Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

1 files changed, 126 insertions, 80 deletions

diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index 9a95831bd06..fb4a5983064 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -14,6 +14,7 @@
 #include <linux/netdevice.h>
 #include <linux/err.h>
 #include <linux/phy.h>
+#include <linux/phy_fixed.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_mdio.h>
@@ -22,27 +23,6 @@
 MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
 MODULE_LICENSE("GPL");
 
-static void of_set_phy_supported(struct phy_device *phydev, u32 max_speed)
-{
-	/* The default values for phydev->supported are provided by the PHY
-	 * driver "features" member, we want to reset to sane defaults fist
-	 * before supporting higher speeds.
-	 */
-	phydev->supported &= PHY_DEFAULT_FEATURES;
-
-	switch (max_speed) {
-	default:
-		return;
-
-	case SPEED_1000:
-		phydev->supported |= PHY_1000BT_FEATURES;
-	case SPEED_100:
-		phydev->supported |= PHY_100BT_FEATURES;
-	case SPEED_10:
-		phydev->supported |= PHY_10BT_FEATURES;
-	}
-}
-
 /* Extract the clause 22 phy ID from the compatible string of the form
  * ethernet-phy-idAAAA.BBBB */
 static int of_get_phy_id(struct device_node *device, u32 *phy_id)
@@ -66,7 +46,6 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi
 	struct phy_device *phy;
 	bool is_c45;
 	int rc;
-	u32 max_speed = 0;
 	u32 phy_id;
 
 	is_c45 = of_device_is_compatible(child,
@@ -103,17 +82,33 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi
 		return 1;
 	}
 
-	/* Set phydev->supported based on the "max-speed" property
-	 * if present */
-	if (!of_property_read_u32(child, "max-speed", &max_speed))
-		of_set_phy_supported(phy, max_speed);
-
 	dev_dbg(&mdio->dev, "registered phy %s at address %i\n",
 		child->name, addr);
 
 	return 0;
 }
 
+static int of_mdio_parse_addr(struct device *dev, const struct device_node *np)
+{
+	u32 addr;
+	int ret;
+
+	ret = of_property_read_u32(np, "reg", &addr);
+	if (ret < 0) {
+		dev_err(dev, "%s has invalid PHY address\n", np->full_name);
+		return ret;
+	}
+
+	/* A PHY must have a reg property in the range [0-31] */
+	if (addr >= PHY_MAX_ADDR) {
+		dev_err(dev, "%s PHY address %i is too large\n",
+			np->full_name, addr);
+		return -EINVAL;
+	}
+
+	return addr;
+}
+
 /**
  * of_mdiobus_register - Register mii_bus and create PHYs from the device tree
  * @mdio: pointer to mii_bus structure
@@ -126,9 +121,8 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 {
 	struct device_node *child;
 	const __be32 *paddr;
-	u32 addr;
 	bool scanphys = false;
-	int rc, i, len;
+	int addr, rc, i;
 
 	/* Mask out all PHYs from auto probing.  Instead the PHYs listed in
 	 * the device tree are populated after the bus has been registered */
@@ -148,19 +142,9 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 
 	/* Loop over the child nodes and register a phy_device for each one */
 	for_each_available_child_of_node(np, child) {
-		/* A PHY must have a reg property in the range [0-31] */
-		paddr = of_get_property(child, "reg", &len);
-		if (!paddr || len < sizeof(*paddr)) {
+		addr = of_mdio_parse_addr(&mdio->dev, child);
+		if (addr < 0) {
 			scanphys = true;
-			dev_err(&mdio->dev, "%s has invalid PHY address\n",
-				child->full_name);
-			continue;
-		}
-
-		addr = be32_to_cpup(paddr);
-		if (addr >= PHY_MAX_ADDR) {
-			dev_err(&mdio->dev, "%s PHY address %i is too large\n",
-				child->full_name, addr);
 			continue;
 		}
 
@@ -175,7 +159,7 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 	/* auto scan for PHYs with empty reg property */
 	for_each_available_child_of_node(np, child) {
 		/* Skip PHYs with reg property set */
-		paddr = of_get_property(child, "reg", &len);
+		paddr = of_get_property(child, "reg", NULL);
 		if (paddr)
 			continue;
 
@@ -198,6 +182,40 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
 }
 EXPORT_SYMBOL(of_mdiobus_register);
 
