Merge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

1 files changed, 110 insertions, 136 deletions

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index d1367789976..05b0b2f9c54 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		 * packet, also make sure the frame isn't just CRC only */
 		if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 			/* All receives must fit into a single buffer */
-			ndev_dbg(netdev, "%s: Receive packet consumed "
-				 "multiple buffers\n", netdev->name);
+			e_dbg("%s: Receive packet consumed multiple buffers\n",
+			      netdev->name);
 			/* recycle */
 			buffer_info->skb = skb;
 			goto next_desc;
@@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter)
 	unsigned int i = tx_ring->next_to_clean;
 	unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 	struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
-	struct net_device *netdev = adapter->netdev;
 
 	/* detected Tx unit hang */
-	ndev_err(netdev,
-		 "Detected Tx Unit Hang:\n"
-		 "  TDH                  <%x>\n"
-		 "  TDT                  <%x>\n"
-		 "  next_to_use          <%x>\n"
-		 "  next_to_clean        <%x>\n"
-		 "buffer_info[next_to_clean]:\n"
-		 "  time_stamp           <%lx>\n"
-		 "  next_to_watch        <%x>\n"
-		 "  jiffies              <%lx>\n"
-		 "  next_to_watch.status <%x>\n",
-		 readl(adapter->hw.hw_addr + tx_ring->head),
-		 readl(adapter->hw.hw_addr + tx_ring->tail),
-		 tx_ring->next_to_use,
-		 tx_ring->next_to_clean,
-		 tx_ring->buffer_info[eop].time_stamp,
-		 eop,
-		 jiffies,
-		 eop_desc->upper.fields.status);
+	e_err("Detected Tx Unit Hang:\n"
+	      "  TDH                  <%x>\n"
+	      "  TDT                  <%x>\n"
+	      "  next_to_use          <%x>\n"
+	      "  next_to_clean        <%x>\n"
+	      "buffer_info[next_to_clean]:\n"
+	      "  time_stamp           <%lx>\n"
+	      "  next_to_watch        <%x>\n"
+	      "  jiffies              <%lx>\n"
+	      "  next_to_watch.status <%x>\n",
+	      readl(adapter->hw.hw_addr + tx_ring->head),
+	      readl(adapter->hw.hw_addr + tx_ring->tail),
+	      tx_ring->next_to_use,
+	      tx_ring->next_to_clean,
+	      tx_ring->buffer_info[eop].time_stamp,
+	      eop,
+	      jiffies,
+	      eop_desc->upper.fields.status);
 }
 
 /**
@@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		buffer_info->dma = 0;
 
 		if (!(staterr & E1000_RXD_STAT_EOP)) {
-			ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
-				 "up the full packet\n", netdev->name);
+			e_dbg("%s: Packet Split buffers didn't pick up the "
+			      "full packet\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		length = le16_to_cpu(rx_desc->wb.middle.length0);
 
 		if (!length) {
-			ndev_dbg(netdev, "%s: Last part of the packet spanning"
-				 " multiple descriptors\n", netdev->name);
+			e_dbg("%s: Last part of the packet spanning multiple "
+			      "descriptors\n", netdev->name);
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
@@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 
 		/* eth type trans needs skb->data to point to something */
 		if (!pskb_may_pull(skb, ETH_HLEN)) {
-			ndev_err(netdev, "pskb_may_pull failed.\n");
+			e_err("pskb_may_pull failed.\n");
 			dev_kfree_skb(skb);
 			goto next_desc;
 		}
@@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter)
 	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
 			  netdev);
 	if (err) {
-		ndev_err(netdev,
-		       "Unable to allocate %s interrupt (return: %d)\n",
-			adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
-			err);
+		e_err("Unable to allocate %s interrupt (return: %d)\n",
+		      adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",	err);
 		if (adapter->flags & FLAG_MSI_ENABLED)
 			pci_disable_msi(adapter->pdev);
 	}
@@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
 	return 0;
 err:
 	vfree(tx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
@@ -1450,8 +1445,7 @@ err_pages:
 	}
 err:
 	vfree(rx_ring->buffer_info);
-	ndev_err(adapter->netdev,
-	"Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the transmit descriptor ring\n");
 	return err;
 }
 
@@ -2450,13 +2444,13 @@ void e1000e_reset(struct e1000_adapter *adapter)
 	 * For parts with AMT enabled, let the firmware know
 	 * that the network interface is in control
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	ew32(WUC, 0);
 
 	if (mac->ops.init_hw(hw))
-		ndev_err(adapter->netdev, "Hardware Error\n");
+		e_err("Hardware Error\n");
 
 	e1000_update_mng_vlan(adapter);
 
@@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
 	return 0;
 
 err:
-	ndev_err(netdev, "Unable to allocate memory for queues\n");
+	e_err("Unable to allocate memory for queues\n");
 	kfree(adapter->rx_ring);
 	kfree(adapter->tx_ring);
 	return -ENOMEM;
@@ -2640,8 +2634,7 @@ static int e1000_open(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now open
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_get_hw_control(adapter);
 
 	/*
@@ -2719,8 +2712,7 @@ static int e1000_close(struct net_device *netdev)
 	 * If AMT is enabled, let the firmware know that the network
 	 * interface is now closed
 	 */
-	if ((adapter->flags & FLAG_HAS_AMT) &&
-	    e1000e_check_mng_mode(&adapter->hw))
+	if (adapter->flags & FLAG_HAS_AMT)
 		e1000_release_hw_control(adapter);
 
 	return 0;
@@ -2917,8 +2909,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 		ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
 		ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
 		if (ret_val)
-			ndev_warn(adapter->netdev,
-				  "Error reading PHY register\n");
+			e_warn("Error reading PHY register\n");
 	} else {
 		/*
 		 * Do not read PHY registers if link is not up
@@ -2943,18 +2934,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter)
 static void e1000_print_link_info(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
 	u32 ctrl = er32(CTRL);
 
-	ndev_info(netdev,
-		"Link is Up %d Mbps %s, Flow Control: %s\n",
-		adapter->link_speed,
-		(adapter->link_duplex == FULL_DUPLEX) ?
-				"Full Duplex" : "Half Duplex",
-		((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
-				"RX/TX" :
-		((ctrl & E1000_CTRL_RFCE) ? "RX" :
-		((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
+	e_info("Link is Up %d Mbps %s, Flow Control: %s\n",
+	       adapter->link_speed,
+	       (adapter->link_duplex == FULL_DUPLEX) ?
+	                        "Full Duplex" : "Half Duplex",
+	       ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+	                        "RX/TX" :
+	       ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+	       ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
 }
 
 static bool e1000_has_link(struct e1000_adapter *adapter)
@@ -2994,8 +2983,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter)
 	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
-		ndev_info(adapter->netdev,
-			  "Gigabit has been disabled, downgrading speed\n");
+		e_info("Gigabit has been disabled, downgrading speed\n");
 	}
 
 	return link_active;
@@ -3096,8 +3084,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 				switch (adapter->link_speed) {
 				case SPEED_10:
 				case SPEED_100:
-					ndev_info(netdev,
-					"10/100 speed: disabling TSO\n");
+					e_info("10/100 speed: disabling TSO\n");
 					netdev->features &= ~NETIF_F_TSO;
 					netdev->features &= ~NETIF_F_TSO6;
 					break;
@@ -3130,7 +3117,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 		if (netif_carrier_ok(netdev)) {
 			adapter->link_speed = 0;
 			adapter->link_duplex = 0;
-			ndev_info(netdev, "Link is Down\n");
+			e_info("Link is Down\n");
 			netif_carrier_off(netdev);
 			netif_tx_stop_all_queues(netdev);
 			if (!test_bit(__E1000_DOWN, &adapter->state))
@@ -3604,8 +3591,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 
 			pull_size = min((unsigned int)4, skb->data_len);
 			if (!__pskb_pull_tail(skb, pull_size)) {
-				ndev_err(netdev,
-					 "__pskb_pull_tail failed.\n");
+				e_err("__pskb_pull_tail failed.\n");
 				dev_kfree_skb_any(skb);
 				return NETDEV_TX_OK;
 			}
@@ -3737,25 +3723,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 
 	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
 	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		ndev_err(netdev, "Invalid MTU setting\n");
+		e_err("Invalid MTU setting\n");
 		return -EINVAL;
 	}
 
