Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This is the branch where we usually queue up cleanup efforts, moving
  drivers out of the architecture directory, header file restructuring,
  etc.  Sometimes they tangle with new development so it's hard to keep
  it strictly to cleanups.

  Some of the things included in this branch are:

   * Atmel SAMA5 conversion to common clock
   * Reset framework conversion for tegra platforms
    - Some of this depends on tegra clock driver reworks that are shared
      with Mike Turquette's clk tree.
   * Tegra DMA refactoring, which are shared branches with the DMA tree.
   * Removal of some header files on exynos to prepare for
     multiplatform"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: mvebu: move Armada 370/XP specific definitions to armada-370-xp.h
  ARM: mvebu: remove prototypes of non-existing functions from common.h
  ARM: mvebu: move ARMADA_XP_MAX_CPUS to armada-370-xp.h
  serial: sh-sci: Rework baud rate calculation
  serial: sh-sci: Compute overrun_bit without using baud rate algo
  serial: sh-sci: Remove unused GPIO request code
  serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
  serial: sh-sci: Support resources passed through platform resources
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Sort headers alphabetically
  ARM: EXYNOS: Kill exynos_pm_late_initcall()
  ARM: EXYNOS: Consolidate selection of PM_GENERIC_DOMAINS for Exynos4
  ARM: at91: switch Calao QIL-A9260 board to DT
  clk: at91: fix pmc_clk_ids data type attriubte
  PM / devfreq: use inclusion <mach/map.h> instead of <plat/map-s5p.h>
  ARM: EXYNOS: remove <mach/regs-clock.h> for exynos
  ...

3 files changed, 170 insertions, 190 deletions

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index dfe79ccc4fb..d5c2a287b7e 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -34,6 +34,7 @@
 #include <linux/of_device.h>
 #include <linux/pagemap.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/serial.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_core.h>
@@ -44,8 +45,6 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 
-#include <linux/clk/tegra.h>
-
 #define TEGRA_UART_TYPE				"TEGRA_UART"
 #define TX_EMPTY_STATUS				(UART_LSR_TEMT | UART_LSR_THRE)
 #define BYTES_TO_ALIGN(x)			((unsigned long)(x) & 0x3)
@@ -103,6 +102,7 @@ struct tegra_uart_port {
 	const struct tegra_uart_chip_data	*cdata;
 
 	struct clk				*uart_clk;
+	struct reset_control			*rst;
 	unsigned int				current_baud;
 
 	/* Register shadow */
@@ -120,7 +120,6 @@ struct tegra_uart_port {
 	bool					rx_timeout;
 	int					rx_in_progress;
 	int					symb_bit;
-	int					dma_req_sel;
 
 	struct dma_chan				*rx_dma_chan;
 	struct dma_chan				*tx_dma_chan;
@@ -832,9 +831,9 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	clk_prepare_enable(tup->uart_clk);
 
 	/* Reset the UART controller to clear all previous status.*/
-	tegra_periph_reset_assert(tup->uart_clk);
+	reset_control_assert(tup->rst);
 	udelay(10);
-	tegra_periph_reset_deassert(tup->uart_clk);
+	reset_control_deassert(tup->rst);
 
 	tup->rx_in_progress = 0;
 	tup->tx_in_progress = 0;
@@ -910,15 +909,14 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 	dma_addr_t dma_phys;
 	int ret;
 	struct dma_slave_config dma_sconfig;
-	dma_cap_mask_t mask;
 
-	dma_cap_zero(mask);
-	dma_cap_set(DMA_SLAVE, mask);
-	dma_chan = dma_request_channel(mask, NULL, NULL);
-	if (!dma_chan) {
+	dma_chan = dma_request_slave_channel_reason(tup->uport.dev,
+						dma_to_memory ? "rx" : "tx");
+	if (IS_ERR(dma_chan)) {
+		ret = PTR_ERR(dma_chan);
 		dev_err(tup->uport.dev,
-			"Dma channel is not available, will try later\n");
-		return -EPROBE_DEFER;
+			"DMA channel alloc failed: %d\n", ret);
+		return ret;
 	}
 
 	if (dma_to_memory) {
@@ -938,7 +936,6 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 		dma_buf = tup->uport.state->xmit.buf;
 	}
 
-	dma_sconfig.slave_id = tup->dma_req_sel;
 	if (dma_to_memory) {
 		dma_sconfig.src_addr = tup->uport.mapbase;
 		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
@@ -1222,17 +1219,8 @@ static int tegra_uart_parse_dt(struct platform_device *pdev,
 	struct tegra_uart_port *tup)
 {
 	struct device_node *np = pdev->dev.of_node;
-	u32 of_dma[2];
 	int port;
 
-	if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
-				of_dma, 2) >= 0) {
-		tup->dma_req_sel = of_dma[1];
-	} else {
-		dev_err(&pdev->dev, "missing dma requestor in device tree\n");
-		return -EINVAL;
-	}
-
 	port = of_alias_get_id(np, "serial");
 	if (port < 0) {
 		dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
@@ -1320,6 +1308,12 @@ static int tegra_uart_probe(struct platform_device *pdev)
 		return PTR_ERR(tup->uart_clk);
 	}
 
+	tup->rst = devm_reset_control_get(&pdev->dev, "serial");
+	if (IS_ERR(tup->rst)) {
+		dev_err(&pdev->dev, "Couldn't get the reset\n");
+		return PTR_ERR(tup->rst);
+	}
+
 	u->iotype = UPIO_MEM32;
 	u->irq = platform_get_irq(pdev, 0);
 	u->regshift = 2;
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 7d8103cd3e2..e4bf0e435af 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -23,35 +23,34 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/errno.h>
-#include <linux/sh_dma.h>
-#include <linux/timer.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/sysrq.h>
 #include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
 #include <linux/notifier.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/ctype.h>
-#include <linux/err.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
@@ -64,6 +63,10 @@ struct sci_port {
 
 	/* Platform configuration */
 	struct plat_sci_port	*cfg;
+	int			overrun_bit;
+	unsigned int		error_mask;
+	unsigned int		sampling_rate;
+
 
 	/* Break timer */
 	struct timer_list	break_timer;
@@ -74,8 +77,8 @@ struct sci_port {
 	/* Function clock */
 	struct clk		*fclk;
 
+	int			irqs[SCIx_NR_IRQS];
 	char			*irqstr[SCIx_NR_IRQS];
-	char			*gpiostr[SCIx_NR_FNS];
 
 	struct dma_chan			*chan_tx;
 	struct dma_chan			*chan_rx;
@@ -421,9 +424,9 @@ static void sci_port_enable(struct sci_port *sci_port)
 
 	pm_runtime_get_sync(sci_port->port.dev);
 
-	clk_enable(sci_port->iclk);
+	clk_prepare_enable(sci_port->iclk);
 	sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
-	clk_enable(sci_port->fclk);
+	clk_prepare_enable(sci_port->fclk);
 }
 
 static void sci_port_disable(struct sci_port *sci_port)
@@ -431,8 +434,16 @@ static void sci_port_disable(struct sci_port *sci_port)
 	if (!sci_port->port.dev)
 		return;
 
-	clk_disable(sci_port->fclk);
-	clk_disable(sci_port->iclk);
+	/* Cancel the break timer to ensure that the timer handler will not try
+	 * to access the hardware with clocks and power disabled. Reset the
+	 * break flag to make the break debouncing state machine ready for the
+	 * next break.
+	 */
+	del_timer_sync(&sci_port->break_timer);
+	sci_port->break_flag = 0;
+
+	clk_disable_unprepare(sci_port->fclk);
+	clk_disable_unprepare(sci_port->iclk);
 
 	pm_runtime_put_sync(sci_port->port.dev);
 }
@@ -557,7 +568,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return 1;
 
 	/* Cast for ARM damage */
-	return !!__raw_readb((void __iomem *)s->cfg->port_reg);
+	return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
 }
 
 /* ********************************************************************** *
@@ -733,8 +744,6 @@ static void sci_break_timer(unsigned long data)
 {
 	struct sci_port *port = (struct sci_port *)data;
 
-	sci_port_enable(port);
-
 	if (sci_rxd_in(&port->port) == 0) {
 		port->break_flag = 1;
 		sci_schedule_break_timer(port);
@@ -744,8 +753,6 @@ static void sci_break_timer(unsigned long data)
 		sci_schedule_break_timer(port);
 	} else
 		port->break_flag = 0;
-
-	sci_port_disable(port);
 }
 
 static int sci_handle_errors(struct uart_port *port)
@@ -755,19 +762,15 @@ static int sci_handle_errors(struct uart_port *port)
 	struct tty_port *tport = &port->state->port;
 	struct sci_port *s = to_sci_port(port);
 
-	/*
-	 * Handle overruns, if supported.
-	 */
-	if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) {
-		if (status & (1 << s->cfg->overrun_bit)) {
-			port->icount.overrun++;
+	/* Handle overruns */
+	if (status & (1 << s->overrun_bit)) {
+		port->icount.overrun++;
 
-			/* overrun error */
-			if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
-				copied++;
+		/* overrun error */
+		if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
+			copied++;
 
-			dev_notice(port->dev, "overrun error");
-		}
+		dev_notice(port->dev, "overrun error");
 	}
 
 	if (status & SCxSR_FER(port)) {
@@ -829,7 +832,7 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 	if (!reg->size)
 		return 0;
 
-	if ((serial_port_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) {
+	if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) {
 		serial_port_out(port, SCLSR, 0);
 
 		port->icount.overrun++;
@@ -1075,19 +1078,19 @@ static int sci_request_irq(struct sci_port *port)
 
 	for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
 		struct sci_irq_desc *desc;
-		unsigned int irq;
+		int irq;
 
 		if (SCIx_IRQ_IS_MUXED(port)) {
 			i = SCIx_MUX_IRQ;
 			irq = up->irq;
 		} else {
-			irq = port->cfg->irqs[i];
+			irq = port->irqs[i];
 
 			/*
 			 * Certain port types won't support all of the
 			 * available interrupt sources.
 			 */
-			if (unlikely(!irq))
+			if (unlikely(irq < 0))
 				continue;
 		}
 
@@ -1112,7 +1115,7 @@ static int sci_request_irq(struct sci_port *port)
 
 out_noirq:
 	while (--i >= 0)
-		free_irq(port->cfg->irqs[i], port);
+		free_irq(port->irqs[i], port);
 
 out_nomem:
 	while (--j >= 0)
@@ -1130,16 +1133,16 @@ static void sci_free_irq(struct sci_port *port)
 	 * IRQ first.
 	 */
 	for (i = 0; i < SCIx_NR_IRQS; i++) {
-		unsigned int irq = port->cfg->irqs[i];
+		int irq = port->irqs[i];
 
 		/*
 		 * Certain port types won't support all of the available
 		 * interrupt sources.
 		 */
-		if (unlikely(!irq))
+		if (unlikely(irq < 0))
 			continue;
 
-		free_irq(port->cfg->irqs[i], port);
+		free_irq(port->irqs[i], port);
 		kfree(port->irqstr[i]);
 
 		if (SCIx_IRQ_IS_MUXED(port)) {
@@ -1149,67 +1152,6 @@ static void sci_free_irq(struct sci_port *port)
 	}
 }
 
-static const char *sci_gpio_names[SCIx_NR_FNS] = {
-	"sck", "rxd", "txd", "cts", "rts",
-};
-
-static const char *sci_gpio_str(unsigned int index)
-{
-	return sci_gpio_names[index];
-}
-
-static void sci_init_gpios(struct sci_port *port)
-{
-	struct uart_port *up = &port->port;
-	int i;
-
-	if (!port->cfg)
-		return;
-
-	for (i = 0; i < SCIx_NR_FNS; i++) {
-		const char *desc;
-		int ret;
-
-		if (!port->cfg->gpios[i])
-			continue;
-
-		desc = sci_gpio_str(i);
-
-		port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s",
-					     dev_name(up->dev), desc);
-
-		/*
-		 * If we've failed the allocation, we can still continue
-		 * on with a NULL string.
-		 */
-		if (!port->gpiostr[i])
-			dev_notice(up->dev, "%s string allocation failure\n",
-				   desc);
-
-		ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]);
-		if (unlikely(ret != 0)) {
-			dev_notice(up->dev, "failed %s gpio request\n", desc);
-
-			/*
-			 * If we can't get the GPIO for whatever reason,
-			 * no point in keeping the verbose string around.
-			 */
-			kfree(port->gpiostr[i]);
-		}
-	}
-}
-
-static void sci_free_gpios(struct sci_port *port)
-{
-	int i;
-
-	for (i = 0; i < SCIx_NR_FNS; i++)
-		if (port->cfg->gpios[i]) {
-			gpio_free(port->cfg->gpios[i]);
-			kfree(port->gpiostr[i]);
-		}
-}
-
 static unsigned int sci_tx_empty(struct uart_port *port)
 {
 	unsigned short status = serial_port_in(port, SCxSR);
@@ -1309,7 +1251,7 @@ static int sci_dma_rx_push(struct sci_port *s, size_t count)
 	}
 
 	if (room < count)
-		dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+		dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
 			 count - room);
 	if (!room)
 		return room;
@@ -1442,7 +1384,7 @@ static void work_fn_rx(struct work_struct *work)
 		int count;
 
 		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
-		dev_dbg(port->dev, "Read %u bytes with cookie %d\n",
+		dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
 			sh_desc->partial, sh_desc->cookie);
 
 		spin_lock_irqsave(&port->lock, flags);
@@ -1655,7 +1597,7 @@ static void rx_timer_fn(unsigned long arg)
 
 	if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
 		scr &= ~0x4000;
-		enable_irq(s->cfg->irqs[1]);
+		enable_irq(s->irqs[SCIx_RXI_IRQ]);
 	}
 	serial_port_out(port, SCSCR, scr | SCSCR_RIE);
 	dev_dbg(port->dev, "DMA Rx timed out\n");
@@ -1691,16 +1633,17 @@ static void sci_request_dma(struct uart_port *port)
 		s->chan_tx = chan;
 		sg_init_table(&s->sg_tx, 1);
 		/* UART circular tx buffer is an aligned page. */
-		BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
+		BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
 		sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
-			    UART_XMIT_SIZE, (int)port->state->xmit.buf & ~PAGE_MASK);
+			    UART_XMIT_SIZE,
+			    (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
 		nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
 		if (!nent)
 			sci_tx_dma_release(s, false);
 		else
-			dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
-				sg_dma_len(&s->sg_tx),
-				port->state->xmit.buf, sg_dma_address(&s->sg_tx));
+			dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
+				sg_dma_len(&s->sg_tx), port->state->xmit.buf,
+				&sg_dma_address(&s->sg_tx));
 
 		s->sg_len_tx = nent;
 
@@ -1740,7 +1683,7 @@ static void sci_request_dma(struct uart_port *port)
 
 			sg_init_table(sg, 1);
 			sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
-				    (int)buf[i] & ~PAGE_MASK);
+				    (uintptr_t)buf[i] & ~PAGE_MASK);
 			sg_dma_address(sg) = dma[i];
 		}
 
@@ -1808,20 +1751,21 @@ static void sci_shutdown(struct uart_port *port)
 	sci_free_irq(s);
 }
 
-static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
+static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
 				   unsigned long freq)
 {
-	switch (algo_id) {
+	if (s->sampling_rate)
+		return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1;
+
+	switch (s->cfg->scbrr_algo_id) {
 	case SCBRR_ALGO_1:
-		return ((freq + 16 * bps) / (16 * bps) - 1);
+		return freq / (16 * bps);
 	case SCBRR_ALGO_2:
-		return ((freq + 16 * bps) / (32 * bps) - 1);
+		return DIV_ROUND_CLOSEST(freq, 32 * bps) - 1;
 	case SCBRR_ALGO_3:
-		return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
+		return freq / (8 * bps);
 	case SCBRR_ALGO_4:
-		return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
-	case SCBRR_ALGO_5:
-		return (((freq * 1000 / 32) / bps) - 1);
+		return DIV_ROUND_CLOSEST(freq, 16 * bps) - 1;
 	}
 