+/**
+ * of_mdiobus_link_phydev - Find a device node for a phy
+ * @mdio: pointer to mii_bus structure
+ * @phydev: phydev for which the of_node pointer should be set
+ *
+ * Walk the list of subnodes of a mdio bus and look for a node that matches the
+ * phy's address with its 'reg' property. If found, set the of_node pointer for
+ * the phy. This allows auto-probed pyh devices to be supplied with information
+ * passed in via DT.
+ */
+void of_mdiobus_link_phydev(struct mii_bus *mdio,
+			    struct phy_device *phydev)
+{
+	struct device *dev = &phydev->dev;
+	struct device_node *child;
+
+	if (dev->of_node || !mdio->dev.of_node)
+		return;
+
+	for_each_available_child_of_node(mdio->dev.of_node, child) {
+		int addr;
+
+		addr = of_mdio_parse_addr(&mdio->dev, child);
+		if (addr < 0)
+			continue;
+
+		if (addr == phydev->addr) {
+			dev->of_node = child;
+			return;
+		}
+	}
+}
+EXPORT_SYMBOL(of_mdiobus_link_phydev);
+
 /* Helper function for of_phy_find_device */
 static int of_phy_match(struct device *dev, void *phy_np)
 {
@@ -245,44 +263,6 @@ struct phy_device *of_phy_connect(struct net_device *dev,
 EXPORT_SYMBOL(of_phy_connect);
 
 /**
- * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
- * @dev: pointer to net_device claiming the phy
- * @hndlr: Link state callback for the network device
- * @iface: PHY data interface type
- *
- * This function is a temporary stop-gap and will be removed soon.  It is
- * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers.  Do
- * not call this function from new drivers.
- */
-struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
-					     void (*hndlr)(struct net_device *),
-					     phy_interface_t iface)
-{
-	struct device_node *net_np;
-	char bus_id[MII_BUS_ID_SIZE + 3];
-	struct phy_device *phy;
-	const __be32 *phy_id;
-	int sz;
-
-	if (!dev->dev.parent)
-		return NULL;
-
-	net_np = dev->dev.parent->of_node;
-	if (!net_np)
-		return NULL;
-
-	phy_id = of_get_property(net_np, "fixed-link", &sz);
-	if (!phy_id || sz < sizeof(*phy_id))
-		return NULL;
-
-	sprintf(bus_id, PHY_ID_FMT, "fixed-0", be32_to_cpu(phy_id[0]));
-
-	phy = phy_connect(dev, bus_id, hndlr, iface);
-	return IS_ERR(phy) ? NULL : phy;
-}
-EXPORT_SYMBOL(of_phy_connect_fixed_link);
-
-/**
  * of_phy_attach - Attach to a PHY without starting the state machine
  * @dev: pointer to net_device claiming the phy
  * @phy_np: Node pointer for the PHY
@@ -301,3 +281,69 @@ struct phy_device *of_phy_attach(struct net_device *dev,
 	return phy_attach_direct(dev, phy, flags, iface) ? NULL : phy;
 }
 EXPORT_SYMBOL(of_phy_attach);
+
+#if defined(CONFIG_FIXED_PHY)
+/*
+ * of_phy_is_fixed_link() and of_phy_register_fixed_link() must
+ * support two DT bindings:
+ * - the old DT binding, where 'fixed-link' was a property with 5
+ *   cells encoding various informations about the fixed PHY
+ * - the new DT binding, where 'fixed-link' is a sub-node of the
+ *   Ethernet device.
+ */
+bool of_phy_is_fixed_link(struct device_node *np)
+{
+	struct device_node *dn;
+	int len;
+
+	/* New binding */
+	dn = of_get_child_by_name(np, "fixed-link");
+	if (dn) {
+		of_node_put(dn);
+		return true;
+	}
+
+	/* Old binding */
+	if (of_get_property(np, "fixed-link", &len) &&
+	    len == (5 * sizeof(__be32)))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL(of_phy_is_fixed_link);
+
+int of_phy_register_fixed_link(struct device_node *np)
+{
+	struct fixed_phy_status status = {};
+	struct device_node *fixed_link_node;
+	const __be32 *fixed_link_prop;
+	int len;
+
+	/* New binding */
+	fixed_link_node = of_get_child_by_name(np, "fixed-link");
+	if (fixed_link_node) {
+		status.link = 1;
+		status.duplex = of_property_read_bool(np, "full-duplex");
+		if (of_property_read_u32(fixed_link_node, "speed", &status.speed))
+			return -EINVAL;
+		status.pause = of_property_read_bool(np, "pause");
+		status.asym_pause = of_property_read_bool(np, "asym-pause");
+		of_node_put(fixed_link_node);
+		return fixed_phy_register(PHY_POLL, &status, np);
+	}
+
+	/* Old binding */
+	fixed_link_prop = of_get_property(np, "fixed-link", &len);
+	if (fixed_link_prop && len == (5 * sizeof(__be32))) {
+		status.link = 1;
+		status.duplex = be32_to_cpu(fixed_link_prop[1]);
+		status.speed = be32_to_cpu(fixed_link_prop[2]);
+		status.pause = be32_to_cpu(fixed_link_prop[3]);
+		status.asym_pause = be32_to_cpu(fixed_link_prop[4]);
+		return fixed_phy_register(PHY_POLL, &status, np);
+	}
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL(of_phy_register_fixed_link);
+#endif