Staging: remove at76_usb wireless driver.

There is already an in-kernel driver for this hardware (since 2.6.30),
at76c50x-usb, and it supports all of the same devices.  So this driver
can now be deleted.

Acked-by: Kalle Valo <kalle.valo@iki.fi> 
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 files changed, 0 insertions, 6291 deletions

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index f7f9051a00e..66188a5bf44 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -57,8 +57,6 @@ source "drivers/staging/wlan-ng/Kconfig"
 
 source "drivers/staging/echo/Kconfig"
 
-source "drivers/staging/at76_usb/Kconfig"
-
 source "drivers/staging/poch/Kconfig"
 
 source "drivers/staging/agnx/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 3b388edd4f7..3c64d5fad65 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
 obj-$(CONFIG_PRISM2_USB)	+= wlan-ng/
 obj-$(CONFIG_ECHO)		+= echo/
-obj-$(CONFIG_USB_ATMEL)		+= at76_usb/
 obj-$(CONFIG_POCH)		+= poch/
 obj-$(CONFIG_AGNX)		+= agnx/
 obj-$(CONFIG_OTUS)		+= otus/
diff --git a/drivers/staging/at76_usb/Kconfig b/drivers/staging/at76_usb/Kconfig
deleted file mode 100644
index 8606f962162..00000000000
--- a/drivers/staging/at76_usb/Kconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-config USB_ATMEL
-	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
-	depends on WLAN_80211 && USB
-	default N
-	select FW_LOADER
-	---help---
-	  Enable support for USB Wireless devices using Atmel at76c503,
-	  at76c505 or at76c505a chips.
diff --git a/drivers/staging/at76_usb/Makefile b/drivers/staging/at76_usb/Makefile
deleted file mode 100644
index 6a47e887230..00000000000
--- a/drivers/staging/at76_usb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_ATMEL)		+= at76_usb.o
diff --git a/drivers/staging/at76_usb/TODO b/drivers/staging/at76_usb/TODO
deleted file mode 100644
index 0c7ed21c3b9..00000000000
--- a/drivers/staging/at76_usb/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-Fix the mac80211 port of at76_usb (the proper in-kernel wireless
-stack) and get it included to the mainline. Patches available here:
-
-http://git.kernel.org/?p=linux/kernel/git/linville/wireless-legacy.git;a=shortlog;h=at76
-
-Contact Kalle Valo <kalle.valo@iki.fi> and linux-wireless list
-<linux-wireless@vger.kernel.org> for more information.
diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c
deleted file mode 100644
index 4db9b976da9..00000000000
--- a/drivers/staging/at76_usb/at76_usb.c
+++ /dev/null
@@ -1,5566 +0,0 @@
-/*
- * at76c503/at76c505 USB driver
- *
- * Copyright (c) 2002 - 2003 Oliver Kurth
- * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
- * Copyright (c) 2004 Nick Jones
- * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
- * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This file is part of the Berlios driver for WLAN USB devices based on the
- * Atmel AT76C503A/505/505A.
- *
- * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/etherdevice.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-#include <net/ieee80211_radiotap.h>
-#include <linux/firmware.h>
-#include <linux/leds.h>
-#include <linux/ieee80211.h>
-
-#include "at76_usb.h"
-
-/* Version information */
-#define DRIVER_NAME "at76_usb"
-#define DRIVER_VERSION	"0.17"
-#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"
-
-/* at76_debug bits */
-#define DBG_PROGRESS		0x00000001	/* authentication/accociation */
-#define DBG_BSS_TABLE		0x00000002	/* show BSS table after scans */
-#define DBG_IOCTL		0x00000004	/* ioctl calls / settings */
-#define DBG_MAC_STATE		0x00000008	/* MAC state transitions */
-#define DBG_TX_DATA		0x00000010	/* tx header */
-#define DBG_TX_DATA_CONTENT	0x00000020	/* tx content */
-#define DBG_TX_MGMT		0x00000040	/* tx management */
-#define DBG_RX_DATA		0x00000080	/* rx data header */
-#define DBG_RX_DATA_CONTENT	0x00000100	/* rx data content */
-#define DBG_RX_MGMT		0x00000200	/* rx mgmt frame headers */
-#define DBG_RX_BEACON		0x00000400	/* rx beacon */
-#define DBG_RX_CTRL		0x00000800	/* rx control */
-#define DBG_RX_MGMT_CONTENT	0x00001000	/* rx mgmt content */
-#define DBG_RX_FRAGS		0x00002000	/* rx data fragment handling */
-#define DBG_DEVSTART		0x00004000	/* fw download, device start */
-#define DBG_URB			0x00008000	/* rx urb status, ... */
-#define DBG_RX_ATMEL_HDR	0x00010000	/* Atmel-specific Rx headers */
-#define DBG_PROC_ENTRY		0x00020000	/* procedure entries/exits */
-#define DBG_PM			0x00040000	/* power management settings */
-#define DBG_BSS_MATCH		0x00080000	/* BSS match failures */
-#define DBG_PARAMS		0x00100000	/* show configured parameters */
-#define DBG_WAIT_COMPLETE	0x00200000	/* command completion */
-#define DBG_RX_FRAGS_SKB	0x00400000	/* skb header of Rx fragments */
-#define DBG_BSS_TABLE_RM	0x00800000	/* purging bss table entries */
-#define DBG_MONITOR_MODE	0x01000000	/* monitor mode */
-#define DBG_MIB			0x02000000	/* dump all MIBs on startup */
-#define DBG_MGMT_TIMER		0x04000000	/* dump mgmt_timer ops */
-#define DBG_WE_EVENTS		0x08000000	/* dump wireless events */
-#define DBG_FW			0x10000000	/* firmware download */
-#define DBG_DFU			0x20000000	/* device firmware upgrade */
-
-#define DBG_DEFAULTS		0
-
-/* Use our own dbg macro */
-#define at76_dbg(bits, format, arg...) \
-	do { \
-		if (at76_debug & (bits)) \
-		printk(KERN_DEBUG DRIVER_NAME ": " format "\n" , ## arg); \
-	} while (0)
-
-static int at76_debug = DBG_DEFAULTS;
-
-/* Protect against concurrent firmware loading and parsing */
-static struct mutex fw_mutex;
-
-static struct fwentry firmwares[] = {
-	[0] = {""},
-	[BOARD_503_ISL3861] = {"atmel_at76c503-i3861.bin"},
-	[BOARD_503_ISL3863] = {"atmel_at76c503-i3863.bin"},
-	[BOARD_503] = {"atmel_at76c503-rfmd.bin"},
-	[BOARD_503_ACC] = {"atmel_at76c503-rfmd-acc.bin"},
-	[BOARD_505] = {"atmel_at76c505-rfmd.bin"},
-	[BOARD_505_2958] = {"atmel_at76c505-rfmd2958.bin"},
-	[BOARD_505A] = {"atmel_at76c505a-rfmd2958.bin"},
-	[BOARD_505AMX] = {"atmel_at76c505amx-rfmd.bin"},
-};
-
-#define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
-
-static struct usb_device_id dev_table[] = {
-	/*
-	 * at76c503-i3861
-	 */
-	/* Generic AT76C503/3861 device */
-	{USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Linksys WUSB11 v2.1/v2.6 */
-	{USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Netgear MA101 rev. A */
-	{USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Tekram U300C / Allnet ALL0193 */
-	{USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* HP HN210W J7801A */
-	{USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Sitecom/Z-Com/Zyxel M4Y-750 */
-	{USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Dynalink/Askey WLL013 (intersil) */
-	{USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */
-	{USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* BenQ AWL300 */
