From 296ccb086dfb89b5b8d73ef08c795ffdff12a597 Mon Sep 17 00:00:00 2001 From: Yuji Shimada Date: Fri, 3 Apr 2009 16:41:46 +0900 Subject: PCI: Setup disabled bridges even if buses are added This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang Signed-off-by: Yuji Shimada Signed-off-by: Jesse Barnes --- drivers/pci/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/pci/bus.c') diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 68f91a25259..97a8194063b 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -184,7 +184,7 @@ void pci_enable_bridges(struct pci_bus *bus) list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->subordinate) { - if (atomic_read(&dev->enable_cnt) == 0) { + if (!pci_is_enabled(dev)) { retval = pci_enable_device(dev); pci_set_master(dev); } -- cgit v1.2.3-18-g5258