Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull second SCSI update from James "Jaj B" Bottomley:
 "This is the final round of SCSI patches for the merge window.  It
  consists mostly of driver updates (bnx2fc, ibmfc, fnic, lpfc,
  be2iscsi, pm80xx, qla4x and ipr).

  There's also the power management updates that complete the patches in
  Jens' tree, an iscsi refcounting problem fix from the last pull, some
  dif handling in scsi_debug fixes, a few nice code cleanups and an
  error handling busy bug fix."

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (92 commits)
  [SCSI] qla2xxx: Update firmware link in Kconfig file.
  [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
  [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
  [SCSI] pm80xx: thermal, sas controller config and error handling update
  [SCSI] pm80xx: NCQ error handling changes
  [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
  [SCSI] pm80xx: Changed module name and debug messages update
  [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it
  [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
  [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
  [SCSI] pm80xx: MSI-X implementation for using 64 interrupts
  [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
  [SCSI] pm80xx: Multiple inbound/outbound queue configuration
  [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
  [SCSI] lpfc: fix up Kconfig dependencies
  [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
  [SCSI] sd: change to auto suspend mode
  [SCSI] sd: use REQ_PM in sd's runtime suspend operation
  [SCSI] qla4xxx: Fix iocb_cnt calculation in qla4xxx_send_mbox_iocb()
  [SCSI] ufs: Correct the expected data transfersize
  ...

1 files changed, 9 insertions, 9 deletions

diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index bdb81cda840..161c98efade 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -285,14 +285,14 @@ int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
 	if (phy->attached_tproto & SAS_PROTOCOL_STP)
 		dev->tproto = phy->attached_tproto;
 	if (phy->attached_sata_dev)
-		dev->tproto |= SATA_DEV;
+		dev->tproto |= SAS_SATA_DEV;
 
-	if (phy->attached_dev_type == SATA_PENDING)
-		dev->dev_type = SATA_PENDING;
+	if (phy->attached_dev_type == SAS_SATA_PENDING)
+		dev->dev_type = SAS_SATA_PENDING;
 	else {
 		int res;
 
-		dev->dev_type = SATA_DEV;
+		dev->dev_type = SAS_SATA_DEV;
 		res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
 					      &dev->sata_dev.rps_resp);
 		if (res) {
@@ -314,7 +314,7 @@ static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
 	int res;
 
 	/* we weren't pending, so successfully end the reset sequence now */
-	if (dev->dev_type != SATA_PENDING)
+	if (dev->dev_type != SAS_SATA_PENDING)
 		return 1;
 
 	/* hmmm, if this succeeds do we need to repost the domain_device to the
@@ -348,9 +348,9 @@ static int smp_ata_check_ready(struct ata_link *link)
 		return 0;
 
 	switch (ex_phy->attached_dev_type) {
-	case SATA_PENDING:
+	case SAS_SATA_PENDING:
 		return 0;
-	case SAS_END_DEV:
+	case SAS_END_DEVICE:
 		if (ex_phy->attached_sata_dev)
 			return sas_ata_clear_pending(dev, ex_phy);
 	default:
@@ -631,7 +631,7 @@ static void sas_get_ata_command_set(struct domain_device *dev)
 	struct dev_to_host_fis *fis =
 		(struct dev_to_host_fis *) dev->frame_rcvd;
 
-	if (dev->dev_type == SATA_PENDING)
+	if (dev->dev_type == SAS_SATA_PENDING)
 		return;
 
 	if ((fis->sector_count == 1 && /* ATA */
@@ -797,7 +797,7 @@ int sas_discover_sata(struct domain_device *dev)
 {
 	int res;
 
-	if (dev->dev_type == SATA_PM)
+	if (dev->dev_type == SAS_SATA_PM)
 		return -ENODEV;
 
 	sas_get_ata_command_set(dev);