-	{USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Addtron AWU-120, Compex WLU11 */
-	{USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Intel AP310 AnyPoint II USB */
-	{USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Dynalink L11U */
-	{USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* Arescom WL-210, FCC id 07J-GL2411USB */
-	{USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* I-O DATA WN-B11/USB */
-	{USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/* BT Voyager 1010 */
-	{USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861)},
-	/*
-	 * at76c503-i3863
-	 */
-	/* Generic AT76C503/3863 device */
-	{USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863)},
-	/* Samsung SWL-2100U */
-	{USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863)},
-	/*
-	 * at76c503-rfmd
-	 */
-	/* Generic AT76C503/RFMD device */
-	{USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503)},
-	/* Dynalink/Askey WLL013 (rfmd) */
-	{USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503)},
-	/* Linksys WUSB11 v2.6 */
-	{USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503)},
-	/* Network Everywhere NWU11B */
-	{USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503)},
-	/* Netgear MA101 rev. B */
-	{USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503)},
-	/* D-Link DWL-120 rev. E */
-	{USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503)},
-	/* Actiontec 802UAT1, HWU01150-01UK */
-	{USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503)},
-	/* AirVast W-Buddie WN210 */
-	{USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503)},
-	/* Dick Smith Electronics XH1153 802.11b USB adapter */
-	{USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503)},
-	/* CNet CNUSB611 */
-	{USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503)},
-	/* FiberLine FL-WL200U */
-	{USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503)},
-	/* BenQ AWL400 USB stick */
-	{USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503)},
-	/* 3Com 3CRSHEW696 */
-	{USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503)},
-	/* Siemens Santis ADSL WLAN USB adapter WLL 013 */
-	{USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503)},
-	/* Belkin F5D6050, version 2 */
-	{USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503)},
-	/* iBlitzz, BWU613 (not *B or *SB) */
-	{USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503)},
-	/* Gigabyte GN-WLBM101 */
-	{USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503)},
-	/* Planex GW-US11S */
-	{USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503)},
-	/* Internal WLAN adapter in h5[4,5]xx series iPAQs */
-	{USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503)},
-	/* Corega Wireless LAN USB-11 mini */
-	{USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503)},
-	/* Corega Wireless LAN USB-11 mini2 */
-	{USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503)},
-	/* Uniden PCW100 */
-	{USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503)},
-	/*
-	 * at76c503-rfmd-acc
-	 */
-	/* SMC2664W */
-	{USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC)},
-	/* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
-	{USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC)},
-	/*
-	 * at76c505-rfmd
-	 */
-	/* Generic AT76C505/RFMD */
-	{USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505)},
-	/*
-	 * at76c505-rfmd2958
-	 */
-	/* Generic AT76C505/RFMD, OvisLink WL-1130USB */
-	{USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Fiberline FL-WL240U */
-	{USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* CNet CNUSB-611G */
-	{USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Linksys WUSB11 v2.8 */
-	{USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
-	{USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Corega WLAN USB Stick 11 */
-	{USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958)},
-	/* Microstar MSI Box MS6978 */
-	{USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958)},
-	/*
-	 * at76c505a-rfmd2958
-	 */
-	/* Generic AT76C505A device */
-	{USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A)},
-	/* Generic AT76C505AS device */
-	{USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A)},
-	/* Siemens Gigaset USB WLAN Adapter 11 */
-	{USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A)},
-	/* OQO Model 01+ Internal Wi-Fi */
-	{USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A)},
-	/*
-	 * at76c505amx-rfmd
-	 */
-	/* Generic AT76C505AMX device */
-	{USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, dev_table);
-
-/* Supported rates of this hardware, bit 7 marks basic rates */
-static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };
-
-/* Frequency of each channel in MHz */
-static const long channel_frequency[] = {
-	2412, 2417, 2422, 2427, 2432, 2437, 2442,
-	2447, 2452, 2457, 2462, 2467, 2472, 2484
-};
-
-#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
-
-static const char *const preambles[] = { "long", "short", "auto" };
-
-static const char *const mac_states[] = {
-	[MAC_INIT] = "INIT",
-	[MAC_SCANNING] = "SCANNING",
-	[MAC_AUTH] = "AUTH",
-	[MAC_ASSOC] = "ASSOC",
-	[MAC_JOINING] = "JOINING",
-	[MAC_CONNECTED] = "CONNECTED",
-	[MAC_OWN_IBSS] = "OWN_IBSS"
-};
-
-/* Firmware download */
-/* DFU states */
-#define STATE_IDLE			0x00
-#define STATE_DETACH			0x01
-#define STATE_DFU_IDLE			0x02
-#define STATE_DFU_DOWNLOAD_SYNC		0x03
-#define STATE_DFU_DOWNLOAD_BUSY		0x04
-#define STATE_DFU_DOWNLOAD_IDLE		0x05
-#define STATE_DFU_MANIFEST_SYNC		0x06
-#define STATE_DFU_MANIFEST		0x07
-#define STATE_DFU_MANIFEST_WAIT_RESET	0x08
-#define STATE_DFU_UPLOAD_IDLE		0x09
-#define STATE_DFU_ERROR			0x0a
-
-/* DFU commands */
-#define DFU_DETACH			0
-#define DFU_DNLOAD			1
-#define DFU_UPLOAD			2
-#define DFU_GETSTATUS			3
-#define DFU_CLRSTATUS			4
-#define DFU_GETSTATE			5
-#define DFU_ABORT			6
-
-#define FW_BLOCK_SIZE 1024
-
-struct dfu_status {
-	unsigned char status;
-	unsigned char poll_timeout[3];
-	unsigned char state;
-	unsigned char string;
-} __attribute__((packed));
-
-static inline int at76_is_intersil(enum board_type board)
-{
-	return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
-}
-
-static inline int at76_is_503rfmd(enum board_type board)
-{
-	return (board == BOARD_503 || board == BOARD_503_ACC);
-}
-
-static inline int at76_is_505a(enum board_type board)
-{
-	return (board == BOARD_505A || board == BOARD_505AMX);
-}
-
-/* Load a block of the first (internal) part of the firmware */
-static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
-				  void *block, int size)
-{
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
-			       USB_TYPE_CLASS | USB_DIR_OUT |
-			       USB_RECIP_INTERFACE, blockno, 0, block, size,
-			       USB_CTRL_GET_TIMEOUT);
-}
-
-static int at76_dfu_get_status(struct usb_device *udev,
-			       struct dfu_status *status)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
-			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
-			      0, 0, status, sizeof(struct dfu_status),
-			      USB_CTRL_GET_TIMEOUT);
-	return ret;
-}
-
-static u8 at76_dfu_get_state(struct usb_device *udev, u8 *state)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
-			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
-			      0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
-	return ret;
-}
-
-/* Convert timeout from the DFU status to jiffies */
-static inline unsigned long at76_get_timeout(struct dfu_status *s)
-{
-	return msecs_to_jiffies((s->poll_timeout[2] << 16)
-				| (s->poll_timeout[1] << 8)
-				| (s->poll_timeout[0]));
-}
-
-/* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
- * its value in jiffies in the MANIFEST_SYNC state.  */
-static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
-				int manifest_sync_timeout)
-{
-	u8 *block;
-	struct dfu_status dfu_stat_buf;
-	int ret = 0;
-	int need_dfu_state = 1;
-	int is_done = 0;
-	u8 dfu_state = 0;
-	u32 dfu_timeout = 0;
-	int bsize = 0;
-	int blockno = 0;
-
-	at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
-		 manifest_sync_timeout);
-
-	if (!size) {
-		dev_printk(KERN_ERR, &udev->dev, "FW buffer length invalid!\n");
-		return -EINVAL;
-	}
-
-	block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
-	if (!block)
-		return -ENOMEM;
-
-	do {
-		if (need_dfu_state) {
-			ret = at76_dfu_get_state(udev, &dfu_state);
-			if (ret < 0) {
-				dev_printk(KERN_ERR, &udev->dev,
-					   "cannot get DFU state: %d\n", ret);
-				goto exit;
-			}
-			need_dfu_state = 0;
-		}
-
-		switch (dfu_state) {
-		case STATE_DFU_DOWNLOAD_SYNC:
-			at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
-			ret = at76_dfu_get_status(udev, &dfu_stat_buf);
-			if (ret >= 0) {
-				dfu_state = dfu_stat_buf.state;
-				dfu_timeout = at76_get_timeout(&dfu_stat_buf);
-				need_dfu_state = 0;
-			} else
-				dev_printk(KERN_ERR, &udev->dev,
-					   "at76_dfu_get_status returned %d\n",
-					   ret);
-			break;
-
-		case STATE_DFU_DOWNLOAD_BUSY:
-			at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
-			need_dfu_state = 1;
-
-			at76_dbg(DBG_DFU, "DFU: Resetting device");
-			schedule_timeout_interruptible(dfu_timeout);
-			break;
-
-		case STATE_DFU_DOWNLOAD_IDLE:
-			at76_dbg(DBG_DFU, "DOWNLOAD...");
-			/* fall through */
-		case STATE_DFU_IDLE:
-			at76_dbg(DBG_DFU, "DFU IDLE");
-
-			bsize = min_t(int, size, FW_BLOCK_SIZE);
-			memcpy(block, buf, bsize);
-			at76_dbg(DBG_DFU, "int fw, size left = %5d, "
-				 "bsize = %4d, blockno = %2d", size, bsize,
-				 blockno);
-			ret =
-			    at76_load_int_fw_block(udev, blockno, block, bsize);
-			buf += bsize;
-			size -= bsize;
-			blockno++;
-
-			if (ret != bsize)
-				dev_printk(KERN_ERR, &udev->dev,
-					   "at76_load_int_fw_block "
-					   "returned %d\n", ret);
-			need_dfu_state = 1;
-			break;
-
-		case STATE_DFU_MANIFEST_SYNC:
-			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");
-
-			ret = at76_dfu_get_status(udev, &dfu_stat_buf);
-			if (ret < 0)
-				break;
-
-			dfu_state = dfu_stat_buf.state;
-			dfu_timeout = at76_get_timeout(&dfu_stat_buf);
-			need_dfu_state = 0;
-
-			/* override the timeout from the status response,
-			   needed for AT76C505A */
-			if (manifest_sync_timeout > 0)
-				dfu_timeout = manifest_sync_timeout;
-
-			at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
-			schedule_timeout_interruptible(dfu_timeout);
-			break;
-
-		case STATE_DFU_MANIFEST:
-			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
-			is_done = 1;
-			break;
-
-		case STATE_DFU_MANIFEST_WAIT_RESET:
-			at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
-			is_done = 1;
-			break;
-
-		case STATE_DFU_UPLOAD_IDLE:
-			at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
-			break;
-
-		case STATE_DFU_ERROR:
-			at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
-			ret = -EPIPE;
-			break;
-
-		default:
-			at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", dfu_state);
-			ret = -EINVAL;
-			break;
-		}
-	} while (!is_done && (ret >= 0));
-
-exit:
-	kfree(block);
-	if (ret >= 0)
-		ret = 0;
-
-	return ret;
-}
-
-/* Report that the scan results are ready */
-static inline void at76_iwevent_scan_complete(struct net_device *netdev)
-{
-	union iwreq_data wrqu;
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	wireless_send_event(netdev, SIOCGIWSCAN, &wrqu, NULL);
-	at76_dbg(DBG_WE_EVENTS, "%s: SIOCGIWSCAN sent", netdev->name);
-}
-
-static inline void at76_iwevent_bss_connect(struct net_device *netdev,
-					    u8 *bssid)
-{
-	union iwreq_data wrqu;
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
-	at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
-		 __func__);
-}
-
-static inline void at76_iwevent_bss_disconnect(struct net_device *netdev)
-{