 	/* Warn, but use a safe default */
@@ -1903,12 +1847,11 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
 	if (likely(baud && port->uartclk)) {
-		if (s->cfg->scbrr_algo_id == SCBRR_ALGO_6) {
+		if (s->cfg->type == PORT_HSCIF) {
 			sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
 					    &cks);
 		} else {
-			t = sci_scbrr_calc(s->cfg->scbrr_algo_id, baud,
-					   port->uartclk);
+			t = sci_scbrr_calc(s, baud, port->uartclk);
 			for (cks = 0; t >= 256 && cks <= 3; cks++)
 				t >>= 2;
 		}
@@ -2115,10 +2058,6 @@ static void sci_config_port(struct uart_port *port, int flags)
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	struct sci_port *s = to_sci_port(port);
-
-	if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
-		return -EINVAL;
 	if (ser->baud_base < 2400)
 		/* No paper tape reader for Mitch.. */
 		return -EINVAL;
@@ -2151,11 +2090,13 @@ static struct uart_ops sci_uart_ops = {
 };
 
 static int sci_init_single(struct platform_device *dev,
-				     struct sci_port *sci_port,
-				     unsigned int index,
-				     struct plat_sci_port *p)
+			   struct sci_port *sci_port, unsigned int index,
+			   struct plat_sci_port *p, bool early)
 {
 	struct uart_port *port = &sci_port->port;
+	const struct resource *res;
+	unsigned int sampling_rate;
+	unsigned int i;
 	int ret;
 
 	sci_port->cfg	= p;
@@ -2164,31 +2105,90 @@ static int sci_init_single(struct platform_device *dev,
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
 
+	if (dev->num_resources) {
+		/* Device has resources, use them. */
+		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+		if (res == NULL)
+			return -ENOMEM;
+
+		port->mapbase = res->start;
+
+		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+			sci_port->irqs[i] = platform_get_irq(dev, i);
+
+		/* The SCI generates several interrupts. They can be muxed
+		 * together or connected to different interrupt lines. In the
+		 * muxed case only one interrupt resource is specified. In the
+		 * non-muxed case three or four interrupt resources are
+		 * specified, as the BRI interrupt is optional.
+		 */
+		if (sci_port->irqs[0] < 0)
+			return -ENXIO;
+
+		if (sci_port->irqs[1] < 0) {
+			sci_port->irqs[1] = sci_port->irqs[0];
+			sci_port->irqs[2] = sci_port->irqs[0];
+			sci_port->irqs[3] = sci_port->irqs[0];
+		}
+	} else {
+		/* No resources, use old-style platform data. */
+		port->mapbase = p->mapbase;
+		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+			sci_port->irqs[i] = p->irqs[i] ? p->irqs[i] : -ENXIO;
+	}
+
+	if (p->regtype == SCIx_PROBE_REGTYPE) {
+		ret = sci_probe_regmap(p);
+		if (unlikely(ret))
+			return ret;
+	}
+
 	switch (p->type) {
 	case PORT_SCIFB:
 		port->fifosize = 256;
+		sci_port->overrun_bit = 9;
+		sampling_rate = 16;
 		break;
 	case PORT_HSCIF:
 		port->fifosize = 128;
+		sampling_rate = 0;
+		sci_port->overrun_bit = 0;
 		break;
 	case PORT_SCIFA:
 		port->fifosize = 64;
+		sci_port->overrun_bit = 9;
+		sampling_rate = 16;
 		break;
 	case PORT_SCIF:
 		port->fifosize = 16;
+		if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
+			sci_port->overrun_bit = 9;
+			sampling_rate = 16;
+		} else {
+			sci_port->overrun_bit = 0;
+			sampling_rate = 32;
+		}
 		break;
 	default:
 		port->fifosize = 1;
+		sci_port->overrun_bit = 5;
+		sampling_rate = 32;
 		break;
 	}
 
