mfd: db8500 clock handling update

This updates the clock handling in the DB8500 PRCMU driver with
the latest findings and API changes related to changes in the
backing firmware in the PRCMU.

- Add the necessary interfaces to get the frequencies of the
  clocks and set the rate of some of the clocks.
- Add support for controlling the clocks PLLSOC0, PLLDSI,
  DSI0, DSI1 and DSI escape clocks (DSInESCCLK).
- Correct the PLLSDI enable/disable sequence by using the
  DSIPLL_CLAMPI bit.

After this we will have the interfaces and code to implement the
U8500 clock framework properly.

Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 587 insertions, 79 deletions

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 5179abf9472..94593271932 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -132,6 +132,8 @@
 #define PRCM_REQ_MB1_ARM_OPP			(PRCM_REQ_MB1 + 0x0)
 #define PRCM_REQ_MB1_APE_OPP			(PRCM_REQ_MB1 + 0x1)
 #define PRCM_REQ_MB1_PLL_ON_OFF			(PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC0_OFF	0x1
+#define PLL_SOC0_ON	0x2
 #define PLL_SOC1_OFF	0x4
 #define PLL_SOC1_ON	0x8
 
@@ -420,43 +422,95 @@ static DEFINE_SPINLOCK(gpiocr_lock);
 static __iomem void *tcdm_base;
 
 struct clk_mgt {
-	unsigned int offset;
+	void __iomem *reg;
 	u32 pllsw;
+	int branch;
+	bool clk38div;
+};
+
+enum {
+	PLL_RAW,
+	PLL_FIX,
+	PLL_DIV
 };
 
 static DEFINE_SPINLOCK(clk_mgt_lock);
 
-#define CLK_MGT_ENTRY(_name)[PRCMU_##_name] = { (PRCM_##_name##_MGT_OFF), 0 }
+#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
+	{ (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
 struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
-	CLK_MGT_ENTRY(SGACLK),
-	CLK_MGT_ENTRY(UARTCLK),
-	CLK_MGT_ENTRY(MSP02CLK),
-	CLK_MGT_ENTRY(MSP1CLK),
-	CLK_MGT_ENTRY(I2CCLK),
-	CLK_MGT_ENTRY(SDMMCCLK),
-	CLK_MGT_ENTRY(SLIMCLK),
-	CLK_MGT_ENTRY(PER1CLK),
-	CLK_MGT_ENTRY(PER2CLK),
-	CLK_MGT_ENTRY(PER3CLK),
-	CLK_MGT_ENTRY(PER5CLK),
-	CLK_MGT_ENTRY(PER6CLK),
-	CLK_MGT_ENTRY(PER7CLK),
-	CLK_MGT_ENTRY(LCDCLK),
-	CLK_MGT_ENTRY(BMLCLK),
-	CLK_MGT_ENTRY(HSITXCLK),
-	CLK_MGT_ENTRY(HSIRXCLK),
-	CLK_MGT_ENTRY(HDMICLK),
-	CLK_MGT_ENTRY(APEATCLK),
-	CLK_MGT_ENTRY(APETRACECLK),
-	CLK_MGT_ENTRY(MCDECLK),
-	CLK_MGT_ENTRY(IPI2CCLK),
-	CLK_MGT_ENTRY(DSIALTCLK),
-	CLK_MGT_ENTRY(DMACLK),
-	CLK_MGT_ENTRY(B2R2CLK),
-	CLK_MGT_ENTRY(TVCLK),
-	CLK_MGT_ENTRY(SSPCLK),
-	CLK_MGT_ENTRY(RNGCLK),
-	CLK_MGT_ENTRY(UICCCLK),
+	CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
+	CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
+	CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
+	CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
+	CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
+	CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
+};
+
+struct dsiclk {
+	u32 divsel_mask;
+	u32 divsel_shift;
+	u32 divsel;
+};
+
+static struct dsiclk dsiclk[2] = {
+	{
+		.divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
+		.divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
+		.divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+	},
+	{
+		.divsel_mask = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
+		.divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
+		.divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+	}
+};
+
+struct dsiescclk {
+	u32 en;
+	u32 div_mask;
+	u32 div_shift;
+};
+
+static struct dsiescclk dsiescclk[3] = {
+	{
+		.en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
+		.div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
+		.div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
+	},
+	{
+		.en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
+		.div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
+		.div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
+	},
+	{
+		.en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
+		.div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
+		.div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
+	}
 };
 
 static struct regulator *hwacc_regulator[NUM_HW_ACC];
@@ -910,6 +964,7 @@ int db8500_prcmu_set_ddr_opp(u8 opp)
 
 	return 0;
 }
+
 /**
  * db8500_set_ape_opp - set the appropriate APE OPP
  * @opp: The new APE operating point to which transition is to be made
@@ -1031,7 +1086,9 @@ static int request_pll(u8 clock, bool enable)
 {
 	int r = 0;
 