-	union iwreq_data wrqu;
-	wrqu.data.length = 0;
-	wrqu.data.flags = 0;
-	memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(netdev, SIOCGIWAP, &wrqu, NULL);
-	at76_dbg(DBG_WE_EVENTS, "%s: %s: SIOCGIWAP sent", netdev->name,
-		 __func__);
-}
-
-#define HEX2STR_BUFFERS 4
-#define HEX2STR_MAX_LEN 64
-#define BIN2HEX(x) ((x) < 10 ? '0' + (x) : (x) + 'A' - 10)
-
-/* Convert binary data into hex string */
-static char *hex2str(void *buf, int len)
-{
-	static atomic_t a = ATOMIC_INIT(0);
-	static char bufs[HEX2STR_BUFFERS][3 * HEX2STR_MAX_LEN + 1];
-	char *ret = bufs[atomic_inc_return(&a) & (HEX2STR_BUFFERS - 1)];
-	char *obuf = ret;
-	u8 *ibuf = buf;
-
-	if (len > HEX2STR_MAX_LEN)
-		len = HEX2STR_MAX_LEN;
-
-	if (len <= 0) {
-		ret[0] = '\0';
-		return ret;
-	}
-
-	while (len--) {
-		*obuf++ = BIN2HEX(*ibuf >> 4);
-		*obuf++ = BIN2HEX(*ibuf & 0xf);
-		*obuf++ = '-';
-		ibuf++;
-	}
-	*(--obuf) = '\0';
-
-	return ret;
-}
-
-/* LED trigger */
-static int tx_activity;
-static void at76_ledtrig_tx_timerfunc(unsigned long data);
-static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc, 0, 0);
-DEFINE_LED_TRIGGER(ledtrig_tx);
-
-static void at76_ledtrig_tx_timerfunc(unsigned long data)
-{
-	static int tx_lastactivity;
-
-	if (tx_lastactivity != tx_activity) {
-		tx_lastactivity = tx_activity;
-		led_trigger_event(ledtrig_tx, LED_FULL);
-		mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
-	} else
-		led_trigger_event(ledtrig_tx, LED_OFF);
-}
-
-static void at76_ledtrig_tx_activity(void)
-{
-	tx_activity++;
-	if (!timer_pending(&ledtrig_tx_timer))
-		mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
-}
-
-/* Check if the given ssid is hidden */
-static inline int at76_is_hidden_ssid(u8 *ssid, int length)
-{
-	static const u8 zeros[32];
-
-	if (length == 0)
-		return 1;
-
-	if (length == 1 && ssid[0] == ' ')
-		return 1;
-
-	return (memcmp(ssid, zeros, length) == 0);
-}
-
-static inline void at76_free_bss_list(struct at76_priv *priv)
-{
-	struct list_head *next, *ptr;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->bss_list_spinlock, flags);
-
-	priv->curr_bss = NULL;
-
-	list_for_each_safe(ptr, next, &priv->bss_list) {
-		list_del(ptr);
-		kfree(list_entry(ptr, struct bss_info, list));
-	}
-
-	spin_unlock_irqrestore(&priv->bss_list_spinlock, flags);
-}
-
-static int at76_remap(struct usb_device *udev)
-{
-	int ret;
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
-			      USB_TYPE_VENDOR | USB_DIR_OUT |
-			      USB_RECIP_INTERFACE, 0, 0, NULL, 0,
-			      USB_CTRL_GET_TIMEOUT);
-	if (ret < 0)
-		return ret;
-	return 0;
-}
-
-static int at76_get_op_mode(struct usb_device *udev)
-{
-	int ret;
-	u8 saved;
-	u8 *op_mode;
-
-	op_mode = kmalloc(1, GFP_NOIO);
-	if (!op_mode)
-		return -ENOMEM;
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			      USB_TYPE_VENDOR | USB_DIR_IN |
-			      USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
-			      USB_CTRL_GET_TIMEOUT);
-	saved = *op_mode;
-	kfree(op_mode);
-
-	if (ret < 0)
-		return ret;
-	else if (ret < 1)
-		return -EIO;
-	else
-		return saved;
-}
-
-/* Load a block of the second ("external") part of the firmware */
-static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
-					 void *block, int size)
-{
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
-			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			       0x0802, blockno, block, size,
-			       USB_CTRL_GET_TIMEOUT);
-}
-
-static inline int at76_get_hw_cfg(struct usb_device *udev,
-				  union at76_hwcfg *buf, int buf_size)
-{
-	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			       USB_TYPE_VENDOR | USB_DIR_IN |
-			       USB_RECIP_INTERFACE, 0x0a02, 0,
-			       buf, buf_size, USB_CTRL_GET_TIMEOUT);
-}
-
-/* Intersil boards use a different "value" for GetHWConfig requests */
-static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
-					   union at76_hwcfg *buf, int buf_size)
-{