-	if (p->regtype == SCIx_PROBE_REGTYPE) {
-		ret = sci_probe_regmap(p);
-		if (unlikely(ret))
-			return ret;
+	/* Set the sampling rate if the baud rate calculation algorithm isn't
+	 * specified.
+	 */
+	if (p->scbrr_algo_id == SCBRR_ALGO_NONE) {
+		/* SCIFA on sh7723 and sh7724 need a custom sampling rate that
+		 * doesn't match the SoC datasheet, this should be investigated.
+		 * Let platform data override the sampling rate for now.
+		 */
+		sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
+					: sampling_rate;
 	}
 
-	if (dev) {
+	if (!early) {
 		sci_port->iclk = clk_get(&dev->dev, "sci_ick");
 		if (IS_ERR(sci_port->iclk)) {
 			sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
@@ -2208,8 +2208,6 @@ static int sci_init_single(struct platform_device *dev,
 
 		port->dev = &dev->dev;
 
-		sci_init_gpios(sci_port);
-
 		pm_runtime_enable(&dev->dev);
 	}
 
@@ -2220,32 +2218,22 @@ static int sci_init_single(struct platform_device *dev,
 	/*
 	 * Establish some sensible defaults for the error detection.
 	 */
-	if (!p->error_mask)
-		p->error_mask = (p->type == PORT_SCI) ?
+	sci_port->error_mask = (p->type == PORT_SCI) ?
 			SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
 
 	/*
 	 * Establish sensible defaults for the overrun detection, unless
 	 * the part has explicitly disabled support for it.
 	 */
-	if (p->overrun_bit != SCIx_NOT_SUPPORTED) {
-		if (p->type == PORT_SCI)
-			p->overrun_bit = 5;
-		else if (p->scbrr_algo_id == SCBRR_ALGO_4)
-			p->overrun_bit = 9;
-		else
-			p->overrun_bit = 0;
 
-		/*
-		 * Make the error mask inclusive of overrun detection, if
-		 * supported.
-		 */
-		p->error_mask |= (1 << p->overrun_bit);
-	}
+	/*
+	 * Make the error mask inclusive of overrun detection, if
+	 * supported.
+	 */
+	sci_port->error_mask |= 1 << sci_port->overrun_bit;
 
-	port->mapbase		= p->mapbase;
 	port->type		= p->type;
-	port->flags		= p->flags;
+	port->flags		= UPF_FIXED_PORT | p->flags;
 	port->regshift		= p->regshift;
 
 	/*
@@ -2255,7 +2243,7 @@ static int sci_init_single(struct platform_device *dev,
 	 *
 	 * For the muxed case there's nothing more to do.
 	 */
-	port->irq		= p->irqs[SCIx_RXI_IRQ];
+	port->irq		= sci_port->irqs[SCIx_RXI_IRQ];
 	port->irqflags		= 0;
 
 	port->serial_in		= sci_serial_in;
@@ -2270,8 +2258,6 @@ static int sci_init_single(struct platform_device *dev,
 
 static void sci_cleanup_single(struct sci_port *port)
 {
-	sci_free_gpios(port);
-
 	clk_put(port->iclk);
 	clk_put(port->fclk);
 
@@ -2387,7 +2373,7 @@ static int sci_probe_earlyprintk(struct platform_device *pdev)
 
 	early_serial_console.index = pdev->id;
 
-	sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg);
+	sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
 
 	serial_console_setup(&early_serial_console, early_serial_buf);
 
@@ -2454,7 +2440,7 @@ static int sci_probe_single(struct platform_device *dev,
 		return -EINVAL;
 	}
 
-	ret = sci_init_single(dev, sciport, index, p);
+	ret = sci_init_single(dev, sciport, index, p, false);
 	if (ret)
 		return ret;
 
diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h
index 5aca7364634..d5db81a0a43 100644
--- a/drivers/tty/serial/sh-sci.h
+++ b/drivers/tty/serial/sh-sci.h
@@ -9,7 +9,7 @@
 #define SCxSR_PER(port)		(((port)->type == PORT_SCI) ? SCI_PER    : SCIF_PER)
 #define SCxSR_BRK(port)		(((port)->type == PORT_SCI) ? 0x00       : SCIF_BRK)
 
-#define SCxSR_ERRORS(port)	(to_sci_port(port)->cfg->error_mask)
+#define SCxSR_ERRORS(port)	(to_sci_port(port)->error_mask)
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \