aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-08-11 15:52:06 +1000
committerJesse Barnes <jbarnes@virtuousgeek.org>2009-09-09 13:29:36 -0700
commitdeb2d2ecd43dfc51efe71eed7128fda514da96c6 (patch)
treeba05339620bc285265f88d2c7c43df5fc25b732c /drivers/pci/pci.c
parent500559a92dd36af7cee95ed2f5b7722fb95a82e7 (diff)
PCI/GPU: implement VGA arbitration on Linux
Background: Graphic devices are accessed through ranges in I/O or memory space. While most modern devices allow relocation of such ranges, some "Legacy" VGA devices implemented on PCI will typically have the same "hard-decoded" addresses as they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994 Standard for Boot (Initialization Configuration) Firmware Revision 2.1" Section 7, Legacy Devices. The Resource Access Control (RAC) module inside the X server currently does the task of arbitration when more than one legacy device co-exists on the same machine. But the problem happens when these devices are trying to be accessed by different userspace clients (e.g. two server in parallel). Their address assignments conflict. Therefore an arbitration scheme _outside_ of the X server is needed to control the sharing of these resources. This document introduces the operation of the VGA arbiter implemented for Linux kernel. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c44
1 files changed, 44 insertions, 0 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7d55039ffa0..bd993351db4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2520,6 +2520,50 @@ int pci_resource_bar(struct pci_dev *dev, int resno, enum pci_bar_type *type)
return 0;
}
+/**
+ * pci_set_vga_state - set VGA decode state on device and parents if requested
+ * @dev the PCI device
+ * @decode - true = enable decoding, false = disable decoding
+ * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
+ * @change_bridge - traverse ancestors and change bridges
+ */
+int pci_set_vga_state(struct pci_dev *dev, bool decode,
+ unsigned int command_bits, bool change_bridge)
+{
+ struct pci_bus *bus;
+ struct pci_dev *bridge;
+ u16 cmd;
+
+ WARN_ON(command_bits & ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if (decode == true)
+ cmd |= command_bits;
+ else
+ cmd &= ~command_bits;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ if (change_bridge == false)
+ return 0;
+
+ bus = dev->bus;
+ while (bus) {
+ bridge = bus->self;
+ if (bridge) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL,
+ &cmd);
+ if (decode == true)
+ cmd |= PCI_BRIDGE_CTL_VGA;
+ else
+ cmd &= ~PCI_BRIDGE_CTL_VGA;
+ pci_write_config_word(bridge, PCI_BRIDGE_CONTROL,
+ cmd);
+ }
+ bus = bus->parent;
+ }
+ return 0;
+}
+
#define RESOURCE_ALIGNMENT_PARAM_SIZE COMMAND_LINE_SIZE
static char resource_alignment_param[RESOURCE_ALIGNMENT_PARAM_SIZE] = {0};
spinlock_t resource_alignment_lock = SPIN_LOCK_UNLOCKED;