Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  r8169: revert "r8169: read MAC address from EEPROM on init (2nd attempt)"
  r8169: use hardware auto-padding.
  igb: remove ASPM L0s workaround
  netxen: remove old flash check.
  mv643xx_eth: fix unicast address filter corruption on mtu change
  xfrm: Fix xfrm_state_find() wrt. wildcard source address.
  emac: Fix clock control for 405EX and 405EXr chips
  ixgbe: fix multiple unicast address support
  via-velocity: Fix DMA mapping length errors on transmit.
  qlge: bugfix: Pad outbound frames smaller than 60 bytes.
  qlge: bugfix: Move netif_napi_del() to common call point.
  qlge: bugfix: Tell hw to strip vlan header.
  qlge: bugfix: Increase filter on inbound csum.
  dnet: replace obsolete *netif_rx_* functions with *napi_*
  net: Add be2net driver.
  dnet: Fix warnings on 64-bit.
  dnet: Dave DNET ethernet controller driver (updated)
  ipv6:  Fix BUG when disabled ipv6 module is unloaded
  bnx2x: Using DMAE to initialize the chip
  bnx2x: Casting page alignment
  ...

1 files changed, 2 insertions, 24 deletions

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index a50db5398fa..9dd13ad12ce 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1023,11 +1023,10 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	struct net_device *netdev;
 	struct igb_adapter *adapter;
 	struct e1000_hw *hw;
-	struct pci_dev *us_dev;
 	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
 	unsigned long mmio_start, mmio_len;
-	int i, err, pci_using_dac, pos;
-	u16 eeprom_data = 0, state = 0;
+	int i, err, pci_using_dac;
+	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
 	u32 part_num;
 	int bars, need_ioport;
@@ -1062,27 +1061,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		}
 	}
 
-	/* 82575 requires that the pci-e link partner disable the L0s state */
-	switch (pdev->device) {
-	case E1000_DEV_ID_82575EB_COPPER:
-	case E1000_DEV_ID_82575EB_FIBER_SERDES:
-	case E1000_DEV_ID_82575GB_QUAD_COPPER:
-		us_dev = pdev->bus->self;
-		pos = pci_find_capability(us_dev, PCI_CAP_ID_EXP);
-		if (pos) {
-			pci_read_config_word(us_dev, pos + PCI_EXP_LNKCTL,
-			                     &state);
-			state &= ~PCIE_LINK_STATE_L0S;
-			pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
-			                      state);
-			dev_info(&pdev->dev,
-				 "Disabling ASPM L0s upstream switch port %s\n",
-				 pci_name(us_dev));
-		}
-	default:
-		break;
-	}
-
 	err = pci_request_selected_regions(pdev, bars, igb_driver_name);
 	if (err)
 		goto err_pci_reg;