diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2008-11-03 11:27:38 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2009-01-18 10:44:05 -0800 |
| commit | 9e48dd3dd3a746e3daa6835da088d89d1921c6fb (patch) | |
| tree | 15a25d7fe9482bf062526d4590308a2789385555 /drivers/net/wireless/ath5k/phy.c | |
| parent | 66d8431bb666e3ef198d2d20ced134b1b48bc276 (diff) | |
ath5k: ignore the return value of ath5k_hw_noise_floor_calibration
commit 8b0162a3dc5c30e862b7a73da29e32de3170f5e4 upstream.
Noise floor calibration occasionally fails on Atheros hardware.
This is not fatal and can happen if there's simply too much
noise on the air. Ignoring the calibration error is the right
thing to do here, because when the error is ignored, the hardware
will still work, whereas if the error causes the driver to bail out
of a bigger configuration function and does not configure the tx
queues or the IMR (as is the case in reset.c), the hw no longer
works properly until the next reset.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/net/wireless/ath5k/phy.c')
| -rw-r--r-- | drivers/net/wireless/ath5k/phy.c | 4 |
1 files changed, 1 insertions, 3 deletions
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c index e43f6563e61..35c7eb14255 100644 --- a/drivers/net/wireless/ath5k/phy.c +++ b/drivers/net/wireless/ath5k/phy.c @@ -2195,9 +2195,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah, return ret; } - ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq); - if (ret) - return ret; + ath5k_hw_noise_floor_calibration(ah, channel->center_freq); /* * Re-enable RX/TX and beacons |