-	if (clock == PRCMU_PLLSOC1)
+	if (clock == PRCMU_PLLSOC0)
+		clock = (enable ? PLL_SOC0_ON : PLL_SOC0_OFF);
+	else if (clock == PRCMU_PLLSOC1)
 		clock = (enable ? PLL_SOC1_ON : PLL_SOC1_OFF);
 	else
 		return -EINVAL;
@@ -1350,7 +1407,7 @@ static int request_timclk(bool enable)
 	return 0;
 }
 
-static int request_reg_clock(u8 clock, bool enable)
+static int request_clock(u8 clock, bool enable)
 {
 	u32 val;
 	unsigned long flags;
@@ -1361,14 +1418,14 @@ static int request_reg_clock(u8 clock, bool enable)
 	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
 		cpu_relax();
 
-	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
+	val = readl(clk_mgt[clock].reg);
 	if (enable) {
 		val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
 	} else {
 		clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
 		val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
 	}
-	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
+	writel(val, clk_mgt[clock].reg);
 
 	/* Release the HW semaphore. */
 	writel(0, PRCM_SEM);
@@ -1388,7 +1445,7 @@ static int request_sga_clock(u8 clock, bool enable)
 		writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
 	}
 
-	ret = request_reg_clock(clock, enable);
+	ret = request_clock(clock, enable);
 
 	if (!ret && !enable) {
 		val = readl(PRCM_CGATING_BYPASS);
@@ -1398,6 +1455,78 @@ static int request_sga_clock(u8 clock, bool enable)
 	return ret;
 }
 
