diff options
| author | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2009-10-06 17:36:55 +0200 |
|---|---|---|
| committer | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2009-10-06 17:36:55 +0200 |
| commit | d94e5fcbf1420366dcb4102bafe04dbcfc0d0d4b (patch) | |
| tree | a9b7de7df6da5c3132cc68169b9c47ba288ccd42 /drivers/net/igb/e1000_phy.c | |
| parent | d55651168a20078a94597a297d5cdfd807bf07b6 (diff) | |
| parent | 374576a8b6f865022c0fd1ca62396889b23d66dd (diff) | |
Merge commit 'v2.6.32-rc3'
Diffstat (limited to 'drivers/net/igb/e1000_phy.c')
| -rw-r--r-- | drivers/net/igb/e1000_phy.c | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index f50fac25be4..ee460600e74 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -735,7 +735,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) * other: No software override. The flow control configuration * in the EEPROM is used. */ - switch (hw->fc.type) { + switch (hw->fc.current_mode) { case e1000_fc_none: /* * Flow control (RX & TX) is completely disabled by a @@ -992,7 +992,7 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, u32 ctrl; /* Turn off flow control when forcing speed/duplex */ - hw->fc.type = e1000_fc_none; + hw->fc.current_mode = e1000_fc_none; /* Force speed/duplex on the mac */ ctrl = rd32(E1000_CTRL); @@ -1565,9 +1565,12 @@ out: **/ s32 igb_phy_sw_reset(struct e1000_hw *hw) { - s32 ret_val; + s32 ret_val = 0; u16 phy_ctrl; + if (!(hw->phy.ops.read_reg)) + goto out; + ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); if (ret_val) goto out; |