Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - increase the limit of rows and columns
  Input: wacom - fix error path in wacom_probe()
  Input: ads7846 - check proper condition when freeing gpio
  Revert "Input: do not pass injected events back to the originating handler"
  Input: sysrq - rework re-inject logic
  Input: serio - clear pending rescans after sysfs driver rebind
  Input: rotary_encoder - use proper irqflags
  Input: wacom_w8001 - report resolution to userland

6 files changed, 54 insertions, 51 deletions

diff --git a/drivers/input/input.c b/drivers/input/input.c
index 7985114beac..11905b6a302 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -75,7 +75,6 @@ static int input_defuzz_abs_event(int value, int old_val, int fuzz)
  * dev->event_lock held and interrupts disabled.
  */
 static void input_pass_event(struct input_dev *dev,
-			     struct input_handler *src_handler,
 			     unsigned int type, unsigned int code, int value)
 {
 	struct input_handler *handler;
@@ -94,15 +93,6 @@ static void input_pass_event(struct input_dev *dev,
 				continue;
 
 			handler = handle->handler;
-
-			/*
-			 * If this is the handler that injected this
-			 * particular event we want to skip it to avoid
-			 * filters firing again and again.
-			 */
-			if (handler == src_handler)
-				continue;
-
 			if (!handler->filter) {
 				if (filtered)
 					break;
@@ -132,7 +122,7 @@ static void input_repeat_key(unsigned long data)
 	if (test_bit(dev->repeat_key, dev->key) &&
 	    is_event_supported(dev->repeat_key, dev->keybit, KEY_MAX)) {
 
-		input_pass_event(dev, NULL, EV_KEY, dev->repeat_key, 2);
+		input_pass_event(dev, EV_KEY, dev->repeat_key, 2);
 
 		if (dev->sync) {
 			/*
@@ -141,7 +131,7 @@ static void input_repeat_key(unsigned long data)
 			 * Otherwise assume that the driver will send
 			 * SYN_REPORT once it's done.
 			 */
-			input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
+			input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
 		}
 
 		if (dev->rep[REP_PERIOD])
@@ -174,7 +164,6 @@ static void input_stop_autorepeat(struct input_dev *dev)
 #define INPUT_PASS_TO_ALL	(INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
 
 static int input_handle_abs_event(struct input_dev *dev,
-				  struct input_handler *src_handler,
 				  unsigned int code, int *pval)
 {
 	bool is_mt_event;
@@ -218,15 +207,13 @@ static int input_handle_abs_event(struct input_dev *dev,
 	/* Flush pending "slot" event */
 	if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
 		input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
-		input_pass_event(dev, src_handler,
-				 EV_ABS, ABS_MT_SLOT, dev->slot);
+		input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
 	}
 
 	return INPUT_PASS_TO_HANDLERS;
 }
 
 static void input_handle_event(struct input_dev *dev,
-			       struct input_handler *src_handler,
 			       unsigned int type, unsigned int code, int value)
 {
 	int disposition = INPUT_IGNORE_EVENT;
@@ -279,8 +266,7 @@ static void input_handle_event(struct input_dev *dev,
 
 	case EV_ABS:
 		if (is_event_supported(code, dev->absbit, ABS_MAX))
-			disposition = input_handle_abs_event(dev, src_handler,
-							     code, &value);
+			disposition = input_handle_abs_event(dev, code, &value);
 
 		break;
 
@@ -338,7 +324,7 @@ static void input_handle_event(struct input_dev *dev,
 		dev->event(dev, type, code, value);
 
 	if (disposition & INPUT_PASS_TO_HANDLERS)
-		input_pass_event(dev, src_handler, type, code, value);
+		input_pass_event(dev, type, code, value);
 }
 
 /**
@@ -367,7 +353,7 @@ void input_event(struct input_dev *dev,
 
 		spin_lock_irqsave(&dev->event_lock, flags);
 		add_input_randomness(type, code, value);
-		input_handle_event(dev, NULL, type, code, value);
+		input_handle_event(dev, type, code, value);
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	}
 }
@@ -397,8 +383,7 @@ void input_inject_event(struct input_handle *handle,
 		rcu_read_lock();
 		grab = rcu_dereference(dev->grab);
 		if (!grab || grab == handle)
-			input_handle_event(dev, handle->handler,
-					   type, code, value);
+			input_handle_event(dev, type, code, value);
 		rcu_read_unlock();
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
@@ -611,10 +596,10 @@ static void input_dev_release_keys(struct input_dev *dev)
 		for (code = 0; code <= KEY_MAX; code++) {
 			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
 			    __test_and_clear_bit(code, dev->key)) {
-				input_pass_event(dev, NULL, EV_KEY, code, 0);
+				input_pass_event(dev, EV_KEY, code, 0);
 			}
 		}
-		input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
+		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
 	}
 }
 
@@ -889,9 +874,9 @@ int input_set_keycode(struct input_dev *dev,
 	    !is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
 	    __test_and_clear_bit(old_keycode, dev->key)) {
 
-		input_pass_event(dev, NULL, EV_KEY, old_keycode, 0);
+		input_pass_event(dev, EV_KEY, old_keycode, 0);
 		if (dev->sync)
-			input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
+			input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
 	}
 
  out:
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 1f8e0108962..7e64d01da2b 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -176,7 +176,7 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 
 	/* request the IRQs */
 	err = request_irq(encoder->irq_a, &rotary_encoder_irq,
-			  IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  DRV_NAME, encoder);
 	if (err) {
 		dev_err(&pdev->dev, "unable to request IRQ %d\n",
@@ -185,7 +185,7 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 	}
 
 	err = request_irq(encoder->irq_b, &rotary_encoder_irq,
-			  IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  DRV_NAME, encoder);
 	if (err) {
 		dev_err(&pdev->dev, "unable to request IRQ %d\n",
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index db5b0bca1a1..7c38d1fbabf 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -188,7 +188,8 @@ static void serio_free_event(struct serio_event *event)
 	kfree(event);
 }
 
-static void serio_remove_duplicate_events(struct serio_event *event)
+static void serio_remove_duplicate_events(void *object,
+					  enum serio_event_type type)
 {
 	struct serio_event *e, *next;
 	unsigned long flags;
@@ -196,13 +197,13 @@ static void serio_remove_duplicate_events(struct serio_event *event)
 	spin_lock_irqsave(&serio_event_lock, flags);
 
 	list_for_each_entry_safe(e, next, &serio_event_list, node) {
-		if (event->object == e->object) {
+		if (object == e->object) {
 			/*
 			 * If this event is of different type we should not
 			 * look further - we only suppress duplicate events
 			 * that were sent back-to-back.
 			 */
-			if (event->type != e->type)
+			if (type != e->type)
 				break;
 
 			list_del_init(&e->node);
@@ -245,7 +246,7 @@ static void serio_handle_event(struct work_struct *work)
 			break;
 		}
 
-		serio_remove_duplicate_events(event);
+		serio_remove_duplicate_events(event->object, event->type);
 		serio_free_event(event);
 	}
 
@@ -436,10 +437,12 @@ static ssize_t serio_rebind_driver(struct device *dev, struct device_attribute *
 	} else if (!strncmp(buf, "rescan", count)) {
 		serio_disconnect_port(serio);
 		serio_find_driver(serio);
+		serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
 	} else if ((drv = driver_find(buf, &serio_bus)) != NULL) {
 		serio_disconnect_port(serio);
 		error = serio_bind_driver(serio, to_serio_driver(drv));
 		put_driver(drv);
+		serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
 	} else {
 		error = -EINVAL;
 	}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index fc381498b79..cf8fb9f5d4a 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -519,7 +519,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	/* Retrieve the physical and logical size for OEM devices */
 	error = wacom_retrieve_hid_descriptor(intf, features);
 	if (error)
-		goto fail2;
+		goto fail3;
 
 	wacom_setup_device_quirks(features);
 
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 14ea54b78e4..4bf2316e328 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -941,28 +941,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
 	struct ads7846_platform_data *pdata = spi->dev.platform_data;
 	int err;
 
-	/* REVISIT when the irq can be triggered active-low, or if for some
+	/*
+	 * REVISIT when the irq can be triggered active-low, or if for some
 	 * reason the touchscreen isn't hooked up, we don't need to access
 	 * the pendown state.
 	 */
-	if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
-		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
-		return -EINVAL;
-	}
 
 	if (pdata->get_pendown_state) {
 		ts->get_pendown_state = pdata->get_pendown_state;
-		return 0;
-	}
+	} else if (gpio_is_valid(pdata->gpio_pendown)) {
 
-	err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
-	if (err) {
-		dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
-			pdata->gpio_pendown);
-		return err;
-	}
+		err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+		if (err) {
+			dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+				pdata->gpio_pendown);
+			return err;
+		}
 
-	ts->gpio_pendown = pdata->gpio_pendown;
+		ts->gpio_pendown = pdata->gpio_pendown;
+
+	} else {
+		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -1353,7 +1354,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
  err_put_regulator:
 	regulator_put(ts->reg);
  err_free_gpio:
-	if (ts->gpio_pendown != -1)
+	if (!ts->get_pendown_state)
 		gpio_free(ts->gpio_pendown);
  err_cleanup_filter:
 	if (ts->filter_cleanup)
@@ -1383,8 +1384,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 	regulator_disable(ts->reg);
 	regulator_put(ts->reg);
 
-	if (ts->gpio_pendown != -1)
+	if (!ts->get_pendown_state) {
+		/*
+		 * If we are not using specialized pendown method we must
+		 * have been relying on gpio we set up ourselves.
+		 */
 		gpio_free(ts->gpio_pendown);
+	}
 
 	if (ts->filter_cleanup)
 		ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 5cb8449c909..c14412ef464 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -51,6 +51,10 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL	11	/* control packet */
 #define W8001_PKTLEN_TOUCH2FG	13
 
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION    100
+#define W8001_TOUCH_RESOLUTION  10
+
 struct w8001_coord {
 	u8 rdy;
 	u8 tsw;
@@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
 		query->y = 1024;
 		if (query->panel_res)
 			query->x = query->y = (1 << query->panel_res);
-		query->panel_res = 10;
+		query->panel_res = W8001_TOUCH_RESOLUTION;
 	}
 }
 
@@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001)
 
 		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
 		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+		input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+		input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
 		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
 		if (coord.tilt_x && coord.tilt_y) {
 			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
@@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001)
 		w8001->max_touch_x = touch.x;
 		w8001->max_touch_y = touch.y;
 
-		/* scale to pen maximum */
 		if (w8001->max_pen_x && w8001->max_pen_y) {
+			/* if pen is supported scale to pen maximum */
 			touch.x = w8001->max_pen_x;
 			touch.y = w8001->max_pen_y;
+			touch.panel_res = W8001_PEN_RESOLUTION;
 		}
 
 		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
 		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+		input_abs_set_res(dev, ABS_X, touch.panel_res);
+		input_abs_set_res(dev, ABS_Y, touch.panel_res);
 
 		switch (touch.sensor_id) {
 		case 0: