Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd

Pull MTD update from David Woodhouse:

 - Lots of cleanups from Artem, including deletion of some obsolete
   drivers

 - Support partitions larger than 4GiB in device tree

 - Support for new SPI chips

* tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits)
  mtd: omap2: Use module_platform_driver()
  mtd: bf5xx_nand: Use module_platform_driver()
  mtd: denali_dt: Remove redundant use of of_match_ptr
  mtd: denali_dt: Change return value to fix smatch warning
  mtd: denali_dt: Use module_platform_driver()
  mtd: denali_dt: Fix incorrect error check
  mtd: nand: subpage write support for hardware based ECC schemes
  mtd: omap2: use msecs_to_jiffies()
  mtd: nand_ids: use size macros
  mtd: nand_ids: improve LEGACY_ID_NAND macro a bit
  mtd: add 4 Toshiba nand chips for the full-id case
  mtd: add the support to parse out the full-id nand type
  mtd: add new fields to nand_flash_dev{}
  mtd: sh_flctl: Use of_match_ptr() macro
  mtd: gpio: Use of_match_ptr() macro
  mtd: gpio: Use devm_kzalloc()
  mtd: davinci_nand: Use of_match_ptr()
  mtd: dataflash: Use of_match_ptr() macro
  mtd: remove h720x flash support
  mtd: onenand: remove OneNAND simulator
  ...

77 files changed, 495 insertions, 8057 deletions

diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 557bec599f4..5fab4e6e830 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -157,19 +157,6 @@ config MTD_BCM47XX_PARTS
 
 comment "User Modules And Translation Layers"
 
-config MTD_CHAR
-	tristate "Direct char device access to MTD devices"
-	help
-	  This provides a character device for each MTD device present in
-	  the system, allowing the user to read and write directly to the
-	  memory chips, and also use ioctl() to obtain information about
-	  the device, or to erase parts of it.
-
-config HAVE_MTD_OTP
-	bool
-	help
-	  Enable access to OTP regions using MTD_CHAR.
-
 config MTD_BLKDEVS
 	tristate "Common interface to block layer for MTD 'translation layers'"
 	depends on BLOCK
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 18a38e55b2f..4cfb31e6c96 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -4,7 +4,7 @@
 
 # Core functionality.
 obj-$(CONFIG_MTD)		+= mtd.o
-mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o
+mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
 
 obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
 obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
 obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
 
 # 'Users' - code which presents functionality to userspace.
-obj-$(CONFIG_MTD_CHAR)		+= mtdchar.o
 obj-$(CONFIG_MTD_BLKDEVS)	+= mtd_blkdevs.o
 obj-$(CONFIG_MTD_BLOCK)		+= mtdblock.o
 obj-$(CONFIG_MTD_BLOCK_RO)	+= mtdblock_ro.o
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index c219e3d098d..e4696b37f3d 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -146,7 +146,6 @@ config MTD_CFI_I8
 config MTD_OTP
 	bool "Protection Registers aka one-time programmable (OTP) bits"
 	depends on MTD_CFI_ADV_OPTIONS
-	select HAVE_MTD_OTP
 	default n
 	help
 	  This enables support for reading, writing and locking so called
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 12311f506ca..2a4d55e4b36 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -71,7 +71,6 @@ config MTD_DATAFLASH_WRITE_VERIFY
 config MTD_DATAFLASH_OTP
 	bool "DataFlash OTP support (Security Register)"
 	depends on MTD_DATAFLASH
-	select HAVE_MTD_OTP
 	help
 	  Newer DataFlash chips (revisions C and D) support 128 bytes of
 	  one-time-programmable (OTP) data.  The first half may be written
@@ -205,69 +204,6 @@ config MTD_BLOCK2MTD
 
 comment "Disk-On-Chip Device Drivers"
 
-config MTD_DOC2000
-	tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)"
-	depends on MTD_NAND
-	select MTD_DOCPROBE
-	select MTD_NAND_IDS
-	---help---
-	  This provides an MTD device driver for the M-Systems DiskOnChip
-	  2000 and Millennium devices.  Originally designed for the DiskOnChip
-	  2000, it also now includes support for the DiskOnChip Millennium.
-	  If you have problems with this driver and the DiskOnChip Millennium,
-	  you may wish to try the alternative Millennium driver below. To use
-	  the alternative driver, you will need to undefine DOC_SINGLE_DRIVER
-	  in the <file:drivers/mtd/devices/docprobe.c> source code.
-
-	  If you use this device, you probably also want to enable the NFTL
-	  'NAND Flash Translation Layer' option below, which is used to
-	  emulate a block device by using a kind of file system on the flash
-	  chips.
-
-	  NOTE: This driver is deprecated and will probably be removed soon.
-	  Please try the new DiskOnChip driver under "NAND Flash Device
-	  Drivers".
-
-config MTD_DOC2001
-	tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)"
-	depends on MTD_NAND
-	select MTD_DOCPROBE
-	select MTD_NAND_IDS
-	---help---
-	  This provides an alternative MTD device driver for the M-Systems
-	  DiskOnChip Millennium devices.  Use this if you have problems with
-	  the combined DiskOnChip 2000 and Millennium driver above.  To get
-	  the DiskOnChip probe code to load and use this driver instead of
-	  the other one, you will need to undefine DOC_SINGLE_DRIVER near
-	  the beginning of <file:drivers/mtd/devices/docprobe.c>.
-
-	  If you use this device, you probably also want to enable the NFTL
-	  'NAND Flash Translation Layer' option below, which is used to
-	  emulate a block device by using a kind of file system on the flash
-	  chips.
-
-	  NOTE: This driver is deprecated and will probably be removed soon.
-	  Please try the new DiskOnChip driver under "NAND Flash Device
-	  Drivers".
-
-config MTD_DOC2001PLUS
-	tristate "M-Systems Disk-On-Chip Millennium Plus"
-	depends on MTD_NAND
-	select MTD_DOCPROBE
-	select MTD_NAND_IDS
-	---help---
-	  This provides an MTD device driver for the M-Systems DiskOnChip
-	  Millennium Plus devices.
-
-	  If you use this device, you probably also want to enable the INFTL
-	  'Inverse NAND Flash Translation Layer' option below, which is used
-	  to emulate a block device by using a kind of file system on the
-	  flash chips.
-
-	  NOTE: This driver will soon be replaced by the new DiskOnChip driver
-	  under "NAND Flash Device Drivers" (currently that driver does not
-	  support all Millennium Plus devices).
-
 config MTD_DOCG3
 	tristate "M-Systems Disk-On-Chip G3"
 	select BCH
diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile
index 369a1943ca2..d83bd73096f 100644
--- a/drivers/mtd/devices/Makefile
+++ b/drivers/mtd/devices/Makefile
@@ -2,12 +2,7 @@
 # linux/drivers/mtd/devices/Makefile
 #
 
-obj-$(CONFIG_MTD_DOC2000)	+= doc2000.o
-obj-$(CONFIG_MTD_DOC2001)	+= doc2001.o
-obj-$(CONFIG_MTD_DOC2001PLUS)	+= doc2001plus.o
 obj-$(CONFIG_MTD_DOCG3)		+= docg3.o
-obj-$(CONFIG_MTD_DOCPROBE)	+= docprobe.o
-obj-$(CONFIG_MTD_DOCECC)	+= docecc.o
 obj-$(CONFIG_MTD_SLRAM)		+= slram.o
 obj-$(CONFIG_MTD_PHRAM)		+= phram.o
 obj-$(CONFIG_MTD_PMC551)	+= pmc551.o
diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c
index 95266285acb..18e7761137a 100644
--- a/drivers/mtd/devices/bcm47xxsflash.c
+++ b/drivers/mtd/devices/bcm47xxsflash.c
@@ -10,7 +10,7 @@
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
 
-static const char *probes[] = { "bcm47xxpart", NULL };
+static const char * const probes[] = { "bcm47xxpart", NULL };
 
 static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
 			      size_t *retlen, u_char *buf)
@@ -61,6 +61,17 @@ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
 	}
 	sflash->priv = b47s;
 
+	b47s->bcma_cc = container_of(sflash, struct bcma_drv_cc, sflash);
+
+	switch (b47s->bcma_cc->capabilities & BCMA_CC_CAP_FLASHT) {
+	case BCMA_CC_FLASHT_STSER:
+		b47s->type = BCM47XXSFLASH_TYPE_ST;
+		break;
+	case BCMA_CC_FLASHT_ATSER:
+		b47s->type = BCM47XXSFLASH_TYPE_ATMEL;
+		break;
+	}
+
 	b47s->window = sflash->window;
 	b47s->blocksize = sflash->blocksize;
 	b47s->numblocks = sflash->numblocks;
diff --git a/drivers/mtd/devices/bcm47xxsflash.h b/drivers/mtd/devices/bcm47xxsflash.h
index ebf6f710e23..f22f8c46dfc 100644
--- a/drivers/mtd/devices/bcm47xxsflash.h
+++ b/drivers/mtd/devices/bcm47xxsflash.h
@@ -3,7 +3,66 @@
 
 #include <linux/mtd/mtd.h>
 
+/* Used for ST flashes only. */
+#define OPCODE_ST_WREN		0x0006		/* Write Enable */
+#define OPCODE_ST_WRDIS		0x0004		/* Write Disable */
+#define OPCODE_ST_RDSR		0x0105		/* Read Status Register */
+#define OPCODE_ST_WRSR		0x0101		/* Write Status Register */
+#define OPCODE_ST_READ		0x0303		/* Read Data Bytes */
+#define OPCODE_ST_PP		0x0302		/* Page Program */
+#define OPCODE_ST_SE		0x02d8		/* Sector Erase */
+#define OPCODE_ST_BE		0x00c7		/* Bulk Erase */
+#define OPCODE_ST_DP		0x00b9		/* Deep Power-down */
+#define OPCODE_ST_RES		0x03ab		/* Read Electronic Signature */
+#define OPCODE_ST_CSA		0x1000		/* Keep chip select asserted */
+#define OPCODE_ST_SSE		0x0220		/* Sub-sector Erase */
+
+/* Used for Atmel flashes only. */
+#define OPCODE_AT_READ				0x07e8
+#define OPCODE_AT_PAGE_READ			0x07d2
+#define OPCODE_AT_STATUS			0x01d7
+#define OPCODE_AT_BUF1_WRITE			0x0384
+#define OPCODE_AT_BUF2_WRITE			0x0387
+#define OPCODE_AT_BUF1_ERASE_PROGRAM		0x0283
+#define OPCODE_AT_BUF2_ERASE_PROGRAM		0x0286
+#define OPCODE_AT_BUF1_PROGRAM			0x0288
+#define OPCODE_AT_BUF2_PROGRAM			0x0289
+#define OPCODE_AT_PAGE_ERASE			0x0281
+#define OPCODE_AT_BLOCK_ERASE			0x0250
+#define OPCODE_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
+#define OPCODE_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
+#define OPCODE_AT_BUF1_LOAD			0x0253
+#define OPCODE_AT_BUF2_LOAD			0x0255
+#define OPCODE_AT_BUF1_COMPARE			0x0260
+#define OPCODE_AT_BUF2_COMPARE			0x0261
+#define OPCODE_AT_BUF1_REPROGRAM		0x0258
+#define OPCODE_AT_BUF2_REPROGRAM		0x0259
+
+/* Status register bits for ST flashes */
+#define SR_ST_WIP		0x01		/* Write In Progress */
+#define SR_ST_WEL		0x02		/* Write Enable Latch */
+#define SR_ST_BP_MASK		0x1c		/* Block Protect */
+#define SR_ST_BP_SHIFT		2
+#define SR_ST_SRWD		0x80		/* Status Register Write Disable */
+
+/* Status register bits for Atmel flashes */
+#define SR_AT_READY		0x80
+#define SR_AT_MISMATCH		0x40
+#define SR_AT_ID_MASK		0x38
+#define SR_AT_ID_SHIFT		3
+
+struct bcma_drv_cc;
+
+enum bcm47xxsflash_type {
+	BCM47XXSFLASH_TYPE_ATMEL,
+	BCM47XXSFLASH_TYPE_ST,
+};
+
 struct bcm47xxsflash {
+	struct bcma_drv_cc *bcma_cc;
+
+	enum bcm47xxsflash_type type;
+
 	u32 window;
 	u32 blocksize;
 	u16 numblocks;
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
deleted file mode 100644
index a4eb8b5b85e..00000000000
--- a/drivers/mtd/devices/doc2000.c
+++ /dev/null
@@ -1,1178 +0,0 @@
-
-/*
- * Linux driver for Disk-On-Chip 2000 and Millennium
- * (c) 1999 Machine Vision Holdings, Inc.
- * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/mutex.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/doc2000.h>
-
-#define DOC_SUPPORT_2000
-#define DOC_SUPPORT_2000TSOP
-#define DOC_SUPPORT_MILLENNIUM
-
-#ifdef DOC_SUPPORT_2000
-#define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k)
-#else
-#define DoC_is_2000(doc) (0)
-#endif
-
-#if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM)
-#define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil)
-#else
-#define DoC_is_Millennium(doc) (0)
-#endif
-
-/* #define ECC_DEBUG */
-
-/* I have no idea why some DoC chips can not use memcpy_from|to_io().
- * This may be due to the different revisions of the ASIC controller built-in or
- * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
- * this:
- #undef USE_MEMCPY
-*/
-
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
-		    size_t *retlen, u_char *buf);
-static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
-		     size_t *retlen, const u_char *buf);
-static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
-			struct mtd_oob_ops *ops);
-static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
-			 struct mtd_oob_ops *ops);
-static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
-			 size_t *retlen, const u_char *buf);
-static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
-
-static struct mtd_info *doc2klist = NULL;
-
-/* Perform the required delay cycles by reading from the appropriate register */
-static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles)
-{
-	volatile char dummy;
-	int i;
-
-	for (i = 0; i < cycles; i++) {
-		if (DoC_is_Millennium(doc))
-			dummy = ReadDOC(doc->virtadr, NOP);
-		else
-			dummy = ReadDOC(doc->virtadr, DOCStatus);
-	}
-
-}
-
-/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
-static int _DoC_WaitReady(struct DiskOnChip *doc)
-{
-	void __iomem *docptr = doc->virtadr;
-	unsigned long timeo = jiffies + (HZ * 10);
-
-	pr_debug("_DoC_WaitReady called for out-of-line wait\n");
-
-	/* Out-of-line routine to wait for chip response */
-	while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
-		/* issue 2 read from NOP register after reading from CDSNControl register
-	   	see Software Requirement 11.4 item 2. */
-		DoC_Delay(doc, 2);
-
-		if (time_after(jiffies, timeo)) {
-			pr_debug("_DoC_WaitReady timed out.\n");
-			return -EIO;
-		}
-		udelay(1);
-		cond_resched();
-	}
-
-	return 0;
-}
-
-static inline int DoC_WaitReady(struct DiskOnChip *doc)
-{
-	void __iomem *docptr = doc->virtadr;
-
-	/* This is inline, to optimise the common case, where it's ready instantly */
-	int ret = 0;
-
-	/* 4 read form NOP register should be issued in prior to the read from CDSNControl
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(doc, 4);
-
-	if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
-		/* Call the out-of-line routine to wait */
-		ret = _DoC_WaitReady(doc);
-
-	/* issue 2 read from NOP register after reading from CDSNControl register
-	   see Software Requirement 11.4 item 2. */
-	DoC_Delay(doc, 2);
-
-	return ret;
-}
-
-/* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to
-   bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
-   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
-
-static int DoC_Command(struct DiskOnChip *doc, unsigned char command,
-			      unsigned char xtraflags)
-{
-	void __iomem *docptr = doc->virtadr;
-
-	if (DoC_is_2000(doc))
-		xtraflags |= CDSN_CTRL_FLASH_IO;
-
-	/* Assert the CLE (Command Latch Enable) line to the flash chip */
-	WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	if (DoC_is_Millennium(doc))
-		WriteDOC(command, docptr, CDSNSlowIO);
-
-	/* Send the command */
-	WriteDOC_(command, docptr, doc->ioreg);
-	if (DoC_is_Millennium(doc))
-		WriteDOC(command, docptr, WritePipeTerm);
-
-	/* Lower the CLE line */
-	WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */
-	return DoC_WaitReady(doc);
-}
-
-/* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to
-   bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
-   required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
-
-static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs,
-		       unsigned char xtraflags1, unsigned char xtraflags2)
-{
-	int i;
-	void __iomem *docptr = doc->virtadr;
-
-	if (DoC_is_2000(doc))
-		xtraflags1 |= CDSN_CTRL_FLASH_IO;
-
-	/* Assert the ALE (Address Latch Enable) line to the flash chip */
-	WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
-
-	DoC_Delay(doc, 4);	/* Software requirement 11.4.3 for Millennium */
-
-	/* Send the address */
-	/* Devices with 256-byte page are addressed as:
-	   Column (bits 0-7), Page (bits 8-15, 16-23, 24-31)
-	   * there is no device on the market with page256
-	   and more than 24 bits.
-	   Devices with 512-byte