-	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			       USB_TYPE_VENDOR | USB_DIR_IN |
-			       USB_RECIP_INTERFACE, 0x0902, 0,
-			       buf, buf_size, USB_CTRL_GET_TIMEOUT);
-}
-
-/* Get the hardware configuration for the adapter and put it to the appropriate
- * fields of 'priv' (the GetHWConfig request and interpretation of the result
- * depends on the board type) */
-static int at76_get_hw_config(struct at76_priv *priv)
-{
-	int ret;
-	union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL);
-
-	if (!hwcfg)
-		return -ENOMEM;
-
-	if (at76_is_intersil(priv->board_type)) {
-		ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
-					       sizeof(hwcfg->i));
-		if (ret < 0)
-			goto exit;
-		memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
-		priv->regulatory_domain = hwcfg->i.regulatory_domain;
-	} else if (at76_is_503rfmd(priv->board_type)) {
-		ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
-		if (ret < 0)
-			goto exit;
-		memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
-		priv->regulatory_domain = hwcfg->r3.regulatory_domain;
-	} else {
-		ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
-		if (ret < 0)
-			goto exit;
-		memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
-		priv->regulatory_domain = hwcfg->r5.regulatory_domain;
-	}
-
-exit:
-	kfree(hwcfg);
-	if (ret < 0)
-		printk(KERN_ERR "%s: cannot get HW Config (error %d)\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static struct reg_domain const *at76_get_reg_domain(u16 code)
-{
-	int i;
-	static struct reg_domain const fd_tab[] = {
-		{0x10, "FCC (USA)", 0x7ff},	/* ch 1-11 */
-		{0x20, "IC (Canada)", 0x7ff},	/* ch 1-11 */
-		{0x30, "ETSI (most of Europe)", 0x1fff},	/* ch 1-13 */
-		{0x31, "Spain", 0x600},	/* ch 10-11 */
-		{0x32, "France", 0x1e00},	/* ch 10-13 */
-		{0x40, "MKK (Japan)", 0x2000},	/* ch 14 */
-		{0x41, "MKK1 (Japan)", 0x3fff},	/* ch 1-14 */
-		{0x50, "Israel", 0x3fc},	/* ch 3-9 */
-		{0x00, "<unknown>", 0xffffffff}	/* ch 1-32 */
-	};
-
-	/* Last entry is fallback for unknown domain code */
-	for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
-		if (code == fd_tab[i].code)
-			break;
-
-	return &fd_tab[i];
-}
-
-static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
-			       int buf_size)
-{
-	int ret;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
-			      USB_TYPE_VENDOR | USB_DIR_IN |
-			      USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
-			      USB_CTRL_GET_TIMEOUT);
-	if (ret >= 0 && ret != buf_size)
-		return -EIO;
-	return ret;
-}
-
-/* Return positive number for status, negative for an error */
-static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
-{
-	u8 *stat_buf;
-	int ret;
-
-	stat_buf = kmalloc(40, GFP_NOIO);
-	if (!stat_buf)
-		return -ENOMEM;
-
-	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
-			      USB_TYPE_VENDOR | USB_DIR_IN |
-			      USB_RECIP_INTERFACE, cmd, 0, stat_buf,
-			      40, USB_CTRL_GET_TIMEOUT);
-	if (ret >= 0)
-		ret = stat_buf[5];
-	kfree(stat_buf);
-
-	return ret;
-}
-
-static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
-				 int buf_size)
-{
-	int ret;
-	struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) +
-					       buf_size, GFP_KERNEL);
-
-	if (!cmd_buf)
-		return -ENOMEM;
-
-	cmd_buf->cmd = cmd;
-	cmd_buf->reserved = 0;
-	cmd_buf->size = cpu_to_le16(buf_size);
-	memcpy(cmd_buf->data, buf, buf_size);
-
-	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
-			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
-			      0, 0, cmd_buf,
-			      sizeof(struct at76_command) + buf_size,
-			      USB_CTRL_GET_TIMEOUT);
-	kfree(cmd_buf);
-	return ret;
-}
-
-#define MAKE_CMD_STATUS_CASE(c)	case (c): return #c
-static const char *at76_get_cmd_status_string(u8 cmd_status)
-{
-	switch (cmd_status) {
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
-		MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
-	}
-
