diff options
| author | Dan Williams <dan.j.williams@intel.com> | 2011-09-30 18:52:19 -0700 |
|---|---|---|
| committer | James Bottomley <JBottomley@Parallels.com> | 2011-10-02 13:20:03 -0500 |
| commit | b50102d3e9a43a75379407c2080f696f61cb286b (patch) | |
| tree | b37eb5ed05f2228842c54cdac455f00ec846746e /drivers/scsi/libsas | |
| parent | 4f3f812dd3b638d0c92661122dcccd6aaef66bfb (diff) | |
[SCSI] isci: atapi support
Based on original implementation from Jiangbi Liu and Maciej Trela.
ATAPI transfers happen in two-to-three stages. The two stage atapi
commands are those that include a dma data transfer. The data transfer
portion of these operations is handled by the hardware packet-dma
acceleration. The three-stage commands do not have a data transfer and
are handled without hardware assistance in raw frame mode.
stage1: transmit host-to-device fis to notify the device of an incoming
atapi cdb. Upon reception of the pio-setup-fis repost the task_context
to perform the dma transfer of the cdb+data (go to stage3), or repost
the task_context to transmit the cdb as a raw frame (go to stage 2).
stage2: wait for hardware notification of the cdb transmission and then
go to stage 3.
stage3: wait for the arrival of the terminating device-to-host fis and
terminate the command.
To keep the implementation simple we only support ATAPI packet-dma
protocol (for commands with data) to avoid needing to handle the data
transfer manually (like we do for SATA-PIO). This may affect
compatibility for a small number of devices (see
ATA_HORKAGE_ATAPI_MOD16_DMA).
If the data-transfer underruns, or encounters an error the
device-to-host fis is expected to arrive in the unsolicited frame queue
to pass to libata for disposition. However, in the DONE_UNEXP_FIS (data
underrun) case it appears we need to craft a response. In the
DONE_REG_ERR case we do receive the UF and propagate it to libsas.
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Diffstat (limited to 'drivers/scsi/libsas')
| -rw-r--r-- | drivers/scsi/libsas/sas_scsi_host.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index ebd1417339e..b2c4a773165 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -801,7 +801,7 @@ void sas_slave_destroy(struct scsi_device *scsi_dev) struct domain_device *dev = sdev_to_domain_dev(scsi_dev); if (dev_is_sata(dev)) - dev->sata_dev.ap->link.device[0].class = ATA_DEV_NONE; + sas_to_ata_dev(dev)->class = ATA_DEV_NONE; } int sas_change_queue_depth(struct scsi_device *sdev, int depth, int reason) |