+static inline bool plldsi_locked(void)
+{
+	return (readl(PRCM_PLLDSI_LOCKP) &
+		(PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+		 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
+		(PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+		 PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
+}
+
+static int request_plldsi(bool enable)
+{
+	int r = 0;
+	u32 val;
+
+	writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+		PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI), (enable ?
+		PRCM_MMIP_LS_CLAMP_CLR : PRCM_MMIP_LS_CLAMP_SET));
+
+	val = readl(PRCM_PLLDSI_ENABLE);
+	if (enable)
+		val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+	else
+		val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+	writel(val, PRCM_PLLDSI_ENABLE);
+
+	if (enable) {
+		unsigned int i;
+		bool locked = plldsi_locked();
+
+		for (i = 10; !locked && (i > 0); --i) {
+			udelay(100);
+			locked = plldsi_locked();
+		}
+		if (locked) {
+			writel(PRCM_APE_RESETN_DSIPLL_RESETN,
+				PRCM_APE_RESETN_SET);
+		} else {
+			writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+				PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
+				PRCM_MMIP_LS_CLAMP_SET);
+			val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+			writel(val, PRCM_PLLDSI_ENABLE);
+			r = -EAGAIN;
+		}
+	} else {
+		writel(PRCM_APE_RESETN_DSIPLL_RESETN, PRCM_APE_RESETN_CLR);
+	}
+	return r;
+}
+
+static int request_dsiclk(u8 n, bool enable)
+{
+	u32 val;
+
+	val = readl(PRCM_DSI_PLLOUT_SEL);
+	val &= ~dsiclk[n].divsel_mask;
+	val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
+		dsiclk[n].divsel_shift);
+	writel(val, PRCM_DSI_PLLOUT_SEL);
+	return 0;
+}
+
+static int request_dsiescclk(u8 n, bool enable)
+{
+	u32 val;
+
+	val = readl(PRCM_DSITVCLK_DIV);
+	enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
+	writel(val, PRCM_DSITVCLK_DIV);
+	return 0;
+}
+
 /**
  * db8500_prcmu_request_clock() - Request for a clock to be enabled or disabled.
  * @clock:      The clock for which the request is made.
@@ -1408,21 +1537,435 @@ static int request_sga_clock(u8 clock, bool enable)
  */
 int db8500_prcmu_request_clock(u8 clock, bool enable)
 {
-	switch(clock) {
-	case PRCMU_SGACLK:
+	if (clock == PRCMU_SGACLK)
 		return request_sga_clock(clock, enable);
-	case PRCMU_TIMCLK:
+	else if (clock < PRCMU_NUM_REG_CLOCKS)
+		return request_clock(clock, enable);
+	else if (clock == PRCMU_TIMCLK)
 		return request_timclk(enable);
-	case PRCMU_SYSCLK:
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		return request_dsiclk((clock - PRCMU_DSI0CLK), enable);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
+	else if (clock == PRCMU_PLLDSI)
+		return request_plldsi(enable);
+	else if (clock == PRCMU_SYSCLK)
 		return request_sysclk(enable);
-	case PRCMU_PLLSOC1:
+	else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
 		return request_pll(clock, enable);
+	else
+		return -EINVAL;
+}
+
+static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
+	int branch)
+{
+	u64 rate;
+	u32 val;
+	u32 d;
+	u32 div = 1;
+
+	val = readl(reg);
+
+	rate = src_rate;
+	rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
+
+	d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
+	if (d > 1)
+		div *= d;
+
+	d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
+	if (d > 1)
+		div *= d;
+
+	if (val & PRCM_PLL_FREQ_SELDIV2)
+		div *= 2;
+
+	if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
+		(val & PRCM_PLL_FREQ_DIV2EN) &&
+		((reg == PRCM_PLLSOC0_FREQ) ||
+		 (reg == PRCM_PLLDDR_FREQ))))
+		div *= 2;
+
+	(void)do_div(rate, div);
+
+	return (unsigned long)rate;
+}
+
+#define ROOT_CLOCK_RATE 38400000
+
+static unsigned long clock_rate(u8 clock)
+{
+	u32 val;
+	u32 pllsw;
+	unsigned long rate = ROOT_CLOCK_RATE;
+
+	val = readl(clk_mgt[clock].reg);
+
+	if (val & PRCM_CLK_MGT_CLK38) {
+		if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
+			rate /= 2;
+		return rate;
+	}
+
+	val |= clk_mgt[clock].pllsw;
+	pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
+
+	if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+		rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
+	else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+		rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
+	else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
+		rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
+	else
+		return 0;
+
+	if ((clock == PRCMU_SGACLK) &&
+		(val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
+		u64 r = (rate * 10);
+
+		(void)do_div(r, 25);
+		return (unsigned long)r;
+	}
+	val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+	if (val)
+		return rate / val;
+	else
+		return 0;
+}
+
+static unsigned long dsiclk_rate(u8 n)
+{
+	u32 divsel;
+	u32 div = 1;
+
+	divsel = readl(PRCM_DSI_PLLOUT_SEL);
+	divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
+
+	if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
+		divsel = dsiclk[n].divsel;
+
+	switch (divsel) {
+	case PRCM_DSI_PLLOUT_SEL_PHI_4:
+		div *= 2;
+	case PRCM_DSI_PLLOUT_SEL_PHI_2:
+		div *= 2;
+	case PRCM_DSI_PLLOUT_SEL_PHI:
+		return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+			PLL_RAW) / div;
 	default:
-		break;
+		return 0;
 	}
+}
+
+static unsigned long dsiescclk_rate(u8 n)
+{
+	u32 div;
+
+	div = readl(PRCM_DSITVCLK_DIV);
+	div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
+	return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
+}
+
+unsigned long prcmu_clock_rate(u8 clock)
+{
 	if (clock < PRCMU_NUM_REG_CLOCKS)
-		return request_reg_clock(clock, enable);
-	return -EINVAL;
+		return clock_rate(clock);
+	else if (clock == PRCMU_TIMCLK)
+		return ROOT_CLOCK_RATE / 16;
+	else if (clock == PRCMU_SYSCLK)
+		return ROOT_CLOCK_RATE;
+	else if (clock == PRCMU_PLLSOC0)
+		return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+	else if (clock == PRCMU_PLLSOC1)
+		return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+	else if (clock == PRCMU_PLLDDR)
+		return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+	else if (clock == PRCMU_PLLDSI)
+		return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+			PLL_RAW);
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		return dsiclk_rate(clock - PRCMU_DSI0CLK);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
+	else
+		return 0;
+}
+
+static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
+{
+	if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
+		return ROOT_CLOCK_RATE;
+	clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
+	if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+		return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