-	return "UNKNOWN";
-}
-
-/* Wait until the command is completed */
-static int at76_wait_completion(struct at76_priv *priv, int cmd)
-{
-	int status = 0;
-	unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;
-
-	do {
-		status = at76_get_cmd_status(priv->udev, cmd);
-		if (status < 0) {
-			printk(KERN_ERR "%s: at76_get_cmd_status failed: %d\n",
-			       priv->netdev->name, status);
-			break;
-		}
-
-		at76_dbg(DBG_WAIT_COMPLETE,
-			 "%s: Waiting on cmd %d, status = %d (%s)",
-			 priv->netdev->name, cmd, status,
-			 at76_get_cmd_status_string(status));
-
-		if (status != CMD_STATUS_IN_PROGRESS
-		    && status != CMD_STATUS_IDLE)
-			break;
-
-		schedule_timeout_interruptible(HZ / 10);	/* 100 ms */
-		if (time_after(jiffies, timeout)) {
-			printk(KERN_ERR
-			       "%s: completion timeout for command %d\n",
-			       priv->netdev->name, cmd);
-			status = -ETIMEDOUT;
-			break;
-		}
-	} while (1);
-
-	return status;
-}
-
-static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
-{
-	int ret;
-
-	ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
-				    offsetof(struct set_mib_buffer,
-					     data) + buf->size);
-	if (ret < 0)
-		return ret;
-
-	ret = at76_wait_completion(priv, CMD_SET_MIB);
-	if (ret != CMD_STATUS_COMPLETE) {
-		printk(KERN_INFO
-		       "%s: set_mib: at76_wait_completion failed "
-		       "with %d\n", priv->netdev->name, ret);
-		ret = -EIO;
-	}
-
-	return ret;
-}
-
-/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
-static int at76_set_radio(struct at76_priv *priv, int enable)
-{
-	int ret;
-	int cmd;
-
-	if (priv->radio_on == enable)
-		return 0;
-
-	cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;
-
-	ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
-	if (ret < 0)
-		printk(KERN_ERR "%s: at76_set_card_command(%d) failed: %d\n",
-		       priv->netdev->name, cmd, ret);
-	else
-		ret = 1;
-
-	priv->radio_on = enable;
-	return ret;
-}
-
-/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
-static int at76_set_pm_mode(struct at76_priv *priv)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC_MGMT;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
-	priv->mib_buf.data.byte = priv->pm_mode;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (pm_mode) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-/* Set the association id for power save mode */
-static int at76_set_associd(struct at76_priv *priv, u16 id)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC_MGMT;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac_mgmt, station_id);
-	priv->mib_buf.data.word = cpu_to_le16(id);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (associd) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-/* Set the listen interval for power save mode */
-static int at76_set_listen_interval(struct at76_priv *priv, u16 interval)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac, listen_interval);
-	priv->mib_buf.data.word = cpu_to_le16(interval);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR
-		       "%s: set_mib (listen_interval) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_preamble(struct at76_priv *priv, u8 type)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_LOCAL;
-	priv->mib_buf.size = 1;
-	priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
-	priv->mib_buf.data.byte = type;
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (preamble) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_frag(struct at76_priv *priv, u16 size)
-{
-	int ret = 0;
-
-	priv->mib_buf.type = MIB_MAC;
-	priv->mib_buf.size = 2;
-	priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
-	priv->mib_buf.data.word = cpu_to_le16(size);
-
-	ret = at76_set_mib(priv, &priv->mib_buf);
-	if (ret < 0)
-		printk(KERN_ERR "%s: set_mib (frag threshold) failed: %d\n",
-		       priv->netdev->name, ret);
-
-	return ret;
-}
-
-static int at76_set_rts(struct at76_priv *priv, u16 size)
-{
-	int ret = 0;