, which greatly impair the performance of audio/video streams.

Currently AMD PLL quirk is implemented in OHCI and EHCI driver, and will be
added to xHCI driver too. They are doing similar things actually, so move
the quirk code to pci-quirks.c, which has several advantages:

1. Remove duplicate defines and functions in OHCI/EHCI (and xHCI) driver and
   make them cleaner;
2. AMD chipset information will be probed only once and then stored.
   Currently they're probed during every OHCI/EHCI initialization, move
   the detect code to pci-quirks.c saves the repeat detect cost;
3. Build up synchronization among OHCI/EHCI/xHCI driver. In current
   code, every host controller enable/disable PLL only according to
   its own status, and may enable PLL while there is still isoc transfer on
   other HCs. Move the quirk to pci-quirks.c prevents this issue.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alex He <alex.he@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 6 insertions, 39 deletions

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 07bb982e59f..d5eaea7caf8 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -44,42 +44,6 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
-static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci)
-{
-	struct pci_dev *amd_smbus_dev;
-	u8 rev = 0;
-
-	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (amd_smbus_dev) {
-		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
-		if (rev < 0x40) {
-			pci_dev_put(amd_smbus_dev);
-			amd_smbus_dev = NULL;
-			return 0;
-		}
-	} else {
-		amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL);
-		if (!amd_smbus_dev)
-			return 0;
-		pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
-		if (rev < 0x11 || rev > 0x18) {
-			pci_dev_put(amd_smbus_dev);
-			amd_smbus_dev = NULL;
-			return 0;
-		}
-	}
-
-	if (!amd_nb_dev)
-		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
-
-	ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n");
-
-	pci_dev_put(amd_smbus_dev);
-	amd_smbus_dev = NULL;
-
-	return 1;
-}
-
 /* called during probe() after chip reset completes */
 static int ehci_pci_setup(struct usb_hcd *hcd)
 {
@@ -138,9 +102,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
-	if (ehci_quirk_amd_hudson(ehci))
-		ehci->amd_l1_fix = 1;
-
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -191,6 +152,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_AMD:
+		/* AMD PLL quirk */
+		if (usb_amd_find_chipset_info())
+			ehci->amd_pll_fix = 1;
 		/* AMD8111 EHCI doesn't work, according to AMD errata */
 		if (pdev->device == 0x7463) {
 			ehci_info(ehci, "ignoring AMD8111 (errata)\n");
@@ -236,6 +200,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_ATI:
+		/* AMD PLL quirk */
+		if (usb_amd_find_chipset_info())
+			ehci->amd_pll_fix = 1;
 		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */