Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1579 insertions, 0 deletions

diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h
new file mode 100644
index 00000000000..2b19f8ad031
--- /dev/null
+++ b/drivers/net/sk98lin/h/xmac_ii.h
@@ -0,0 +1,1579 @@
+/******************************************************************************
+ *
+ * Name:	xmac_ii.h
+ * Project:	Gigabit Ethernet Adapters, Common Modules
+ * Version:	$Revision: 1.52 $
+ * Date:	$Date: 2003/10/02 16:35:50 $
+ * Purpose:	Defines and Macros for Gigabit Ethernet Controller
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect.
+ *	(C)Copyright 2002-2003 Marvell.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+#ifndef __INC_XMAC_H
+#define __INC_XMAC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif	/* __cplusplus */
+
+/* defines ********************************************************************/
+
+/*
+ * XMAC II registers
+ *
+ * The XMAC registers are 16 or 32 bits wide.
+ * The XMACs host processor interface is set to 16 bit mode,
+ * therefore ALL registers will be addressed with 16 bit accesses.
+ *
+ * The following macros are provided to access the XMAC registers
+ * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(),
+ * XM_INHASH(), and XM_OUTHASH().
+ * The macros are defined in SkGeHw.h.
+ *
+ * Note:	NA reg	= Network Address e.g DA, SA etc.
+ *
+ */
+#define XM_MMU_CMD		0x0000	/* 16 bit r/w	MMU Command Register */
+	/* 0x0004:		reserved */
+#define XM_POFF			0x0008	/* 32 bit r/w	Packet Offset Register */
+#define XM_BURST		0x000c	/* 32 bit r/w	Burst Register for half duplex*/
+#define XM_1L_VLAN_TAG	0x0010	/* 16 bit r/w	One Level VLAN Tag ID */
+#define XM_2L_VLAN_TAG	0x0014	/* 16 bit r/w	Two Level VLAN Tag ID */
+	/* 0x0018 - 0x001e:	reserved */
+#define XM_TX_CMD		0x0020	/* 16 bit r/w	Transmit Command Register */
+#define XM_TX_RT_LIM	0x0024	/* 16 bit r/w	Transmit Retry Limit Register */
+#define XM_TX_STIME		0x0028	/* 16 bit r/w	Transmit Slottime Register */
+#define XM_TX_IPG		0x002c	/* 16 bit r/w	Transmit Inter Packet Gap */
+#define XM_RX_CMD		0x0030	/* 16 bit r/w	Receive Command Register */
+#define XM_PHY_ADDR		0x0034	/* 16 bit r/w	PHY Address Register */
+#define XM_PHY_DATA		0x0038	/* 16 bit r/w	PHY Data Register */
+	/* 0x003c: 		reserved */
+#define XM_GP_PORT		0x0040	/* 32 bit r/w	General Purpose Port Register */
+#define XM_IMSK			0x0044	/* 16 bit r/w	Interrupt Mask Register */
+#define XM_ISRC			0x0048	/* 16 bit r/o	Interrupt Status Register */
+#define XM_HW_CFG		0x004c	/* 16 bit r/w	Hardware Config Register */
+	/* 0x0050 - 0x005e:	reserved */
+#define XM_TX_LO_WM		0x0060	/* 16 bit r/w	Tx FIFO Low Water Mark */
+#define XM_TX_HI_WM		0x0062	/* 16 bit r/w	Tx FIFO High Water Mark */
+#define XM_TX_THR		0x0064	/* 16 bit r/w	Tx Request Threshold */
+#define XM_HT_THR		0x0066	/* 16 bit r/w	Host Request Threshold */
+#define XM_PAUSE_DA		0x0068	/* NA reg r/w	Pause Destination Address */
+	/* 0x006e: 		reserved */
+#define XM_CTL_PARA		0x0070	/* 32 bit r/w	Control Parameter Register */
+#define XM_MAC_OPCODE	0x0074	/* 16 bit r/w	Opcode for MAC control frames */
+#define XM_MAC_PTIME	0x0076	/* 16 bit r/w	Pause time for MAC ctrl frames*/
+#define XM_TX_STAT		0x0078	/* 32 bit r/o	Tx Status LIFO Register */
+
+	/* 0x0080 - 0x00fc:	16 NA reg r/w	Exact Match Address Registers */
+	/* 				use the XM_EXM() macro to address */
+#define XM_EXM_START	0x0080	/* r/w	Start Address of the EXM Regs */
+
+	/*
+	 * XM_EXM(Reg)
+	 *
+	 * returns the XMAC address offset of specified Exact Match Addr Reg
+	 *
+	 * para:	Reg	EXM register to addr	(0 .. 15)
+	 *
+	 * usage:	XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]);
+	 */
+#define XM_EXM(Reg)	(XM_EXM_START + ((Reg) << 3))
+
+#define XM_SRC_CHK		0x0100	/* NA reg r/w	Source Check Address Register */
+#define XM_SA			0x0108	/* NA reg r/w	Station Address Register */
+#define XM_HSM			0x0110	/* 64 bit r/w	Hash Match Address Registers */
+#define XM_RX_LO_WM		0x0118	/* 16 bit r/w	Receive Low Water Mark */
+#define XM_RX_HI_WM		0x011a	/* 16 bit r/w	Receive High Water Mark */
+#define XM_RX_THR		0x011c	/* 32 bit r/w	Receive Request Threshold */
+#define XM_DEV_ID		0x0120	/* 32 bit r/o	Device ID Register */
+#define XM_MODE			0x0124	/* 32 bit r/w	Mode Register */
+#define XM_LSA			0x0128	/* NA reg r/o	Last Source Register */
+	/* 0x012e:		reserved */
+#define XM_TS_READ		0x0130	/* 32 bit r/o	Time Stamp Read Register */
+#define XM_TS_LOAD		0x0134	/* 32 bit r/o	Time Stamp Load Value */
+	/* 0x0138 - 0x01fe:	reserved */
+#define XM_STAT_CMD	0x0200	/* 16 bit r/w	Statistics Command Register */
+#define XM_RX_CNT_EV	0x0204	/* 32 bit r/o	Rx Counter Event Register */
+#define XM_TX_CNT_EV	0x0208	/* 32 bit r/o	Tx Counter Event Register */
+#define XM_RX_EV_MSK	0x020c	/* 32 bit r/w	Rx Counter Event Mask */
+#define XM_TX_EV_MSK	0x0210	/* 32 bit r/w	Tx Counter Event Mask */
+	/* 0x0204 - 0x027e:	reserved */
+#define XM_TXF_OK		0x0280	/* 32 bit r/o	Frames Transmitted OK Conuter */
+#define XM_TXO_OK_HI	0x0284	/* 32 bit r/o	Octets Transmitted OK High Cnt*/
+#define XM_TXO_OK_LO	0x0288	/* 32 bit r/o	Octets Transmitted OK Low Cnt */
+#define XM_TXF_BC_OK	0x028c	/* 32 bit r/o	Broadcast Frames Xmitted OK */
+#define XM_TXF_MC_OK	0x0290	/* 32 bit r/o	Multicast Frames Xmitted OK */
+#define XM_TXF_UC_OK	0x0294	/* 32 bit r/o	Unicast Frames Xmitted OK */
+#define XM_TXF_LONG		0x0298	/* 32 bit r/o	Tx Long Frame Counter */
+#define XM_TXE_BURST	0x029c	/* 32 bit r/o	Tx Burst Event Counter */
+#define XM_TXF_MPAUSE	0x02a0	/* 32 bit r/o	Tx Pause MAC Ctrl Frame Cnt */
+#define XM_TXF_MCTRL	0x02a4	/* 32 bit r/o	Tx MAC Ctrl Frame Counter */
+#define XM_TXF_SNG_COL	0x02a8	/* 32 bit r/o	Tx Single Collision Counter */
+#define XM_TXF_MUL_COL	0x02ac	/* 32 bit r/o	Tx Multiple Collision Counter */
+#define XM_TXF_ABO_COL	0x02b0	/* 32 bit r/o	Tx aborted due to Exces. Col. */
+#define XM_TXF_LAT_COL	0x02b4	/* 32 bit r/o	Tx Late Collision Counter */
+#define XM_TXF_DEF		0x02b8	/* 32 bit r/o	Tx Deferred Frame Counter */
+#define XM_TXF_EX_DEF	0x02bc	/* 32 bit r/o	Tx Excessive Deferall Counter */
+#define XM_TXE_FIFO_UR	0x02c0	/* 32 bit r/o	Tx FIFO Underrun Event Cnt */
+#define XM_TXE_CS_ERR	0x02c4	/* 32 bit r/o	Tx Carrier Sense Error Cnt */
+#define XM_TXP_UTIL		0x02c8	/* 32 bit r/o	Tx Utilization in % */
+	/* 0x02cc - 0x02ce:	reserved */
+#define XM_TXF_64B		0x02d0	/* 32 bit r/o	64 Byte Tx Frame Counter */
+#define XM_TXF_127B		0x02d4	/* 32 bit r/o	65-127 Byte Tx Frame Counter */
+#define XM_TXF_255B		0x02d8	/* 32 bit r/o	128-255 Byte Tx Frame Counter */
+#define XM_TXF_511B		0x02dc	/* 32 bit r/o	256-511 Byte Tx Frame Counter */
+#define XM_TXF_1023B	0x02e0	/* 32 bit r/o	512-1023 Byte Tx Frame Counter*/
+#define XM_TXF_MAX_SZ	0x02e4	/* 32 bit r/o	1024-MaxSize Byte Tx Frame Cnt*/
+	/* 0x02e8 - 0x02fe:	reserved */
+#define XM_RXF_OK		0x0300	/* 32 bit r/o	Frames Received OK */
+#define XM_RXO_OK_HI	0x0304	/* 32 bit r/o	Octets Received OK High Cnt */
+#define XM_RXO_OK_LO	0x0308	/* 32 bit r/o	Octets Received OK Low Counter*/
+#define XM_RXF_BC_OK	0x030c	/* 32 bit r/o	Broadcast Frames Received OK */
+#define XM_RXF_MC_OK	0x0310	/* 32 bit r/o	Multicast Frames Received OK */
+#define XM_RXF_UC_OK	0x0314	/* 32 bit r/o	Unicast Frames Received OK */
+#define XM_RXF_MPAUSE	0x0318	/* 32 bit r/o	Rx Pause MAC Ctrl Frame Cnt */
+#define XM_RXF_MCTRL	0x031c	/* 32 bit r/o	Rx MAC Ctrl Frame Counter */
+#define XM_RXF_INV_MP	0x0320	/* 32 bit r/o	Rx invalid Pause Frame Cnt */
+#define XM_RXF_INV_MOC	0x0324	/* 32 bit r/o	Rx Frames with inv. MAC Opcode*/
+#define XM_RXE_BURST	0x0328	/* 32 bit r/o	Rx Burst Event Counter */
+#define XM_RXE_FMISS	0x032c	/* 32 bit r/o	Rx Missed Frames Event Cnt */
+#define XM_RXF_FRA_ERR	0x0330	/* 32 bit r/o	Rx Framing Error Counter */
+#define XM_RXE_FIFO_OV	0x0334	/* 32 bit r/o	Rx FIFO overflow Event Cnt */
+#define XM_RXF_JAB_PKT	0x0338	/* 32 bit r/o	Rx Jabber Packet Frame Cnt */
+#define XM_RXE_CAR_ERR	0x033c	/* 32 bit r/o	Rx Carrier Event Error Cnt */
+#define XM_RXF_LEN_ERR	0x0340	/* 32 bit r/o	Rx in Range Length Error */
+#define XM_RXE_SYM_ERR	0x0344	/* 32 bit r/o	Rx Symbol Error Counter */
+#define XM_RXE_SHT_ERR	0x0348	/* 32 bit r/o	Rx Short Event Error Cnt */
+#define XM_RXE_RUNT		0x034c	/* 32 bit r/o	Rx Runt Event Counter */
+#define XM_RXF_LNG_ERR	0x0350	/* 32 bit r/o	Rx Frame too Long Error Cnt */
+#define XM_RXF_FCS_ERR	0x0354	/* 32 bit r/o	Rx Frame Check Seq. Error Cnt */
+	/* 0x0358 - 0x035a:	reserved */
+#define XM_RXF_CEX_ERR	0x035c	/* 32 bit r/o	Rx Carrier Ext Error Frame Cnt*/
+#define XM_RXP_UTIL		0x0360	/* 32 bit r/o	Rx Utilization in % */
+	/* 0x0364 - 0x0366:	reserved */
+#define XM_RXF_64B		0x0368	/* 32 bit r/o	64 Byte Rx Frame Counter */
+#define XM_RXF_127B		0x036c	/* 32 bit r/o	65-127 Byte Rx Frame Counter */
+#define XM_RXF_255B		0x0370	/* 32 bit r/o	128-255 Byte Rx Frame Counter */
+#define XM_RXF_511B		0x0374	/* 32 bit r/o	256-511 Byte Rx Frame Counter */
+#define XM_RXF_1023B	0x0378	/* 32 bit r/o	512-1023 Byte Rx Frame Counter*/
+#define XM_RXF_MAX_SZ	0x037c	/* 32 bit r/o	1024-MaxSize Byte Rx Frame Cnt*/
+	/* 0x02e8 - 0x02fe:	reserved */
+
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC Bit Definitions
+ *
+ * If the bit access behaviour differs from the register access behaviour
+ * (r/w, r/o) this is documented after the bit number.
+ * The following bit access behaviours are used:
+ *	(sc)	self clearing
+ *	(ro)	read only
+ */
+
+/*	XM_MMU_CMD	16 bit r/w	MMU Command Register */
+								/* Bit 15..13:	reserved */
+#define XM_MMU_PHY_RDY	(1<<12)	/* Bit 12:	PHY Read Ready */
+#define XM_MMU_PHY_BUSY	(1<<11)	/* Bit 11:	PHY Busy */
+#define XM_MMU_IGN_PF	(1<<10)	/* Bit 10:	Ignore Pause Frame */
+#define XM_MMU_MAC_LB	(1<<9)	/* Bit  9:	Enable MAC Loopback */
+								/* Bit  8:	reserved */
+#define XM_MMU_FRC_COL	(1<<7)	/* Bit  7:	Force Collision */
+#define XM_MMU_SIM_COL	(1<<6)	/* Bit  6:	Simulate Collision */
+#define XM_MMU_NO_PRE	(1<<5)	/* Bit  5:	No MDIO Preamble */
+#define XM_MMU_GMII_FD	(1<<4)	/* Bit  4:	GMII uses Full Duplex */
+#define XM_MMU_RAT_CTRL	(1<<3)	/* Bit  3:	Enable Rate Control */
+#define XM_MMU_GMII_LOOP (1<<2)	/* Bit  2:	PHY is in Loopback Mode */
+#define XM_MMU_ENA_RX	(1<<1)	/* Bit  1:	Enable Receiver */
+#define XM_MMU_ENA_TX	(1<<0)	/* Bit  0:	Enable Transmitter */
+
+
+/*	XM_TX_CMD	16 bit r/w	Transmit Command Register */
+								/* Bit 15..7:	reserved */
+#define XM_TX_BK2BK		(1<<6)	/* Bit  6:	Ignor Carrier Sense (Tx Bk2Bk)*/
+#define XM_TX_ENC_BYP	(1<<5)	/* Bit  5:	Set Encoder in Bypass Mode */
+#define XM_TX_SAM_LINE	(1<<4)	/* Bit  4: (sc)	Start utilization calculation */
+#define XM_TX_NO_GIG_MD	(1<<3)	/* Bit  3:	Disable Carrier Extension */
+#define XM_TX_NO_PRE	(1<<2)	/* Bit  2:	Disable Preamble Generation */
+#define XM_TX_NO_CRC	(1<<1)	/* Bit  1:	Disable CRC Generation */
+#define XM_TX_AUTO_PAD	(1<<0)	/* Bit  0:	Enable Automatic Padding */
+
+
+/*	XM_TX_RT_LIM	16 bit r/w	Transmit Retry Limit Register */
+								/* Bit 15..5:	reserved */
+#define XM_RT_LIM_MSK	0x1f	/* Bit  4..0:	Tx Retry Limit */
+
+
+/*	XM_TX_STIME	16 bit r/w	Transmit Slottime Register */
+								/* Bit 15..7:	reserved */
+#define XM_STIME_MSK	0x7f	/* Bit  6..0:	Tx Slottime bits */
+
+
+/*	XM_TX_IPG	16 bit r/w	Transmit Inter Packet Gap */
+								/* Bit 15..8:	reserved */
+#define XM_IPG_MSK		0xff	/* Bit  7..0:	IPG value bits */
+
+
+/*	XM_RX_CMD	16 bit r/w	Receive Command Register */
+								/* Bit 15..9:	reserved */
+#define XM_RX_LENERR_OK (1<<8)	/* Bit  8	don't set Rx Err bit for */
+								/*		inrange error packets */
+#define XM_RX_BIG_PK_OK	(1<<7)	/* Bit  7	don't set Rx Err bit for */
+								/*		jumbo packets */
+#define XM_RX_IPG_CAP	(1<<6)	/* Bit  6	repl. type field with IPG */
+#define XM_RX_TP_MD		(1<<5)	/* Bit  5:	Enable transparent Mode */
+#define XM_RX_STRIP_FCS	(1<<4)	/* Bit  4:	Enable FCS Stripping */
+#define XM_RX_SELF_RX	(1<<3)	/* Bit  3: 	Enable Rx of own packets */
+#define XM_RX_SAM_LINE	(1<<2)	/* Bit  2: (sc)	Start utilization calculation */
+#define XM_RX_STRIP_PAD	(1<<1)	/* Bit  1:	Strip pad bytes of Rx frames */
+#define XM_RX_DIS_CEXT	(1<<0)	/* Bit  0:	Disable carrier ext. check */
+
+
+/*	XM_PHY_ADDR	16 bit r/w	PHY Address Register */
+								/* Bit 15..5:	reserved */
+#define XM_PHY_ADDR_SZ	0x1f	/* Bit  4..0:	PHY Address bits */
+
+
+/*	XM_GP_PORT	32 bit r/w	General Purpose Port Register */
+								/* Bit 31..7:	reserved */
+#define XM_GP_ANIP		(1L<<6)	/* Bit  6: (ro)	Auto-Neg. in progress */
+#define XM_GP_FRC_INT	(1L<<5)	/* Bit  5: (sc)	Force Interrupt */
+								/* Bit  4:	reserved */
+#define XM_GP_RES_MAC	(1L<<3)	/* Bit  3: (sc)	Reset MAC and FIFOs */
+#define XM_GP_RES_STAT	(1L<<2)	/* Bit  2: (sc)	Reset the statistics module */
+								/* Bit  1:	reserved */
+#define XM_GP_INP_ASS	(1L<<0)	/* Bit  0: (ro) GP Input Pin asserted */
+
+
+/*	XM_IMSK		16 bit r/w	Interrupt Mask Register */
+/*	XM_ISRC		16 bit r/o	Interrupt Status Register */
+								/* Bit 15:	reserved */
+#define XM_IS_LNK_AE	(1<<14) /* Bit 14:	Link Asynchronous Event */
+#define XM_IS_TX_ABORT	(1<<13) /* Bit 13:	Transmit Abort, late Col. etc */
+#define XM_IS_FRC_INT	(1<<12) /* Bit 12:	Force INT bit set in GP */
+#define XM_IS_INP_ASS	(1<<11)	/* Bit 11:	Input Asserted, GP bit 0 set */
+#define XM_IS_LIPA_RC	(1<<10)	/* Bit 10:	Link Partner requests config */
+#define XM_IS_RX_PAGE	(1<<9)	/* Bit  9:	Page Received */
+#define XM_IS_TX_PAGE	(1<<8)	/* Bit  8:	Next Page Loaded for Transmit */
+#define XM_IS_AND		(1<<7)	/* Bit  7:	Auto-Negotiation Done */
+#define XM_IS_TSC_OV	(1<<6)	/* Bit  6:	Time Stamp Counter Overflow */
+#define XM_IS_RXC_OV	(1<<5)	/* Bit  5:	Rx Counter Event Overflow */
+#define XM_IS_TXC_OV	(1<<4)	/* Bit  4:	Tx Counter Event Overflow */
+#define XM_IS_RXF_OV	(1<<3)	/* Bit  3:	Receive FIFO Overflow */
+#define XM_IS_TXF_UR	(1<<2)	/* Bit  2:	Transmit FIFO Underrun */
+#define XM_IS_TX_COMP	(1<<1)	/* Bit  1:	Frame Tx Complete */
+#define XM_IS_RX_COMP	(1<<0)	/* Bit  0:	Frame Rx Complete */
+
+#define XM_DEF_MSK	(~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\
+			XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR))
+
+
+/*	XM_HW_CFG	16 bit r/w	Hardware Config Register */
+								/* Bit 15.. 4:	reserved */
+#define XM_HW_GEN_EOP	(1<<3)	/* Bit  3:	generate End of Packet pulse */
+#define XM_HW_COM4SIG	(1<<2)	/* Bit  2:	use Comma Detect for Sig. Det.*/
+								/* Bit  1:	reserved */
+#define XM_HW_GMII_MD	(1<<0)	/* Bit  0:	GMII Interface selected */
+
+
+/*	XM_TX_LO_WM	16 bit r/w	Tx FIFO Low Water Mark */
+/*	XM_TX_HI_WM	16 bit r/w	Tx FIFO High Water Mark */
+								/* Bit 15..10	reserved */
+#define XM_TX_WM_MSK	0x01ff	/* Bit  9.. 0	Tx FIFO Watermark bits */
+
+/*	XM_TX_THR	16 bit r/w	Tx Request Threshold */
+/*	XM_HT_THR	16 bit r/w	Host Request Threshold */
+/*	XM_RX_THR	16 bit r/w	Rx Request Threshold */
+								/* Bit 15..11	reserved */
+#define XM_THR_MSK		0x03ff	/* Bit 10.. 0	Rx/Tx Request Threshold bits */
+
+
+/*	XM_TX_STAT	32 bit r/o	Tx Status LIFO Register */
+#define XM_ST_VALID		(1UL<<31)	/* Bit 31:	Status Valid */
+#define XM_ST_BYTE_CNT	(0x3fffL<<17)	/* Bit 30..17:	Tx frame Length */
+#define XM_ST_RETRY_CNT	(0x1fL<<12)	/* Bit 16..12:	Retry Count */
+#define XM_ST_EX_COL	(1L<<11)	/* Bit 11:	Excessive Collisions */
+#define XM_ST_EX_DEF	(1L<<10)	/* Bit 10:	Excessive Deferral */
+#define XM_ST_BURST		(1L<<9)		/* Bit  9:	p. xmitted in burst md*/
+#define XM_ST_DEFER		(1L<<8)		/* Bit  8:	packet was defered */
+#define XM_ST_BC		(1L<<7)		/* Bit  7:	Broadcast packet */
+#define XM_ST_MC		(1L<<6)		/* Bit  6:	Multicast packet */
+#define XM_ST_UC		(1L<<5)		/* Bit  5:	Unicast packet */
+#define XM_ST_TX_UR		(1L<<4)		/* Bit  4:	FIFO Underrun occured */
+#define XM_ST_CS_ERR	(1L<<3)		/* Bit  3:	Carrier Sense Error */
+#define XM_ST_LAT_COL	(1L<<2)		/* Bit  2:	Late Collision Error */
+#define XM_ST_MUL_COL	(1L<<1)		/* Bit  1:	Multiple Collisions */
+#define XM_ST_SGN_COL	(1L<<0)		/* Bit  0:	Single Collision */
+
+/*	XM_RX_LO_WM	16 bit r/w	Receive Low Water Mark */
+/*	XM_RX_HI_WM	16 bit r/w	Receive High Water Mark */
+									/* Bit 15..11:	reserved */
+#define XM_RX_WM_MSK	0x03ff		/* Bit 11.. 0:	Rx FIFO Watermark bits */
+
+
+/*	XM_DEV_ID	32 bit r/o	Device ID Register */
+#define XM_DEV_OUI	(0x00ffffffUL<<8)	/* Bit 31..8:	Device OUI */
+#define XM_DEV_REV	(0x07L << 5)		/* Bit  7..5:	Chip Rev Num */
+
+
+/*	XM_MODE		32 bit r/w	Mode Register */
+									/* Bit 31..27:	reserved */
+#define XM_MD_ENA_REJ	(1L<<26)	/* Bit 26:	Enable Frame Reject */
+#define XM_MD_SPOE_E	(1L<<25)	/* Bit 25:	Send Pause on Edge */
+									/* 		extern generated */
+#define XM_MD_TX_REP	(1L<<24)	/* Bit 24:	Transmit Repeater Mode */
+#define XM_MD_SPOFF_I	(1L<<23)	/* Bit 23:	Send Pause on FIFO full */
+									/*		intern generated */
+#define XM_MD_LE_STW	(1L<<22)	/* Bit 22:	Rx Stat Word in Little Endian */
+#define XM_MD_TX_CONT	(1L<<21)	/* Bit 21:	Send Continuous */
+#define XM_MD_TX_PAUSE	(1L<<20)	/* Bit 20: (sc)	Send Pause Frame */
+#define XM_MD_ATS		(1L<<19)	/* Bit 19:	Append Time Stamp */
+#define XM_MD_SPOL_I	(1L<<18)	/* Bit 18:	Send Pause on Low */
+									/*		intern generated */
+#define XM_MD_SPOH_I	(1L<<17)	/* Bit 17:	Send Pause on High */
+									/*		intern generated */
+#define XM_MD_CAP		(1L<<16)	/* Bit 16:	Check Address Pair */
+#define XM_MD_ENA_HASH	(1L<<15)	/* Bit 15:	Enable Hashing */
+#define XM_MD_CSA		(1L<<14)	/* Bit 14:	Check Station Address */
+#define XM_MD_CAA		(1L<<13)	/* Bit 13:	Check Address Array */
+#define XM_MD_RX_MCTRL	(1L<<12)	/* Bit 12:	Rx MAC Control Frame */
+#define XM_MD_RX_RUNT	(1L<<11)	/* Bit 11:	Rx Runt Frames */
+#define XM_MD_RX_IRLE	(1L<<10)	/* Bit 10:	Rx in Range Len Err Frame */
+#define XM_MD_RX_LONG	(1L<<9)		/* Bit  9:	Rx Long Frame */
+#define XM_MD_RX_CRCE	(1L<<8)		/* Bit  8:	Rx CRC Error Frame */
+#define XM_MD_RX_ERR	(1L<<7)		/* Bit  7:	Rx Error Frame */
+#define XM_MD_DIS_UC	(1L<<6)		/* Bit  6:	Disable Rx Unicast */
+#define XM_MD_DIS_MC	(1L<<5)		/* Bit  5:	Disable Rx Multicast */
+#define XM_MD_DIS_BC	(1L<<4)		/* Bit  4:	Disable Rx Broadcast */
+#define XM_MD_ENA_PROM	(1L<<3)		/* Bit  3:	Enable Promiscuous */
+#define XM_MD_ENA_BE	(1L<<2)		/* Bit  2:	Enable Big Endian */
+#define XM_MD_FTF		(1L<<1)		/* Bit  1: (sc)	Flush Tx FIFO */
+#define XM_MD_FRF		(1L<<0)		/* Bit  0: (sc)	Flush Rx FIFO */
+
+#define XM_PAUSE_MODE	(XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I)
+#define XM_DEF_MODE		(XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\
+				XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA)
+
+/*	XM_STAT_CMD	16 bit r/w	Statistics Command Register */
+								/* Bit 16..6:	reserved */
+#define XM_SC_SNP_RXC	(1<<5)	/* Bit  5: (sc)	Snap Rx Counters */
+#define XM_SC_SNP_TXC	(1<<4)	/* Bit  4: (sc)	Snap Tx Counters */
+#define XM_SC_CP_RXC	(1<<3)	/* Bit  3: 	Copy Rx Counters Continuously */
+#define XM_SC_CP_TXC	(1<<2)	/* Bit  2:	Copy Tx Counters Continuously */
+#define XM_SC_CLR_RXC	(1<<1)	/* Bit  1: (sc)	Clear Rx Counters */
+#define XM_SC_CLR_TXC	(1<<0)	/* Bit  0: (sc) Clear Tx Counters */
+
+
+/*	XM_RX_CNT_EV	32 bit r/o	Rx Counter Event Register */
+/*	XM_RX_EV_MSK	32 bit r/w	Rx Counter Event Mask */
+#define XMR_MAX_SZ_OV	(1UL<<31)	/* Bit 31:	1024-MaxSize Rx Cnt Ov*/
+#define XMR_1023B_OV	(1L<<30)	/* Bit 30:	512-1023Byte Rx Cnt Ov*/
+#define XMR_511B_OV		(1L<<29)	/* Bit 29:	256-511 Byte Rx Cnt Ov*/
+#define XMR_255B_OV		(1L<<28)	/* Bit 28:	128-255 Byte Rx Cnt Ov*/
+#define XMR_127B_OV		(1L<<27)	/* Bit 27:	65-127 Byte Rx Cnt Ov */
+#define XMR_64B_OV		(1L<<26)	/* Bit 26:	64 Byte Rx Cnt Ov */
+#define XMR_UTIL_OV		(1L<<25)	/* Bit 25:	Rx Util Cnt Overflow */
+#define XMR_UTIL_UR		(1L<<24)	/* Bit 24:	Rx Util Cnt Underrun */
+#define XMR_CEX_ERR_OV	(1L<<23)	/* Bit 23:	CEXT Err Cnt Ov */
+									/* Bit 22:	reserved */
+#define XMR_FCS_ERR_OV	(1L<<21)	/* Bit 21:	Rx FCS Error Cnt Ov */
+#define XMR_LNG_ERR_OV	(1L<<20)	/* Bit 20:	Rx too Long Err Cnt Ov*/
+#define XMR_RUNT_OV		(1L<<19)	/* Bit 19:	Runt Event Cnt Ov */
+#define XMR_SHT_ERR_OV	(1L<<18)	/* Bit 18:	Rx Short Ev Err Cnt Ov*/
+#define XMR_SYM_ERR_OV	(1L<<17)	/* Bit 17:	Rx Sym Err Cnt Ov */
+									/* Bit 16:	reserved */
+#define XMR_CAR_ERR_OV	(1L<<15)	/* Bit 15:	Rx Carr Ev Err Cnt Ov */
+#define XMR_JAB_PKT_OV	(1L<<14)	/* Bit 14:	Rx Jabb Packet Cnt Ov */
+#define XMR_FIFO_OV		(1L<<13)	/* Bit 13:	Rx FIFO Ov Ev Cnt Ov */
+#define XMR_FRA_ERR_OV	(1L<<12)	/* Bit 12:	Rx Framing Err Cnt Ov */
+#define XMR_FMISS_OV	(1L<<11)	/* Bit 11:	Rx Missed Ev Cnt Ov */
+#define XMR_BURST		(1L<<10)	/* Bit 10:	Rx Burst Event Cnt Ov */
+#define XMR_INV_MOC		(1L<<9)		/* Bit  9:	Rx with inv. MAC OC Ov*/
+#define XMR_INV_MP		(1L<<8)		/* Bit  8:	Rx inv Pause Frame Ov */
+#define XMR_MCTRL_OV	(1L<<7)		/* Bit  7:	Rx MAC Ctrl-F Cnt Ov */
+#define XMR_MPAUSE_OV	(1L<<6)		/* Bit  6:	Rx Pause MAC Ctrl-F Ov*/
+#define XMR_UC_OK_OV	(1L<<5)		/* Bit  5:	Rx Unicast Frame CntOv*/
+#define XMR_MC_OK_OV	(1L<<4)		/* Bit  4:	Rx Multicast Cnt Ov */
+#define XMR_BC_OK_OV	(1L<<3)		/* Bit  3:	Rx Broadcast Cnt Ov */
+#define XMR_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Rx OK Low CntOv*/
+#define XMR_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Rx OK Hi Cnt Ov*/
+#define XMR_OK_OV		(1L<<0)		/* Bit  0:	Frames Received Ok Ov */
+
+#define XMR_DEF_MSK		(XMR_OK_LO_OV | XMR_OK_HI_OV)
+
+/*	XM_TX_CNT_EV	32 bit r/o	Tx Counter Event Register */
+/*	XM_TX_EV_MSK	32 bit r/w	Tx Counter Event Mask */
+									/* Bit 31..26:	reserved */
+#define XMT_MAX_SZ_OV	(1L<<25)	/* Bit 25:	1024-MaxSize Tx Cnt Ov*/
+#define XMT_1023B_OV	(1L<<24)	/* Bit 24:	512-1023Byte Tx Cnt Ov*/
+#define XMT_511B_OV		(1L<<23)	/* Bit 23:	256-511 Byte Tx Cnt Ov*/
+#define XMT_255B_OV		(1L<<22)	/* Bit 22:	128-255 Byte Tx Cnt Ov*/
+#define XMT_127B_OV		(1L<<21)	/* Bit 21:	65-127 Byte Tx Cnt Ov */
+#define XMT_64B_OV		(1L<<20)	/* Bit 20:	64 Byte Tx Cnt Ov */
+#define XMT_UTIL_OV		(1L<<19)	/* Bit 19:	Tx Util Cnt Overflow */
+#define XMT_UTIL_UR		(1L<<18)	/* Bit 18:	Tx Util Cnt Underrun */
+#define XMT_CS_ERR_OV	(1L<<17)	/* Bit 17:	Tx Carr Sen Err Cnt Ov*/
+#define XMT_FIFO_UR_OV	(1L<<16)	/* Bit 16:	Tx FIFO Ur Ev Cnt Ov */
+#define XMT_EX_DEF_OV	(1L<<15)	/* Bit 15:	Tx Ex Deferall Cnt Ov */
+#define XMT_DEF			(1L<<14)	/* Bit 14:	Tx Deferred Cnt Ov */
+#define XMT_LAT_COL_OV	(1L<<13)	/* Bit 13:	Tx Late Col Cnt Ov */
+#define XMT_ABO_COL_OV	(1L<<12)	/* Bit 12:	Tx abo dueto Ex Col Ov*/
+#define XMT_MUL_COL_OV	(1L<<11)	/* Bit 11:	Tx Mult Col Cnt Ov */
+#define XMT_SNG_COL		(1L<<10)	/* Bit 10:	Tx Single Col Cnt Ov */
+#define XMT_MCTRL_OV	(1L<<9)		/* Bit  9:	Tx MAC Ctrl Counter Ov*/
+#define XMT_MPAUSE		(1L<<8)		/* Bit  8:	Tx Pause MAC Ctrl-F Ov*/
+#define XMT_BURST		(1L<<7)		/* Bit  7:	Tx Burst Event Cnt Ov */
+#define XMT_LONG		(1L<<6)		/* Bit  6:	Tx Long Frame Cnt Ov */
+#define XMT_UC_OK_OV	(1L<<5)		/* Bit  5:	Tx Unicast Cnt Ov */
+#define XMT_MC_OK_OV	(1L<<4)		/* Bit  4:	Tx Multicast Cnt Ov */
+#define XMT_BC_OK_OV	(1L<<3)		/* Bit  3:	Tx Broadcast Cnt Ov */
+#define XMT_OK_LO_OV	(1L<<2)		/* Bit  2:	Octets Tx OK Low CntOv*/
+#define XMT_OK_HI_OV	(1L<<1)		/* Bit  1:	Octets Tx OK Hi Cnt Ov*/
+#define XMT_OK_OV		(1L<<0)		/* Bit  0:	Frames Tx Ok Ov */
+
+#define XMT_DEF_MSK		(XMT_OK_LO_OV | XMT_OK_HI_OV)
+
+/*
+ * Receive Frame Status Encoding
+ */
+#define XMR_FS_LEN	(0x3fffUL<<18)	/* Bit 31..18:	Rx Frame Length */
+#define XMR_FS_2L_VLAN	(1L<<17)	/* Bit 17:	tagged wh 2Lev VLAN ID*/
+#define XMR_FS_1L_VLAN	(1L<<16)	/* Bit 16:	tagged wh 1Lev VLAN ID*/
+#define XMR_FS_BC		(1L<<15)	/* Bit 15:	Broadcast Frame */
+#define XMR_FS_MC		(1L<<14)	/* Bit 14:	Multicast Frame */
+#define XMR_FS_UC		(1L<<13)	/* Bit 13:	Unicast Frame */
+									/* Bit 12:	reserved */
+#define XMR_FS_BURST	(1L<<11)	/* Bit 11:	Burst Mode */
+#define XMR_FS_CEX_ERR	(1L<<10)	/* Bit 10:	Carrier Ext. Error */
+#define XMR_FS_802_3	(1L<<9)		/* Bit  9:	802.3 Frame */
+#define XMR_FS_COL_ERR	(1L<<8)		/* Bit  8:	Collision Error */
+#define XMR_FS_CAR_ERR	(1L<<7)		/* Bit  7:	Carrier Event Error */
+#define XMR_FS_LEN_ERR	(1L<<6)		/* Bit  6:	In-Range Length Error */
+#define XMR_FS_FRA_ERR	(1L<<5)		/* Bit  5:	Framing Error */
+#define XMR_FS_RUNT		(1L<<4)		/* Bit  4:	Runt Frame */
+#define XMR_FS_LNG_ERR	(1L<<3)		/* Bit  3:	Giant (Jumbo) Frame */
+#define XMR_FS_FCS_ERR	(1L<<2)		/* Bit  2:	Frame Check Sequ Err */
+#define XMR_FS_ERR		(1L<<1)		/* Bit  1:	Frame Error */
+#define XMR_FS_MCTRL	(1L<<0)		/* Bit  0:	MAC Control Packet */
+
+/*
+ * XMR_FS_ERR will be set if
+ *	XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT,
+ *	XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR
+ * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue
+ * XMR_FS_ERR unless the corresponding bit in the Receive Command
+ * Register is set.
+ */
+#define XMR_FS_ANY_ERR	XMR_FS_ERR
+
+/*----------------------------------------------------------------------------*/
+/*
+ * XMAC-PHY Registers, indirect addressed over the XMAC
+ */
+#define PHY_XMAC_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_XMAC_STAT		0x01	/* 16 bit r/w	PHY Status Register */
+#define PHY_XMAC_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_XMAC_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_XMAC_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_XMAC_AUNE_LP	0x05	/* 16 bit r/o	Link Partner Abi Reg */
+#define PHY_XMAC_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_XMAC_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_XMAC_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* 0x09 - 0x0e:		reserved */
+#define PHY_XMAC_EXT_STAT	0x0f	/* 16 bit r/o	Ext Status Register */
+#define PHY_XMAC_RES_ABI	0x10	/* 16 bit r/o	PHY Resolved Ability */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Broadcom-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_BCOM_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_BCOM_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_BCOM_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_BCOM_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_BCOM_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_BCOM_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_BCOM_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_BCOM_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_BCOM_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* Broadcom-specific registers */
+#define PHY_BCOM_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
+#define PHY_BCOM_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b - 0x0e:		reserved */
+#define PHY_BCOM_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_BCOM_P_EXT_CTRL	0x10	/* 16 bit r/w	PHY Extended Ctrl Reg */
+#define PHY_BCOM_P_EXT_STAT	0x11	/* 16 bit r/o	PHY Extended Stat Reg */
+#define PHY_BCOM_RE_CTR		0x12	/* 16 bit r/w	Receive Error Counter */
+#define PHY_BCOM_FC_CTR		0x13	/* 16 bit r/w	False Carrier Sense Cnt */
+#define PHY_BCOM_RNO_CTR	0x14	/* 16 bit r/w	Receiver NOT_OK Cnt */
+	/* 0x15 - 0x17:		reserved */
+#define PHY_BCOM_AUX_CTRL	0x18	/* 16 bit r/w	Auxiliary Control Reg */
+#define PHY_BCOM_AUX_STAT	0x19	/* 16 bit r/o	Auxiliary Stat Summary */
+#define PHY_BCOM_INT_STAT	0x1a	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_BCOM_INT_MASK	0x1b	/* 16 bit r/w	Interrupt Mask Reg */
+	/* 0x1c:		reserved */
+	/* 0x1d - 0x1f:		test registers */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Marvel-PHY Registers, indirect addressed over GMAC
+ */
+#define PHY_MARV_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_MARV_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_MARV_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_MARV_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_MARV_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_MARV_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_MARV_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_MARV_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_MARV_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* Marvel-specific registers */
+#define PHY_MARV_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Ctrl Reg */
+#define PHY_MARV_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b - 0x0e:		reserved */
+#define PHY_MARV_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_MARV_PHY_CTRL	0x10	/* 16 bit r/w	PHY Specific Ctrl Reg */
+#define PHY_MARV_PHY_STAT	0x11	/* 16 bit r/o	PHY Specific Stat Reg */
+#define PHY_MARV_INT_MASK	0x12	/* 16 bit r/w	Interrupt Mask Reg */
+#define PHY_MARV_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_MARV_EXT_CTRL	0x14	/* 16 bit r/w	Ext. PHY Specific Ctrl */
+#define PHY_MARV_RXE_CNT	0x15	/* 16 bit r/w	Receive Error Counter */
+#define PHY_MARV_EXT_ADR	0x16	/* 16 bit r/w	Ext. Ad. for Cable Diag. */
+	/* 0x17:		reserved */
+#define PHY_MARV_LED_CTRL	0x18	/* 16 bit r/w	LED Control Reg */
+#define PHY_MARV_LED_OVER	0x19	/* 16 bit r/w	Manual LED Override Reg */
+#define PHY_MARV_EXT_CTRL_2	0x1a	/* 16 bit r/w	Ext. PHY Specific Ctrl 2 */
+#define PHY_MARV_EXT_P_STAT	0x1b	/* 16 bit r/w	Ext. PHY Spec. Stat Reg */
+#define PHY_MARV_CABLE_DIAG	0x1c	/* 16 bit r/o	Cable Diagnostic Reg */
+	/* 0x1d - 0x1f:		reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * Level One-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_LONE_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_LONE_STAT		0x01	/* 16 bit r/o	PHY Status Register */
+#define PHY_LONE_ID0		0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_LONE_ID1		0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_LONE_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_LONE_AUNE_LP	0x05	/* 16 bit r/o	Link Part Ability Reg */
+#define PHY_LONE_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_LONE_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_LONE_NEPG_LP	0x08	/* 16 bit r/o	Next Page Link Partner */
+	/* Level One-specific registers */
+#define PHY_LONE_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg*/
+#define PHY_LONE_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b -0x0e:		reserved */
+#define PHY_LONE_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Reg */
+#define PHY_LONE_PORT_CFG	0x10	/* 16 bit r/w	Port Configuration Reg*/
+#define PHY_LONE_Q_STAT		0x11	/* 16 bit r/o	Quick Status Reg */
+#define PHY_LONE_INT_ENAB	0x12	/* 16 bit r/w	Interrupt Enable Reg */
+#define PHY_LONE_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
+#define PHY_LONE_LED_CFG	0x14	/* 16 bit r/w	LED Configuration Reg */
+#define PHY_LONE_PORT_CTRL	0x15	/* 16 bit r/w	Port Control Reg */
+#define PHY_LONE_CIM		0x16	/* 16 bit r/o	CIM Reg */
+	/* 0x17 -0x1c:		reserved */
+
+/*----------------------------------------------------------------------------*/
+/*
+ * National-PHY Registers, indirect addressed over XMAC
+ */
+#define PHY_NAT_CTRL		0x00	/* 16 bit r/w	PHY Control Register */
+#define PHY_NAT_STAT		0x01	/* 16 bit r/w	PHY Status Register */
+#define PHY_NAT_ID0			0x02	/* 16 bit r/o	PHY ID0 Register */
+#define PHY_NAT_ID1			0x03	/* 16 bit r/o	PHY ID1 Register */
+#define PHY_NAT_AUNE_ADV	0x04	/* 16 bit r/w	Auto-Neg. Advertisement */
+#define PHY_NAT_AUNE_LP		0x05	/* 16 bit r/o	Link Partner Ability Reg */
+#define PHY_NAT_AUNE_EXP	0x06	/* 16 bit r/o	Auto-Neg. Expansion Reg */
+#define PHY_NAT_NEPG		0x07	/* 16 bit r/w	Next Page Register */
+#define PHY_NAT_NEPG_LP		0x08	/* 16 bit r/o	Next Page Link Partner Reg */
+	/* National-specific registers */
+#define PHY_NAT_1000T_CTRL	0x09	/* 16 bit r/w	1000Base-T Control Reg */
+#define PHY_NAT_1000T_STAT	0x0a	/* 16 bit r/o	1000Base-T Status Reg */
+	/* 0x0b -0x0e:		reserved */
+#define PHY_NAT_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status Register */
+#define PHY_NAT_EXT_CTRL1	0x10	/* 16 bit r/o	Extended Control Reg1 */
+#define PHY_NAT_Q_STAT1		0x11	/* 16 bit r/o	Quick Status Reg1 */
+#define PHY_NAT_10B_OP		0x12	/* 16 bit r/o	10Base-T Operations Reg */
+#define PHY_NAT_EXT_CTRL2	0x13	/* 16 bit r/o	Extended Control Reg1 */
+#define PHY_NAT_Q_STAT2		0x14	/* 16 bit r/o	Quick Status Reg2 */
+	/* 0x15 -0x18:		reserved */
+#define PHY_NAT_PHY_ADDR	0x19	/* 16 bit r/o	PHY Address Register */
+
+
+/*----------------------------------------------------------------------------*/
+
+/*
+ * PHY bit definitions
+ * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are
+ * XMAC/Broadcom/LevelOne/National/Marvell-specific.
+ * All other are general.
+ */
+
+/*****  PHY_XMAC_CTRL	16 bit r/w	PHY Control Register *****/
+/*****  PHY_BCOM_CTRL	16 bit r/w	PHY Control Register *****/
+/*****  PHY_MARV_CTRL	16 bit r/w	PHY Status Register *****/
+/*****  PHY_LONE_CTRL	16 bit r/w	PHY Control Register *****/
+#define PHY_CT_RESET	(1<<15)	/* Bit 15: (sc)	clear all PHY related regs */
+#define PHY_CT_LOOP		(1<<14)	/* Bit 14:	enable Loopback over PHY */
+#define PHY_CT_SPS_LSB	(1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */
+#define PHY_CT_ANE		(1<<12)	/* Bit 12:	Auto-Negotiation Enabled */
+#define PHY_CT_PDOWN	(1<<11)	/* Bit 11: (BC,L1) Power Down Mode */
+#define PHY_CT_ISOL		(1<<10)	/* Bit 10: (BC,L1) Isolate Mode */
+#define PHY_CT_RE_CFG	(1<<9)	/* Bit  9: (sc) Restart Auto-Negotiation */
+#define PHY_CT_DUP_MD	(1<<8)	/* Bit  8:	Duplex Mode */
+#define PHY_CT_COL_TST	(1<<7)	/* Bit  7: (BC,L1) Collision Test enabled */
+#define PHY_CT_SPS_MSB	(1<<6)	/* Bit  6: (BC,L1) Speed select, upper bit */
+								/* Bit  5..0:	reserved */
+
+#define PHY_CT_SP1000	PHY_CT_SPS_MSB	/* enable speed of 1000 Mbps */
+#define PHY_CT_SP100	PHY_CT_SPS_LSB	/* enable speed of  100 Mbps */
+#define PHY_CT_SP10		(0)				/* enable speed of   10 Mbps */
+
+
+/*****  PHY_XMAC_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_BCOM_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_MARV_STAT	16 bit r/w	PHY Status Register *****/
+/*****  PHY_LONE_STAT	16 bit r/w	PHY Status Register *****/
+								/* Bit 15..9:	reserved */
+				/*	(BC/L1) 100/10 Mbps cap bits ignored*/
+#define PHY_ST_EXT_ST	(1<<8)	/* Bit  8:	Extended Status Present */
+								/* Bit  7:	reserved */
+#define PHY_ST_PRE_SUP	(1<<6)	/* Bit  6: (BC/L1) preamble suppression */
+#define PHY_ST_AN_OVER	(1<<5)	/* Bit  5:	Auto-Negotiation Over */
+#define PHY_ST_REM_FLT	(1<<4)	/* Bit  4:	Remote Fault Condition Occured */
+#define PHY_ST_AN_CAP	(1<<3)	/* Bit  3:	Auto-Negotiation Capability */
+#define PHY_ST_LSYNC	(1<<2)	/* Bit  2:	Link Synchronized */
+#define PHY_ST_JAB_DET	(1<<1)	/* Bit  1: (BC/L1) Jabber Detected */
+#define PHY_ST_EXT_REG	(1<<0)	/* Bit  0:	Extended Register available */
+
+
+/*****	PHY_XMAC_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_BCOM_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_MARV_ID1		16 bit r/o	PHY ID1 Register */
+/*****	PHY_LONE_ID1		16 bit r/o	PHY ID1 Register */
+#define PHY_I1_OUI_MSK	(0x3f<<10)	/* Bit 15..10:	Organization Unique ID */
+#define PHY_I1_MOD_NUM	(0x3f<<4)	/* Bit  9.. 4:	Model Number */
+#define PHY_I1_REV_MSK	0x0f		/* Bit  3.. 0:	Revision Number */
+
+/* different Broadcom PHY Ids */
+#define PHY_BCOM_ID1_A1		0x6041
+#define PHY_BCOM_ID1_B2		0x6043
+#define PHY_BCOM_ID1_C0		0x6044
+#define PHY_BCOM_ID1_C5		0x6047
+
+
+/*****  PHY_XMAC_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_XMAC_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+#define PHY_AN_NXT_PG	(1<<15)	/* Bit 15:	Request Next Page */
+#define PHY_X_AN_ACK	(1<<14)	/* Bit 14: (ro)	Acknowledge Received */
+#define PHY_X_AN_RFB	(3<<12)	/* Bit 13..12:	Remote Fault Bits */
+								/* Bit 11.. 9:	reserved */
+#define PHY_X_AN_PAUSE	(3<<7)	/* Bit  8.. 7:	Pause Bits */
+#define PHY_X_AN_HD		(1<<6)	/* Bit  6:	Half Duplex */
+#define PHY_X_AN_FD		(1<<5)	/* Bit  5:	Full Duplex */
+								/* Bit  4.. 0:	reserved */
+
+/*****  PHY_BCOM_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_BCOM_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_B_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_B_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
+#define PHY_B_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_B_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/*****  PHY_LONE_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_LONE_AUNE_LP	16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_L_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_L_AN_ASP	(1<<11)	/* Bit 11:	Asymmetric Pause */
+#define PHY_L_AN_PC		(1<<10)	/* Bit 10:	Pause Capable */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_L_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/*****  PHY_NAT_AUNE_ADV	16 bit r/w	Auto-Negotiation Advertisement *****/
+/*****  PHY_NAT_AUNE_LP		16 bit r/o	Link Partner Ability Reg *****/
+/*	PHY_AN_NXT_PG		(see XMAC) Bit 15:	Request Next Page */
+								/* Bit 14:	reserved */
+#define PHY_N_AN_RF		(1<<13)	/* Bit 13:	Remote Fault */
+								/* Bit 12:	reserved */
+#define PHY_N_AN_100F	(1<<11)	/* Bit 11:	100Base-T2 FD Support */
+#define PHY_N_AN_100H	(1<<10)	/* Bit 10:	100Base-T2 HD Support */
+								/* Bit  9..5:	100/10 BT cap bits ingnored */
+#define PHY_N_AN_SEL	0x1f	/* Bit 4..0:	Selector Field, 00001=Ethernet*/
+
+/* field type definition for PHY_x_AN_SEL */
+#define PHY_SEL_TYPE	0x01	/* 00001 = Ethernet */
+
+/*****  PHY_XMAC_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+								/* Bit 15..4:	reserved */
+#define PHY_ANE_LP_NP	(1<<3)	/* Bit  3:	Link Partner can Next Page */
+#define PHY_ANE_LOC_NP	(1<<2)	/* Bit  2:	Local PHY can Next Page */
+#define PHY_ANE_RX_PG	(1<<1)	/* Bit  1:	Page Received */
+								/* Bit  0:	reserved */
+
+/*****  PHY_BCOM_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+/*****  PHY_LONE_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+/*****  PHY_MARV_AUNE_EXP	16 bit r/o	Auto-Negotiation Expansion Reg *****/
+								/* Bit 15..5:	reserved */
+#define PHY_ANE_PAR_DF	(1<<4)	/* Bit  4:	Parallel Detection Fault */
+/*	PHY_ANE_LP_NP		(see XMAC) Bit  3:	Link Partner can Next Page */
+/*	PHY_ANE_LOC_NP		(see XMAC) Bit  2:	Local PHY can Next Page */
+/*	PHY_ANE_RX_PG		(see XMAC) Bit  1:	Page Received */
+#define PHY_ANE_LP_CAP	(1<<0)	/* Bit  0:	Link Partner Auto-Neg. Cap. */ 	
+
+/*****  PHY_XMAC_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_BCOM_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_LONE_NEPG		16 bit r/w	Next Page Register *****/
+/*****  PHY_XMAC_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+/*****  PHY_BCOM_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+/*****  PHY_LONE_NEPG_LP	16 bit r/o	Next Page Link Partner *****/
+#define PHY_NP_MORE		(1<<15)	/* Bit 15:	More, Next Pages to follow */
+#define PHY_NP_ACK1		(1<<14)	/* Bit 14: (ro)	Ack1, for receiving a message */
+#define PHY_NP_MSG_VAL	(1<<13)	/* Bit 13:	Message Page valid */
+#define PHY_NP_ACK2		(1<<12)	/* Bit 12:	Ack2, comply with msg content */
+#define PHY_NP_TOG		(1<<11)	/* Bit 11:	Toggle Bit, ensure sync */
+#define PHY_NP_MSG		0x07ff	/* Bit 10..0:	Message from/to Link Partner */
+
+/*
+ * XMAC-Specific
+ */
+/*****  PHY_XMAC_EXT_STAT	16 bit r/w	Extended Status Register *****/
+#define PHY_X_EX_FD		(1<<15)	/* Bit 15:	Device Supports Full Duplex */
+#define PHY_X_EX_HD		(1<<14)	/* Bit 14:	Device Supports Half Duplex */
+								/* Bit 13..0:	reserved */
+
+/*****  PHY_XMAC_RES_ABI	16 bit r/o	PHY Resolved Ability *****/
+								/* Bit 15..9:	reserved */