Merge tag 'v3.15-rc1' into patchwork

Linux 3.15-rc1

* tag 'v3.15-rc1': (12180 commits)
  Linux 3.15-rc1
  mm: Initialize error in shmem_file_aio_read()
  cifs: Use min_t() when comparing "size_t" and "unsigned long"
  sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
  powerpc: Don't try to set LPCR unless we're in hypervisor mode
  futex: update documentation for ordering guarantees
  ceph: fix pr_fmt() redefinition
  vti: don't allow to add the same tunnel twice
  gre: don't allow to add the same tunnel twice
  drivers: net: xen-netfront: fix array initialization bug
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  pktgen: be friendly to LLTX devices
  r8152: check RTL8152_UNPLUG
  net: sun4i-emac: add promiscuous support
  net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  blackfin: cleanup board files
  bf609: clock: drop unused clock bit set/clear functions
  Blackfin: bf537: rename "CONFIG_ADT75"
  ...

1 files changed, 2 insertions, 74 deletions

diff --git a/drivers/net/ethernet/intel/igb/e1000_phy.c b/drivers/net/ethernet/intel/igb/e1000_phy.c
index ad2b74d9513..4009bbab740 100644
--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
+++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) Gigabit Ethernet Linux driver
-  Copyright(c) 2007-2013 Intel Corporation.
+  Copyright(c) 2007-2014 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -13,8 +13,7 @@
   more details.
 
   You should have received a copy of the GNU General Public License along with
-  this program; if not, write to the Free Software Foundation, Inc.,
-  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+  this program; if not, see <http://www.gnu.org/licenses/>.
 
   The full GNU General Public License is included in this distribution in
   the file called "COPYING".
@@ -394,77 +393,6 @@ s32 igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data)
 }
 
 /**
- *  e1000_write_sfp_data_byte - Writes SFP module data.
- *  @hw: pointer to the HW structure
- *  @offset: byte location offset to write to
- *  @data: data to write
- *
- *  Writes one byte to SFP module data stored
- *  in SFP resided EEPROM memory or SFP diagnostic area.
- *  Function should be called with
- *  E1000_I2CCMD_SFP_DATA_ADDR(<byte offset>) for SFP module database access
- *  E1000_I2CCMD_SFP_DIAG_ADDR(<byte offset>) for SFP diagnostics parameters
- *  access
- **/
-s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data)
-{
-	u32 i = 0;
-	u32 i2ccmd = 0;
-	u32 data_local = 0;
-
-	if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) {
-		hw_dbg("I2CCMD command address exceeds upper limit\n");
-		return -E1000_ERR_PHY;
-	}
-	/* The programming interface is 16 bits wide
-	 * so we need to read the whole word first
-	 * then update appropriate byte lane and write
-	 * the updated word back.
-	 */
-	/* Set up Op-code, EEPROM Address,in the I2CCMD
-	 * register. The MAC will take care of interfacing
-	 * with an EEPROM to write the data given.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_READ);
-	/* Set a command to read single word */
-	wr32(E1000_I2CCMD, i2ccmd);
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		udelay(50);
-		/* Poll the ready bit to see if lastly
-		 * launched I2C operation completed
-		 */
-		i2ccmd = rd32(E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY) {
-			/* Check if this is READ or WRITE phase */
-			if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) ==
-			    E1000_I2CCMD_OPCODE_READ) {
-				/* Write the selected byte
-				 * lane and update whole word
-				 */
-				data_local = i2ccmd & 0xFF00;
-				data_local |= data;
-				i2ccmd = ((offset <<
-					E1000_I2CCMD_REG_ADDR_SHIFT) |
-					E1000_I2CCMD_OPCODE_WRITE | data_local);
-				wr32(E1000_I2CCMD, i2ccmd);
-			} else {
-				break;
-			}
-		}
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		hw_dbg("I2CCMD Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		hw_dbg("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-	return 0;
-}
-
-/**
  *  igb_read_phy_reg_igp - Read igp PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read