 	/* Jumbo frame size limits */
 	if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
 		if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 		if (adapter->hw.phy.type == e1000_phy_ife) {
-			ndev_err(netdev, "Jumbo Frames not supported.\n");
+			e_err("Jumbo Frames not supported.\n");
 			return -EINVAL;
 		}
 	}
 
 #define MAX_STD_JUMBO_FRAME_SIZE 9234
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		ndev_err(netdev, "MTU > 9216 not supported.\n");
+		e_err("MTU > 9216 not supported.\n");
 		return -EINVAL;
 	}
 
@@ -3792,8 +3778,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 		adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
 					 + ETH_FCS_LEN;
 
-	ndev_info(netdev, "changing MTU from %d to %d\n",
-		netdev->mtu, new_mtu);
+	e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 
 	if (netif_running(netdev))
@@ -4006,10 +3991,7 @@ static int e1000_resume(struct pci_dev *pdev)
 	pci_restore_state(pdev);
 	e1000e_disable_l1aspm(pdev);
 
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot enable PCI device from suspend\n");
@@ -4043,7 +4025,7 @@ static int e1000_resume(struct pci_dev *pdev)
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	return 0;
@@ -4111,10 +4093,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
 	int err;
 
 	e1000e_disable_l1aspm(pdev);
-	if (adapter->need_ioport)
-		err = pci_enable_device(pdev);
-	else
-		err = pci_enable_device_mem(pdev);
+	err = pci_enable_device_mem(pdev);
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
@@ -4162,8 +4141,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 }
@@ -4175,36 +4153,40 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 	u32 pba_num;
 
 	/* print bus type/speed/width info */
-	ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
-		  "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		  /* bus width */
-		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
-		  "Width x1"),
-		  /* MAC address */
-		  netdev->dev_addr[0], netdev->dev_addr[1],
-		  netdev->dev_addr[2], netdev->dev_addr[3],
-		  netdev->dev_addr[4], netdev->dev_addr[5]);
-	ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
-		  (hw->phy.type == e1000_phy_ife)
-		   ? "10/100" : "1000");
+	e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       /* bus width */
+	       ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+	        "Width x1"),
+	       /* MAC address */
+	       netdev->dev_addr[0], netdev->dev_addr[1],
+	       netdev->dev_addr[2], netdev->dev_addr[3],
+	       netdev->dev_addr[4], netdev->dev_addr[5]);
+	e_info("Intel(R) PRO/%s Network Connection\n",
+	       (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
 	e1000e_read_pba_num(hw, &pba_num);
-	ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-		  hw->mac.type, hw->phy.type,
-		  (pba_num >> 8), (pba_num & 0xff));
+	e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
+	       hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
 }
 
-/**
- * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Returns true if an adapters needs ioport resources
- **/
-static int e1000e_is_need_ioport(struct pci_dev *pdev)
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
 {
-	switch (pdev->device) {
-	/* Currently there are no adapters that need ioport resources */
-	default:
-		return false;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
+	u16 buf = 0;
+
+	if (hw->mac.type != e1000_82573)
+		return;
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+	if (!(le16_to_cpu(buf) & (1 << 0))) {
+		/* Deep Smart Power Down (DSPD) */
+		e_warn("Warning: detected DSPD enabled in EEPROM\n");
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
+	if (le16_to_cpu(buf) & (3 << 2)) {
+		/* ASPM enable */
+		e_warn("Warning: detected ASPM enabled in EEPROM\n");
 	}
 }
 
@@ -4233,19 +4215,10 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	int i, err, pci_using_dac;
 	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = E1000_EEPROM_APME;
-	int bars, need_ioport;
 
 	e1000e_disable_l1aspm(pdev);
 
-	/* do not allocate ioport bars when not needed */
-	need_ioport = e1000e_is_need_ioport(pdev);
-	if (need_ioport) {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
-		err = pci_enable_device(pdev);
-	} else {
-		bars = pci_select_bars(pdev, IORESOURCE_MEM);
-		err = pci_enable_device_mem(pdev);
-	}
+	err = pci_enable_device_mem(pdev);
 	if (err)
 		return err;
 
@@ -4268,7 +4241,9 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		}
 	}
 
-	err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
+	err = pci_request_selected_regions(pdev,
+	                                  pci_select_bars(pdev, IORESOURCE_MEM),
+	                                  e1000e_driver_name);
 	if (err)
 		goto err_pci_reg;
 
@@ -4293,8 +4268,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.adapter = adapter;
 	adapter->hw.mac.type = ei->mac;
 	adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-	adapter->bars = bars;
-	adapter->need_ioport = need_ioport;
 
 	mmio_start = pci_resource_start(pdev, 0);
 	mmio_len = pci_resource_len(pdev, 0);
@@ -4366,8 +4339,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	}
 
 	if (e1000_check_reset_block(&adapter->hw))
-		ndev_info(netdev,
-			  "PHY reset is blocked due to SOL/IDER session.\n");
+		e_info("PHY reset is blocked due to SOL/IDER session.\n");
 
 	netdev->features = NETIF_F_SG |
 			   NETIF_F_HW_CSUM |
@@ -4411,25 +4383,26 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
 			break;
 		if (i == 2) {
-			ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
+			e_err("The NVM Checksum Is Not Valid\n");
 			err = -EIO;
 			goto err_eeprom;
 		}
 	}
 
+	e1000_eeprom_checks(adapter);
+
 	/* copy the MAC address out of the NVM */
 	if (e1000e_read_mac_addr(&adapter->hw))
-		ndev_err(netdev, "NVM Read Error while reading MAC address\n");
+		e_err("NVM Read Error while reading MAC address\n");
 
 	memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
 
 	if (!is_valid_ether_addr(netdev->perm_addr)) {
-		ndev_err(netdev, "Invalid MAC Address: "
-			 "%02x:%02x:%02x:%02x:%02x:%02x\n",
-			 netdev->perm_addr[0], netdev->perm_addr[1],
-			 netdev->perm_addr[2], netdev->perm_addr[3],
-			 netdev->perm_addr[4], netdev->perm_addr[5]);
+		e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+		      netdev->perm_addr[0], netdev->perm_addr[1],
+		      netdev->perm_addr[2], netdev->perm_addr[3],
+		      netdev->perm_addr[4], netdev->perm_addr[5]);
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -4499,8 +4472,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	 * is up.  For all other cases, let the f/w know that the h/w is now
 	 * under the control of the driver.
 	 */
-	if (!(adapter->flags & FLAG_HAS_AMT) ||
-	    !e1000e_check_mng_mode(&adapter->hw))
+	if (!(adapter->flags & FLAG_HAS_AMT))
 		e1000_get_hw_control(adapter);
 
 	/* tell the stack to leave us alone until e1000_open() is called */
@@ -4517,24 +4489,25 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	return 0;
 
 err_register:
-err_hw_init:
-	e1000_release_hw_control(adapter);
+	if (!(adapter->flags & FLAG_HAS_AMT))
+		e1000_release_hw_control(adapter);
 err_eeprom:
 	if (!e1000_check_reset_block(&adapter->hw))
 		e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
 
-	if (adapter->hw.flash_address)
-		iounmap(adapter->hw.flash_address);
-
-err_flashmap:
 	kfree(adapter->tx_ring);
 	kfree(adapter->rx_ring);
 err_sw_init:
+	if (adapter->hw.flash_address)
+		iounmap(adapter->hw.flash_address);
+err_flashmap:
 	iounmap(adapter->hw.hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev, bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -4582,7 +4555,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	iounmap(adapter->hw.hw_addr);
 	if (adapter->hw.flash_address)
 		iounmap(adapter->hw.flash_address);
-	pci_release_selected_regions(pdev, adapter->bars);
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 
 	free_netdev(netdev);