+	else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+		return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
+	else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
+		return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
+	else
+		return 0;
+}
+
+static u32 clock_divider(unsigned long src_rate, unsigned long rate)
+{
+	u32 div;
+
+	div = (src_rate / rate);
+	if (div == 0)
+		return 1;
+	if (rate < (src_rate / div))
+		div++;
+	return div;
+}
+
+static long round_clock_rate(u8 clock, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+	unsigned long src_rate;
+	long rounded_rate;
+
+	val = readl(clk_mgt[clock].reg);
+	src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+		clk_mgt[clock].branch);
+	div = clock_divider(src_rate, rate);
+	if (val & PRCM_CLK_MGT_CLK38) {
+		if (clk_mgt[clock].clk38div) {
+			if (div > 2)
+				div = 2;
+		} else {
+			div = 1;
+		}
+	} else if ((clock == PRCMU_SGACLK) && (div == 3)) {
+		u64 r = (src_rate * 10);
+
+		(void)do_div(r, 25);
+		if (r <= rate)
+			return (unsigned long)r;
+	}
+	rounded_rate = (src_rate / min(div, (u32)31));
+
+	return rounded_rate;
+}
+
+#define MIN_PLL_VCO_RATE 600000000ULL
+#define MAX_PLL_VCO_RATE 1680640000ULL
+
+static long round_plldsi_rate(unsigned long rate)
+{
+	long rounded_rate = 0;
+	unsigned long src_rate;
+	unsigned long rem;
+	u32 r;
+
+	src_rate = clock_rate(PRCMU_HDMICLK);
+	rem = rate;
+
+	for (r = 7; (rem > 0) && (r > 0); r--) {
+		u64 d;
+
+		d = (r * rate);
+		(void)do_div(d, src_rate);
+		if (d < 6)
+			d = 6;
+		else if (d > 255)
+			d = 255;
+		d *= src_rate;
+		if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
+			((r * MAX_PLL_VCO_RATE) < (2 * d)))
+			continue;
+		(void)do_div(d, r);
+		if (rate < d) {
+			if (rounded_rate == 0)
+				rounded_rate = (long)d;
+			break;
+		}
+		if ((rate - d) < rem) {
+			rem = (rate - d);
+			rounded_rate = (long)d;
+		}
+	}
+	return rounded_rate;
+}
+
+static long round_dsiclk_rate(unsigned long rate)
+{
+	u32 div;
+	unsigned long src_rate;
+	long rounded_rate;
+
+	src_rate = pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK),
+		PLL_RAW);
+	div = clock_divider(src_rate, rate);
+	rounded_rate = (src_rate / ((div > 2) ? 4 : div));
+
+	return rounded_rate;
+}
+
+static long round_dsiescclk_rate(unsigned long rate)
+{
+	u32 div;
+	unsigned long src_rate;
+	long rounded_rate;
+
+	src_rate = clock_rate(PRCMU_TVCLK);
+	div = clock_divider(src_rate, rate);
+	rounded_rate = (src_rate / min(div, (u32)255));
+
+	return rounded_rate;
+}
+
+long prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+	if (clock < PRCMU_NUM_REG_CLOCKS)
+		return round_clock_rate(clock, rate);
+	else if (clock == PRCMU_PLLDSI)
+		return round_plldsi_rate(rate);
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		return round_dsiclk_rate(rate);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		return round_dsiescclk_rate(rate);
+	else
+		return (long)prcmu_clock_rate(clock);
+}
+
+static void set_clock_rate(u8 clock, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+	unsigned long src_rate;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_mgt_lock, flags);
+
+	/* Grab the HW semaphore. */
+	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+		cpu_relax();
+
+	val = readl(clk_mgt[clock].reg);
+	src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+		clk_mgt[clock].branch);
+	div = clock_divider(src_rate, rate);
+	if (val & PRCM_CLK_MGT_CLK38) {
+		if (clk_mgt[clock].clk38div) {
+			if (div > 1)
+				val |= PRCM_CLK_MGT_CLK38DIV;
+			else
+				val &= ~PRCM_CLK_MGT_CLK38DIV;
+		}
+	} else if (clock == PRCMU_SGACLK) {
+		val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
+			PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
+		if (div == 3) {
+			u64 r = (src_rate * 10);
+
+			(void)do_div(r, 25);
+			if (r <= rate) {
+				val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
+				div = 0;
+			}
+		}
+		val |= min(div, (u32)31);
+	} else {
+		val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
+		val |= min(div, (u32)31);
+	}
+	writel(val, clk_mgt[clock].reg);
+
+	/* Release the HW semaphore. */
+	writel(0, PRCM_SEM);
+
+	spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
+static int set_plldsi_rate(unsigned long rate)
+{
+	unsigned long src_rate;
+	unsigned long rem;
+	u32 pll_freq = 0;
+	u32 r;
+
+	src_rate = clock_rate(PRCMU_HDMICLK);
+	rem = rate;
+
+	for (r = 7; (rem > 0) && (r > 0); r--) {
+		u64 d;
+		u64 hwrate;
+
+		d = (r * rate);
+		(void)do_div(d, src_rate);
+		if (d < 6)
+			d = 6;
+		else if (d > 255)
+			d = 255;
+		hwrate = (d * src_rate);
+		if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
+			((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
+			continue;
+		(void)do_div(hwrate, r);
+		if (rate < hwrate) {
+			if (pll_freq == 0)
+				pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+					(r << PRCM_PLL_FREQ_R_SHIFT));
+			break;
+		}
+		if ((rate - hwrate) < rem) {
+			rem = (rate - hwrate);
+			pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+				(r << PRCM_PLL_FREQ_R_SHIFT));
+		}
+	}
+	if (pll_freq == 0)
+		return -EINVAL;
+
+	pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
+	writel(pll_freq, PRCM_PLLDSI_FREQ);
+
+	return 0;
+}
+
+static void set_dsiclk_rate(u8 n, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+
+	div = clock_divider(pll_rate(PRCM_PLLDSI_FREQ,
+			clock_rate(PRCMU_HDMICLK), PLL_RAW), rate);
+
+	dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
+			   (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
+			   /* else */	PRCM_DSI_PLLOUT_SEL_PHI_4;
+
+	val = readl(PRCM_DSI_PLLOUT_SEL);
+	val &= ~dsiclk[n].divsel_mask;
+	val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
+	writel(val, PRCM_DSI_PLLOUT_SEL);
+}
+
+static void set_dsiescclk_rate(u8 n, unsigned long rate)
+{
+	u32 val;
+	u32 div;
+
+	div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
+	val = readl(PRCM_DSITVCLK_DIV);
+	val &= ~dsiescclk[n].div_mask;
+	val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
+	writel(val, PRCM_DSITVCLK_DIV);
+}
+
+int prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
+	if (clock < PRCMU_NUM_REG_CLOCKS)
+		set_clock_rate(clock, rate);
+	else if (clock == PRCMU_PLLDSI)
+		return set_plldsi_rate(rate);
+	else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+		set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate);
+	else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+		set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
+	return 0;
 }
 
 int db8500_prcmu_config_esram0_deep_sleep(u8 state)
@@ -1594,41 +2137,6 @@ int db8500_prcmu_load_a9wdog(u8 id, u32 timeout)
 }
 
 /**
- * prcmu_set_clock_divider() - Configure the clock divider.
- * @clock:	The clock for which the request is made.
- * @divider:	The clock divider. (< 32)
- *
- * This function should only be used by the clock implementation.
- * Do not use it from any other place!
- */
-int prcmu_set_clock_divider(u8 clock, u8 divider)
-{
-	u32 val;
-	unsigned long flags;
-
-	if ((clock >= PRCMU_NUM_REG_CLOCKS) || (divider < 1) || (31 < divider))
-		return -EINVAL;
-
-	spin_lock_irqsave(&clk_mgt_lock, flags);
-
-	/* Grab the HW semaphore. */
-	while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
-		cpu_relax();
-
-	val = readl(_PRCMU_BASE + clk_mgt[clock].offset);
-	val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK);
-	val |= (u32)divider;
-	writel(val, (_PRCMU_BASE + clk_mgt[clock].offset));
-
-	/* Release the HW semaphore. */
-	writel(0, PRCM_SEM);
-
-	spin_unlock_irqrestore(&clk_mgt_lock, flags);
-
-	return 0;
-}
-
-/**
  * prcmu_abb_read() - Read register value(s) from the ABB.
  * @slave:	The I2C slave address.
  * @reg:	The (start) register address.