diff options
| author | Yuji Shimada <shimada-yxb@necst.nec.co.jp> | 2009-04-03 16:41:46 +0900 |
|---|---|---|
| committer | Jesse Barnes <jbarnes@virtuousgeek.org> | 2009-04-06 11:25:06 -0700 |
| commit | 296ccb086dfb89b5b8d73ef08c795ffdff12a597 (patch) | |
| tree | 8c4ef0f0271e448b6843811a1bcded8c47c005a1 /drivers/pci/bus.c | |
| parent | 7eb93b175d4de9438a4b0af3a94a112cb5266944 (diff) | |
PCI: Setup disabled bridges even if buses are added
This patch sets up disabled bridges even if buses have already been
added.
pci_assign_unassigned_resources is called after buses are added.
pci_assign_unassigned_resources calls pci_bus_assign_resources.
pci_bus_assign_resources calls pci_setup_bridge to configure BARs of
bridges.
Currently pci_setup_bridge returns immediately if the bus have already
been added. So pci_assign_unassigned_resources can't configure BARs of
bridges that were added in a disabled state; this patch fixes the issue.
On logical hot-add, we need to prevent the kernel from re-initializing
bridges that have already been initialized. To achieve this,
pci_setup_bridge returns immediately if the bridge have already been
enabled.
We don't need to check whether the specified bus is a root bus or not.
pci_setup_bridge is not called on a root bus, because a root bus does
not have a bridge.
The patch adds a new helper function, pci_is_enabled. I made the
function name similar to pci_is_managed. The codes which use
enable_cnt directly are changed to use pci_is_enabled.
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Diffstat (limited to 'drivers/pci/bus.c')
| -rw-r--r-- | drivers/pci/bus.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 68f91a25259..97a8194063b 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -184,7 +184,7 @@ void pci_enable_bridges(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->subordinate) { - if (atomic_read(&dev->enable_cnt) == 0) { + if (!pci_is_enabled(dev)) { retval = pci_enable_device(dev); pci_set_master(dev); } |