Merge tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

So here's the Broadwell pull request. From a kernel driver pov there's
two areas with big changes in Broadwell:
- Completely new enumerated interrupt bits. On the plus side it now looks
  fairly unform and sane.
- Completely new pagetable layout.

To ensure minimal impact on existing platforms we've refactored both the
irq and low-level gtt handling code a lot in anticipation of the bdw push.
So now bdw enabling in these areas just plugs in a bunch of vfuncs.

Otherwise it's all fairly harmless adjusting of switch cases and
if-ladders to shovel bdw into the right blocks. So minimized impact on
existing platforms. I've also merged the bdw-stage1 branch into our
-nightly integration branch for the past week to make sure we don't break
anything.

Note that there's still quite a flurry or patches floating around, but
I've figured I'll push this out. I plan to keep the bdw fixes separate
from my usual -fixes stream so that you can reject them easily in case it
still looks like too much churn. Also, bdw is for now hidden behind the
preliminary hw enabling module option. So there's no real pressure to get
follow-up patches all into 3.13.

* tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
  drm/i915: Mask the vblank interrupt on bdw by default
  drm/i915: Wire up cpu fifo underrun reporting support for bdw
  drm/i915: Optimize gen8_enable|disable_vblank functions
  drm/i915: Wire up pipe CRC support for bdw
  drm/i915: Wire up PCH interrupts for bdw
  drm/i915: Wire up port A aux channel
  drm/i915: Fix up the bdw pipe interrupt enable lists
  drm/i915: Optimize pipe irq handling on bdw
  drm/i915/bdw: Take render error interrupt out of the mask
  drm/i915/bdw: Add BDW PCH check first
  drm/i915: Use hsw_crt_get_config on BDW
  drm/i915/bdw: Change dp aux timeout to 600us on DDIA
  drm/i915/bdw: Enable trickle feed on Broadwell
  drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints
  drm/i915/bdw: conservative SBE VUE cache mode
  drm/i915/bdw: Limit SDE poly depth FIFO to 2
  drm/i915/bdw: Sampler power bypass disable
  ddrm/i915/bdw: Disable centroid pixel perf optimization
  drm/i915/bdw: BWGTLB clock gate disable
  drm/i915/bdw: Implement edp PSR workarounds
  ...

1 files changed, 107 insertions, 17 deletions

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 31f4fe27138..1591576a610 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -72,6 +72,45 @@ static const u32 hsw_ddi_translations_hdmi[] = {
 	0x80FFFFFF, 0x00030002, /* 11:	1000		1000		0   */
 };
 
+static const u32 bdw_ddi_translations_edp[] = {
+	0x00FFFFFF, 0x00000012,		/* DP parameters */
+	0x00EBAFFF, 0x00020011,
+	0x00C71FFF, 0x0006000F,
+	0x00FFFFFF, 0x00020011,
+	0x00DB6FFF, 0x0005000F,
+	0x00BEEFFF, 0x000A000C,
+	0x00FFFFFF, 0x0005000F,
+	0x00DB6FFF, 0x000A000C,
+	0x00FFFFFF, 0x000A000C,
+	0x00FFFFFF, 0x00140006		/* HDMI parameters 800mV 0dB*/
+};
+
+static const u32 bdw_ddi_translations_dp[] = {
+	0x00FFFFFF, 0x0007000E,		/* DP parameters */
+	0x00D75FFF, 0x000E000A,
+	0x00BEFFFF, 0x00140006,
+	0x00FFFFFF, 0x000E000A,
+	0x00D75FFF, 0x00180004,
+	0x80CB2FFF, 0x001B0002,
+	0x00F7DFFF, 0x00180004,
+	0x80D75FFF, 0x001B0002,
+	0x80FFFFFF, 0x001B0002,
+	0x00FFFFFF, 0x00140006		/* HDMI parameters 800mV 0dB*/
+};
+
+static const u32 bdw_ddi_translations_fdi[] = {
+	0x00FFFFFF, 0x0001000E,		/* FDI parameters */
+	0x00D75FFF, 0x0004000A,
+	0x00C30FFF, 0x00070006,
+	0x00AAAFFF, 0x000C0000,
+	0x00FFFFFF, 0x0004000A,
+	0x00D75FFF, 0x00090004,
+	0x00C30FFF, 0x000C0000,
+	0x00FFFFFF, 0x00070006,
+	0x00D75FFF, 0x000C0000,
+	0x00FFFFFF, 0x00140006		/* HDMI parameters 800mV 0dB*/
+};
+
 enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
 {
 	struct drm_encoder *encoder = &intel_encoder->base;
@@ -92,8 +131,9 @@ enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
 	}
 }
 
-/* On Haswell, DDI port buffers must be programmed with correct values
- * in advance. The buffer values are different for FDI and DP modes,
+/*
+ * Starting with Haswell, DDI port buffers must be programmed with correct
+ * values in advance. The buffer values are different for FDI and DP modes,
  * but the HDMI/DVI fields are shared among those. So we program the DDI
  * in either FDI or DP modes only, as HDMI connections will work with both
  * of those
@@ -103,10 +143,47 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 reg;
 	int i;
-	const u32 *ddi_translations = (port == PORT_E) ?
-		hsw_ddi_translations_fdi :
-		hsw_ddi_translations_dp;
 	int hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
+	const u32 *ddi_translations_fdi;
+	const u32 *ddi_translations_dp;
+	const u32 *ddi_translations_edp;
+	const u32 *ddi_translations;
+
+	if (IS_BROADWELL(dev)) {
+		ddi_translations_fdi = bdw_ddi_translations_fdi;
+		ddi_translations_dp = bdw_ddi_translations_dp;
+		ddi_translations_edp = bdw_ddi_translations_edp;
+	} else if (IS_HASWELL(dev)) {
+		ddi_translations_fdi = hsw_ddi_translations_fdi;
+		ddi_translations_dp = hsw_ddi_translations_dp;
+		ddi_translations_edp = hsw_ddi_translations_dp;
+	} else {
+		WARN(1, "ddi translation table missing\n");
+		ddi_translations_edp = bdw_ddi_translations_dp;
+		ddi_translations_fdi = bdw_ddi_translations_fdi;
+		ddi_translations_dp = bdw_ddi_translations_dp;
+	}
+
+	switch (port) {
+	case PORT_A:
+		ddi_translations = ddi_translations_edp;
+		break;
+	case PORT_B:
+	case PORT_C:
+		ddi_translations = ddi_translations_dp;
+		break;
+	case PORT_D:
+		if (intel_dpd_is_edp(dev))
+			ddi_translations = ddi_translations_edp;
+		else
+			ddi_translations = ddi_translations_dp;
+		break;
+	case PORT_E:
+		ddi_translations = ddi_translations_fdi;
+		break;
+	default:
+		BUG();
+	}
 
 	for (i = 0, reg = DDI_BUF_TRANS(port);
 	     i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) {
@@ -756,7 +833,8 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
 	struct drm_encoder *encoder = &intel_encoder->base;
-	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum pipe pipe = intel_crtc->pipe;
 	enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
 	enum port port = intel_ddi_get_encoder_port(intel_encoder);
@@ -792,10 +870,11 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
 	if (cpu_transcoder == TRANSCODER_EDP) {
 		switch (pipe) {
 		case PIPE_A:
-			/* Can only use the always-on power well for eDP when
-			 * not using the panel fitter, and when not using motion
-			  * blur mitigation (which we don't support). */
-			if (intel_crtc->config.pch_pfit.enabled)
+			/* On Haswell, can only use the always-on power well for
+			 * eDP when not using the panel fitter, and when not
+			 * using motion blur mitigation (which we don't
+			 * support). */
+			if (IS_HASWELL(dev) && intel_crtc->config.pch_pfit.enabled)
 				temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
 			else
 				temp |= TRANS_DDI_EDP_INPUT_A_ON;
@@ -1156,18 +1235,29 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder)
 
 int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
 {
+	struct drm_device *dev = dev_priv->dev;
 	uint32_t lcpll = I915_READ(LCPLL_CTL);
+	uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK;
 
-	if (lcpll & LCPLL_CD_SOURCE_FCLK)
+	if (lcpll & LCPLL_CD_SOURCE_FCLK) {
 		return 800000;
-	else if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT)
+	} else if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT) {
 		return 450000;
-	else if ((lcpll & LCPLL_CLK_FREQ_MASK) == LCPLL_CLK_FREQ_450)
+	} else if (freq == LCPLL_CLK_FREQ_450) {
 		return 450000;
-	else if (IS_ULT(dev_priv->dev))
-		return 337500;
-	else
-		return 540000;
+	} else if (IS_HASWELL(dev)) {
+		if (IS_ULT(dev))
+			return 337500;
+		else
+			return 540000;
+	} else {
+		if (freq == LCPLL_CLK_FREQ_54O_BDW)
+			return 540000;
+		else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
+			return 337500;
+		else
+			return 675000;
+	}
 }
 
 void intel_ddi_pll_init(struct drm_device *dev)