Merge tag 'v3.15-rc1' into patchwork

Linux 3.15-rc1

* tag 'v3.15-rc1': (12180 commits)
  Linux 3.15-rc1
  mm: Initialize error in shmem_file_aio_read()
  cifs: Use min_t() when comparing "size_t" and "unsigned long"
  sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
  powerpc: Don't try to set LPCR unless we're in hypervisor mode
  futex: update documentation for ordering guarantees
  ceph: fix pr_fmt() redefinition
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  ...

1 files changed, 0 insertions, 52 deletions

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f8c90ea7510..34088d60da7 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -25,58 +25,6 @@
 #define BRCM_PHY_REV(phydev) \
 	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
 
-
-#define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
-#define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
-#define MII_BCM54XX_ECR_IF	0x0800	/* Interrupt force */
-
-#define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
-#define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
-
-#define MII_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
-#define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
-#define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
-#define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
-
-#define MII_BCM54XX_AUX_CTL	0x18	/* Auxiliary control register */
-#define MII_BCM54XX_ISR		0x1a	/* BCM54xx interrupt status register */
-#define MII_BCM54XX_IMR		0x1b	/* BCM54xx interrupt mask register */
-#define MII_BCM54XX_INT_CRCERR	0x0001	/* CRC error */
-#define MII_BCM54XX_INT_LINK	0x0002	/* Link status changed */
-#define MII_BCM54XX_INT_SPEED	0x0004	/* Link speed change */
-#define MII_BCM54XX_INT_DUPLEX	0x0008	/* Duplex mode changed */
-#define MII_BCM54XX_INT_LRS	0x0010	/* Local receiver status changed */
-#define MII_BCM54XX_INT_RRS	0x0020	/* Remote receiver status changed */
-#define MII_BCM54XX_INT_SSERR	0x0040	/* Scrambler synchronization error */
-#define MII_BCM54XX_INT_UHCD	0x0080	/* Unsupported HCD negotiated */
-#define MII_BCM54XX_INT_NHCD	0x0100	/* No HCD */
-#define MII_BCM54XX_INT_NHCDL	0x0200	/* No HCD link */
-#define MII_BCM54XX_INT_ANPR	0x0400	/* Auto-negotiation page received */
-#define MII_BCM54XX_INT_LC	0x0800	/* All counters below 128 */
-#define MII_BCM54XX_INT_HC	0x1000	/* Counter above 32768 */
-#define MII_BCM54XX_INT_MDIX	0x2000	/* MDIX status change */
-#define MII_BCM54XX_INT_PSERR	0x4000	/* Pair swap error */
-
-#define MII_BCM54XX_SHD		0x1c	/* 0x1c shadow registers */
-#define MII_BCM54XX_SHD_WRITE	0x8000
-#define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
-#define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
-
-/*
- * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
- */
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
-#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
-
-#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
-
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-
-
 /*
  * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
  * BCM5482, and possibly some others.